PyTorch error when downloading https://github.com/zeyad-mansour/lunar - pytorch

pip install pytorch
Collecting pytorch
Using cached pytorch-1.0.2.tar.gz (689 bytes)
Preparing metadata (setup.py) ... done
Building wheels for collected packages: pytorch
Building wheel for pytorch (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "", line 2, in
File "", line 34, in
File "C:\Users\isamu\AppData\Local\Temp\pip-install-ib00i94p\pytorch_f353fda7bc1a41bdabf99f644cf66bcb\setup.py", line 15, in
raise Exception(message)
Exception: You tried to install "pytorch". The package named for PyTorch is "torch"
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for pytorch
Running setup.py clean for pytorch
Failed to build pytorch
Installing collected packages: pytorch
Running setup.py install for pytorch ... error
error: subprocess-exited-with-error
× Running setup.py install for pytorch did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "", line 2, in
File "", line 34, in
File "C:\Users\isamu\AppData\Local\Temp\pip-install-ib00i94p\pytorch_f353fda7bc1a41bdabf99f644cf66bcb\setup.py", line 11, in
raise Exception(message)
Exception: You tried to install "pytorch". The package named for PyTorch is "torch"
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> pytorch
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.
tried:
pip install torch
pip3 install efficiencynet_pytorch
pip install pytorch
but didn't help

Related

pip install websocket - Error: subprocess-exited-with-error. Cant execute `setup.py` since setuptools is not available in the build environment

pip --version pip 23.0 from C:\Users\sebas\AppData\Local\Programs\Python\Python310\lib\site-packages\pip (python 3.10)
python --version 3.10.4
$ pip install websocket
Collecting websocket
Using cached websocket-0.2.1.tar.gz (195 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [1 lines of output]
ERROR: Can not execute `setup.py` since setuptools is not available in the build environment.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Any idea what's going on here? I have never seen such an error before.

Virtualenv error: command 'cmake' failed: No such file or directory

I get the following error in my virtualenv when installing; snowflake-connector-python
% pip3 install snowflake-connector-python
Collecting snowflake-connector-python
Downloading snowflake-connector-python-2.9.0.tar.gz (394 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 394.3/394.3 kB 3.9 MB/s eta 0:00:00
Installing build dependencies ... error
error: subprocess-exited-with-error
...
Building wheels for collected packages: pyarrow
Building wheel for pyarrow (pyproject.toml): started
Building wheel for pyarrow (pyproject.toml): finished with status 'error'
error: subprocess-exited-with-error
...
Traceback (most recent call last):
File "/my_virtualenvs/tester/bin/cmake", line 5, in <module>
from cmake import cmake
ModuleNotFoundError: No module named 'cmake'
error: command '/my_virtualenvs/tester/bin/cmake' failed with exit code 1
cmake is installed in the directory noted in the error and is available via the PATH:
% ECHO $PATH
/my_virtualenvs/tester/bin/cmake:/my_virtualenvs/tester/bin:/opt/homebrew/bin:/opt/homebrew/sbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin
I can import cmake in the Python shell and call it via the terminal:
% bin/cmake --version
cmake version 3.25.0
Environment:
MacOS 12.5 Monterey
Apple Silicon M1
How can I solve this error?

Why setup.py fails in pyBigWig installation?

Hi verybody I am trying to install RSeQC but I got an error installing pyBigWig.
I am using a conda environment with python 3.8.
The OS is a Windows 10 Pro.
(python3.8) C:\Users\me>pip --version
pip 22.1.2 from C:\Users\me\Anaconda3\envs\python3.8\lib\site-packages\pip (python 3.8)
(python3.8) C:\Users\me>pip install RSeQC
Collecting RSeQC
Downloading RSeQC-4.0.0-py3-none-any.whl (133 kB)
---------------------------------------- 133.6/133.6 kB 438.8 kB/s eta 0:00:00
Collecting bx-python
Downloading bx-python-0.8.13.tar.gz (1.4 MB)
---------------------------------------- 1.4/1.4 MB 1.0 MB/s eta 0:00:00
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Collecting cython>=0.17
Using cached Cython-0.29.30-py2.py3-none-any.whl (985 kB)
Collecting pyBigWig
Downloading pyBigWig-0.3.18.tar.gz (64 kB)
---------------------------------------- 64.8/64.8 kB 699.9 kB/s eta 0:00:00
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\me\AppData\Local\Temp\pip-install-j0xpd3pz\pybigwig_d3408484097f434884b2c8954968140e\setup.py", line 24, in <module>
for e in sysconfig.get_config_vars('BLDLIBRARY')[0].split():
AttributeError: 'NoneType' object has no attribute 'split'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Hope anyone can help with this issue.

ERROR: Could not build wheels for opencv-contrib-python which use PEP 517 and cannot be installed directly

pip install --upgrade pip setuptools wheel then ran this with a version specified: pip install -U opencv-python==4.5.5.62
Iam getting following errors.. How to proceed ? Thank you in advance.
Processing e:\tensorflow\models\research
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [25 lines of output]
C:\ProgramData\Anaconda3\lib\site-packages\setuptools_importlib.py:23: UserWarning: importlib-metadata version is incompatible with setuptools.
This problem is likely to be solved by installing an updated version of importlib-metadata.
warnings.warn(msg) # Ensure a descriptive message is shown.
Traceback (most recent call last):
File "", line 36, in
File "", line 14, in
File "C:\ProgramData\Anaconda3\lib\site-packages\setuptools_init_.py", line 18, in
from setuptools.dist import Distribution
File "C:\ProgramData\Anaconda3\lib\site-packages\setuptools\dist.py", line 35, in
from .importlib import metadata
File "C:\ProgramData\Anaconda3\lib\site-packages\setuptools_importlib.py", line 39, in
disable_importlib_metadata_finder(metadata)
File "C:\ProgramData\Anaconda3\lib\site-packages\setuptools_importlib.py", line 12, in disable_importlib_metadata_finder
import importlib_metadata
File "C:\ProgramData\Anaconda3\lib\site-packages\importlib_metadata_init.py", line 466, in
version = version(name)
File "C:\ProgramData\Anaconda3\lib\site-packages\importlib_metadata_init_.py", line 433, in version
return distribution(package).version
File "C:\ProgramData\Anaconda3\lib\site-packages\importlib_metadata_init_.py", line 406, in distribution
return Distribution.from_name(package)
File "C:\ProgramData\Anaconda3\lib\site-packages\importlib_metadata_init_.py", line 175, in from_name
dists = resolver(name)
File "C:\ProgramData\Anaconda3\lib\site-packages\setuptools_vendor\importlib_metadata_init_.py", line 886, in find_distributions
found = self._search_paths(context.name, context.path)
AttributeError: 'str' object has no attribute 'name'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
This versions and commands solved the issue.
pip install setuptools==60.8.2
pip install -U opencv-python==4.5.5.62
python -m pip install --user --upgrade pip
python -m pip install

error with downloading librosa in raspberry3

I want to download librosa in raspberry3 (python3.7.3)
when I tried to install llvmlite, this error happens.
please help me. thank u.
pi#raspberrypi:~ $ sudo pip3 install llvmlite
Building wheel for llvmlite (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [15 lines of output]
running bdist_wheel
/usr/bin/python3 /tmp/pip-install-0wqpwf39/llvmlite_1031f7d563fb4394ac842e0554709d18/ffi/build.py
LLVM version... 7.0.1
Traceback (most recent call last):
File "/tmp/pip-install-0wqpwf39/llvmlite_1031f7d563fb4394ac842e0554709d18/ffi/build.py", line 220, in <module>
main()
File "/tmp/pip-install-0wqpwf39/llvmlite_1031f7d563fb4394ac842e0554709d18/ffi/build.py", line 210, in main
main_posix('linux', '.so')
File "/tmp/pip-install-0wqpwf39/llvmlite_1031f7d563fb4394ac842e0554709d18/ffi/build.py", line 172, in main_posix
raise RuntimeError(msg)
RuntimeError: Building llvmlite requires LLVM 11.x.x, got '7.0.1'. Be sure to set LLVM_CONFIG to the right executable path.
Read the documentation at http://llvmlite.pydata.org/ for more information about building llvmlite.
error: command '/usr/bin/python3' failed with exit status 1
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for llvmlite
Running setup.py clean for llvmlite
Failed to build llvmlite
Installing collected packages: llvmlite
Running setup.py install for llvmlite ... error
error: subprocess-exited-with-error
× Running setup.py install for llvmlite did not run successfully.
│ exit code: 1
╰─> [18 lines of output]
running install
running build
got version from file /tmp/pip-install-0wqpwf39/llvmlite_1031f7d563fb4394ac842e0554709d18/llvmlite/_version.py {'version': '0.38.1', 'full': '650c36d5a79e3825d26fb44f4abd853729a9b959'}
running build_ext
/usr/bin/python3 /tmp/pip-install-0wqpwf39/llvmlite_1031f7d563fb4394ac842e0554709d18/ffi/build.py
LLVM version... 7.0.1
Traceback (most recent call last):
File "/tmp/pip-install-0wqpwf39/llvmlite_1031f7d563fb4394ac842e0554709d18/ffi/build.py", line 220, in <module>
main()
File "/tmp/pip-install-0wqpwf39/llvmlite_1031f7d563fb4394ac842e0554709d18/ffi/build.py", line 210, in main
main_posix('linux', '.so')
File "/tmp/pip-install-0wqpwf39/llvmlite_1031f7d563fb4394ac842e0554709d18/ffi/build.py", line 172, in main_posix
raise RuntimeError(msg)
RuntimeError: Building llvmlite requires LLVM 11.x.x, got '7.0.1'. Be sure to set LLVM_CONFIG to the right executable path.
Read the documentation at http://llvmlite.pydata.org/ for more information about building llvmlite.
error: command '/usr/bin/python3' failed with exit status 1
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> llvmlite

Resources