I have created a Time triggered web job and after deploying it I need to run it manually for the first time. After the manual start, it run at a specified interval.
Is it possible scheduler start without clicking on run button?
Is it possible scheduler start without clicking on run button?
After reproducing issue from my side AFAIK ,
In webjob we need to run it manually for the first time after the manual start, it run at a specified interval.
But if you want to run it manually with out clicking on RUN it is possible in logicapps.
If you are okay with the alternative method try to follow the below steps of logic App.
1.Created Web jobs in App service as expected it is running after clicking on refresh or Run buttons
2. So for manual trigger of webjob followed the document and created logicapp and got the espected results.
3. Created logicapp workflow as shown below .
Here taking Recurrence trigger it runs every 3 minutes.You can change the interval and frequency based on your requirement
4.Next taking HTTP action in HTTP action fill the below details
Method: POST
URI: Web job URL
Authentication type: Basic
Username
Password
In appservice select the webjob and click on properties there you will get URL ,USER NAME and PASSWORD as shown in below image.
Then click on SAVE and RUN the trigger then it automatically runs based on the schedule.
Logic App ran successfully as shown below
In overview look for Run history for the results. Now the application would trigger the webjobs as per the schedule.
As shown in runhistory based on my interval it runs once in every three minutes.
Also try to refer this
Related
I have a Web activity that performs a GET operation to an endpoint. I have set it up to do something On Failure (which works just fine) and another set of action upon Success. But this last part gets skipped entirely even though the output of the Web action is Succeeded.
Here is shown the succeeded status and my config
enter image description here
I tried removing and re-adding the On Success connector, but yielded no different results.
Based on your flow, it would never proceed ahead:
Because as per your logic to proceed to the Set run time, Web activity 1 AND Web activity 2 should be success but that can never be the case since web activity 2 can be a success only if web activity 1 has failed thereby not proceeding further.
The below blog explains how to handle this :
https://datasharkx.wordpress.com/2021/08/19/error-logging-and-the-art-of-avoiding-redundant-activities-in-azure-data-factory/
Both dependencies of set runtime status cannot end as succeeded. You need to use a combination of skipped/completed states: https://learn.microsoft.com/en-us/azure/data-factory/tutorial-pipeline-failure-error-handling
From the pipeline image , I think it should move on with success .
Can you please cross check what is status code of web activity and is it returning something back ? Is the status code be 2xx ? If I were you could have tried to check with the "Upon Completion" option and see it works .
How to schedule an email newsletter? Documentation seems to missing that. I have newsletter with widget that will take news from last 2 weeks. I would like to automatically send that newsletter every 2 weeks.
Kentico 11
Re-sending newsletters based on some interval (e.g every week) is not supported in Kentico at this time. It is possible through some customization, however.
By scheduling a newsletter to be sent at some time in the future, a scheduled task is created in the Scheduled Tasks application (under your site > System Tasks). This task only runs once and is then deleted, but you can alter the configuration of the task to run periodically and not delete itself. Or, you can manually create a task that uses CMS.Newsletters.QueueSender and TaskData equal to the issue's GUID.
There is another issue to solve once the task has been scheduled to run periodically- the issue's IssueStatus will be changed to Finished (5) after it is sent the first time, but the QueueSender will only re-send the issue if the status is ReadyForSending (1).
You can use an object event handler or custom scheduled task to automatically change the IssueStatus to 1 before the issue is sent once again.
Earlier today, a disabled scheduled agent ran on the indicated server where it would run. Note that the actual agent design element resides in a different server, also, the date where it would run is not specified.
It's function is to send an email to specific users. Upon checking the email, the sender some colleague (but the last modification date of the agent is way back 2014).
I'd like to ask if there's any way that a disabled agent would run without actually enabling it?
Also, is there a way where I can see who triggered the agent? I checked in the "Agent -> Log" but it did not indicated who ran the agent.
I also checked in the log.nsf (where the agent resides) but log is not there. I can't check in the indicated server where the agent ran because it's no longer existing.
Thanks!
There are at least four ways to run an agent that come to my mind, and there for sure are more:
You can run every agent just with a right- click in the designer and then "Run".
You can run an agent with Formula code:
#Command([ToolsRunMacro] ; "NameOfYourAgent" )
#Command([RunAgent] ; "NameOfYourAgent" )
Or with LotusScript- Code:
Set agent = db.GetAgent( "NameOfYourAgent" )
Call agent.Run()
'- or
Call agent.RunOnServer()
You can run it using a server console command:
tell amgr run "path\nameofyourdatabase.nsf" 'NameOfYourAgent'
(double quotes and single quote has to be mixed for this)...
So: just that an agent is disabled does not mean it cannot be run...
I have a scheduled WebJob in Azure that runs nightly. Occasionally, I find that I need to run this job during the day at arbitrary times.
I would like to be able to manually re-run the job when I feel like it. Is this possible? I can see in the portal that the scheduler is set to hit the URL:
https://XXX.scm.azurewebsites.net/api/triggeredjobs/YYY/run
using a POST. I have tried to hit this URL myself. If I do it as a GET, I get a 404, and if I try a POST then I get an authorisation failure:
401 - Unauthorized: Access is denied due to invalid credentials
I could probably construct the necessary headers or whatever to do the auth, but this feels like yak shaving.
This seems (to me) like a trivial use case, and one that surely there's a button for somewhere in the Azure portal or Kudo?
There is authentication required on the request (you should be happy about that :)) This post shows how to form the correct basic auth URL to invoke your job, and also explains how things work behind the scenes which may interest you.
However, you can also run your job from the portal. If you right click in the portal on the job you want to run, you'll see a "Run" context menu item. Not very discoverable I know :(
I'm having a strange problem, where a user event, made to fire for sales orders on the Create event type, is not starting at all for some of them.
Trigger on: BEFORE SUBMIT FUNCTION
STATUS - Released
EVENT TYPE - Create
LOG LEVEL- Error
EXECUTE AS ROLE - Full Access
All access boxes are checked.
The only pattern I've found so far is that all failures are being created by a Script (Scheduled), which makes little sense to me...
Has anyone found a similar issue??
Do you want the scheduled script to trigger the user event script? Do you have the "All Roles" checkbox checked? I believe you need this to be checked for the UE script to be execute when the scheduled script creates a record.
You might want to check your scheduled script if it is error free. One possible reason why the user event script is not running is because the scheduled script has an error. Run your scheduled script first from the script debugger to see if there are errors.