In Databricks SQL editor , I am trying to get the SUM of few 'Bigint' and 'Double' data type columns of a table. But am getting below error.
Job aborted due to stage failure: Task 0 in stage 29.0 failed 4 times, most recent
failure: Lost task 0.3 in stage 29.0 (TID 2517) (10.128.2.66 executor 3):
org.apache.spark.SparkArithmeticException: [ARITHMETIC_OVERFLOW] long overflow. If
necessary set ansi_mode to "false" to bypass this error.
How to set ansi_mode from Databricks SQL editor?
I tried below in SQL editor
SET spark.sql.ansi.enabled = false
Getting below error
Error running query: org.apache.spark.sql.AnalysisException: Configuration
spark.sql.ansi.enabled is not available.
How to resolve this Arithmetic overflow error in Databricks?
It should be just:
set ansi_mode = false;
See documentation for supported configurations, and examples for set command.
Related
I am trying to drop a table before reading in a new set of values for testing purposes. When I run the command
DROP TABLE [dbo].[Table1]
I get the following error after about 3-5 minutes. It is a large table (~50 million rows).
Failed to execute query. Error: A severe error occurred on the current command. The results, if any, should be discarded.
Operation cancelled by user.
Failed to execute query. Error: A severe error occurred on the current command. The results, if any, should be discarded. Operation cancelled by user. what is the cause?
The error can cause for many different reasons, but it is not showing exact reason to find exact reason you can check following things:
It might be because of indexing issue to get that check the consistency of the database should be checked first
DBCC CHECKDB(``'database_name'``);
Check table consistency if you have it nailed down to a table.
DBCC CHECKTABLE(``'table_name'``);
When the problem was reported, search for any files with the name SQLDump* in the LOG folder, which contains ERRORLOG or You can try following actions in SSMS:
Object Explorer >> Management Node >> SQL Server Logs >> View the current log
I ran the example in delta doc:
SELECT * FROM delta.`/delta/events` VERSION AS OF 1
But got the following error:
mismatched input ‘AS’ expecting {<EOF>, ‘;’}(line 3, pos 44)
Does anyone know what is the correct syntax ?
Spark version: 3.1.2
Delta version: 1.0.0
Configure spark as follows:
spark.sql.extensions io.delta.sql.DeltaSparkSessionExtension
spark.sql.catalog.spark_catalog org.apache.spark.sql.delta.catalog.DeltaCatalog
This syntax is not supported in the open source version right now as it requires changes in Spark to support that syntax (the required changes are committed already). Specifically, this is a bug in the documentation that was copied from the Databricks Delta documentation. The issue with documentation will be fixed in the next major release - it was already reported.
I am new to Apache Kudu, I installed it on my Ubuntu system and later created a table in it using Apache Spark shell. Now I am trying to insert data into that table using insertRows() for that I am using the but below given command,
kuduContext.insertRows(customersDF, "spark_kudu_tbl")
Where customersDF is a Data Frame and spark_kudu_tbl is a table in the Kudu data base. I am getting below error,
java.lang.NoSuchMethodError: org.apache.kudu.spark.kudu.KuduContext.insertRows(Lorg/apache/spark/sql/Dataset;Ljava/lang/String;)V
... 70 elided
I have tried different options but no one is giving results to me. Can any one give any solution for my question.
From the error message it appears as though you are using wrong kudu-spark artifact, you should use kudu-spark2_2. please start your spark-shell as below (replace the last bit with your kudu version)
spark-shell --packages org.apache.kudu:kudu-spark2_2.11:1.3.0
I have a setup with Titan 0.5.2 running with Rexster. When I use the rexster console to run some code on the Titan side and exception happens, I get only short message like:
==>An error occurred while processing the script for language [groovy]. All transactions across all graphs in the session have
been concluded with failure: java.util.concurrent.ExecutionException:
javax.script.ScriptException: javax.script.ScriptException:
groovy.lang.MissingPropertyException: No such property: a for class:
Script8
And no output from the script (that is produced with println or such) is visible. Is it possible to make the rexster console produce the exception backtraces (e.g. like Titan's gremlin console does) and see the output from the script?
You can't get much more out of Rexster Console. If you look at server logs for Rexster though, you should see a bit more output. Of course, I wouldn't expect the trace to tell you too much more in the specific case of a "No such property" type of error.
Hi im developping an ssis package that imports excel files (.xlsx) from an ftp server to a local folder then they are imported to a sql server table . I'm using a foreach mapping to the name of files. The import from the ftp server to local work fine, but the import from the local folder to the sql table failed.
It seems that I have a problem in excel source. These are the errors:
Start SSIS package "Package.dtsx."
Information: 0x1 at Script Task, C # My Message: System.Collections.ArrayList
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase begins.
Error: 0xC0202009 at Data Flow Task, Excel Source [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
Error: 0xC02020E8 to Flow Task data, Excel Source [1]: Failed to open a rowset for "Sheet1 $". Verify that the object exists in the database.
Error: 0xC004706B to Flow Task data SSIS.Pipeline: validation failed "component" Excel Source "(1)". Returned validation status "VS_ISBROKEN."
Error: 0xC004700C to Flow Task data SSIS.Pipeline: Failed to validate one or more components.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
Warning: 0x80019002 at Foreach Loop Container: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors (6) reached the maximum allowed (1); leading to a failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the value of MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Success.
The program '[5504] Package.dtsx: DTS' has exited with code 0 (0x0).
As configuration I have:
For the excel manager connexion, I made an expression for connectionString = #[User::variable1] + #[User::DOWNLOAD_DIRECTORY_LOCAL] + #[User::FTP_FILE_URL] + #[User::variable2]
variable 1 =Provider=Microsoft.ACE.OLEDB.12.0;Data Source=
variable 2 = ;Extended Properties="EXCEL 12.0;HDR=YES";
I made also the delay validation property to true for data flow task, ftp task, foreach task and excel connection.
I just wrote a package to do the very same thing myself. Things to check in this order:
in your Excel Data Connection have you browsed to the excel files in your local folder (once they are there) and selected one (you need to copy one in there while developing)? so when you go to your excel source object inside your Data Flow Task (inside the For Each) you can select the Excel Data Connection and then see Sheet$1 under "name of the excel sheet"?
Once you are sure you have done above have you then right-clicked on the Excel Data Connection and in the Expressions property added ExcelFilePath = #[User::FTP_FILE_URL]? (note you need to select 'Fully Qualified' under Retrieve File Name on the Collection tab of the For Each container)
in your Excel Data Connection have you selected the right version (Excel 2007) for the .xlsx files or Excel 2003 for .xls? I noticed a small bug where when I changed the filename it defaulted back to 2007, I had to manually change it back (again) to 2003.
Check at least one workbook exists in the folder before the step runs. There is some code around here about how to add a script task to validate at least one file being in User::DOWNLOAD_DIRECTORY_LOCAL.
I got a load of errors about the driver for Microsoft.ACE.OLEDB.12.0, plus had issues with a 64-bit server and had to wrap the package in a job and check the 'use 32-bit runtime' option under execution options in the job properties. Check the driver is working OK (although it usually gives a specific driver error if you haven't got it set up right).
Um that's it offhand just quickly before I head home. Let me know if it works or is still a fail..
The question you should ask yourself when having this issue is:
Where do I run my dstx file from ?
Is it from Microsoft Visual Studio ?
Is it from a SQL Agent ?
Is it from the Integration Services Package Execution Utiliy ?
Then refine your question to find the answer on the forums.