I have an RDS instance running Postgres 11.16. I'm trying to upgrade it to 12.11 but it's giving me errors on PostGIS. If I try a "modify" I get the following error in the precheck log file:
Upgrade could not be run on Sun Sep 18 06:05:13 2022
The instance could not be upgraded from 11.16.R1 to 12.11.R1 because of following reasons. Please take appropriate action on databases that have usages incompatible with requested major engine version upgrade and try again.
Following usages in database 'XXXXX' need to be corrected before upgrade:
-- The instance could not be upgraded because there are one or more databases with an older version of PostGIS extension or its dependent extensions (address_standardizer, address_standardizer_data_us, postgis_tiger_geocoder, postgis_topology, postgis_raster) installed. Please upgrade all installations of PostGIS and drop its dependent extensions and try again.
----------------------- END OF LOG ----------------------
First, I tried just removing postgis to upgrade then add it back again. I used: drop extension postgis cascade;. However, this generated the same error
Second, I tried running SELECT postgis_extensions_upgrade();. However, it gives me the following error:
NOTICE: Updating extension postgis_raster from unpackaged to 3.1.5
ERROR: function st_convexhull(raster) does not exist
CONTEXT: SQL statement "ALTER EXTENSION postgis_raster UPDATE TO "3.1.5";"
PL/pgSQL function postgis_extensions_upgrade() line 82 at EXECUTE
SQL state: 42883
Third, I tried to do a manual snapshot and upgrade the snapshot. Same results.
One additional piece of information, I ran SELECT PostGIS_Full_Version(); and this is what it returns:
"POSTGIS=""3.1.5 c60e4e3"" [EXTENSION] PGSQL=""110"" GEOS=""3.7.3-CAPI-1.11.3 b50468f"" PROJ=""Rel. 5.2.0, September 15th, 2018"" GDAL=""GDAL 2.3.1, released 2018/06/22"" LIBXML=""2.9.1"" LIBJSON=""0.12.1"" LIBPROTOBUF=""1.3.0"" WAGYU=""0.5.0 (Internal)"" TOPOLOGY RASTER (raster lib from ""2.4.5 r16765"" need upgrade) (raster procs from ""2.4.4 r16526"" need upgrade)"
As you'll notice, the raster lib is old but I can't really figure out how to upgrade it. I think this is what is causing me problems but I don't know how to overcome it.
I appreciate any thoughts.
I ended up finally giving up on this after many failed attempts. I ended up solving this by:
Spinning up a new instance on the desired postgres version
Using pg_dump on the old version (schema and data)
Using pg_restore on the new version
I'm not sure if I did something wrong with the above but I found my sequences were out of sync on a number of tables. I wrote some scripts to reset the sequence values after doing this. I had to use something like this to re-sync those sequences:
SELECT setval('the_sequence', (SELECT MAX(the_primary_key) FROM the_table)+1);
I wasted enough time and this got me past the issue. Hopefully the next upgrade doesn't give me this much trouble.
Related
I have followed all the steps given in this Tutorial but the search feature for my project is not working. Whereas the example project given by django-machina is working fine with search. So can someone tell me what is the missing thing. I have also rebuild and updated the index. But still my search is not giving any results. It is always 0 results with no error.
When i run the rebuild index command i get the following error
python3 manage.py rebuild_index
/usr/local/lib/python3.8/site-packages/jose/backends/cryptography_backend.py:18: CryptographyDeprecationWarning: int_from_bytes is deprecated, use int.from_bytes instead
from cryptography.utils import int_from_bytes, int_to_bytes
WARNING: This will irreparably remove EVERYTHING from your search index in connection 'default'.
Your choices after this are to restore from backups or rebuild via the `rebuild_index` command.
Are you sure you wish to continue? [y/N] y
Removing all documents from your index because you said so.
/usr/local/lib/python3.8/site-packages/haystack/backends/simple_backend.py:31 UserWarning: clear is not implemented in this backend
All documents removed.
Indexing 13 Posts
/usr/local/lib/python3.8/site-packages/haystack/backends/simple_backend.py:25 UserWarning: update is not implemented in this backend
You can find the solution here. After adding settings please do python3 manage.py update_index
or you can do it by code
from django.core import management
management.call_command('update_index')
I want to push data into an already existing table, single column family, no records.
I am using shc-core:1.1.1-2.1-s_2.11 on a windows machine. I have hbase 1.2.6 installed and use scala 2.11.8.
When I try to push data I got first the following error: org.apache.spark.sql.execution.datasources.hbase.InvalidRegionNumberException: Number of regions specified for new table must be greater than 3.
After following the advice of this link https://github.com/hortonworks-spark/shc/issues/249#issue-318285217, I added: HBaseTableCatalog.newTable -> "5" to my options.
It still failed but with: java.lang.IllegalArgumentException: Can not create a Path from a null string.
Following this link: https://github.com/hortonworks-spark/shc/issues/151#issuecomment-313800739, I added to my catalog: , "tableCoder":"PrimitiveType".
Still facing the same error.
I saw people are expecting some clarification about this issue (https://github.com/hortonworks-spark/shc/issues/249#issuecomment-463528032).
It is known issue and apparently it seems fixed (https://github.com/hortonworks-spark/shc/issues/155#issuecomment-315236736).
I do not know what to do next.
Is there a solution about this?
enter image description hereWhy does the fuction Utf8Helper::setCollatorLanguage in arangodb sdk always return false?
It is at fault ERROR ERROR in the Collator: : createInstance < > : U_FILE_ACCESS_ERRORï¼›And It's lead to failed to initialise ICU; ICU_DATA= "F:\\work_lc\\arangodb-2.6\\Build32\\bin\\..\\\\share\\arangodb\\";This project where to copy from others, it can be used, but i'm not,I just wonder what configuration file not produced
You need to make shure, ICU is able to load its locale database.
See our cookbook regarding windows compilation how to achieve this.
Please note that ArangoDB 2.6 is way out of date, and you should work with a more recent version.
More recent versions will also provide better error messages in such situations via the windows event log.
I've been trying for hours, but can't build and use Light Table. Every time I try to run deploy/LightTable, it hangs on a screen that simply says "Light Table". I receive this error*:
[14381:0519/204037:INFO:CONSOLE(27860)] "Uncaught TypeError: Cannot read property 'thread_STAR_' of undefined", source: file:///home/zaz/Desktop/LightTable/builds/lighttable-0.8.0-linux/resources/app/core/node_modules/lighttable/bootstrap.js (27860)
Here's what I've tried:
git clone https://github.com/LightTable/LightTable.git
cd LightTable
bash linux_deps.sh
./deploy/LightTable # creates frozen window, throws the error above
cd deploy
./LightTable # creates frozen window, throws the error above
./ltbin # creates frozen window, throws the error above
I also tried similar things after checking out the atom-shell branch and the 0.7.2 tag (and cleaning up all the files from the previous build). Each time, I received the error above.
Does anyone know what's going on here?
Has Light Table been completely abandoned? It seems the last commit was in March.
* Depending on the version I was trying to run, I also received other errors, but I don't think they're relevant (the error above was the only one that appeared for all versions):
[18593:0519/222845:INFO:gpu_info_collector_x11.cc(80)] NVCtrl extension does not exist.
[18593:0519/222845:ERROR:browser_main_loop.cc(226)] Gdk: gdk_window_set_icon_list: icons too large
Fontconfig warning: FcPattern object size does not accept value 11(i)
[14413:0519/204035:INFO:renderer_main.cc(212)] Renderer process started
A year later (question was written in May 2015, now is June 2016), LightTable 0.8.1 is out, and I tried both Linux binary and cloned it from git, and it works fine.
For complete info, I'm using also Atom, and although I had not problems with "Cannot read property 'something' of undefined"" in Atom core, I met such problems in two or three Atom packages.
Both editors are based on same electron platform, LightTable is beautiful eye candy with quite revolutionary REPL integration, but it needs more polish to be usable to same extent as Atom.
For example, LightTable does not have workspace saving by default, that is done via plugin. That's ridiculous.
But although Atom looks so nice and powerful compared to simple editors, with realy huuuge number of available packages/plugins, LightTable is more elegant.
As I don't want to start new semi-religious war Atom vs LightTable resembling vi-vs-emacs, I'll stop here. :)
I can't replicate your problems in LightTable v0.8.1, so I think that answers this question. If not, please add errors you get with v0.8.1.
For info about releases, please check: https://github.com/LightTable/LightTable/releases
Setup:I am using Python 3.3 on a Windows 2012 client.
I have a select query running using pyodbc which is not returning any results via fetchall(). I know the query works fine because i can take it out and run it from Microsoft SQL Management Studio without any issues.
I can also remove one column from the select list and the query will return results. For the database row in question, this column contains a large amount of XML data (> 10,000 characters), so it seems as though there is some buffer overflow issue going on causing fetchall() to fail, though it doesn't throw any exceptions. I have tried googling around and i have seen rumors of a config option to raise the buffer size, but i haven't been able to nail down exactly how to do it, or what a workaround would be.
Is there a configuration option that I can use, or any alternative to pyodbc.
Disclaimer: I have only been using python for about 2 weeks now so i
am still quite the noob, though i have made every attempt to research
my problems thoroughly this one has proven to be elusive:
On a side note, i tried using odbc instead of pyodbc but the same query throws this oddball error which google isn't helping me solve either
[ERROR] An exception while executing the Select query: [][Negative size passed to PyBytes_FromStringAndSize]
It seems this issue was resolved by changing my SQL connection string
FROM:
DRIVER={SQL Server Native Client 11.0}
TO:
DRIVER={SQL Server}