I have a BLE module that i'm trying to update the firmware in, but having a lot of problems connecting the recommended update software (ISupdater). All I get is 'connect failed' message. There seems to be no troubleshooting information available, so I hope that someone has run into the same issues and solved it.
For the hardware setup, I'm connecting to a PC via a USB-USART serial adapter board. I have the 3.3V, GND, reset switch, mode switch, USART connection from the RN4870 BLE module connected as per the microchip connection diagrams (https://microchipdeveloper.com/ble:rn4870-app-example-fw-upgrade). I have verified many many many times that my connections are correct.
Connection Diagram
To test the BLE connection and data transfer I have mobile devices (iOS and Android) with the recommended apps (SmartData, mBIoT). I can see the BLE broadcast in the bluetooth lists, and I can connect to it to use the apps.
For the RN4870 module, I'm able to connect to CoolTerm software to test that I'm getting communication between the terminal and a mobile device. I'm able to send and receive data on the CoolTerm terminal, and on the mobile device apps, so that suggests to me that the USART adaptor is working correctly, and so is the BLE module.
In CoolTerm, I'm able to enter the CMD mode for the RN4870 module to set and read settings of the module, so I can check and set the baudrate to the default 115200.
If I use a BM70 module (which is the same hardware as RN4870 but different firmware), i can't enter any CMD mode, or do any sort of reset. The data is still able to be sent and received, so that confirms the baud rate is correct.
When I attempt to connect to either BLE module using the ISUpdate software that is recommended in the update steps to use as the firmware updater, I'm not able to connect to the module to update the firmware. I've tried many times to get the software to connect, many different ways, without success, and it's frustrating to no end.
I've updated the MCP2200 drivers to the latest ones from the microchip website, as well as using the latest versions of the CoolTerm and ISupdater. I've also tried previous versions, but still they all have 'connect failed'
ISupdater Image
has anyone got any solutions to the issue?
PC: Windows 10, 64-bit
BLE Modules: RN4870, BM70
CoolTerm Version: v1.8.0 (build 861)
ISUpdater Version: v4.0.0.207
IS187x_102_BLEDK3v1.11_UIv1.01 for Windows 10
Mobile Apps: SmartData, LightBlue for iOS, LightBlue for Android, mBIoT
Hmm, well it turns out that the USB-USART serial adaptor (although confirmed to be working correctly) seemed to be the problem.
At first, I only had the 1 adaptor, and I had to borrow a different adaptor. After swapping this FTDI232 USB-USART Serial adaptor, the connection was made first try, and I was able to update the firmware. I have now purchased a new adaptor.
So, if you are having the same trouble, try using a different adaptor.
Related
Since upgrading to macOS Monterey, we have been unable to create a Bluetooth SPP connection to any hardware device.
The SPP service does not appear to be supported. When listing the services for the device, the SPP service is not listed at all, as it was in previous OS versions.
SPP Connection to the device is blocked by the operating system (except in extreme cases where we open a socket connection while the device is still connecting to other Bluetooth services)
We are using a headphone-type device that successfully pairs and connects to the computer with A2DP, HFP and a few other standard services. However, it is unable to connect to SPP service, which was previously available up until Big Sur. Has anyone else faced a similar issue -- and are there currently workarounds to establish a stable Bluetooth SPP connection on macOS Monterey?
After communications with Apple support, the issue has been resolved as of Monterey 12.3 Beta 4.
1 - RFCOMM handles are now properly returned.
2 - IOBluetooth.recentDevices() still does not return devices, which was part of the problem described above, but can be circumvented by leveraging IOBluetooth.pairedDevices() instead.
I'm trying to establish a connection between my PC running Ubuntu and my iPhone via Bluetooth automatically when it becomes available, after being manually paired beforehand. I've seen this to be possible with certain peripherals, mainly audio. For example, my phone will automatically connect to a Bluetooth speaker when it is turned on and Bluetooth is active on my phone; another example is my phone automatically connects to my car's radio system via Bluetooth when I turn the car on.
I'm not able to connect my phone to my PC without first initiating the connection from the smartphone's Bluetooth menu. I'm thinking that I could possibly write an application for the PC to attempt to connect to the device every few minutes or something, but it seems that the phone needs to be the device to initiate the connection.
The only information that I need for what I'm trying to do ultimately is that the devices can pair successfully. Essentially I'm trying to build a sort of proximity trigger between my phone and my PC without using Wi-Fi and GPS - I can't use these for some specific reasons.
Is there any way to make this happen?
Yes this should be doable as long as you use the Background Processing feature for iOS apps. In the example I'll give below, we'll have the PC be the peripheral and the phone be the central, but you can really have it working either way. You will need to do the following:-
First initial connection needs to be performed in the foreground (this is due to iOS's background limitations).
On the iOS side, you need an application that acts as a central that scans and connects to the remove device (check this example as a starting point).
Upon connection, you need to bond with the PC. Bonding is important as it will prevent you from having to do the pairing again in the future. However, pairing/bonding is managed by the iPhone's OS so you cannot write it in your application, so the workaround is to have an encrypted characteristic on the PC side that will force the iPhone to bond (this is covered later).
On the PC side, you need to have a BlueZ script that acts as a peripheral that is always advertising. You can do this using bluetoothctl (check the examples here and here).
Before you start advertising, you need to have a GATT server on the PC side (to do this, check this example).
When registering characteristics, ensure that one of them has the encrypt-read property (you can find a full list of the properties here).
Now when you attempt to read this characteristic from the iOS side, the two devices should bond (make sure that your PC is bondable which you can do this via these commands).
Once the devices are paired, your iOS app needs to be working in the background constantly scanning and attempting to connect to the same peripheral (have a look at this and this example).
You can find more useful information at the links below:-
Getting started with Bluetooth Low Energy
The Ultimate Guide to CoreBluetooth Development
How to manage Bluetooth devices on Linux using bluetoothctl
Qt: 5.10,
Linux Ubuntu 17.10,
Bluez 5.4x
and I´m using QBluetooth to connect with multiple Bluetooth Low Energy Devices. Everything works fine for one Connection. But when I connect to a second Device with QLowEnergyController::connectToDevice() I get the following error and the first Connection gets aborted:
qt.bluetooth.bluez: Cannot connect due to pending active LE Connections
qt.bluetooth.bluez: void QBluetoothSocketPrivate::_q_readNotify() 21 error: -1 "Software caused Connection abort"
After that the second connection gets established.
I`m using one instance of QLowEnergyController in Central Mode per Connection.
After a Research I think it should be possible to create multiple Connections to BLE Peripherals with the Bluez Bluetooth Protocol Stack. But I´m not sure if QBluetooth support this Feature...
Does anybody know something about multiple LE Connections with QBluetooth?
Is this the right way to establish a second Connection?
Does somebody know a good Workaround?
Thanks for your help!
The problem isn't BLE, but its Qt implementation. The documentation says that any attempt to connect simultaneously to two BLE devices using QLowEnergyController will fail. Check it there: http://doc.qt.io/qt-5/qlowenergycontroller.html ; Section "Detailed Description", paragraph 5:
"BlueZ based Linux cannot maintain two connected instances of QLowEnergyController to the same remote device. In such cases the second call to connectToDevice() may fail."
According to this, it should be possible to establish connexion to two different remote devices using two instances of the class, but it simply doesn't work. If you keep on reading the documentation, you'll find out that " This limitation may disappear at some stage in the future.".
I tried a workaround by disconnecting from the first device before connecting to the second device (both TI SensorTag), but since I had to re-discover the services and re-enable the sensors (see disconnectFromDevice() in the documentation) every time I would re-connect the program became way too slow.
If you want to connect to two devices using Qt, you have to use the Bluez API through the D-Bus with Qt's D-Bus classes.
Edit:
I managed to connect to multiple devices using D-Bus classes. The architecture of my program isn't much more complicated, only the syntax got a little more tricky. The only big issue was the BlueZ version: the D-Bus interface changed a lot between 5.3x (default Ubuntu 16.04) that doesn't support Low Energy (experimental...) and later versions. I think that's the reason why Qt's D-Bus Bluetooth hasn' been enabled yet. Since BLE isn't flagged as experimental since BlueZ 5.42, you should be fine using D-Bus with your current version. For the record, I'm perfectly fine using D-Bus with Raspbian's default 5.9 BlueZ.
I am trying to use the second example code for Visual C++ (http://www.ftdichip.com/Support/Soft...SSE/FTCSPI.htm) To connect to the FT2232H Mini Module. My code works and indicates no device is connected when none is. However, when i connect the board and then run the code i recieve the attached message (the device is used by another application). I am not sure why i am getting this message. Any input greatly appreciated.
The FT2232 has two different drivers. One that presents the device as a serial port and one that allows the developer to use a custom interface. Odds are that you have the Virtual Com Port (VCP) driver installed instead of the D2XX driver.
See: http://www.ftdichip.com/Products/ICs/FT2232H.htm
I have been using bluetooth module BC 417 of company "NOVA".
I have kept all UART setting as suggested by datasheet.
i.e. buad rate=9600, parity=none, stop bit=1
My connection is getting established with nokia 5130 bluetooth, but as soon as m going to send something from UART connection is disabled.
Whenever i go to connect this module to android phone's bluetooth, connection does not take place.
For making connection i am using this command BC:CS=<address of bluetooth>
So i have following question:-
Is there any another setting is required in hyper terminal?
Is there any firmware is available for nova comm control interface module version 1.2?
Sorry, I only have enough reputation to answer and not just comment. You might want to try making sure that hardware flow control is switched on. It's a little difficult to know for sure as details of your set-up are so sketchy. Are you connecting this to an embedded micro and then trying to connect to a phone? What are you connecting hyper terminal to? Another phone or this Nova module?