I need to change the text defined in the message SelectDirLabel3, that is shown on the Select Destination Location wizard page depending on a condition known to the pascal code.
I searched for a possibility to overwrite the message SelectDirLabel3 in the pascal code but I have not found a function to do that. I assume this can not be done.
An other possibility could be to edit the setup of the wizard page Select Destination Location with the NextButtonClick() function when Next is clicked on the previous wizard page. But I can not find any documentation how to do that (I just want to change the text of the message SelectDirLabel3 in case the 'condition' is met!)
Maybe there is an other possibility to achieve my objective.
Thanks for any hints!
You indeed cannot change [Messages] on runtime/conditionally.
But you can indeed change the control label. Just set WizardForm.SelectDirLabel.Caption as you need.
Related
As per title. I need to customise AM207500 - Configuration Maintenance screen to add another custom field that will allow me to enter formula similar to QtyRequired field.
I got as far as displaying the correct dialog. But its missing the fields selection.
I believe I'm missing the OnRootFieldsNeeded property. But every time I try to edit the ASPX and manually add this. Its being cleared by Acumatica.
Am I in the right direction ? And how do I force this property in my ASPX ?
TIA
A bit unconventional, but have you tried updating the ASPX page on the custom pages and then clicking on the files section to update the file? This will then ensure the file update occurs before publish and hold the configuration
I am creating a custom webpart using the Url Selector from kentico. I want the user to select content just from the Media Library. I went to form controls -> Url Selector -> Properties -> Dialogs_Content_Hide -> Default Value -> Yes and it still showing it in the Web Part. If I select the Dialogs_Web_Hide, Dialogs_Libraries_Hide and select the yes option in the default values, they hide, all except the Content_Dialogs.
Is this a bug? Or its something wrong?
Here is an example of the tabs
First set the form controls properties back to the way they were. If you don't, it will cause all kinds of problems later on.
Secondly, when you create the property in the webpart in the UI, select the URL selector form control for your text fields control. The scroll down just a bit and under the Editing Control Settings you'll see an "Configure" link. Click it. In there you will be able to tell the form control what tabs you want to enable and disable.
To add to Brenden's answer; if this is something you need to do a lot for your current build, then I'd also suggest making a copy of the Url selector form control and customize the properties as you originally mentioned. This way, you leave the default control in place for the system and have a control tailored to your needs. I've done this just now to check with a new form control that I called Media URL selector. Do make sure that you select the same source file as the original control in the Cloned form control file name property - Kentico by default will try to locate a new file called <original filename>_1.ascx. The reason for this is that admin section of your site also makes use of this control, so you may cause a nasty side effect somewhere else in the system.
As for why the settings had no effect; these are the default values you are setting. If you already have the form control in use, then the default setting would have been applied as they originally were. If you find one of the fields in question, you can change the control type to Text box, click Save, and then reassign it to Media URL selector.
I know this is a common problem, and I tried a few solutions already, but the problem I have right now with my current code is that even though the attachments show in the computed for display field, I get the error "Note Item not Found" when I try to open them.
The form is built with two fields, in a programmable table that displays the editable one or the computed for display one.
The trick I found with Google's help was to delete the computed for display item in the queryopen event, so Notes regenerates the cfd item when opening the document. Visually, this works, as I see the text and attachments, but the attachments can't be opened.
Here is the code that removes the item in the QueryOpen of the form:
...
Set item = doc.GetFirstItem("dspDescription")
If Not item Is Nothing Then Call item.Remove()
...
Has anyone successfully achieved that functionality? Is there another way of doing this? I already tried with subforms, and because of the way the application is built, I need to be able to switch from editable to read only on the flick of a radio button, so subforms are out of the question as they can't be displayed dynamically.
Why don't you simple put the richtext item in a controlled access section and make that section editable / not editable with a computed for display formula. Select "always expand" and hide the section title, so that nobody can collapse it, et voila.
Regarding your comment: With this properties:
for this section in designer:
You get this result:
You see: No twisty, no "visible" section
I'm new to Domino Designer. I'm trying to modify an existing application which is running on a remote server. I create a blank xPage and view in browser and it works. I add a label and view in browser and it works. I add a combo box and setup a data source for my xPage. The data source is in the current application and I'm using a view. I setup my combo to point to that data source and specify BindTo value. I view it in browser and I get Error 500 "HTTP Web Server: Command Not Handled Exception" I can open the view that I've used and see all the data in the view. I can even add, edit, and delete from the view.
Ideas... Thnxs in advance.
Additional Info. I've added a "View" from "Container Controls" and used the same data source and the same view and it also works in the browser.
The error being printed is:
javax.faces.el.PropertyNotFoundException: Error getting property 'CompanyName' from bean of type lotus.domino.local.View
com.sun.faces.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:119)
com.ibm.xsp.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:144)
com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:182)
com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:163)
com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:257)
com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:150) ....
This was already answered in the comments, but I want to write a better answer.
The problem in this case is that a view data source is being used for editing a document. Directly, this is not a possibility, though there are a few great ways to get around this. The first way, and my favorite, is to use an inline form. I think the Extension Library Demo database offers a few great examples of how to go about doing this. One way is to use a tooltip dialog. Another way is an inline form. A repeater is used and for every row in the view, a hidden panel can be made which contains the document data source and all field which are required to be changeable. By clicking on a button or link, the panel is made visible. This is my favorite variant because it is simple, quick, and generally looks great.
Another way to go about this is to have a view data source only, but use scripts to retrieve the document and set the values in the background and then save and release. It all depends on what you are trying to achieve.
My main recommendation is to look at the ExtLib demo and take a look at what they are doing there.
I wanted to put checkbox in my cognos 8 report based on some condition i.e if condition is true checkbox will appear with click mark and if it is not then without click mark.
I'm assuming you are placing this control on a prompt page...
It's kind of convoluted, but here's the only way I know how to do it. You can place 2 "Value Prompt" controls on your prompt page, and set the "Required" property to "No" on both. Set the "Parameter" property to be the same for both prompts (i.e., they will apply the same filter criteria on your query). For one of the prompts, set the "Default Selections" property so that your default value will be automatically selected on one of the controls. Also, be sure to set the "Select UI" property to "Check Box Group" (even if you only have one value to be checked) so you get a check box control.
Now that your controls are setup, you need to place them on your prompt page and apply a conditional render variable to both controls (you can look it up in Help if you aren't sure how to do this -- it's simple, but too lengthy to describe here). Basically, when your query condition is true, render the one with the check box clicked, otherwise render the one without. I not sure about the version support for the "Render Variable" property, but it works in version 8.4.
There isn't a way to my knowledge to dynamically select a default value on a prompt by linking it directly to a query -- You have to go through the conditional formatting/rendering approach.
yes i completely agree with jamey this is the only known way to do this.
there is another much difficult way to do it is by writing a java code which pretty much does tha same.
so i suggest you stick with jamey's solution.
as far as the version question comes, the 'render variable' property works the same in all versions of cognos 8 i.e. 8.2, 8.3 and 8.4.