i have problem in inputs rules in salary rules
i write python code
result =inputs.LOAN.amount
but it's not work
see the screenshot
any one can resolve it
Related
I have modified some VB sample code to get most of what I need done using the QuickBooks SDK in an app launched from Excel using VBA. I am able to produce both a Time by Job Summary report and a Job Estimates vs. Actuals report, but for the latter I need to produce filtered copies of it for each customer:job reference number, and I'm not sure what the proper syntax is for this even after looking over the specific query in the API Reference for QB Desktop.
I'm fairly sure that this needs to be done during the request phase. Also, I'm using QBFC, so I have tried various combinations that seem logical, but still haven't received the desired output. If it helps, an example of what is needed for the filter would be like: 20-5050 Dan Barton Trucks. Below is my code for the request:
Set jobRQ = requestSet.AppendJobReportQueryRq
customerRef = "20-5050 Dan Barton Trucks"
With jobRQ
.JobReportType.SetValue ENJobReportType.jrtJobEstimatesVsActualsSummary
.ReportEntityFilter.ORReportEntityFilter.EntityTypeFilter.SetValue etfCustomer
' .ReportEntityFilter.ORReportEntityFilter.FullNameList.Add (customerRefID)
.ORReportPeriod.ReportPeriod.FromReportDate.SetValue dateFrom
.ORReportPeriod.ReportPeriod.ToReportDate.SetValue dateTo
.SummarizeColumnsBy.SetValue scbTotalOnly
.IncludeSubcolumns.SetValue True
.DisplayReport.SetValue True
End With
I have commented out the line that doesn't work.
I am teaching a man the basics of QGis for a project he needs to do at his work. He has very little computer knowledge and would like to standardise the work as much as possible (specific workarounds would complicate it too much for him). His QGis version is 3.16 "Hannover" and as this is a work laptop he does not have permission to download a newer version.
We have been having problem with one specific table. The first few rows are below, written exactly as they are originally.
Baum-Nr. Baumart BHD Alter Y X Biotopbaum Klassifizierung Bemerkungen
1 Buche 86 120 49.1356 11.0488 A Altbaum Freistellen !!!
2 Kiefer 45 100 49.13561 11.04883 Hlb,Bs,Th Höhlenbaum
3 Kiefer 32 100 49.13571 11.04579 Hlb,Sw,Th Höhlenbaum
4 Kiefer 74 120 49.13513 11.0495 A Altbaum
After adding it from Excel to QGis through "add vector layer", the header "Klassifizierung" becomes one of the coordinates and I believe one of the columns are switched (unfortunately, I can't remember specifics. This is a small side job and I haven't had time to look into it for days. I should have taken a photo, but this isn't possible anymore). We have attempted to copy the column into a new Excel document and transferring it to QGis again, and this time the headers were shoved one cell to the right such that "Y" was placed over "X" and "Biotopbaum" over "Klassifizierung", for example.
I could not find a way to fix the import problem in his laptop. He e-mailed me the problematic table and I opened it successfully in my QGis 3.26 "Buenos Aires".
I believe this may be a problem with his QGis version, but it is curious that we only encountered it with this one table. All other tables we have worked with have the same headers and the same kind of data on their respective rows.
Is this a known problem, or have other people faced similar situations? Could someone explain what could be causing it? Would there be a way to fix it such that we can successfully import the table without having to edit it in QGis? This is not a solution the man would accept.
Thank you in advance.
Remove the commas in the Biotopbaum field or replace them with a less common delimiter. In fact, remove all punctionation (e.g., Baum-Nr. >> remove the period ".").
Also save the table into a csv format and try to import.
So I have a google sheet dataset. Great! Using filter() to run a few reports off of it. No problem.
The issue is, the end-users want to be able to put comments into the reports that have been run off, and have the main dataset update based on these comments. Additionally, as things change, the data in the reports move around. They'd like the comments they make to move around with them.
So what I initially did was created a "Comment database", which checked every report and the main dataset for comments, and pulled them in. Works like a charm.
I also included a OR(Not(Now()="Dummy") clause to the comment database aggregation to force recalculation every time a change was made.
I then enabled iterative calculations (Tried at 1, 2, and 3 iterations), and had everything be an index-match back to the comments, with the idea being that if someone entered a new comment, it would update the dataset, which would then update the main report once they dragged the formula back over.
In Excel, this would work perfectly - the iterative calculation would "store" the comment value, and it would continue to cycle through.
However, in Google sheets, this isn't working.
I've asked if the obvious solution of "Just update the main dataset whenever you want to change something" would work. For reasons unknown, the answer is no.
How can I get what I want? I'm open to using google scripts if necessary, although I'm not too familiar with the language.
As an example:
Dataset:
ID: 123
Comment: None
Report:
ID: 123
Comment: "Hello World"
Becomes:
Dataset:
ID:123
Comment:"Hello World"
Report:
ID:123
Comment:"Hello World"
The comment has moved from the report to the dataset
Then once we add ID 456:
Dataset:
ID: 123
Comment: "Hello World"
ID: 456
Comment: None
Report:
ID: 456
Comment: None
ID: 123
Comment: "Hello World"
The comment has moved down with the ID it's associated with
So it turns out I had a bad conditional statement, and fixing it fixed the problem.
This type of system will work as a two-way street for information, it's just silly convoluted.
looking for help on what should be a very basic function. I am trying to get a SUM of a specific value, however I do not seem to get the syntax correct.
Here is what I have
=Sum(Fields!PriorYearSalesDollars.Value - Sum(Fields!PriorYearCost.Value
+Sum(Fields!PriorYearFrtCost.Value)))
However I get an error when trying to sum. Is there another way to test this also? Each time I modify the expression I then have to save the report and upload to the report server and test again. If I do it through the preview function in visual studio it throws a generic error on the whole report. When running from report server, just this specific column shows #Error
This is the syntax that works after FIRST changing the column format to numbers where I accidentally did it as currency first. Not sure why currency didn't work, but this is correct.
=Sum(Fields!PriorYearSalesDollars.Value) - (Sum(Fields!PriorYearCost.Value) + Sum(Fields!PriorYearFrtCost.Value))
Hello I am attempting to link data that is connected to a task on a project report using the text editor.
So far I have this as my code:
displayname=Recvd Medical Rates
linkedname=project:tasks
namekey=DE:Documentation Received Date
querysort=project:tasks:Document - Medical Rates:Documentation Received Date
textmode=true
valuefield=Documentation Received Date
valueformat=customDateAsString
I need to display data from a specific task within a specific custom form on a project report. I know there is no standard method of linking a project with a task, but the relationship is there and from my research It seems possible. I believe that I do not have the correct syntax.
Can somebody please help me with this. I have tried all types of combinations, I even tried adding the aggregator:
aggregator.displayformat=customDateAsString
aggregator.function=MIN
aggregator.namekey=Documentation Received Date
aggregator.valuefield=DE:Documentation Received Date
aggregator.valueformat=customDateAsAtDate
Either way I try and link the information the actual entered data will not display. So far the report knows that it is a date field; I know this because I am able click into the field on the project report and choose a date, but the date will not remain selected once I have chosen it leading me to believe that the field is somehow linked, but done incorrectly.
Please help.
The answer is below:
displayname=Plans and Benefits Received
listdelimiter=
listmethod=nested(tasks).lists
textmode=true
type=iterate
valueexpression=IF(CONTAINS("Plans and Benefits",{name}),{actualCompletionDate})
valueformat=HTML
So how does it work? see below.
displayname=Plans and Benefits Received
^display name that you want^
listdelimiter=
^decides delimiter^
listmethod=nested(tasks).lists
^Calls the nested or sub task^
textmode=true
^allows text editor mode to function^
type=iterate
^make data display as an iteration of original^
valueexpression=IF(CONTAINS("Plans and Benefits",{name}),{actualCompletionDate})
^determines where the data is being pulled from^
valueformat=HTML
^Format set to HTML^