I am working a POC to verify the migration of our Signup & Signup flow to Azure AD B2C. I have successfully called the API authorize to get the access token and id token. Then I tried to call /token to refresh the token according to document , however I got the error message below.
AADB2C90090: The provided JWE is not a valid 5 segment token.\r\nCorrelation ID: ae943eb7-9290-4fd5-aeac-d56411d803c7\r\nTimestamp: 2022-10-26 07:13:40Z\r\n
Following is the url I used to get access token in Browser.
GET https://{tenant}.b2clogin.com/{tenant}.onmicrosoft.com/oauth2/v2.0/authorize?p=B2C_1_signupsignin1&client_id=7adbb5f8-17d2-4dfa-94cd-5ab1cbc9f425&nonce=defaultNonce&redirect_uri=https://jwt.ms&scope=openid offline_access&response_type=code+id_token&prompt=login
Following is the screenshot I used to call token API in Postman.
POST /{tenant}.onmicrosoft.com/B2C_1_signupsignin1/oauth2/v2.0/token HTTP/1.1
Host: {tenant}.b2clogin.com
Content-Type: application/x-www-form-urlencoded
Content-Length: 1971
grant_type=authorization_code&client_id=7adbb5f8-17d2-4dfa-94cd-5ab1cbc9f425&code=eyJraWQiOiJjcGltY29yZV8wOTI1MjAxNSIsInZlciI6IjEuMCIsInppcCI6IkRlZmxhdGUiLCJzZXIiOiIxLjAifQ..n8murSwIYYseViQm.WluJ_gU8aUQd1PPadPik4ODSso4KpKAu8geA5NmAlkbieJPVZb30MJSHGOiUsrxfwu4BoV69bshD7URJeVNFzfqPsCjBhpYDyeL8x0uUZIJwDQ7DTiflw8A4LbYf-SzjluqbfSqDwQFGyQvKesgsrnZzyxg9AnLiL1NoBW27Kd3ZcX3i1BHKr8c--qOyxbz8DtUyIzkJGcOq79wIQZRnDCr1_xPo6EhzOi59TlEIfJhzR4qfgLm3tlgK8zDaUY5Zf3a89olfkmpvrjS84vsfDyyWM4UZe_6MpymNQFe-6Q-fJRmWqdmqdvljaDykP2ZSZJS6jHkdmU9t9aYCTWPB4JgnN1PleQDzRK-MR9WPJ5ULoxmp2VOZ_YFdY94MOGEW8c_IeNGVuPRRC8jXEaQnEWA_3Fs5tzuNe4UjQUxRTTjNeZERb1MHFPk2YGZRc4CshvqvobuGQ2fVNKFHA8JvW9Qt6Xibw0gfY8D0tTZuOP6IxPwhFSWXa5nX4j_lDeFFxhTKA38CALXQ1FVWvHZmzYhB_yMYq44jdG46lpQYB4rV9CFIBvFzJ940EPH6LpOPAnLQzLNm6zqtsVKUoB49dXE2hapIbD5LHsoNoZYeQhu8qJdhxg.8PfqgqgrubNchCs9OxHQQA%26id_token%3DeyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsImtpZCI6Ilg1ZVhrNHh5b2pORnVtMWtsMll0djhkbE5QNC1jNTdkTzZRR1RWQndhTmsifQ.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.RckgULrCBdXzw-7-VYgmB7k0Ghfg1jRMsJF8_1oxLbNXTOcZDe9grbJKcpWoesHp5L5_bVfAa1HQOFzMlmPwPPvM0a2yl1zT8UQzJ_a8W4EHkA4Ao3Xt3osbjoBhRh65Nu4fCVGHswPgxZNAR_N7jr4pR6Pf4PllmKpne-bw7onz_HjpT4ulyyq8jNZye3YokPZh0ha9LaV_19NiwfnVAR451lqfugKs2DWfseXbyGlOnjFCl_UHQDOxa1_ZUTmvF1JUgff2VAOmW2925RMQopzfDjCUEvwZMLr8pKTystErvUR6a8itRAKIFwbfEh3en8PqBun9T89-5qKmmN4NTQ&client_secret=h888Q~Jlg97L2ngl6GHpaKqS6FmkLygeTVY7Eb-h
I tried to search the error message but only get two discussion threads in Stackoverflow, however no useful info found.
https://stackoverflow.com/search?q=AADB2C90090%3A+The+provided+JWE+is+not+a+valid+5+segment+token.
I tried to reproduce the same in my environment and got the same error as below:
To generate the access token, ID token and code in the browser I used the below parameters:
GET https://Tenant.b2clogin.com/Tenant.onmicrosoft.com/B2C_1_testuserflow/oauth2/v2.0/authorize?
client_id=37cd7fca-ea8f-4300-XXXX-XXXXXXXXXX
&response_type=code+id_token
&redirect_uri=https://jwt.ms
&response_mode=fragment
&scope=openid
&state=12345
The error usually occurs if you pass invalid code value. To resolve the error, make sure to copy only the code value not with id token.
I am able to call /token to refresh the token successfully like below:
Related
I am trying to upload document to OneDrive through my application. When i am trying to login Onedrive i am getting below error message.
(1002144-A1) Onedrive upload failed with exception:
Code: Request_ResourceNotFound
Message: Resource 'demo#domain.com' does not exist or one of its queried reference-property objects are not present.
My application is a multitenant application. Can anyone have an idea about this issue.
• You are getting this error because the required scopes and the permissions for the Azure AD app registration are not correct as well as there might be query formatting errors in your ‘Onedrive’ request from your application. For that purpose, kindly ensure the below settings are configured aptly in your application: -
a) Client ID and Key (client secret) as registered with Azure Active Directory (AAD)
b) Authorization code received from OAuth 2 authorization code flow
c) OneDrive for Business API endpoint URL
d) Access token for the OneDrive for Business resource
e) Refresh token to generate additional access tokens when the current token expires.
Thus, follow the steps as shown in the manner as above. Kindly get an authorization code as below: -
GET https://login.microsoftonline.com/common/oauth2/v2.0/authorize?client_id={client_id}&scope={scope}&response_type=code&redirect_uri={redirect_uri}
Then ensure to redeem the code for access tokens as below upon successful authentication and authorization wherein the response will be as below: -
Response: -
https://myapp.com/auth-redirect?code=df6aa589-1080-b241-b410-c4dff65dbf7c
Redeem the code for access tokens as below: -
POST https://login.microsoftonline.com/common/oauth2/v2.0/token
Content-Type: application/x-www-form-urlencoded
client_id={client_id}&redirect_uri={redirect_uri}&client_secret={client_secret}
&code={code}&grant_type=authorization_code
Then, further get a new access token or refresh token as below wherein the response should be as follows: -
Refresh token redemption: -
POST https://login.microsoftonline.com/common/oauth2/v2.0/token
Content-Type: application/x-www-form-urlencoded
client_id={client_id}&redirect_uri={redirect_uri}&client_secret={client_secret}
&refresh_token={refresh_token}&grant_type=refresh_token
Response: -
{
"token_type":"bearer",
"expires_in": 3600,
"scope": "wl.basic onedrive.readwrite wl.offline_access",
"access_token":"EwCo...AA==",
"refresh_token":"eyJh...9323"
}
As you can see above, upon successful authentication via Microsoft Graph as the orchestrator, you get the refresh token, access token and the valid scopes for it too. Also, please find the below snapshot which shows the scopes required for this: -
Also, do ensure that the application as an entity exists in the Azure AD app registration for the authentication to Onedrive API to happen as below: -
For more detailed information, kindly refer the below links: -
https://learn.microsoft.com/en-us/onedrive/developer/rest-api/getting-started/graph-oauth?view=odsp-graph-online
https://github.com/microsoftgraph/microsoft-graph-docs/issues/3539
I authenticate using OAuth 2.0 authorization code workflow successfully and get redirected back to Postman. Here is more information on the Azure DevOps REST API I am trying to do.
In the console, I get an error: request URL is empty
I do not see the authorization code in the response for me to parse, but if I expand the error message and look in the Request Body > code, my authorization code is there!
I am able to use the authorization code to successfully obtain an Access Token as well.
Steps to reproduce error:
I set all of the values in the OAuth 2.0 form
I click Get New Access Token
I get redirected to my browser to accept
I get a successful authentication & get redirected back to Postman
I get the Authorization code in the request body of a console error (I also get the auth code in the URL after authenticating)
On step #5, I expect to get redirected back to Postman successfully with the authorization code in the body of the message.
EDIT: The solution below works for the Azure API with a scope of https://graph.microsoft.com. If the scope is https://app.vssps.visualstudio.com (which is what I'm using), the solution will not work oddly enough.
Please try my steps to get access token with OAuth 2.0 in Postman.
POST https://login.microsoftonline.com/{tenant}/oauth2/v2.0/token
Callback URL: the Redirect URI in Application > Authentication. It is required. Don't select Authorize using browser.
Auth URL: https://login.microsoftonline.com/{tenant}/oauth2/v2.0/authorize
Access Token URL: https://login.microsoftonline.com/{tenant}/oauth2/v2.0/token
For more information, you could refer to the blog which uses oauth2 v1.0.
From last couple of weeks we have few clients complaining that our app is auto revoking Office365 oauth every 1 hour. This is the typical behiviour as access token have validity of 1 hour, so our app is designed to auto refresh the access token using refresh token captured during oauth.
This seems to be not working for atleast few customers from last few weeks. Below exception is thrown back by Office365 token api - https://login.windows.net/common/oauth2/token
{"error":"invalid_grant","error_description":"AADSTS9002313: Invalid request. Request is malformed or invalid.\r\nTrace ID: 7f80c2c3-41bc-41bd-8304-b56969c83a00\r\nCorrelation ID: 5a08714a-1e7d-4f32-814d-146bc721e8ab\r\nTimestamp: 2020-10-12 05:42:11Z","error_codes":[9002313],"timestamp":"2020-10-12 05:42:11Z","trace_id":"7f80c2c3-41bc-41bd-8304-b56969c83a00","correlation_id":"5a08714a-1e7d-4f32-814d-146bc721e8ab","error_uri":"https://login.windows.net/error?code=9002313"}
Here, the error code '9002313' states there is some issue related to auth parameters especially 'client_id' of our azure app. (reference)
Below data is sent to fetch new access token
client_id (related to azure app)
client_secret (related to azure app)
grant_type = 'refresh_token'
refresh_token
Edit 1: Update token endpoint to v2.0
Request URI
POST https://login.microsoftonline.com/common/oauth2/v2.0/token
Request Body
client_id=<client-id> &scope=https://outlook.office365.com/Calendars.ReadWrite https://outlook.office365.com/Contacts.ReadWrite https://outlook.office365.com/Mail.ReadWrite &refresh_token=OAAABAAAAiL9Kn2Z27UubvWFPbm0gLWQJVzCTE9UkP3pSx1aXxUjq... &grant_type=refresh_token &client_secret=<client-secret>
Reponse Body
{"error":"invalid_grant","error_description":"AADSTS9002313: Invalid request. Request is malformed or invalid.\r\nTrace ID: 4447c69e-09d6-4a00-8dfe-735106d71200\r\nCorrelation ID: 1820e135-a511-4516-99d9-b6cebb342eb2\r\nTimestamp: 2020-10-13 03:39:37Z","error_codes":[9002313],"timestamp":"2020-10-13 03:39:37Z","trace_id":"4447c69e-09d6-4a00-8dfe-735106d71200","correlation_id":"1820e135-a511-4516-99d9-b6cebb342eb2","error_uri":"https://login.microsoftonline.com/error?code=9002313"}
Your authority is old and you missed the scope in the request body(if use the v2.0 endpoint), if you want to get a new access token for O365 with the refresh token, use the sample request below.
Request url:
POST https://login.microsoftonline.com/common/oauth2/v2.0/token
Request body:
client_id=<client-id>
&scope=https://outlook.office365.com/.default
&refresh_token=OAAABAAAAiL9Kn2Z27UubvWFPbm0gLWQJVzCTE9UkP3pSx1aXxUjq...
&grant_type=refresh_token
&client_secret=<client-secret>
For more details, refer to the doc - Refresh the access token.
Update:
I test it for you, it works on my side. Make sure you also get the refresh token with the v2.0 endpoint, see here.
The permissions for my app:
Test to get a new access token in the postman after getting the refresh token.
Whenever i connect Azure platform from my platform & access for Authorization getting an error like the following
Authorization failed with the error message, 'AADSTS900144: The
request body must contain the following parameter: 'code'. Trace ID:
0c2a6ce5-a127-491f-8ef5-34b4b0f11a00 Correlation ID:
5ae207ac-ff51-43da-92a6-0225372c55b1 Timestamp: 2020-10-06 11:19:33Z'
Similarly faced scope value exception.Refered the link AADSTS900144: The request body must contain the following parameter: 'scope' when using legacy Developer Portal
Now, How to fetch the code value Azure platform?
Code will be provided in the response of the authorization request. Once obtained you will include it in the token request as detailed in Request an access token.
According to your error message, you are missing request parameters when requesting an access token. You need to put the following parameters in the request body：
For code, it needs to be acquired by interactive login users, you need to execute the following request in the browser to acquire it：
https://login.microsoftonline.com/{tenant}/oauth2/v2.0/authorize?
client_id=6731de76-14a6-49ae-97bc-6eba6914391e
&response_type=code
&redirect_uri=http%3A%2F%2Flocalhost%2Fmyapp%2F
&response_mode=query
&scope=openid%20offline_access%20https%3A%2F%2Fgraph.microsoft.com%2Fmail.read
&state=12345
I'm trying to call the outlook API with the following request:
https://outlook.office.com/api/v2.0/me/calendars
GET
Authorization: Bearer [my fresh bearer token]
I successfully retrieved an access_token from the token endpoint after the login and user consent.
However, every request I try returns 401 Unauthorized with the following header (showing that one cause it looks weird to me):
WwwAuthenticate [HttpHeaderValueCollection]: {Bearer client_id="00000002-0000-0ff1-ce00-000000000000", trusted_issuers="00000001-0000-0000-c000-000000000000#*", token_types="app_asserted_user_v1 service_asserted_app_v1", authorization_uri="https://login.windows.net/common/oauth2/authorize", error="invalid_token", Basic Realm="", Basic Realm="", Basic Realm=""}
As you can see, at the end there is error="invalid_token"
Also, there is app_asserted_user_v1 service_asserted_app_v1
Is there something I forgot to activate or configure properly?
EDIT: I did found this post but if I add a resource parameter like the OP, I get "Bad Request" and this code:
AADSTS90100: The 'resource' request parameter is not supported.
All right I found the answer myself and I hope it will help more people:
The problem was even before, at the step I was redirecting the user to the MS Login page.
At that point I used to give it the following scopes:
openid Calendars.ReadWrite offline_access profile
BUT, the Calendars.ReadWrite MUST but passed with its "full" name, being:
https://outlook.office.com/Calendars.ReadWrite
HTH