I'm installing thingsboard on ubuntu 20.04LTS. I followed the installation guides on the thingsboard website. After all done, i entered this address "http://localhost:8081" (i changed the http_bind_port to 8081) but my browser can not reach this address. I checked for the error and received this report:
~$ cat /var/log/thingsboard/thingsboard.log | grep ERROR
2022-03-22 09:58:19,873 [main] ERROR o.s.boot.SpringApplication - Application run failed
2022-03-22 10:05:01,668 [main] ERROR o.s.boot.SpringApplication - Application run failed
Binary file (standard input) matches
Hope anybody can help me. Thank you all.
Related
I am using these steps to use apache pulsar on docker: https://github.com/streamnative/tgip/blob/master/episodes/001/demo.md
I was able to use these steps before to install and use pulsar but for some reason now when am creating a directory, it is going to write protected and pulsar zookeeper container is exiting with following logs as soon as it is created:
ERROR org.apache.zookeeper.server.ZooKeeperServerMain - Unable to access datadir, exiting abnormally
org.apache.zookeeper.server.persistence.FileTxnSnapLog$DatadirException: Unable to create data directory data/zookeeper/version-2
at org.apache.zookeeper.server.persistence.FileTxnSnapLog.<init>(FileTxnSnapLog.java:136) ~[org.apache.zookeeper-zookeeper-3.6.3.jar:3.6.3]
at org.apache.zookeeper.server.ZooKeeperServerMain.runFromConfig(ZooKeeperServerMain.java:137) ~[org.apache.zookeeper-zookeeper-3.6.3.jar:3.6.3]
at org.apache.zookeeper.server.ZooKeeperServerMain.initializeAndRun(ZooKeeperServerMain.java:112) ~[org.apache.zookeeper-zookeeper-3.6.3.jar:3.6.3]
at org.apache.zookeeper.server.ZooKeeperServerMain.main(ZooKeeperServerMain.java:67) [org.apache.zookeeper-zookeeper-3.6.3.jar:3.6.3]
at org.apache.zookeeper.server.quorum.QuorumPeerMain.initializeAndRun(QuorumPeerMain.java:140) [org.apache.zookeeper-zookeeper-3.6.3.jar:3.6.3]
at org.apache.zookeeper.server.quorum.QuorumPeerMain.main(QuorumPeerMain.java:90) [org.apache.zookeeper-zookeeper-3.6.3.jar:3.6.3]
Unable to access datadir, exiting abnormally
23:36:15.223 [main] INFO org.apache.zookeeper.audit.ZKAuditProvider - ZooKeeper audit is disabled.
23:36:15.226 [main] ERROR org.apache.zookeeper.util.ServiceUtils - Exiting JVM with code 3
23:36:15.196 [PurgeTask] ERROR org.apache.zookeeper.server.DatadirCleanupManager - Error occurred while purging.
org.apache.zookeeper.server.persistence.FileTxnSnapLog$DatadirException: Unable to create data directory data/zookeeper/version-2
at org.apache.zookeeper.server.persistence.FileTxnSnapLog.<init>(FileTxnSnapLog.java:136) ~[org.apache.zookeeper-zookeeper-3.6.3.jar:3.6.3]
at org.apache.zookeeper.server.PurgeTxnLog.purge(PurgeTxnLog.java:80) ~[org.apache.zookeeper-zookeeper-3.6.3.jar:3.6.3]
at org.apache.zookeeper.server.DatadirCleanupManager$PurgeTask.run(DatadirCleanupManager.java:141) [org.apache.zookeeper-zookeeper-3.6.3.jar:3.6.3]
at java.util.TimerThread.mainLoop(Timer.java:556) [?:?]
at java.util.TimerThread.run(Timer.java:506) [?:?]
23:36:15.229 [PurgeTask] INFO org.apache.zookeeper.server.DatadirCleanupManager - Purge task completed
I have made sure that SELinux is disabled and tried changing permission using chmod 777 data/ and every other step available to resolve this but still unable to find any. Please help me with the possible resolution.
I am following the Eclipse Hono getting started guide and using the sandbox environment.
I opened git bash terminal and used this command for starting the device to receive commands:
mosquitto_sub -v -h $MQTT_ADAPTER_IP -u $MY_DEVICE#$MY_TENANT -P $MY_PWD -t command/+/+/req/#
I opened another git bash terminal and used this command for the application client to send commands to the device:
java -jar hono-cli-*-exec.jar --hono.client.host=$AMQP_NETWORK_IP --hono.client.port=15672 --hono.client.username=consumer#HONO --hono.client.password=verysecret --tenant.id=$MY_TENANT --device.id=$MY_DEVICE --spring.profiles.active=command
But I get this exception when I use the above command:
21:41:45.504 [main] INFO org.eclipse.hono.cli.Application - Starting Application v1.3.0 on DESKTOP-4SV0QNN with PID 9768 (C:\Users\HP\hono-cli-1.3.0-exec.jar started by HP in C:\Users\HP)
21:41:45.509 [main] INFO org.eclipse.hono.cli.Application - The following profiles are active: command
21:41:47.092 [main] INFO org.eclipse.hono.cli.Application - running command line client in role(s): command
21:41:50.249 [main] INFO org.eclipse.hono.cli.Application - Started Application in 7.064 seconds (JVM running for 10.127)
21:42:17.462 [vert.x-eventloop-thread-0] INFO o.e.h.client.impl.HonoConnectionImpl - max number of attempts [5] to re-connect to server [hono.eclipseprojects.io:15672, role: unknown] have been made, giving up
21:42:17.595 [vert.x-eventloop-thread-0] INFO o.e.h.client.impl.HonoConnectionImpl - stopping connection attempt to server [hono.eclipseprojects.io:15672, role: unknown] due to terminal error
org.eclipse.hono.connection.ConnectTimeoutException: connection attempt timed out after 5000ms
at org.eclipse.hono.connection.impl.ConnectionFactoryImpl.lambda$connect$0(ConnectionFactoryImpl.java:153)
at io.vertx.core.impl.VertxImpl$InternalTimerHandler.handle(VertxImpl.java:923)
at io.vertx.core.impl.VertxImpl$InternalTimerHandler.handle(VertxImpl.java:887)
at io.vertx.core.impl.ContextImpl.executeTask(ContextImpl.java:366)
at io.vertx.core.impl.EventLoopContext.execute(EventLoopContext.java:43)
at io.vertx.core.impl.ContextImpl.executeFromIO(ContextImpl.java:229)
at io.vertx.core.impl.ContextImpl.executeFromIO(ContextImpl.java:221)
at io.vertx.core.impl.VertxImpl$InternalTimerHandler.run(VertxImpl.java:913)
at io.netty.util.concurrent.PromiseTask.runTask(PromiseTask.java:98)
at io.netty.util.concurrent.ScheduledFutureTask.run(ScheduledFutureTask.java:170)
at io.netty.util.concurrent.AbstractEventExecutor.safeExecute(AbstractEventExecutor.java:164)
at io.netty.util.concurrent.SingleThreadEventExecutor.runAllTasks(SingleThreadEventExecutor.java:472)
at io.netty.channel.nio.NioEventLoop.run(NioEventLoop.java:500)
at io.netty.util.concurrent.SingleThreadEventExecutor$4.run(SingleThreadEventExecutor.java:989)
at io.netty.util.internal.ThreadExecutorMap$2.run(ThreadExecutorMap.java:74)
at io.netty.util.concurrent.FastThreadLocalRunnable.run(FastThreadLocalRunnable.java:30)
at java.base/java.lang.Thread.run(Thread.java:834)
21:42:17.602 [vert.x-eventloop-thread-0] ERROR org.eclipse.hono.cli.app.Commander - Error: failed to connect
I have set the environment variables MQTT_ADAPTER_IP, MY_TENANT, MY_DEVICE in the application client terminal and MY_TENANT, MY_DEVICE, MY_PWD, MQTT_ADAPTER_IP in the device terminal.
This is the jdk version in my system:
C:\Users\HP>java -version
java version "11.0.7" 2020-04-14 LTS
Java(TM) SE Runtime Environment 18.9 (build 11.0.7+8-LTS)
Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.7+8-LTS, mixed mode)
Please let know how can I fix this.
I am fairly new to Linux (and brand new to chef) and I have ran into an issue when setting up my chef server. I am trying to create an admin user with the command
sudo chef-server-ctl user-create admin Admin Ladmin admin#example.com
examplepass -f admin.pem
but after I keep getting this error:
ERROR: Connection refused connecting...
ERROR: Connection refused connecting to https://127.0.0.1/users/, retry 5/5
ERROR: Network Error: Connection refused - Connection refused
connecting to https://..., giving up
Check your knife configuration and network settings
I also noticed that when I ran chef-server-ctl I got this output:
[2016-12-21T13:24:59-05:00] ERROR: Running exception handlers Running
handlers complete
[2016-12-21T13:24:59-05:00] ERROR: Exception
handlers complete Chef Client failed. 0 resources updated in 01 seconds
[2016-12-21T13:24:59-05:00] FATAL: Stacktrace dumped to
/var/opt/opscode/local-mode-cache/chef-stacktrace.out
[2016-12-21T13:24:59-05:00] FATAL: Please provide the contents of the
stacktrace.out file if you file a bug report
[2016-12-21T13:24:59-05:00] FATAL:
Chef::Exceptions::CannotDetermineNodeName: Unable to determine node
name: configure node_name or configure the system's hostname and fqdn
I read that this error is due to a prerequisite mistake but I'm uncertain as to what it means or how to fix it. So any input would be greatly appreciated.
Your server does not have a valid FQDN (aka full host name). You'll have to fix this before installing Chef server.
I am running Linux in VirtualBox and am having an issue that I did not encounter on my machine with Linux as the primary OS.
When launching the neo4j service through sudo ./neo4j start in /opt/neo4j-community-2.3.1/bin I get a timeout with the message Failed to start within 120 seconds. Neo4j Server may have failed to start, please check the logs
my log from /opt/neo4j-community-2.3.1/data/graph.db/messages.log says:
http://pastebin.com/wUA715QQ
and data/log/console.log says:
2016-01-06 02:07:03.404+0100 INFO Successfully started database
2016-01-06 02:07:03.603+0100 INFO Successfully stopped database
2016-01-06 02:07:03.604+0100 INFO Successfully shutdown Neo4j Server
2016-01-06 02:07:03.608+0100 ERROR Failed to start Neo4j: Starting Neo4j failed: Component 'org.neo4j.server.security.auth.FileUserRepository#9ab182' was successfully initialized, but failed to start. Please see attached cause exception. Starting Neo4j failed: Component 'org.neo4j.server.security.auth.FileUserRepository#9ab182' was successfully initialized, but failed to start. Please see attached cause exception.
org.neo4j.server.ServerStartupException: Starting Neo4j failed: Component 'org.neo4j.server.security.auth.FileUserRepository#9ab182' was successfully initialized, but failed to start. Please see attached cause exception.
at org.neo4j.server.exception.ServerStartupErrors.translateToServerStartupError(ServerStartupErrors.java:67)
at org.neo4j.server.AbstractNeoServer.start(AbstractNeoServer.java:234)
at org.neo4j.server.Bootstrapper.start(Bootstrapper.java:97)
at org.neo4j.server.CommunityBootstrapper.start(CommunityBootstrapper.java:48)
at org.neo4j.server.CommunityBootstrapper.main(CommunityBootstrapper.java:35)
Caused by: org.neo4j.kernel.lifecycle.LifecycleException: Component 'org.neo4j.server.security.auth.FileUserRepository#9ab182' was successfully initialized, but failed to start. Please see attached cause exception.
at org.neo4j.kernel.lifecycle.LifeSupport$LifecycleInstance.start(LifeSupport.java:462)
at org.neo4j.kernel.lifecycle.LifeSupport.start(LifeSupport.java:111)
at org.neo4j.server.AbstractNeoServer.start(AbstractNeoServer.java:194)
... 3 more
Caused by: java.nio.file.AccessDeniedException: /opt/neo4j-community-2.3.1/data/dbms/auth
at sun.nio.fs.UnixException.translateToIOException(UnixException.java:84)
at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:102)
at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:107)
at sun.nio.fs.UnixFileSystemProvider.newByteChannel(UnixFileSystemProvider.java:214)
at java.nio.file.Files.newByteChannel(Files.java:361)
at java.nio.file.Files.newByteChannel(Files.java:407)
at java.nio.file.Files.readAllBytes(Files.java:3152)
at org.neo4j.server.security.auth.FileUserRepository.loadUsersFromFile(FileUserRepository.java:208)
at org.neo4j.server.security.auth.FileUserRepository.start(FileUserRepository.java:73)
at org.neo4j.kernel.lifecycle.LifeSupport$LifecycleInstance.start(LifeSupport.java:452)
... 5 more
Any idea why the server won't start?
Check the permissions on /opt/neo4j-community-2.3.1/data/dbms/auth
See the line that says:
Caused by: java.nio.file.AccessDeniedException: /opt/neo4j-community-2.3.1/data/dbms/auth
I have a small Rexster/Titan cluster using Cassandra. A Rexster extension is used to query the graph. I did some benchmarking and did start and stop Rexster/Titan many times. But now I run into a strange issue: Rexster refuses to start but does not display any error message.
I tried to figure out what is causing this and reduced the cluster to a single node 192.168.0.4.
If I remove my extension Rexster manages to start up.
# console output
Forking Cassandra...
Running `nodetool statusthrift`..... OK
(returned exit status 0 and printed string "running").
Forking Titan + Rexster...
Connecting to Titan + Rexster (127.0.0.1:8184)...... OK
(connected to 127.0.0.1:8184).
Run rexster-console.sh to connect.
but when I place my extension uber JAR in the ext folder Rexster refuses to start.
# console output
Forking Cassandra...
Running `nodetool statusthrift`..... OK
(returned exit status 0 and printed string "running").
Forking Titan + Rexster...
Connecting to Titan + Rexster (127.0.0.1:8184)............................
timeout exceeded (60 seconds): could not connect to 127.0.0.1:8184
See /var/lib/titan/bin/../log/rexstitan.log for Rexster log output.
If I now check rexstitan.log, as suggested by the console output, I can not find any error message.
# rexstitan.log
0 [main] INFO com.tinkerpop.rexster.Application - .:Welcome to Rexster:.
73 [main] INFO com.tinkerpop.rexster.server.RexsterProperties -
Using [/var/lib/titan/rexhome/../conf/rexster-cassandra-cluster.xml]
as configuration source.
78 [main] INFO com.tinkerpop.rexster.Application - Rexster is watching
[/var/lib/titan/rexhome/../conf/rexster-cassandra-cluster.xml] for change.
244 [main] INFO com.netflix.astyanax.connectionpool.impl.ConnectionPoolMBeanManager -
Registering mbean: com.netflix.MonitoredResources:type=ASTYANAX,
name=ClusterTitanConnectionPool,ServiceType=connectionpool
252 [main] INFO com.netflix.astyanax.connectionpool.impl.CountingConnectionPoolMonitor -
AddHost: 192.168.0.4
537 [main] INFO com.netflix.astyanax.connectionpool.impl.ConnectionPoolMBeanManager -
Registering mbean: com.netflix.MonitoredResources:type=ASTYANAX,
name=KeyspaceTitanConnectionPool,ServiceType=connectionpool
538 [main] INFO com.netflix.astyanax.connectionpool.impl.CountingConnectionPoolMonitor -
AddHost: 192.168.0.4
1951 [main] INFO com.thinkaurelius.titan.graphdb.configuration.GraphDatabaseConfiguration -
Set cluster.partition=false from store features
1971 [main] INFO com.thinkaurelius.titan.graphdb.configuration.GraphDatabaseConfiguration -
Set default timestamp provider MICRO
2019 [main] INFO com.thinkaurelius.titan.graphdb.configuration.GraphDatabaseConfiguration -
Generated unique-instance-id=7f0000012902-node1
2045 [main] INFO com.netflix.astyanax.connectionpool.impl.ConnectionPoolMBeanManager -
Registering mbean: com.netflix.MonitoredResources:type=ASTYANAX,
name=ClusterTitanConnectionPool,ServiceType=connectionpool
2046 [main] INFO com.netflix.astyanax.connectionpool.impl.CountingConnectionPoolMonitor -
AddHost: 192.168.0.4
2053 [main] INFO com.netflix.astyanax.connectionpool.impl.ConnectionPoolMBeanManager -
Registering mbean: com.netflix.MonitoredResources:type=ASTYANAX,
name=KeyspaceTitanConnectionPool,ServiceType=connectionpool
2054 [main] INFO com.netflix.astyanax.connectionpool.impl.CountingConnectionPoolMonitor -
AddHost: 192.168.0.4
2228 [main] INFO com.thinkaurelius.titan.diskstorage.Backend -
Initiated backend operations thread pool of size 4
6619 [main] INFO com.thinkaurelius.titan.diskstorage.log.kcvs.KCVSLog -
Loaded unidentified ReadMarker start time Timepoint[1423479705116000 μs]
into com.thinkaurelius.titan.diskstorage.log.kcvs.KCVSLog$MessagePuller#212f3ff1
6625 [main] INFO com.tinkerpop.rexster.RexsterApplicationGraph -
Graph [graph] - configured with allowable namespace [*:*]
The only entry that looks strange to me is the one concerning the log:
6619 [main] INFO com.thinkaurelius.titan.diskstorage.log.kcvs.KCVSLog -
Loaded unidentified ReadMarker start time Timepoint[1423479705116000 μs]
into com.thinkaurelius.titan.diskstorage.log.kcvs.KCVSLog$MessagePuller#212f3ff1
My exception uses the logger for debugging. You can see the instantiation an usage on github: https://github.com/sebschlicht/titan-graphity-kribble/blob/master/src/main/java/de/uniko/sebschlicht/titan/extensions/GraphityExtension.java#L22
Though Rexster failed to start there is a process with the PID displayed in the console but curl fails to connect to Rexster:
$ curl 192.168.0.4:8182
curl: (7) Failed to connect to 192.168.0.4 port 8182: Connection refused
Why doesn't Rexster throw an exception? How can I debug this situation?
edit:
I removed any log messages in my code. I removed all exceptions that may be thrown during startup. Still Rexster refuses to start with my extension and the only hint in the log files is the unidentified read marker. I have to clue what prevents Rexster from starting.
The log message is nothing to worry about.
After rebuilding the application in another project step-by-step Rexster is now able to start with the extension. During this rebuild I noticed two situations, that can cause the behaviour described:
Missing dependency
If your project depends on a second project you might use Maven to inject it as a dependency. However, if you use
mvn clean package
to build the extension's JAR file it does not contain this dependency by default. You need to use a Maven plugin (e.g. maven-shade-plugin) to create a shaded JAR that contains all the dependencies your extension needs. Set the dependency scope to provided for all Titan/Rexster/Blueprints related dependencies. Use the shaded uber-JAR to deploy the extension to Rexster.
However, this was not new to me and should not have caused the problem in my case. There might be more situations that cause this problem or maybe there was a problem with Maven that messed up the shaded JAR. Feel free to browse the commit on github to catch this voodoo.
Missing extension
Another cause of this behaviour is a missing extension.
If you specify an extension in the com.tinkerpop.rexster.extension.RexsterExtension resource file, that is not present on startup, Rexster does neither log nor throw an exception, but refuses to start.