I'm looking for gcc and clang compiler options that effectively tell the compiler to emit constant-time object code. Ideally there'd be a compiler option equivalent to -Os that instead of optimizing for size, optimizes for constant-timeness of the emitted code. Current compilers to my knowledge do not provide such an option, so what I'm asking for really is a set of compiler options that would have a similar effect.
I am trying to build a Fortran program, but I get errors about an undefined reference or an unresolved external symbol. I've seen another question about these errors, but the answers there are mostly specific to C++.
What are common causes of these errors when writing in Fortran, and how do I fix/prevent them?
This is a canonical question for a whole class of errors when building Fortran programs. If you've been referred here or had your question closed as a duplicate of this one, you may need to read one or more of several answers. Start with this answer which acts as a table of contents for solutions provided.
A link-time error like these messages can be for many of the same reasons as for more general uses of the linker, rather than just having compiled a Fortran program. Some of these are covered in the linked question about C++ linking and in another answer here: failing to specify the library, or providing them in the wrong order.
However, there are common mistakes in writing a Fortran program that can lead to link errors.
Unsupported intrinsics
If a subroutine reference is intended to refer to an intrinsic subroutine then this can lead to a link-time error if that subroutine intrinsic isn't offered by the compiler: it is taken to be an external subroutine.
implicit none
call unsupported_intrinsic
end
With unsupported_intrinsic not provided by the compiler we may see a linking error message like
undefined reference to `unsupported_intrinsic_'
If we are using a non-standard, or not commonly implemented, intrinsic we can help our compiler report this in a couple of ways:
implicit none
intrinsic :: my_intrinsic
call my_intrinsic
end program
If my_intrinsic isn't a supported intrinsic, then the compiler will complain with a helpful message:
Error: ‘my_intrinsic’ declared INTRINSIC at (1) does not exist
We don't have this problem with intrinsic functions because we are using implicit none:
implicit none
print *, my_intrinsic()
end
Error: Function ‘my_intrinsic’ at (1) has no IMPLICIT type
With some compilers we can use the Fortran 2018 implicit statement to do the same for subroutines
implicit none (external)
call my_intrinsic
end
Error: Procedure ‘my_intrinsic’ called at (1) is not explicitly declared
Note that it may be necessary to specify a compiler option when compiling to request the compiler support non-standard intrinsics (such as gfortran's -fdec-math). Equally, if you are requesting conformance to a particular language revision but using an intrinsic introduced in a later revision it may be necessary to change the conformance request. For example, compiling
intrinsic move_alloc
end
with gfortran and -std=f95:
intrinsic move_alloc
1
Error: The intrinsic ‘move_alloc’ declared INTRINSIC at (1) is not available in the current standard settings but new in Fortran 2003. Use an appropriate ‘-std=*’ option or enable ‘-fall-intrinsics’ in order to use it.
External procedure instead of module procedure
Just as we can try to use a module procedure in a program, but forget to give the object defining it to the linker, we can accidentally tell the compiler to use an external procedure (with a different link symbol name) instead of the module procedure:
module mod
implicit none
contains
integer function sub()
sub = 1
end function
end module
use mod, only :
implicit none
integer :: sub
print *, sub()
end
Or we could forget to use the module at all. Equally, we often see this when mistakenly referring to external procedures instead of sibling module procedures.
Using implicit none (external) can help us when we forget to use a module but this won't capture the case here where we explicitly declare the function to be an external one. We have to be careful, but if we see a link error like
undefined reference to `sub_'
then we should think we've referred to an external procedure sub instead of a module procedure: there's the absence of any name mangling for "module namespaces". That's a strong hint where we should be looking.
Mis-specified binding label
If we are interoperating with C then we can specify the link names of symbols incorrectly quite easily. It's so easy when not using the standard interoperability facility that I won't bother pointing this out. If you see link errors relating to what should be C functions, check carefully.
If using the standard facility there are still ways to trip up. Case sensitivity is one way: link symbol names are case sensitive, but your Fortran compiler has to be told the case if it's not all lower:
interface
function F() bind(c)
use, intrinsic :: iso_c_binding, only : c_int
integer(c_int) :: f
end function f
end interface
print *, F()
end
tells the Fortran compiler to ask the linker about a symbol f, even though we've called it F here. If the symbol really is called F, we need to say that explicitly:
interface
function F() bind(c, name='F')
use, intrinsic :: iso_c_binding, only : c_int
integer(c_int) :: f
end function f
end interface
print *, F()
end
If you see link errors which differ by case, check your binding labels.
The same holds for data objects with binding labels, and also make sure that any data object with linkage association has matching name in any C definition and link object.
Equally, forgetting to specify C interoperability with bind(c) means the linker may look for a mangled name with a trailing underscore or two (depending on compiler and its options). If you're trying to link against a C function cfunc but the linker complains about cfunc_, check you've said bind(c).
Not providing a main program
A compiler will often assume, unless told otherwise, that it's compiling a main program in order to generate (with the linker) an executable. If we aren't compiling a main program that's not what we want. That is, if we're compiling a module or external subprogram, for later use:
module mod
implicit none
contains
integer function f()
f = 1
end function f
end module
subroutine s()
end subroutine s
we may get a message like
undefined reference to `main'
This means that we need to tell the compiler that we aren't providing a Fortran main program. This will often be with the -c flag, but there will be a different option if trying to build a library object. The compiler documentation will give the appropriate options in this case.
There are many possible ways you can see an error like this. You may see it when trying to build your program (link error) or when running it (load error). Unfortunately, there's rarely a simple way to see which cause of your error you have.
This answer provides a summary of and links to the other answers to help you navigate. You may need to read all answers to solve your problem.
The most common cause of getting a link error like this is that you haven't correctly specified external dependencies or do not put all parts of your code together correctly.
When trying to run your program you may have a missing or incompatible runtime library.
If building fails and you have specified external dependencies, you may have a programming error which means that the compiler is looking for the wrong thing.
Not linking the library (properly)
The most common reason for the undefined reference/unresolved external symbol error is the failure to link the library that provides the symbol (most often a function or subroutine).
For example, when a subroutine from the BLAS library, like DGEMM is used, the library that provides this subroutine must be used in the linking step.
In the most simple use cases, the linking is combined with compilation:
gfortran my_source.f90 -lblas
The -lblas tells the linker (here invoked by the compiler) to link the libblas library. It can be a dynamic library (.so, .dll) or a static library (.a, .lib).
In many cases, it will be necessary to provide the library object defining the subroutine after the object requesting it. So, the linking above may succeed where switching the command line options (gfortran -lblas my_source.f90) may fail.
Note that the name of the library can be different as there are multiple implementations of BLAS (MKL, OpenBLAS, GotoBLAS,...).
But it will always be shortened from lib... to l... as in liopenblas.so and -lopenblas.
If the library is in a location where the linker does not see it, you can use the -L flag to explicitly add the directory for the linker to consider, e.g.:
gfortran -L/usr/local/lib -lopenblas
You can also try to add the path into some environment variable the linker searches, such as LIBRARY_PATH, e.g.:
export LIBRARY_PATH=$LIBRARY_PATH:/usr/local/lib
When linking and compilation are separated, the library is linked in the linking step:
gfortran -c my_source.f90 -o my_source.o
gfortran my_source.o -lblas
Not providing the module object file when linking
We have a module in a separate file module.f90 and the main program program.f90.
If we do
gfortran -c module.f90
gfortran program.f90 -o program
we receive an undefined reference error for the procedures contained in the module.
If we want to keep separate compilation steps, we need to link the compiled module object file
gfortran -c module.f90
gfortran module.o program.f90 -o program
or, when separating the linking step completely
gfortran -c module.f90
gfortran -c program.f90
gfortran module.o program.o -o program
Problems with the compiler's own libraries
Most Fortran compilers need to link your code against their own libraries. This should happen automatically without you needing to intervene, but this can fail for a number of reasons.
If you are compiling with gfortran, this problem will manifest as undefined references to symbols in libgfortran, which are all named _gfortran_.... These error messages will look like
undefined reference to '_gfortran_...'
The solution to this problem depends on its cause:
The compiler library is not installed
The compiler library should have been installed automatically when you installed the compiler. If the compiler did not install correctly, this may not have happened.
This can be solved by correctly installing the library, by correctly installing the compiler. It may be worth uninstalling the incorrectly installed compiler to avoid conflicts.
N.B. proceed with caution when uninstalling a compiler: if you uninstall the system compiler it may uninstall other necessary programs, and may render other programs unusable.
The compiler cannot find the compiler library
If the compiler library is installed in a non-standard location, the compiler may be unable to find it. You can tell the compiler where the library is using LD_LIBRARY_PATH, e.g. as
export LD_LIBRARY_PATH="/path/to/library:$LD_LIBRARY_PATH"
If you can't find the compiler library yourself, you may need to install a new copy.
The compiler and the compiler library are incompatible
If you have multiple versions of the compiler installed, you probably also have multiple versions of the compiler library installed. These may not be compatible, and the compiler might find the wrong library version.
This can be solved by pointing the compiler to the correct library version, e.g. by using LD_LIBRARY_PATH as above.
The Fortran compiler is not used for linking
If you are linking invoking the linker directly, or indirectly through a C (or other) compiler, then you may need to tell this compiler/linker to include the Fortran compiler's runtime library. For example, if using GCC's C frontend:
gcc -o program fortran_object.o c_object.o -lgfortran
Working with Haskell and particularly GHC I can see tinfo6 word quite often. Mostly it appears in arch-vendor-os triple x86_64-linux-tinfo6 like if it was some sort of OS. But what really does tinfo6 mean?
it appears in arch-vendor-os triple x86_64-linux-tinfo6
I think you are confusing GNU target triplets with GHC target triplets. A GHC target triplet is <architecture>-<operating system>-<ABI>.
So, tinfo6 is the ABI. I don't know much about GHC, but I do remember that it has a calling convention that is not the C calling convention.
Fun fact: this calling convention can actually not be expressed in C, therefore the C backend of GHC actually calls GCC to generate assembly, then a Perl(!!!) script that is part of the GHC compiler searches for calls in the assembly code and re-writes them to the GHC calling convention; after that, the compiler will call GCC (or rather GAS) again, to assemble the object file. (This rather clever but somewhat crazy hack is one of the reasons for the push to native and LLVM backends.)
So, unfortunately, I don't know what tinfo6 means but I am pretty sure it is the name of the GHC calling convention or ABI.
How can I retrieve the type of architecture (linux versus Windows) in my fortran code? Is there some sort of intrinsic function or subroutine that gives this information? Then I would like to use a switch like this every time I have a system call:
if (trim(adjustl(Arch))=='Linux') then
resul = system('ls > output.txt')
elseif (trim(adjustl(Arch))=='Windows')
resul = system('dir > output.txt')
else
write(*,*) 'architecture not supported'
stop
endif
thanks
A.
The Fortran 2003 standard introduced the GET_ENVIRONMENT_VARIABLE intrinsic subroutine. A simple form of call would be
call GET_ENVIRONMENT_VARIABLE (NAME, VALUE)
which will return the value of the variable called NAME in VALUE. The routine has other optional arguments, your favourite reference documentation will explain all. This rather assumes that you can find an environment variable to tell you what the executing platform is.
If your compiler doesn't yet implement this standard approach it is extremely likely to have a non-standard approach; a routine called getenv used to be available on more than one of the Fortran compilers I've used in the recent past.
The 2008 standard introduced a standard function COMPILER_OPTIONS which will return a string containing the compilation options used for the program, if, that is, the compiler supports this sort of thing. This seems to be less widely implemented yet than GET_ENVIRONMENT_VARIABLE, as ever consult your compiler documentation set for details and availability. If it is available it may also be useful to you.
You may also be interested in the 2008-introduced subroutine EXECUTE_COMMAND_LINE which is the standard replacement for the widely-implemented but non-standard system routine that you use in your snippet. This is already available in a number of current Fortran compilers.
There is no intrinsic function in Fortran for this. A common workaround is to use conditional compilation (through makefile or compiler supported macros) such as here. If you really insist on this kind of solution, you might consider making an external function, e.g., in C. However, since your code is built for a fixed platform (Windows/Linux, not both), the first solution is preferable.
My C source code has many unintialized variables. The code is on RHEL 6.4 operating system.
Is there a way to find all the uninitialized variables?
Finding all of them is impossible, in the mathematical sense (at least without false-positives). However, there are some tools to help find some of them:
Turn on compiler warnings. With gcc, this would be -Wuninitialized, -Winit-self, and -Wmaybe-uninitialized. Note that you will need to try this with various levels of optimization; you'll get different warnings at different -O levels. Note that -Wmaybe-uninitialized (as the name suggests) may give false positives.
For uninitialized memory (as in malloc, etc.), you can use valgrind. This actually requires running the program.
Static checkers such as splint. (Thanks to Andy Lester for this suggestion.)
Assuming you're using GCC, compile your program with -Wuninitialized. Better to just always compile with -Wall, because with C a programmer needs all the help he can get.