I feel silly asking this.. but its doing my head..
if I use 'https://maps.googleapis.com/maps/api/place/autocomplete/json' and set the input parameter to say - 'Palazzo Cast' I will get about 5 suggestions - none of which will be the one I'm looking for. if I set input to 'Palazzo Castellania' I will get zero results - even though there is a place called this (see below). I've set the region parameter to 'mt'...
If I use 'https://maps.googleapis.com/maps/api/place/findplacefromtext' and set the input parameter to 'Palazzo Castellania' - I will get 'the Ministry of Health' - which is correct - however, if I put a partial string in I'll get only a single candidate which will be something different - there doesn't seem to be a way to get multiple place candidates?
I'm guessing from an API side - I have to do a multi-step process - but it would be good to get some input.
My thoughts:
I start with 'https://maps.googleapis.com/maps/api/place/autocomplete/json' - if I get an empty result, I try 'https://maps.googleapis.com/maps/api/place/findplacefromtext'
if I get a single result from either then I can pass the placeID to the places API to get more detailed data.
Make sense? It feels argly..
Edit
So watching how https://www.google.com.mt/ does it... while typing it uses suggest (and never gives the right answer, just like the API) and then when I hit enter it uses search and gives the correct answer... leading me to the conclusion that there is actually two databases happening!
Basically "its by design".. there is no fix as of Feb 2023.. My thoughts are to cache results and do a first search against that otherwise I'll probably use bing or here
Related
I am using container engine, and my pods are hosted there.
I am trying to fetch logs, using log api :
http://localhost:8000/api/v1/namespaces/app-test/pods/designer-0/log?tailLines=100&sinceTime=2017-09-17T10:47:58Z
if i used both the query params separately, it works and show the proper result, but if i am using it simultaneously only the top 100 logs are returning, the sinceTime param is get ignored.
my scenario is, i need a log from a specific time, in a chunk like, 100 lines, 100 lines.. like this.
I am not sure, whether it is a bug, or it is not implemented.
I found this from the api reference manual
https://kubernetes.io/docs/api-reference/v1.6/
tailLines - If set, the number of lines from the end of the logs to
show. If not specified, logs are shown from the creation of the
container or sinceSeconds or sinceTime
So, that means if you specify tailLines, it start from the end. I dont see any option explicitly mentioned other than limitBytes. But you will have to play around with it as it does not guarantee number of lines.
tailLines=X tells the server to start that many lines from the end
sinceTime tells the server to start from the specified time
the options are mutually exclusive
Thanks All,
I have later on recognized that, it is not ignoring the sinceTime, as the TailLines intended functionality is return the lines from the last.
So, if i mentioned the sinceTime= 10 PM yesterday, it will return the records from that time..And if also tailLines, is mentioned, so it will return the recent logs from that chunk.
So, it was working as expected. I need to play with LimitBytes for getting the logs in chunk, from that time, Instead of full logs.
Currently, I made a tool to rename view numbers (“Detail Number”) on a sheet based on their location on the sheet. Where this is breaking is the transactions. Im trying to do two transactions sequentially in Revit Python Shell. I also did this originally in dynamo, and that had a similar fail , so I know its something to do with transactions.
Transaction #1: Add a suffix (“-x”) to each detail number to ensure the new numbers won’t conflict (1 will be 1-x, 4 will be 4-x, etc)
Transaction #2: Change detail numbers with calculated new number based on viewport location (1-x will be 3, 4-x will be 2, etc)
Better visual explanation here: https://www.docdroid.net/EP1K9Di/161115-viewport-diagram-.pdf.html
Py File here: http://pastebin.com/7PyWA0gV
Attached is the python file, but essentially what im trying to do is:
# <---- Make unique numbers
t = Transaction(doc, 'Rename Detail Numbers')
t.Start()
for i, viewport in enumerate(viewports):
setParam(viewport, "Detail Number",getParam(viewport,"Detail Number")+"x")
t.Commit()
# <---- Do the thang
t2 = Transaction(doc, 'Rename Detail Numbers')
t2.Start()
for i, viewport in enumerate(viewports):
setParam(viewport, "Detail Number",detailViewNumberData[i])
t2.Commit()
Attached is py file
As I explained in my answer to your comment in the Revit API discussion forum, the behaviour you describe may well be caused by a need to regenerate between the transactions. The first modification does something, and the model needs to be regenerated before the modifications take full effect and are reflected in the parameter values that you query in the second transaction. You are accessing stale data. The Building Coder provides all the nitty gritty details and numerous examples on the need to regenerate.
Summary of this entire thread including both problems addressed:
http://thebuildingcoder.typepad.com/blog/2016/12/need-for-regen-and-parameter-display-name-confusion.html
So this issue actually had nothing to do with transactions or doc regeneration. I discovered (with some help :) ), that the problem lied in how I was setting/getting the parameter. "Detail Number", like a lot of parameters, has duplicate versions that share the same descriptive param Name in a viewport element.
Apparently the reason for this might be legacy issues, though im not sure. Thus, when I was trying to get/set detail number, it was somehow grabbing the incorrect read-only parameter occasionally, one that is called "VIEWER_DETAIL_NUMBER" as its builtIn Enumeration. The correct one is called "VIEWPORT_DETAIL_NUMBER". This was happening because I was trying to get the param just by passing the descriptive param name "Detail Number".Revising how i get/set parameters via builtIn enum resolved this issue. See images below.
Please see pdf for visual explanation: https://www.docdroid.net/WbAHBGj/161206-detail-number.pdf.html
I know there are a lot of questions about this issue, but I've reached a point where I can't really do anything else but to ask if somebody else has a solution for this issue...
Using the Foursquare api explorer to test out my query I can't seem to obtain an accurate or even good fit for the data I need to obtain.
It is quite simple. I need to obtain the closest venue from a set of coordinates. I don't mind not having results if nothing is found near by.
So, reading the API documentation (https://developer.foursquare.com/docs/venues/venues) I conclude that I need a search and not an explore because I don't want sugestions of recommended venues (and the results when I tested it proved that it wasn't what I was expecting).
So, using search api I want to find places (the place, but places would do...) close to these coordinates
ll=37.424782,-122.162989
considering that I want places close by, I add
radius=51
and I don't really want many results
limit=2
from the documentation I see that radius is
Only valid for requests with intent=browse, or requests with
intent=checkin and categoryId or query
so, I use
intent=browse
which concludes my query to:
venues/search?intent=browse&ll=37.424782,-122.162989&radius=51&limit=2
Query Result:
https://developer.foursquare.com/docs/explore#req=venues/search%3Fintent%3Dbrowse%26ll%3D37.424782,-122.162989%26radius%3D51%26limit%3D2
Here we can see that the first result is straight outside of the radius ... distance: 135
the second result however is cool ... distance: 50
What am I doing wrong to get these results? If I increase the limit all I get is more results that are also outside the radius, I could iterate through them and find the one with the smallest distance... but I have no guarantee that the closest result will be on the top X that I limit, even If I had that guarantee, it would be a tiresome solution to an apparently simple question...
Thanks for the help...
Marc
EDIT:
I managed to make have the query perform as I intended ... But I had to add all of the parent categories from:
https://developer.foursquare.com/categorytree
categoryId=
4d4b7104d754a06370d81259, Arts & Entertainment
4d4b7105d754a06372d81259, College & University
4d4b7105d754a06373d81259, Event
4d4b7105d754a06374d81259, Food
4d4b7105d754a06376d81259, Nightlife Spot
4d4b7105d754a06377d81259, Outdoors & Recreation
4d4b7105d754a06375d81259, Professional & Other Places
4e67e38e036454776db1fb3a, Residence
4d4b7105d754a06378d81259, Shop & Service
4d4b7105d754a06379d81259 Travel & Transport
making my query into:
venues/search?
intent=checkin&ll=37.424782,-122.162989&radius=60&categoryId=4d4b7104d754a06370d81259,4d4b7105d754a06372d81259,4d4b7105d754a06373d81259,4d4b7105d754a06374d81259,4d4b7105d754a06376d81259,4d4b7105d754a06377d81259,4d4b7105d754a06375d81259,4e67e38e036454776db1fb3a,4d4b7105d754a06378d81259,4d4b7105d754a06379d81259
Query Result:
https://developer.foursquare.com/docs/explore#req=venues/search%3Fintent%3Dcheckin%26ll%3D37.424782,-122.162989%26radius%3D60%26categoryId%3D4d4b7104d754a06370d81259,4d4b7105d754a06372d81259,4d4b7105d754a06373d81259,4d4b7105d754a06374d81259,4d4b7105d754a06376d81259,4d4b7105d754a06377d81259,4d4b7105d754a06375d81259,4e67e38e036454776db1fb3a,4d4b7105d754a06378d81259,4d4b7105d754a06379d81259
It still has results outside of my radius still ... but it's an acceptable error margin ... it is weird however.
I managed to make have the query perform as I intended ... But I had to add all of the parent categories from:
https://developer.foursquare.com/categorytree
categoryId=
4d4b7104d754a06370d81259, Arts & Entertainment
4d4b7105d754a06372d81259, College & University
4d4b7105d754a06373d81259, Event
4d4b7105d754a06374d81259, Food
4d4b7105d754a06376d81259, Nightlife Spot
4d4b7105d754a06377d81259, Outdoors & Recreation
4d4b7105d754a06375d81259, Professional & Other Places
4e67e38e036454776db1fb3a, Residence
4d4b7105d754a06378d81259, Shop & Service
4d4b7105d754a06379d81259 Travel & Transport
making my query into: venues/search?
intent=checkin&ll=37.424782,-122.162989&radius=60&categoryId=4d4b7104d754a06370d81259,4d4b7105d754a06372d81259,4d4b7105d754a06373d81259,4d4b7105d754a06374d81259,4d4b7105d754a06376d81259,4d4b7105d754a06377d81259,4d4b7105d754a06375d81259,4e67e38e036454776db1fb3a,4d4b7105d754a06378d81259,4d4b7105d754a06379d81259
Query Result: https://developer.foursquare.com/docs/explore#req=venues/search%3Fintent%3Dcheckin%26ll%3D37.424782,-122.162989%26radius%3D60%26categoryId%3D4d4b7104d754a06370d81259,4d4b7105d754a06372d81259,4d4b7105d754a06373d81259,4d4b7105d754a06374d81259,4d4b7105d754a06376d81259,4d4b7105d754a06377d81259,4d4b7105d754a06375d81259,4e67e38e036454776db1fb3a,4d4b7105d754a06378d81259,4d4b7105d754a06379d81259
It still has results outside of my radius still ... but it's an acceptable error margin ... it is weird however.
Although this question is old I'm responding for others. I was working on something similar to this recently and what I learned was that in order to use radius you also need to use the 'query' parameter. What I did was to use the star character '*' and it worked for me. I have to say though that the limit of 50 is something I haven't solved yet which I'm working on at the moment.
I need my [[+idx]] tv to start at 0 instead of 1 so I tried this:
[[+idx:decr]] or [[+idx:substract=1]] but it gives me -1 (minus one).
Does anyone know another way to obtain 0?
Thank you
Using this in chunk for getImageList works (at least for me):
[[+idx:decr]]
It gives: 0,1,2,3 ....
P.S. using modx revo 2.3.1
set your template variable default to 0 when you create the variable.
What are you trying to do, your question is vague at best.
UPDATE
ok - what I think will work for you is to write a snippet to do the math... where ever you call the [[+idx]] instead write a snippet
[[!FixIDX? &itemindex=`[[+idx]]`]]
then in your FixIDX snippet just do the math with php and return the corrected index. Though perhaps a custom output modifier would be the better way to go: http://rtfm.modx.com/display/revolution20/Input+and+Output+Filters+(Output+Modifiers)
Though looking at the docs, your code should certainly work - I see no reason for it not to.
I am using Cucumber with RubyMine, and I have a scenario with steps that verify some special controls from a form (I am using cucumber for automation testing). The controls don't have anything to do with each other, and there is no reason for the steps to be skipped if one in front of them fails.
Does anyone know what configurations or commands should I use to run all the steps in a scenario even if they all fail?
I think the only way to achieve desired behavior (which is quite uncommon) is to define custom steps and catch exceptions in it yourself. According to cucumber wiki step is failed if it raises an error. Almost all default steps raise error if they can't find or interact with an element on the page. If you'll catch this exceptions the step will be marked as passed, but in rescue you can provide custom output. Also I recommend you to carefully define exceptions you want to catch, I think if you're Ok if selenium can't find an element on the page rescue only from ElementNotFound exceptions, don't catch all exceptions.
I've seen a lot of threads on the Web about people wanting to continue steps execution if one failed.
I've discussed with Cucumber developers: they think this is a bad idea: https://groups.google.com/forum/#!topic/cukes/xTqSyR1qvSc
Many times, scenarios can be reworked to avoid this need: scenarios must be split into several smaller and independent scenarios, or several checks can be aggregated into one, providing a more human scenario and a less script-like scenario.
But if you REALLY need this feature, like our project do, we've done a fork of Cucumber-JVM.
This fork let you annotate steps so that when they fail with a determined exception, they will let let next steps execute anyway (and the step itself is marked as failed).
The fork is available here:
https://github.com/slaout/cucumber-jvm/tree/continue-next-steps-for-exceptions-1.2.4
It's published on the OSSRH Maven repository.
See the README.md for usage, explanation screenshot and Maven dependency.
It's only available for the Java language, tough: any help is welcome to adapt the code to Ruby, for instance. I don't think it will be a lot of work.
The question is old, but hopefully this will be helpful. What I'm doing feels kind of "wrong", but it works. In your web steps, if you want to keep going, you have to catch exceptions. I'm doing that primarily to add helpful failure messages. I'm checking a table full of values that are identified in Cucumber with a table having a bunch of rows like:
Then my result should be:
| Row Identifier | Column Identifier | Subcolum Identifier | $1,247.50 |
where the identifiers make sense in the application domain, and name a specific cell in the results table in a human-friendly way. I have helpers that convert the human identifiers to DOM IDs, which are used to first check whether the row I'm looking for exists at all, then look for the specific value in a cell in that row. The default failure message for a missing row is clear enough for me (expected to find css "tr#my_specific_dom_id" but there were no matches). But the failure message for checking specific text in a cell is completely unhelpful. So I made a step that catches the exception and uses the Cucumber step info and some element searching to get a good failure message:
Then /^my application domain results should be:$/ do |table|
table.rows.each do |row|
row_id = dom_id_for(row[0])
cell_id = dom_id_for(row[0], row[1], row[2])
page.should have_css "tr##{row_id}"
begin
page.should have_xpath("//td[#id='#{cell_id}'][text()=\"#{row[3].strip.lstrip}\"]")
rescue Capybara::ExpectationNotMet => exception
# find returns a Capybara::Element, native returns a Selenium::WebDriver::Element
contents = find(:xpath, "//td[#id='#{cell_id}']").native.text
puts "Expected #{ row[3] } for #{ row[0,2].join(' ') } but found #{ contents } instead."
#step_failures_were_rescued = true
end
end
end
Then I define a hook in features/support/hooks.rb like:
After do |scenario|
unless scenario.failed?
raise Capybara::ExpectationNotMet if #step_failures_were_rescued
end
end
This makes the overall scenario fail, but it masks the step failure from Cucumber, so all the step results are green, including the ones that aren't right. You have to see the scenario failure, then look back at the messages to see what failed. This seems kind of "bad" to me, but it works. It's WAY more convenient in my case to get the expected and found values listed in a domain-friendly context for the whole table I'm checking, rather than to get a message like "I looked for "$123.45" but I couldn't find it." There might be a better way to do this using the Capybara "within" method. This is the best I've come up with so far though.