I am installing asterisk 13.
OS: Linux 3.10.0-229.el7.x86_64
Asterisk version : asterisk-certified-13.21
While running configure command I am having following error:
...
checking for LIBEDIT... no
checking for history_init in -ledit... no
checking for tgetent in -ltermcap... yes
checking for uuid_generate_random in -luuid... no
checking for uuid_generate_random in -le2fs-uuid... no
checking for uuid_generate_random... no
configure: error: *** uuid support not found (this typically means the uuid development package is missing)
...
Error indicates that uuid development package is missing
but i have installed uuid.devel package
Kindly find the out put of the command as follows
command :rpm -qa | grep uuid
output:
uuid-1.6.2-26.el7.x86_64
uuid-devel-1.6.2-26.el7.i686
libuuid-2.23.2-21.el7.x86_64
uuid-1.6.2-26.el7.i686
Hence i believe i have the required package but still i am having this error any ideas for the same.
The question is already answered, but if you came here and you are trying to install Asterisk on Ubuntu, try:
sudo apt install uuid-dev
You also need the libuuid-devel package installed!
Related
Github page for the OS is here: https://github.com/rellermeyer/course_os
From the wiki in the Github page, it indicates me to install glib and texinfo. It also indicates me how to build the toolchain.
On my first attempt at building, it told me I needed wget and I installed using HomeBrew. When issuing the command $ brew list, I get:
$ brew list
cloog018 glib make postgresql wget
coreutils gmp4 mpfr2 python
gcc48 isl011 openssl readline
gdbm libffi ossp-uuid sqlite
gettext libmpc08 pkg-config texinfo
Which shows me I have everything I need. However, on the second attempt it gives me an error:
configure: WARNING: you should use --build, --host, --target
configure: WARNING: invalid host type: Systems/course_os/toolchain/arm-none-eabi
checking build system type... Invalid configuration `Systems/course_os/toolchain/arm-none-eabi': machine `Systems/course_os/toolchain/arm-none' not recognized
configure: error: /bin/sh ../../src/gcc-4.8.1/config.sub Systems/course_os/toolchain/arm-none-eabi failed
I don't understand the warning and what it is it's missing. Additionally, when I try to do the same steps with Ubuntu, it runs perfectly and I'm able to go on to building the kernel and run Hello World. What does Ubuntu have that OSX doesn't that makes the OS run? Could it be an issue with gcc?
Note: I'm running OSX Yosemite 10.10 and Ubuntu 14.04.
I found an answer to my problem. There was an issue with one of my target folders being two words. I changed it from Operating System to OS and it ran perfectly. Thanks!
I had the inspiration to start messing around with Erlang and I am having problems installing it... I am using Linux Mint 16 (petra). I installed the dependencies, and then downloaded otp_src_17.1.tar.gz and ran 'tar -zxf otp_src_17.1.tar.gz' I then ran ./configure which gave me some errors that made it impossible to run make.
These are the errors I'm getting (actually what I did was I did ./configure > configure.txt to get all the lines it prints as it configures, and it conveniently still printed to the console everything that has errors - neat)
configure: WARNING: No odbc library found skipping odbc
configure: WARNING: "ODBC library - header check failed"
configure: WARNING: "ODBC library - link check failed"
rm: remove write-protected regular file './CONF_INFO'?
configure: WARNING: No GLU headers found, wx will NOT be usable
/home/core/Desktop/otp_src_17.1/lib/wx/./configure: line 5195: wx-config: command not found
/home/core/Desktop/otp_src_17.1/lib/wx/./configure: line 5893: ./CONF_INFO: Permission denied
configure: WARNING:
wxWidgets must be installed on your system.
Please check that wx-config is in path, the directory
where wxWidgets libraries are installed (returned by
'wx-config --libs' or 'wx-config --static --libs' command)
is in LD_LIBRARY_PATH or equivalent variable and
wxWidgets version is 2.8.4 or above.
rm: remove write-protected regular file 'doc/CONF_INFO'?
/home/core/Desktop/otp_src_17.1/erts/configure: line 6466: doc/CONF_INFO: Permission denied
configure: WARNING: No 'xsltproc' command found: the documentation cannot be built
/home/core/Desktop/otp_src_17.1/erts/configure: line 6513: doc/CONF_INFO: Permission denied
configure: WARNING: No 'fop' command found: going to generate placeholder PDF files
configure: error: No curses library functions found
configure: error: /bin/bash '/home/core/Desktop/otp_src_17.1/erts/configure' failed for erts
The thing is - I know that I have the ncurses library, as evidenced by the fact that when I do "sudo apt-get install ncurses-base ncurses-bin" it says:
Reading package lists... Done
Building dependency tree
Reading state information... Done
ncurses-base is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
When I run "locate ncurses" it gives me the following:
/lib/i386-linux-gnu/libncurses.so.5
/lib/i386-linux-gnu/libncurses.so.5.9
/lib/x86_64-linux-gnu/libncurses.so.5
/lib/x86_64-linux-gnu/libncurses.so.5.9
/lib/x86_64-linux-gnu/libncursesw.so.5
/lib/x86_64-linux-gnu/libncursesw.so.5.9
/usr/bin/ncurses5-config
/usr/bin/ncursesw5-config
/usr/lib/vlc/plugins/gui/libncurses_plugin.so
/usr/share/doc/libncurses5
/usr/share/doc/libncursesw5
/usr/share/doc/ncurses-base
/usr/share/doc/ncurses-bin
/usr/share/doc/ncurses-base/changelog.Debian.gz
/usr/share/doc/ncurses-base/copyright
/usr/share/doc/ncurses-bin/FAQ
/usr/share/doc/ncurses-bin/changelog.Debian.gz
/usr/share/doc/ncurses-bin/copyright
/usr/share/lintian/overrides/ncurses-base
/usr/share/man/man1/ncurses5-config.1.gz
/usr/share/man/man1/ncursesw5-config.1.gz
/var/cache/apt/archives/libncurses5_5.9+20130608-1ubuntu1_i386.deb
/var/lib/dpkg/info/libncurses5:amd64.list
/var/lib/dpkg/info/libncurses5:amd64.md5sums
/var/lib/dpkg/info/libncurses5:amd64.postinst
/var/lib/dpkg/info/libncurses5:amd64.postrm
/var/lib/dpkg/info/libncurses5:amd64.shlibs
/var/lib/dpkg/info/libncurses5:amd64.symbols
/var/lib/dpkg/info/libncurses5:i386.list
/var/lib/dpkg/info/libncurses5:i386.md5sums
/var/lib/dpkg/info/libncurses5:i386.postinst
/var/lib/dpkg/info/libncurses5:i386.postrm
/var/lib/dpkg/info/libncurses5:i386.shlibs
/var/lib/dpkg/info/libncurses5:i386.symbols
/var/lib/dpkg/info/libncursesw5:amd64.list
/var/lib/dpkg/info/libncursesw5:amd64.md5sums
/var/lib/dpkg/info/libncursesw5:amd64.postinst
/var/lib/dpkg/info/libncursesw5:amd64.postrm
/var/lib/dpkg/info/libncursesw5:amd64.shlibs
/var/lib/dpkg/info/libncursesw5:amd64.symbols
/var/lib/dpkg/info/ncurses-base.conffiles
/var/lib/dpkg/info/ncurses-base.list
/var/lib/dpkg/info/ncurses-base.md5sums
/var/lib/dpkg/info/ncurses-bin.list
/var/lib/dpkg/info/ncurses-bin.md5sums
I am at a loss as to where to proceed. Thanks for any help
I believe you need to install ncurses-dev
'sudo yum install ncurses-devel.x86_64' prior to running ./configure worked just fine for me. Fedora 21 x64, btw.
After I extracted the tar, the documentation was in '/opt_src_{version}/HOWTO/INSTALL.md. The contents of which states:
Required Utilities
These are the tools you need in order to unpack and build Erlang/OTP.
WARNING: Please have a look at the [Known platform issues][] chapter
before you start.
Unpacking
GNU unzip, or a modern uncompress.
A TAR program that understands the GNU TAR format for long filenames.
Building
GNU make
Compiler -- GNU C Compiler, gcc or the C compiler frontend for LLVM, clang.
Perl 5
GNU m4 -- If HiPE (native code) support is enabled. HiPE can be
disabled using --disable-hipe
ncurses, termcap, or termlib -- The development headers and
libraries are needed, often known as ncurses-devel. Use
--without-termcap to build without any of these libraries. Note that
in this case only the old shell (without any line editing) can be used.
sed -- Stream Editor for basic text transformation.
ncurses just happened to be the only required package I didn't have installed on this development VM. So your mileage may vary.
This was the output of 'locate ncurses' after I installed the ncurses lib:
/usr/lib64/libncurses++.so.5
/usr/lib64/libncurses++.so.5.9
/usr/lib64/libncurses++w.so.5
/usr/lib64/libncurses++w.so.5.9
/usr/lib64/libncurses.so.5
/usr/lib64/libncurses.so.5.9
/usr/lib64/libncursesw.so.5
/usr/lib64/libncursesw.so.5.9
/usr/share/doc/ncurses
/usr/share/doc/ncurses-base
/usr/share/doc/ncurses/ANNOUNCE
/usr/share/doc/ncurses/AUTHORS
/usr/share/doc/ncurses/NEWS.bz2
/usr/share/doc/ncurses/README
/usr/share/doc/ncurses/TO-DO
/usr/share/doc/ncurses-base/README
/usr/share/licenses/ncurses-base
/usr/share/licenses/ncurses-base/COPYING
So I'd say the OP had a corrupt / bad ncurses install. I'm just posting this here because this was the #1 Google result I got when I was too lazy to RTFD.
One alternative is using the option "--without-termcap"
otp_src_18.0/configure file says:
--without-termcap do not use any termcap libraries
(ncurses,curses,termcap,termlib)
./configure --prefix=/home/username/erlang/18.0 --without-termcap
Set your PATH variable as shown below.
export PATH=$PATH=/home/username/erlang/18.0/bin
Not sure about implications though. :)
Hope this helps someone.
I'm trying to use 'import Text.XML.HXT.Curl' in my project so I can have access to online files (some xml files).
So the error I get is :
Could not find module `Text.XML.HXT.Curl':
Use -v to see a list of the files searched for.
I tried :
:! cabal install curl
but I get an error that it must be on unix or cygwin, so I go on installing cygwin, now it says:
checking for gcc... gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.
cabal: Error: some packages failed to install:
curl-1.3.7 failed during the configure step. The exception was:
ExitFailure 77
:! gcc -version
Access is denied
I tried to download the curl package and install it with cmd : runHaskell Setup.hs configure but I get this :
Setup.hs: Missing dependency on a foreign library:
Missing C library: curl
This problem can usually be solved by installing the system package that provides this library (you may need the "-dev" version)
Tried installing gcc,g++,libcurl,make in cygwin, still fails.
Tried installing mingw/mysis and I failed too. Something about curl/curl.h missing.
Does anyone succeeded and can tell me how he did it ?
Installing curl on windows can be tricky. But you can try hxt-http package. It is based on native HTTP package, and doesn't require external dependencies. AFAIK it will just work out of the box on windows.
Small note: to use curl with hxt, you need to install hxt-curl package. But, yes, it will not help, cos it depends of curl package :(
So, my answer actually is about "using hxt on windows", not about "using curl on windows". You can ignore it in case it doesn't help you.
I am trying to compile a library using android-ndk-r5 standalone toolchain and autotools. When doing a ./configure, it fails with:
$ ./configure --host=arm-linux-androideabi
...snip...
checking host system type... Invalid configuration `arm-linux-androideabi': system `androideabi' not recognized
configure: error: /bin/sh ./config.sub arm-linux-androideabi failed
Explicitly setting CC and CXX does not work either (configure says to use --host).
The NDK docs and various materials online seems to indicate that using the standalone toolchain in this manner should be possible. What is wrong here? and how can I resolve it? (besides simply ditching autoconf and going back to Android.mk)
You might need a newer config.sub and config.guess, 2010-05-20 or later.
You can get the newer config.sub and config.guess from here
I took the newest from both, but that lead to errors, so I took the mentioned ones of Peter Eisentraut's date.
You can also grab config.sub and config.guess from the Ubuntu autotools-dev package:
sudo apt-get install autotools-dev
cp /usr/share/misc/config.{sub,guess} .
doing "cabal install hs-ffmpeg" fails like this:
checking for faacEncGetVersion in -lfaac... no
checking for zlibVersion in -lz... yes
checking for libdc1394... configure: error: Package requirements (libdc1394) were not met:
No package 'libdc1394' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables libdc1394_CFLAGS
and libdc1394_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
cabal: Error: some packages failed to install:
hs-ffmpeg-0.3.4 failed during the configure step. The exception was:
exit: ExitFailure 1
I have libdc1394-22 and libdc1394-22-dev installed on Ubuntu 9.10 Karmic Koala.
I'm thinking that the dependency needs to be updated to reflect the new package that supercedes libdc1394, but I'm not sure how to do that.
hs-ffmpeg's configure script is looking for a libdc1394.pc. For some reason, Ubuntu ships a libdc1394-2.pc instead.
Edit hs-ffmpeg's configure.ac to use the "correct" name and then run autoreconf, and it should work.
Something like mkdir -p ~/.pc; ln -s /usr/lib/pkgconfig/libdc1394-2.pc ~/.pc/libdc1394.pc; export PKG_CONFIG_PATH+=:~/.pc may work too.