If we create custom connect account with minimal required options, stripe creates the account but even in the test mode it shows inactive status.
While testing more I came to konw that I have to provide more information, So I followed https://stripe.com/docs/api/accounts/create documentation and provided as much information as I could.
Now the only information left is following :
Remaining Options Img
So I need to know how can I pass these options. I can not find in Docs about it.
Related
I have 2 queries based on the following :
I recently followed this DocuSign article to pass a supplied document to Docusign via the API:
https://www.docusign.com.au/blog/get-the-flow-sending-docusign-envelopes-microsoft-power-automate?_ga=2.99447774.1174083755.1646148960-1179341585.1645460870
Query 1 - This all works apart from the AutoPlace text just isn't getting picked up. I added the variables as described in the article and referenced them in the document footer. The document is passed through the API call and the invitation to sign goes out ok. Is there anything I'm missing here? I can open the document for signing but docusign doesn't go to the places where the AutoPlace tags are, just leaves it open for the user to decide what to do. I've previously tried using AutoPlace using templates, but this is a document that will be sent through the API as it is provided by our users (with the correct AutoPlace intact). The article hints this should just work.
Update : this is now working but need advice on text color
signing screenshot
Update : Showing white signature on black background
white signature
Query 2 - Once the user has signed the document using the above, I want to trigger a power automate flow off. There is a trigger for this but when I try to form the connection to DocuSign, there is only a login for the main account, not the developer account. So the account where I've made the account from isn't the one where I can fire off the triggers from. This makes it impossible to then fire a flow when it has been sent to the API and subsequently signed. Is there a way to use the trigger using the same account as the API account? If not it seems a bit crazy that I can start the process using the API but then can't fire flows from the result of the signings.
We have a company account ( I'm working on behalf of Transport for Wales) but was told there is no API support at all, which also sounds a bit bizarre. Hoping someone can help me!
Query 1 - there's an AutoPlace settings that determine the scope - document/envelope for AutoPlace. You may want to see if the issue happens also when you use the web app and not from API - if the same challenge - then you need to contact support to change this scope. If not, it may mean you're not setting your templateRole correctly. It must match the same one that was defined on the template (case sensitive).
Query 2 - no, the OTB connector is production only. For the developer account you will need to use a custom connector for any REST API, not the one provided for you.
I am trying to use sendgrid on azure, but when I am creating the account, it gives me an error saying:
The portal is having issues getting an authentication token. The experience rendered may be degraded.
Additional information from the call to get a token:
Extension: SendGrid_EmailService
Details: code: 500, statusText: error, message: There was an error processing your request. Please try again in a few moments., stack:
It has been giving me this since morning, pretty annoyed. And also it disables two fields, and marks them as loading:
Screenshot of the two fields marked as loading (For a very long time)
Since sendgrid wasnt working I thought I'd try and use SparkPost- The signup was successful, but its been taking hours to deploy.
Then I thought of manually configuring the smtp settings so the host and user and stuff could be sendgrid, but I wasnt able to find a way to do so.
Could someone help me out please! Thanks in advance!!
EDIT: This problem has been solved by the Microsoft Team.
Looks like SendGrid has some technical problems. You should check first SendGrid official support website if this is the issue. I was using SendGrid for a while, but I had to move to another solution. When you are registering SendGrid account via Azure you getting standard SendGrid plan. That means that you are sending your mails through shared SendGrid IPs. This is probably ok for marketing emails, but if you intend to send any transactional emails like password reset, bills etc you will end up eventually with tearing your hair off the head, because shared SendGrid IPs are in most existing spam blacklists out there.
SendGrid app status
I was able to enter to SendGrid using the following steps from Aaryaman Maheshwari in this comment:
Steps from Aaryaman's answer:
Step 1: In order to find ur username for SendGrid, first, go to the
SendGrid resource and then click properties. Now copy the resource id.
Step 2: Now, in the azure online shell, open bash and type the
following command: az resource show --ids [THE COPIED RESOURCE ID]
Make sure to replace [THE COPIED RESOURCE ID] with the resource Id you
copied in step 1
Step 3: In the json string that the terminal outputs, look for the
username property and note that down
Step 4: After you do that you can manually go to sendgrid.com and then
enter the username you just retrieved and then the password which you
used to sign up with.
Thanks Aaryaman Maheshwari
In order to incresase security, Sendgrid has recently requested to enable 2 factors authentication to connect to your account (it started one or two weeks ago).
Since this moment, the "automatic" connection from Azure to Sendgrid stopped to succes, and we have the same 500 error.
Also, "basic authentication" (username / password) will stop to work (starting from 10 decemeber I believe) in your api.
I'm not sure this is the reason, but it happens at the same time ;)
Just to update:
There was bug identified on Azure Portal and our product engineering team have fixed the issue.
Provisioning SendGrid account via https://portal.azure.com/ and managing works as expected.
The alternate https://rc.portal.azure.com/ URL was shared during the impact and is no longer required to be used.
We had a discussion on Q&A thread. Once again apologies for all the inconvenience. Much appreciate the follow-up and great collaboration.
I have several days trying to customize the email verification of my project but it's been impossible to change anything.
I followed many times:
https://learn.microsoft.com/en-us/azure/active-directory-b2c/custom-policy-get-started
https://learn.microsoft.com/en-us/azure/active-directory-b2c/custom-email-sendgrid
https://learn.microsoft.com/en-us/azure/active-directory-b2c/custom-email-mailjet
I uploaded the new custom policies B2C_1A_TrustFrameworkBase and B2C_1A_TrustFrameworkExtensions with all the changes described in the manual, but I still don't know why I can't even generate an application error and the default Microsoft email verification keeps working normally, is there any way to track what I might be missing?
You can refer to the troubleshoot documentation about turning the B2C engine into developer mode and tracking the B2C engine itself.
There is a separate documentation and technical profiles explaining how to use application insights to track user behavior during user journeys. You can discover more about this here: https://learn.microsoft.com/en-us/azure/active-directory-b2c/analytics-with-application-insights
I want to get access token foursquare like this link `https://developer.foursquare.com/overview/auth#userless' and this is code
https://foursquare.com/oauth2/access_token
?client_id=YOUR_CLIENT_ID
&client_secret=YOUR_CLIENT_SECRET
&grant_type=authorization_code
&redirect_uri=YOUR_REGISTERED_REDIRECT_URI
&code=CODE
I don't understand what YOUR_CLIENT_ID,YOUR_CLIENT_SECRET and YOUR_REGISTERED_REDIRECT_URI are. Can you explain and show some examples ? Thank you very much for helping.
"Before you get started, you should create an app on Foursquare. This will give you a client ID and client secret which are needed for using the API. The documentation in this guide is meant to give a high-level conceptual overview of the Foursquare platform, help you grok its different parts and capabilities, and get started using the API’s most popular features."
https://developer.foursquare.com/start
Go to the link: https://foursquare.com/developers/apps
Click the option: "Create a new app". Enter the name of the app and a valid url from where your app can be downloaded. These two fields are mandatory. You can provide the details for other fields also. If you don't have a download link, you can create a folder in dropbox (google drive, onedrive) and provide that link. Create your app and you will get your private CLIENT_ID and CLIENT_SECRET.
I am getting below error while accessing DocuSign SOAP service using SOAP UI tool. I also tried using integration key in username [Integration Key]userguid format I got same exception.
Can you please help me to resolve this issue.
Ok I've found out which option it is, and have enabled this option on your account. You should be able to export authoritative copies from this account now. For reference sake, the option I enabled was a member setting called
Can Export Authoritative Copies?
Please note, though, that since this is a setting that we have to enable on DocuSign's side, that means that it might be an enterprise or workgroup level feature. On your demo account we enable whatever you like so you can test things out, however when you are ready to move to production and purchase a corresponding production account that uses the API, you'll need to make sure you purchase an account that allows this feature. You can find out more from your Account Manager.