Godot Version: v4.0-alpha15
I have a terrain being generated using the SurfaceTool and the MeshInstance3D. I am also moving a purple decal acrossed the surface based on the 3D mouse position. Below is a screenshot of what this looks like.
I want to take the 3D mouse position and raise/lower the terrain on an action press. I found the MeshDataTool but am not quite sure if this allows for that and also not completely sure how to convert the 3D mouse position to the corresponding vertices.
At this point I am sort of completely stuck as there's not a whole lot of documentation that I could find that helps.
I appreciate the help in advance!
I was actually able to figure this out using the MeshDataTool as I mentioned in the original post.
I use the Vector3::distance_to method to get any vertex within 3 of the target position, then I use MeshDataTool::set_vertex in combination with Vector3 methods to add and subtract each of those vertex positions.
var target_position = Vector3(0, 0, 0)
var mdt = MeshDataTool.new()
var mesh = terrain_mesh_instance.mesh
mdt.create_from_surface(mesh, 0)
var points = get_vertex_id(mdt, target_position)
for i in points:
if Input.is_action_pressed("shift"):
mdt.set_vertex(i, mdt.get_vertex(i) + Vector3(0, 1 * delta,0))
elif Input.is_key_pressed(KEY_ALT):
var coords = mdt.get_vertex(i)
coords.y = 0
mdt.set_vertex(i, coords)
else:
mdt.set_vertex(i, mdt.get_vertex(i) + Vector3(0, -1 * delta,0))
# This fixes the normals so the shadows work properly
for face in mdt.get_face_count():
var vertex = mdt.get_face_vertex(face, 0)
var normal = mdt.get_face_normal(face)
mdt.set_vertex_normal(vertex, normal)
mesh.clear_surfaces()
mdt.commit_to_surface(mesh)
Related
I have a Goldberg polyhedron that I have procedurally generated. I would like to draw an outline effect around a group of “faces” (let's call them tiles) similar to the image below, preferably without generating two meshes, doing the scaling in the vertex shader. Can anyone help?
My assumption is to use a scaled version of the tiles to write into a stencil buffer, then redraw those tiles comparing the stencil to draw the outline (as usual for this kind of effect), but I can't come up with an elegant solution to scale the tiles.
My best idea so far is to get the center point of the neighbouring tiles (green below) for each edge vertex (blue) and move the vertex towards them weighted by how many there are, which would leave the interior ones unmodified and the exterior ones moved inward. I think this works in principle, but I would need to generate two meshes as I couldn't do scaling this way in the vertex shader (as far as I know).
If it’s relevant this is how the polyhedron is constructed. Each tile is a separate object, the surface is triangulated with a central point and there is another point at the polyhedron’s origin (also the tile object’s origin). This is just so the tiles can be scaled uniformly and protrude from the polyhedron without creating gaps or overlaps.
Thanks in advance for any help!
EDIT:
jsb's answer was a simple and elegant solution to this problem. I just wanted to add some extra information in case someone else has the same problem.
First, here is the C# code I used to calculate these UVs:
// Use duplicate vertex count (over 4)
var vertices = mesh.vertices;
var uvs = new Vector2[vertices.Length];
for(int i = 0; i < vertices.Length; i++)
{
var duplicateCount = vertices.Count(s => s == vertices[i]);
var isInterior = duplicateCount > 4;
uvs[i] = isInterior ? Vector2.zero : Vector2.one;
}
Note that this works because I have not welded any vertices in my original mesh so I can count the adjoining triangles by just looking for duplicate vertices.
You can also do it by counting triangles like this (this would work with merged vertices, at least with how Unity's mesh data is laid out):
// Use triangle count using this vertex (over 4)
var triangles = mesh.triangles;
var uvs = new Vector2[mesh.vertices.Length];
for(int i = 0; i < triangles.Length; i++)
{
var triCount = triangles.Count(s => mesh.vertices[s] == mesh.vertices[triangles[i]]);
var isInterior = triCount > 4;
uvs[i] = isInterior ? Vector2.zero : Vector2.one;
}
Now on to the following problem. In my use case I also need to generate outlines for irregular tile patterns like this:
I neglected to mention this in the original post. Jsb's answer is still valid but the above code will not work as is for this. As you can see, when we have a tile that is only connected by one edge, the connecting vertices only "share" 2 interior triangles so we get an "exterior" edge. As a solution to this I created extra vertices along the the exterior edges of the tiles like so:
I did this by calculating the half way point along the vector between the original exterior tile vertices (a + (b - a) * 0.5) and inserting a point there. But, as you can see, the simple "duplicate vertices > 4" no longer works for determining which tiles are on the exterior.
My solution was to wind the vertices in a specific order so I know that every 3rd vertex is one I inserted along the edge like this:
Vector3 a = vertex;
Vector3 b = nextVertex;
Vector3 c = (vertex + (nextVertex - vertex) * 0.5f);
Vector3 d = tileCenter;
CreateTriangle(c, d, a);
CreateTriangle(c, b, d);
Then modify the UV code to test duplicates > 2 for these vertices (every third vertex starting at 0):
// Use duplicate vertex count
var vertices = mesh.vertices;
var uvs = new Vector2[vertices.Length];
for(int i = 0; i < vertices.Length; i++)
{
var duplicateCount = vertices.Count(s => s == vertices[i]);
var isMidPoint = i % 3 == 0;
var isInterior = duplicateCount > (isMidPoint ? 2 : 4);
uvs[i] = isInterior ? Vector2.zero : Vector2.one;
}
And here is the final result:
Thanks jsb!
One option that avoids a second mesh would be texturing:
Let's say you define 1D texture coordinates on the triangle vertices like this:
When rendering the mesh, use these coordinates to look up in a 1D texture which defines the interior and border color:
Of course, instead of using a texture, you can just as well implement this behavior in a fragment shader by thresholding the texture coordinate, conceptually:
if (u > 0.9)
fragColor = white;
else
fragColor = gray;
To update the outline, you would only need upload a new set of tex coords, which are just 1 for vertices on the outline and 0 everywhere else.
Depending on whether you want the outlines to extend only into the interior of the selected region or symmetrically to both sides of the boundary, you would need to specify the tex coords either per-corner or per-vertex, respectively.
I am trying to develop a filter where you have to eat elements in screen. My problem is that I cannot find the way to get the facemesh position and rotation in the world so that way I can compare the coordinates of facemesh with coordinates of the elements to eat. I try with worldtransform but allways returns 0 for my mesh. Is there any way to do that?
thanks so much
I don't know your scene tree configuration. Assuming you have everything inside Focal Distance
const FaceTracking = require('FaceTracking');
const Scene = require('Scene');
const R = require('Reactive');
const face = FaceTracking.face(0);
const focalDistance = -Scene.root.find('Focal Distance').transform.z.pinLastValue();
const mouthFocal = face.cameraTransform.applyTo(face.mouth.center).add(R.point(0, 0, focalDistance));
Adding focalDistance to Z is for transformation from Camera space.
This is the problem I am facing simplified:
Using directx I need to draw two(or more) exactly (in the same 2d plane) overlapping triangles. The triangles are semi transparent but the effect I want to release is that they clip to transparency of a single triangle. The picture below might depict the problem better.
Is there a way to do this?
I use this to get overlapping transparent triangles to not "accumulate". You need to create a blendstate and set it on output merge.
blendStateDescription.AlphaToCoverageEnable = false;
blendStateDescription.RenderTarget[0].IsBlendEnabled = true;
blendStateDescription.RenderTarget[0].SourceBlend = D3D11.BlendOption.SourceAlpha;
blendStateDescription.RenderTarget[0].DestinationBlend = D3D11.BlendOption.One; //
blendStateDescription.RenderTarget[0].BlendOperation = D3D11.BlendOperation.Maximum;
blendStateDescription.RenderTarget[0].SourceAlphaBlend = D3D11.BlendOption.SourceAlpha; //Zero
blendStateDescription.RenderTarget[0].DestinationAlphaBlend = D3D11.BlendOption.DestinationAlpha;
blendStateDescription.RenderTarget[0].AlphaBlendOperation = D3D11.BlendOperation.Maximum;
blendStateDescription.RenderTarget[0].RenderTargetWriteMask = D3D11.ColorWriteMaskFlags.All;
Hope this helps. Code is in C# but it works the same in C++ etc. Basically, takes the alpha of both source and destination, compares and takes the max. Which will always be the same (as long as you use the same alpha on both triangles) otherwise it will render the one with the most alpha.
edit: I've added a sample of what the blending does in my project. The roads here overlap. Overlap Sample
My pixel shader is as:
I pass the UV co-ords in a float4.
xy = uv coords.
w is the alpha value.
Pixel shader code
float4 pixelColourBlend;
pixelColourBlend = primaryTexture.Sample(textureSamplerStandard, input.uv.xy, 0);
pixelColourBlend.w = input.uv.w;
clip(pixelColourBlend.w - 0.05f);
return pixelColourBlend;
Ignore my responses, couldn't edit them...grrrr.
Enabling the depth stencil prevents this problem
I am drawing polygon by capturing mouse clicks on canvas and then passing these points to fabric.Polygon. So, in this manner I'm drawing multiple polygons.
What I need know is, I want to get the mouse co-ordinates (pixel points on canvas) for the polygon which is selected now?
I have tried with:
canvas.getActiveObject().get('points');
But this is giving some negative and some positive values.
So, can u please tell me a way to find out the polygon points?
Polygon points are relative to its center so you can get their "absolute" position like so:
var polygon = canvas.getActiveObject();
var polygonCenter = polygon.getCenterPoint();
var translatedPoints = polygon.get('points').map(function(p) {
return {
x: polygonCenter.x + p.x,
y: polygonCenter.y + p.y
};
});
Let's check how this looks:
translatedPoints.forEach(function(p) {
canvas.getContext().strokeRect(p.x-5, p.y-5, 10, 10);
});
I think this will only work if polygon's angle is at 0 (otherwise need to "rotate" points coordinates as well).
It looks like that from version 2.0 they changed the coordinates of the polygon. Before 2.0 points relative to the center of the polygon; after 2.0 they are absolute to the canvas;
Check out my response to the similar questions https://stackoverflow.com/a/53710375/4681279
For a project we are trying to make a circle into a line (and back again) while it is rotating along a linear path, much like a tire rotates and translates when rolling on a road, or a curled fore finger is extended and recurled into the palm.
In this Fiddle, I have a static SVG (the top circle) that rotates along the linear black path (which is above the circle, to mimic a finger extending) that is defined in the HTML.
I also use d3 to generate a "circle" that is made up of connected points (and can unfurl if you click on/in the circle thanks to #ChrisJamesC here ), and is translated and rotated
in the function moveAlongLine when you click on the purple Line:
function moveAlongLine() {
circle.data([lineData])
.attr("transform", "translate(78.5,0) rotate(-90, 257.08 70) ")
.duration(1000)
circle.on("click", transitionToCircle)
}
The first problem is that the .duration(1000) is not recognized and throws a Uncaught TypeError: Object [object Array] has no method 'duration' in the console, so there is a difference between the static definition of dur in SVG and dynamically setting it in JS/D3, but this is minor.
The other is should the transform attributes be abstracted from one another like in the static circle? in the static circle, the translate is one animation, and the rotation is another, they just have the same star and duration, so they animate together. How would you apply both in d3?
The challenge that I can not get, is how to let it unroll upwards(and also re-roll back), with the static point being the top center of the circle also being the same as the leftmost point on the line.
these seem better:
I should try to get the unfurl animation to occur while also rotating? This seems like it would need to be stepwise/sequential based...
Or Consider an octogon (defined as a path), and if it were to rotate 7 of the sides, then 6, then 5.... Do this for a rather large number of points on a polyhedron? (the circle only needs to be around 50 or so pixels, so 100 points would be more than enough) This is the middle example in the fiddle. Maybe doing this programmatically?
Or This makes me think of a different way: (in the case of the octogon), I could have 8 line paths (with no Z, just an additional closing point), and transition between them? Like this fiddle
Or anything todo with keyframes? I have made an animation in Synfig, but am unsure ho get it to SVG. The synfig file is at http://specialorange.org/filedrop/unroll.sifz if you can convert to SVG, but the xsl file here doesn't correctly convert it for me using xsltproc.
this seems really complicated but potential:
Define a path (likely a bézier curve with the same number of reference points) that the points follow, and have the reference points dynamically translate as well... see this for an concept example
this seems complicated and clunky:
Make a real circle roll by, with a growing mask in front of it, all while a line grows in length
A couple of notes:
The number of points in the d3 circle can be adjusted in the JS, it is currently set low so that you can see a bit of a point in the rendering to verify the rotation has occurred (much like the gradient is in the top circle).
this is to help students learn what is conserved between a number line and a circle, specifically to help learn fractions. For concept application, take a look at compthink.cs.vt.edu:3000 to see our prototype, and this will help with switching representations, to help you get a better idea...
I ended up using the same function that generates the circle as in the question, and did a bit of thinking, and it seemed like I wanted an animation that looked like a finger unrolling like this fiddle. This lead me to the math and idea needed to make it happen in this fiddle.
The answer is an array of arrays, with each nested array being a line in the different state, and then animate by interpolating between the points.
var circleStates = [];
for (i=0; i<totalPoints; i++){
//circle portion
var circleState = $.map(Array(numberOfPoints), function (d, j) {
var x = marginleft + radius + lineDivision*i + radius * Math.sin(2 * j * Math.PI / (numberOfPoints - 1));
var y = margintop + radius - radius * Math.cos(2 * j * Math.PI / (numberOfPoints - 1));
return { x: x, y: y};
})
circleState.splice(numberOfPoints-i);
//line portion
var lineState = $.map(Array(numberOfPoints), function (d, j) {
var x = marginleft + radius + lineDivision*j;
var y = margintop;
return { x: x, y: y};
})
lineState.splice(i);
//together
var individualState = lineState.concat(circleState);
circleStates.push(individualState);
}
and the animation(s)
function all() {
for(i=0; i<numberOfPoints; i++){
circle.data([circleStates[i]])
.transition()
.delay(dur*i)
.duration(dur)
.ease("linear")
.attr('d', pathFunction)
}
}
function reverse() {
for(i=0; i<numberOfPoints; i++){
circle.data([circleStates[numberOfPoints-1-i]])
.transition()
.delay(dur*i)
.duration(dur)
.ease("linear")
.attr('d', pathFunction)
}
}
(Note: This should be in comments but not enough spacing)
Circle Animation
Try the radial wipe from SO. Need to tweak it so angle starts at 180 and ends back at same place (line#4-6,19) and move along the X-axis (line#11) on each interation. Change the <path... attribute to suit your taste.
Line Animation Grow a line from single point to the length (perimeter) of the circle.
Sync both animation so that it appears good on all browsers (major headache!).