Good Day People,
im kinda new to VBA.
Im trying to make a time and attandance.
Im actually pretty far, but unforntuanly i ran into a problem.
I use 2 Userforms. One where you get with your id to your sheet and can then clock in or clock out on the userform2.
When they clocked in or clocked it, it goes back to the first form. Unfornuatly the form doesnt work then anymore. I tried loading, hide, show, exit sub, searched the internet but cant find a solution.
Maybe im doing something wrong, that the modul / Userform doesnt work anymore.
Im thankfull for any help.
Dont mind Names of Strings and stuff, its just a test before i do the real one.
Im using the modulobject for the code. Looks better for me
So im refering in Userform1 Objects to a sub in the modullib.
Modul1:
Function DoesSheetExists(sh As String) As Boolean
Dim ws As Worksheet
On Error Resume Next
Set ws = ThisWorkbook.Sheets(sh)
On Error GoTo 0
If Not ws Is Nothing Then DoesSheetExists = True
End Function
Sub ScanID()
Dim MitarbeiterWS As Worksheet
Dim MitarbeiterID As Range
Dim MitarbeiterIDstring As String
Dim MitarbeiterName As String
ThisWorkbook.Sheets("MitarbeiterID").Activate
MitarbeiterIDstring = UserForm1.TextBox1.Value
Set MitarbeiterID = Range("A1:A30").Find(What:=MitarbeiterIDstring)
If Not MitarbeiterID Is Nothing Then
MitarbeiterName = MitarbeiterID.Offset(, 1).Value
UserForm1.Label1 = MitarbeiterName
If Not DoesSheetExists(MitarbeiterName) Then
If Not MitarbeiterName = "" Then
Sheets("Example").Copy After:=Sheets(Sheets.Count)
ActiveSheet.Name = MitarbeiterName
Unload UserForm1
UserForm2.Show
MitarbeiterID.Select
Else
End If
Else
ThisWorkbook.Sheets(MitarbeiterName).Activate
Unload UserForm1
UserForm2.Show
End If
Else
End If
End Sub
Modul2
Sub Eincloggen()
Dim Einspalte As Range
Set Einspalte = Range("A1").End(xlDown)
'wenn zum ersten mal eingeclockt
If Einspalte.Offset(, 1).Value = "" Then
If Einspalte.Value = "Clocked In" Then
Einspalte.Offset(1, 0).Value = Now
Else
MsgBox "Erst Raus"
End If
Else
Einspalte.Offset(1, 0).Value = Now
Unload UserForm2
UserForm2.Hide
UserForm1.Show
End If
End Sub
Sub Auscloggen()
Dim Einspalte As Range
Dim Ausspalte As Range
Dim Pausenspalte As Range
Dim Stundenspalte As Range
Set Einspalte = Range("A1").End(xlDown)
Set Ausspalte = Range("B1").End(xlDown)
Set Pausenspalte = Range("C1").End(xlDown)
Set Stundenspalte = Range("D1").End(xlDown)
If Ausspalte.Offset(1, -1).Value = "" Then
MsgBox "Erst Rein"
Else
Ausspalte.Offset(1, 0).Value = Now
If Not Ausspalte.Offset(1, 0).Value = "" Then
Stundenspalte.Offset(1, 0).Value = (Ausspalte.Offset(1, 0).Value) - (Einspalte.Value)
Stundenspalte.Offset(1, 0).NumberFormat = "hh:mm"
Unload UserForm2
UserForm2.Hide
UserForm1.Show
End If
End If
End Sub
Related
So I have a form called "Print_Form" that has 20 checkboxes that upon form initialization take on the sheet names of the first 20 sheets of my workbook.
(no issue with the UserForm_Initialize() sub, this works fine)
Private Sub UserForm_Initialize()
CheckBox1.Caption = Sheets(1).Name
CheckBox2.Caption = Sheets(2).Name
CheckBox3.Caption = Sheets(3).Name
CheckBox4.Caption = Sheets(4).Name
CheckBox5.Caption = Sheets(5).Name
CheckBox6.Caption = Sheets(6).Name
CheckBox7.Caption = Sheets(7).Name
CheckBox8.Caption = Sheets(8).Name
CheckBox9.Caption = Sheets(9).Name
CheckBox10.Caption = Sheets(10).Name
CheckBox11.Caption = Sheets(11).Name
CheckBox12.Caption = Sheets(12).Name
CheckBox13.Caption = Sheets(13).Name
CheckBox14.Caption = Sheets(14).Name
CheckBox15.Caption = Sheets(15).Name
CheckBox16.Caption = Sheets(16).Name
CheckBox17.Caption = Sheets(17).Name
CheckBox18.Caption = Sheets(18).Name
CheckBox19.Caption = Sheets(19).Name
CheckBox20.Caption = Sheets(20).Name
End Sub
Where I am running into issues is in the following sub routine when the user clicks the print button in the form. The intention behind this button is to print all the sheets that the user has selected (i.e. the sheets that had their corresponding checkbox checked by the user). Currently, when I select multiple checkboxes and then click on the print button I get the following error; "Run-Time error '9': Subscript out of range.
Private Sub cmdPrint_Click()
Dim i As Integer
Dim cb As MSForms.Control
Dim SheetArray() As String
i = 0
'Search form for a checkbox
For Each cb In Me.Controls
i = i + 1
ReDim Preserve SheetArray(i)
'If the control is a checkbox
If TypeName(cb) = "CheckBox" Then
'and the checkbox is checked
If cb.Value = True Then
'Add the sheet to the sheet array (sheet name string was already added to the checkbox property caption; see UserForm_initialize)
SheetArray(i) = cb.Caption
End If
End If
Next cb
'Print Sheet Array
Sheets(SheetArray()).PrintOut
Unload Me
End Sub
If anyone has any ideas that would help me get this to work I would be very appreciative. Thank you in advance. :)
Try this:
Private Sub UserForm_Initialize()
Dim i As Long
For i = 1 To 20 'less typing....
Me.Controls("CheckBox" & i).Caption = Sheets(i).Name
Next i
End Sub
Private Sub cmdPrint_Click()
Dim i As Integer, s As String, sep
For i = 1 To 20
With Me.Controls("CheckBox" & i)
If .Value Then
s = s & sep & .Caption
sep = "," 'add delimiter after first item
End If
End With
Next i
Sheets(Split(s, ",")).PrintOut
Unload Me
End Sub
I have written a code that finds all the dye word and sum all the dye word value.
Here is the code
Dim name As String
name = "dye"
Dim findDyeRange As Range
Set findDyeRange = Range("Q10:S61")
Set firstDyeWord = findDyeRange.Find(name)
If firstDyeWord Is Nothing Then
msgbox "nothing found"
Else
firstDyeValue = firstDyeWord.Offset(0, 1).Value
Set secondDyeWord = findDyeRange.FindNext(firstDyeWord)
If secondDyeWord.Address = firstDyeWord.Address Then
MsgBox firstDyeValue
Exit Sub
Else
secondDyeValue = secondDyeWord.Offset(0, 1).Value
Set thirdDyeWord = findDyeRange.FindNext(secondDyeWord)
If thirdDyeWord.Address = firstDyeWord.Address Then
MsgBox firstDyeValue + secondDyeValue
Exit Sub
Else
thirdDyeValue = thirdDyeWord.Offset(0, 1).Value
Set fourthDyeWord = findDyeRange.FindNext(thirdDyeWord)
If fourthDyeWord.Address = firstDyeWord.Address Then
MsgBox firstDyeValue + secondDyeValue + thirdDyeValue
Exit Sub
Else
fourthDyeValue = fourthDyeWord.Offset(0, 1).Value
Set fifthDyeWord = findDyeRange.FindNext(fourthDyeWord)
If fifthDyeWord.Address = firstDyeWord.Address Then
MsgBox firstDyeValue + secondDyeValue + thirdDyeValue + fourthDyeValue
Exit Sub
Else
fifthDyeValue = fifthDyeWord.Offset(0, 1).Value
Set sixthDyeWord = findDyeRange.FindNext(fifthDyeWord)
If sixthDyeWord.Address = firstDyeWord.Address Then
MsgBox firstDyeValue + secondDyeValue + thirdDyeValue + fourthDyeValue + fifthDyeValue
Exit Sub
Else
sixthDyeValue = sixthDyeWord.Offset(0, 1).Value
MsgBox firstDyeValue + secondDyeValue + thirdDyeValue + fourthDyeValue + fifthDyeValue + sixthDyeValue
End If
End If
End If
End If
End If
End If
the code runs well. But when I removes the msgbox and set a code then it throws an error.
I want this code
If firstDyeWord Is Nothing Then
Range("A9").value = 7
But it throws error "method find of object range failed in vba"
Help Please!
According to the documentation of the Range.Find method you must at least specify the parameters LookIn, LookAt, SearchOrder and MatchByte when using Find() otherwise it uses what ever was used last by either VBA or the user interface.
Since you cannot know what your users used last in the user interface your search might randomly work and randomly come up with wrong results. Therefore always specify all of these 4 parameters to make it reliable.
Additionally you must specify in which workbook/worksheet your ranges are. Otherwise Excel guesses and it might guess the wrong sheet.
Make sure to declare all your variables properly. I recommend always to activate Option Explicit: In the VBA editor go to Tools › Options › Require Variable Declaration.
Public Sub Example()
Dim ws As Worksheet
Set ws = ThisWorkbook.Worksheets("Sheet1") 'set your workbook and worksheet!
Dim name As String
name = "dye"
Dim findDyeRange As Range
Set findDyeRange = ws.Range("Q10:S61") 'specify in which sheet the range is
Dim firstDyeWord As Range
Set firstDyeWord = findDyeRange.Find(What:=name, LookIn:=xlFormulas, LookAt:=xlWhole, SearchOrder:=xlByRows, MatchByte=False)
If firstDyeWord Is Nothing Then
'dye was NOT found
ws.Range("A9").Value = 7 'specify in which sheet the range is
Else
'do something else if dye was found
End If
End Sub
// Edit (see comment)
If this is used in an event like Worksheet_Change you need to turn off events before writing to a cell. Otherwise this will trigger another event which will trigger another event … and you get stuck in an endless loop of events, which cannot work:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim ws As Worksheet
Set ws = ThisWorkbook.Worksheets("Sheet1") 'set your workbook and worksheet!
Dim name As String
name = "dye"
Dim findDyeRange As Range
Set findDyeRange = ws.Range("Q10:S61") 'specify in which sheet the range is
Dim firstDyeWord As Range
Set firstDyeWord = findDyeRange.Find(What:=name, LookIn:=xlFormulas, LookAt:=xlWhole, SearchOrder:=xlByRows, MatchByte=False)
If firstDyeWord Is Nothing Then
'dye was NOT found
On Error Goto REACTIVATE_EVENTS 'in any case of error reactivate events
Application.EnableEvents = False 'disable events or .Value = 7 triggers another change event.
ws.Range("A9").Value = 7 'specify in which sheet the range is
Application.EnableEvents = True 'make sure you never leave events disabled otherwise they will stay off until you restart Excel.
Else
'do something else if dye was found
End If
Exit Sub
REACTIVATE_EVENTS:
Application.EnableEvents = True
If Err.Number <> 0 Then Err.Raise Err.Number, Err.Source, Err.Description, Err.HelpFile, Err.HelpContext 'show error message if there was an error.
End Sub
I'm new at VBA coding and working on a match code. The code is working just fine when I run the code in "Data sheet" (the sheet were all my data is and were the match has to be found), but when i'm run the code on the frontpage (Sheet 1 with userforms) the code is debuggen and says "Runtime Error 13". Can anybody tell what the problem is?
And can anybody tell me why my "If isError" doesn't work?
Thanks in advance!
Br
'Find SKU and Test number
Dim icol As Integer
Sheet13.Range("XFD2") = UserForm2.ComboBox1.Value 'Sættes = ComboBox1.value
Sheet13.Range("XFD3") = UserForm2.ComboBox2.Value 'Sættes = ComboBox2.value
icol = [Sheet13.MATCH(XFD2&XFD3,A:A&Q:Q,0)] 'Match af værdien for vores SKU og test nr
With ThisWorkbook.Worksheets("Data sheet")
'If SKU or Test number not found, then messagebox
If IsError("A:A") Then MsgBox "SKU not found": Exit Sub
If IsError("Q:Q") Then MsgBox "Test number not found": Exit Sub
'Add test result/next step and comment
.Cells(icol, 30).Value = Me.ComboBox3.Value
.Cells(icol, 30 + 1).Value = Me.Comments_To_Result.Value
End With
End If
Set objFSO = Nothing
Set openDialog = Nothing
Range("XFD2").Clear
Range("XFD3").Clear
icol should be like this:
icol = Application.match(arg1, arg2, arg3)
See the samples in MSDN:
var = Application.Match(Cells(iRow, 1).Value, Worksheets(iSheet).Columns(1), 0)
Concerning If IsError("A:A") Then MsgBox "SKU not found": Exit Sub, you are doing it wrongly. I assume, that you want to loop through all the cells in the first column and to get whether one of them is an error. You need a loop for this. This is a really simple one, but you should implement it somehow in your code:
Option Explicit
Public Sub TestMe()
Dim rng As Range
For Each rng In Range("A:A")
If IsError(rng) Then Debug.Print rng.Address
Next rng
End Sub
The following is my VB code. I want to count all the distinct records about "Peter" in a spreadsheet without duplication.
When I run the code, "Run-time error '13':Type Mismatch" always appear. I fail to debug. What's wrong with my code?
Private Sub CheckBox5_Click()
Dim myarray As Variant
myarray = WorksheetFunction.If(Range("C7:C266") = "Peter", 1 / (WorksheetFunction.CountIfs(Range("C7:C266"), "Peter", Range("F7:F266"), Range("F7:F266"))), 0)
If CheckBox5.Value = True Then
TextBox6.Value = WorksheetFunction.Sum(myarray) + 1
End If
If CheckBox5.Value = False Then
TextBox6.Value = ""
End If
End Sub
The error you are getting is a result of the way the IF function is called. The first term must be a logical result, but you cannot call the value of a multi-cell Range (ie Range("C7:C266")). To solve this problem, I think you will need to loop through each of the cells and act on them accordingly, although there may be a more clever solution using something other than IF that I am not aware of
You can do it like this:
Sub findPeter()
Dim ws As Worksheet
Dim peterCount As Long
Set ws = Worksheets("nameofyoursheet")
With ws
For i = 7 To 266
If .Cells(i, 3) = "Peter" Then
peterCount = peterCount + 1
End If
Next
End With
If CheckBox5.Value = True Then
TextBox6.Value = peterCount + 1
End If
If CheckBox5.Value = False Then
TextBox6.Value = ""
End If
End Sub
peterCount is the sum of all occurences of the value Peter.
new and would like to ask if someone could possibly check my code to see where i'm making a mistake.
first, i've created a form with two textboxes and two buttons that will go and get two different directories and the associated files. this is done through a call to a function that loads the dir to the textboxes.
a button to call a function to navigate dir and get the file
Private Sub CommandButton3_Click()
'call selectFile function to select file
selectFile
End Sub
function to get workbooks into textboxes 1 and 2:
Public Function selectFile()
Dim fileNamePath1 As String
Dim fileNamePath2 As String
Dim workbookFilePath1 As String
Dim workbookFilePath2 As String
On Error GoTo exit_
If workbookFilePath1 = Empty And workbookFilePath2 = Empty Then
fileNamePath1 = Application.GetOpenFilename(FileFilter:="Excel Files (*.xls), *.xls", Title:="Open Workbook 1", MultiSelect:=False)
workbookFilePath1 = Dir(fileNamePath1)
'TextBox1.Text = workbookFilePath1
TextBox1.Value = fileNamePath1
fileNamePath2 = Application.GetOpenFilename(FileFilter:="Excel Files (*.xls), *.xls", Title:="Open Workbook 2", MultiSelect:=False)
workbookFilePath2 = Dir(fileNamePath2)
TextBox2.Value = fileNamePath2
If fileNamePath1 = False Or fileNamePath2 = False Then
MsgBox ("File selection was canceled.")
Exit Function
End If
End If
exit_:
End Function
up to here, the code is ok... can do better, but
here's where problems occur... i'd like to pass the directories as objects into the module to diff
button that executes module to diff:
Private Sub CommandButton1_Click()
getTheWorkbooksToCompare(fileNamePath1, fileNamePath2)
End Sub
i know that i've changed myPath1 and myPath2 to Workbooks, where I've had them as strings before
diffing module
Public Sub gettheWorkbooksToCompare(myPath1 As Workbook, myPath2 As Workbook)
Dim myExcelObj
Dim WorkbookObj1
Dim WorkbookObj2
Dim WorksheetObj1
Dim WorksheetObj2
Dim file1 As String
Dim file2 As String
Dim myWorksheetCounter As Integer
Dim i As Worksheet
Set myExcelObj = CreateObject("Excel.Application")
myExcelObj.Visible = True
Set file1 = Dir(myPath1)
Set file2 = Dir(myPath2)
Set WorkbookObj1 = myExcelObj.Workbooks.Open(file1)
Set WorkbookObj2 = myExcelObj.Workbooks.Open(file2)
Set NewWorkbook = myExcelObj.Workbooks.Add
While WorkbookObj1 <> Null And WorkbookObj2 <> Null
'While WorkbookObj1.ActiveWorkbook.Worksheets.count = WorkbookOjb2.ActiveWorkbook.Worksheets.count
myWorksheetCounter = ActiveWorkbook.Worksheets.count
myWorksheetCount = ActiveWorkbook.Worksheets.count
If WorksheetObj1.Worksheets.myWorksheetCounter = WorkbookObj2.Worksheets.myWorksheetCounter Then
Set WorksheetObj1 = WorkbookObj1.Worksheets(myWorksheetCounter)
Set WorksheetObj2 = WorkbookObj2.Worksheets(myWorksheetCounter)
Set myNewWorksheetObj = NewWorkbook.Worksheets(myWorksheetCounter)
For myWorksheetCounter = i To WorksheetObj1
For myWorksheetCount = j To WorksheetOjb2
'If cell.Value myWorksheetObj2.Range(cell.Address).Value Then
If cell.Value = myWorksheetObj2.Range(cell.address).Value Then
myNewWorksheetObj.Range(cell.address).Value = cell.address.Value
myNewWorksheetObj.Range(cell.address).Interior.ColorIndex = 3
Else
cell.Interior.ColorIndex = 0
End If
Next
'if doesn't work... use SaveChanges = True
myNewWorksheetObj.Workbooks.Save() = True
Next
Else
MsgBox ("The worksheets are not the same worksheets." & vbNewLine & "Please try again.")
End If
Wend
Set myExcelObj = Nothing
End Sub
So my question is... can someone please assist in seeing where i'm going wrong? essentially, i'm having some issues in trying to get this working.
much appreciated
i've gone through and cleaned up some areas a little bit... but now have a: "run time error '438': object doesn't support this propety or method" at the while loop code that i've updated the post with
I see a typo on CommandButton1_Click
Private Sub CommandButton1_Click()
getTheWorkbooksToCompare(fileNamePath1, fileNamePath2)
End Sub
Public Sub gettheWorkbooksToCompare(myPath1 As Workbook, myPath2 As Workbook)
There might be something more, but your not capitalizing the "T" in getThe, but you call it that way.