i want to resize osg viewer window dynamically based on an external event like pressing 'a' key on keyboard. through reading the Veiwer.cpp codes in osg core, i found this line of code for resizing window:
getEventQueue()->windowResize(newX, newY, newWidth, newHeight);
so i used it in my code:
while (!viewer->done()) {
viewer->frame();
if (bConditionMet) viewer->getEventQueue()->windowResize(newX, newY, newWidth, newHeight);
}
but when i call this function it seems that it is ineffective (window size and location doesn't change) . so the question is how can i do this job properly?
Related
Here's the deal, im trying to create a popup window that uses a dynamic text,
when the text is too large i would like to cap the height of the window and
use a scrollbar instead to navigate through it but it does not seems to be
working.
code:
final Dialog dialog = new Dialog();
dialog.setMessage(direttivaDescription);
dialog.setOverflow(Overflow.AUTO);
dialog.setWidth(600);
dialog.setHeight(50);
dialog.setIcon(someIcon);
dialog.setButtons(new Button("OK"));
dialog.addButtonClickHandler(new ButtonClickHandler() {
public void onButtonClick(ButtonClickEvent event) {
dialog.hide();
}
});
dialog.draw();
If the text is too large the window height will be resized accordingly. The funny
part is that setWidth method seems to be working just fine.
You need a container such as HLayout, VLayout, DynamicForm etc. where you can add the message in it then finally add the container in the Dialog.
Sample code:
VLayout vLayout=new VLayout();
vLayout.addMember(new Label(message));
vLayout.setOverflow(Overflow.AUTO);
vLayout.setWidth100();
...
dialog.addItem(vLayout);
dialog.draw();
snapshot:
I'm a little new to using MFC and VC++ as such, but I'm doing this as part of a Course and i Have to stick to VC++.
http://www.cprogramming.com/tutorial/game_programming/same_game_part1.html
This is the tutorial I have been following to make a simple samegame. However when i try to display score, the score is getting displayed Underneath or outside my application window, even though I've displayed score before calling updateWindow(). I've tried various methods but I am kinda lost here.
Here is the code I'm using to Display the score:
void CSameGameView::updateScore()
{
CSameGameDoc* pDoc = GetDocument();
CRect rcClient, rcWindow;
GetClientRect(&rcClient);
GetParentFrame()->GetWindowRect(&rcWindow);
int nHeightDiff = rcWindow.Height() - rcClient.Height();
rcScore.top=rcWindow.top + pDoc->GetHeight() * pDoc->GetRows() + nHeightDiff;
rcScore.left=rcWindow.left + 50;
rcScore.right=rcWindow.left + pDoc->GetWidth() - 50;
rcScore.bottom=rcScore.top + 20;
CString str;
double points = Score::getScore();
str.Format(_T("Score: %0.2f"), points);
HDC hDC=CreateDC(TEXT("DISPLAY"),NULL,NULL,NULL);
COLORREF clr = pDoc->GetBoardSpace(-1, -1); //this return background colour
pDC->FillSolidRect(&rcScore, clr);
DrawText(hDC, (LPCTSTR) str, -1, (LPRECT) &rcScore, DT_CENTER);
}
Thank you for any help and I'm sorry if the question doesn't make sense or in ambiguous.
There are several problems with your code:
1. The hDC you are creating is going to have coordinates relative to the desktop window. To paint text in your window, use CClientDC like this: CClientDC dc(this); (see http://msdn.microsoft.com/en-US/library/s8kx4w44%28v=vs.80%29.aspx)
2. The code you have will leak a DC every time the function is called. The method in #1 will fix that.
3. Your paint code should be done in the CView::OnDraw. There you get a DC passed to you and you don't have to worry about creating one with CClientDC. Set the variables you want to draw (e.g. your points or score), store them as class members and draw them in CView::OnDraw.
Don't do the drawing in your updateScore method.
Make sense? Hang in there!
I am trying to draw a GtkLayout using cairo. The layout is huge and I need to get the part that is visible in the container window and update that part only. With GTK2 the expose event data was sufficient to do this. I am not successful with GTK3.
In the function to handle "draw" events, I did the following:
GdkWindow *gdkwin; // window to draw
cairo_region_t *cregion; // update regions
cairo_rectangle_int_t crect; // enclosing rectangle
gdkwin = gtk_layout_get_bin_window(GTK_LAYOUT(layout));
cregion = gdk_window_get_update_area(gdkwin);
cairo_region_get_extents(cregion,&crect);
expy1 = crect.y; // top of update area
expy2 = expy1 + crect.height; // bottom of update area
The problem is that cregion has garbage. Either gdk_window_get_update_area() is buggy or I am not using the right drawing window.
Passing the GtkLayout as follows also does not work (this is the function arg for g_signal_connect):
void draw_function(GtkWidget *layout, cairo_t *cr, void *userdata)
Whatever gets passed is not the GtkLayout from g_signal_connect, but something else.
================= UPDATE ====================
I found a way to do what I want without using GtkLayout.
I am using a GtkDrawingArea inside a viewport.
I can scroll to any window within the large graphic layout
and update that window only. Works well once I figured out
the cryptic docs.
scrwing = gtk_scrolled_window_new(0,0);
gtk_container_add(GTK_CONTAINER(vboxx),scrwing);
drwing = gtk_drawing_area_new();
gtk_scrolled_window_add_with_viewport(GTK_SCROLLED_WINDOW(scrwing),drwing);
gtk_scrolled_window_set_policy(SCROLLWIN(scrwing),ALWAYS,ALWAYS);
scrollbar = gtk_scrolled_window_get_vadjustment(GTK_SCROLLED_WINDOW(scrwing));
MFC doc/view architecture, sdi (more precisely multiple top-level windows).
In my view class, I set my "playground" (i.e. logical space) with SetScrollSizes(); Then I want to limit maximum frame window size to that of view's maximum size.
Here is what I'm doing but I think there might be better solution, please advice:
I'm implementing OnGetMinMaxInfo() in my CMainFrame. There I try to get active view's scroll sizes, and set lpMMI->ptMaxTrackSize appropriately. Below is the code:
void CMainFrame::OnGetMinMaxInfo(MINMAXINFO* lpMMI)
{
// Call base version:
CFrameWndEx::OnGetMinMaxInfo(lpMMI);
// Get active view:
CScrollView *pScrollView = (CScrollView *)GetActiveView();
if (pScrollView && pScrollView->IsKindOf(RUNTIME_CLASS(CMyFckinView)))
{
// Get total size of playground:
CSize sizePlayground = pScrollView->GetTotalSize();
// Test if the size is non-zero, i.e. there is at least one node displayed:
if (sizePlayground.cx && sizePlayground.cy/* && !IsPrintPreview()*/)
{
// Set maximum window size to match our playground size:
CRect rectClient, rectWindow;
pScrollView->GetClientRect(&rectClient);
this->GetWindowRect(&rectWindow);
if (rectWindow.top > -5000 && rectWindow.left > -5000) // Avoid when minimized...
{
lpMMI->ptMaxTrackSize.x = sizePlayground.cx + (rectWindow.Width() - rectClient.Width());
lpMMI->ptMaxTrackSize.y = sizePlayground.cy + (rectWindow.Height() - rectClient.Height());
return;
}
}
}
}
This works but has one problem: When print preview is displayed (standard MFC print preview), I obviously want to allow free window resizing, so I use runtime info GetActiveView()->IsKindOf(...) to determine that active view is really my view, and not print-preview's view (which is CPreviewViewEx). But when I close the print preview, OnGetMinMaxInfo is not called, so I'm unable to adjust frame size according to my view again. As soon as I move the window OnGetMinMaxInfo gets called again and correctly adjusts frame size, but without manually moving the window old size (to which the print preview was sized to) is retained and has ugly artifact.
What can I do? Basically if I could trap the moment when print preview is closed, I could use following trick:
// Trigger the WM_MINMAXINFO message:
CFrameWnd *pFrame = GetParentFrame();
RECT rectWindow;
pFrame->GetWindowRect(&rectWindow);
pFrame->MoveWindow(&rectWindow);
But I don't know how to trap print-preview closure.
What I'm trying to accomplish seems quite standard: who would want to have frame window resized bigger than view's logical size (set by SetScrollSizes())? So there should be some more natural solution maybe?
In your CMyFckinView, handle a message that is reliably sent when the print preview is closed and then post a user message to the mainframe which will trigger your "force minmax" code. Perhaps WM_FOCUS or WM_ACTIVATE?
I am trying to put in an icon (a scaled image) as part of a button that also contains some text. I am programming in J2ME for the Nokia SDK (S60 device) and using Eclipse.
The code is as follows:
but = new Button("Some text");
Image img = null;
try {
img = Image.createImage("/flower.png");
} catch(IOException e) {
e1.printStackTrace();
}
but.setIcon(img);
The above lines are the code that works properly. I am facing problems in scaling the image to the size of the button. Whenever I try to do that, I get a divide by zero error. The function I am using to scale the image and the way it is being scaled is:
Image img2 = null;
img2 = img.scaled(but.getWidth()/2, but.getHeight());
but.setIcon(img2);
I am unable to figure out why I get a divide by zero error every time I try to run the above code. Is there some other function that I should use? Or is there something I am missing ?
which UI Framework are using, is it LWUIT? if yes, you can't get the width/height of any component before showing the form, you should use getPreferredWidth instead