Related
Is there an efficient way to identify the last character/string match in a string using base functions? I.e. not the last character/string of the string, but the position of a character/string's last occurrence in a string. Search and find both work left-to-right so I can't think how to apply without lengthy recursive algorithm. And this solution now seems obsolete.
I think I get what you mean. Let's say for example you want the right-most \ in the following string (which is stored in cell A1):
Drive:\Folder\SubFolder\Filename.ext
To get the position of the last \, you would use this formula:
=FIND("#",SUBSTITUTE(A1,"\","#",(LEN(A1)-LEN(SUBSTITUTE(A1,"\","")))/LEN("\")))
That tells us the right-most \ is at character 24. It does this by looking for "#" and substituting the very last "\" with an "#". It determines the last one by using
(len(string)-len(substitute(string, substring, "")))\len(substring)
In this scenario, the substring is simply "\" which has a length of 1, so you could leave off the division at the end and just use:
=FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))
Now we can use that to get the folder path:
=LEFT(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\","")))))
Here's the folder path without the trailing \
=LEFT(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))-1)
And to get just the filename:
=MID(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))+1,LEN(A1))
However, here is an alternate version of getting everything to the right of the last instance of a specific character. So using our same example, this would also return the file name:
=TRIM(RIGHT(SUBSTITUTE(A1,"\",REPT(" ",LEN(A1))),LEN(A1)))
How about creating a custom function and using that in your formula? VBA has a built-in function, InStrRev, that does exactly what you're looking for.
Put this in a new module:
Function RSearch(str As String, find As String)
RSearch = InStrRev(str, find)
End Function
And your function will look like this (assuming the original string is in B1):
=LEFT(B1,RSearch(B1,"\"))
New Answer | 31-3-2022:
With even newer functions come even shorter answers. At time of writing in BETA, but probably widely available in the near future, we can use TEXTBEFORE():
=LEN(TEXTBEFORE(A2,B2,-1))+1
The trick here is that the 3rd parameter tells the function to retrieve the last occurence of the substring we give in the 2nd parameter. At time of writing this function is still case-sensitive by default which could be handeld by the optional 4th parameter.
Original Answer | 17-6-2020:
With newer versions of excel come new functions and thus new methods. Though it's replicable in older versions (yet I have not seen it before), when one has Excel O365 one can use:
=MATCH(2,1/(MID(A1,SEQUENCE(LEN(A1)),1)="Y"))
This can also be used to retrieve the last position of (overlapping) substrings:
=MATCH(2,1/(MID(A1,SEQUENCE(LEN(A1)),2)="YY"))
| Value | Pattern | Formula | Position |
|--------|---------|------------------------------------------------|----------|
| XYYZ | Y | =MATCH(2,1/(MID(A2,SEQUENCE(LEN(A2)),1)="Y")) | 3 |
| XYYYZ | YY | =MATCH(2,1/(MID(A3,SEQUENCE(LEN(A3)),2)="YY")) | 3 |
| XYYYYZ | YY | =MATCH(2,1/(MID(A4,SEQUENCE(LEN(A4)),2)="YY")) | 4 |
Whilst this both allows us to no longer use an arbitrary replacement character and it allows overlapping patterns, the "downside" is the useage of an array.
Note: You can force the same behaviour in older Excel versions through either
=MATCH(2,1/(MID(A2,ROW(A1:INDEX(A:A,LEN(A2))),1)="Y"))
Entered through CtrlShiftEnter, or using an inline INDEX to get rid of implicit intersection:
=MATCH(2,INDEX(1/(MID(A2,ROW(A1:INDEX(A:A,LEN(A2))),1)="Y"),))
tigeravatar and Jean-François Corbett suggested to use this formula to generate the string right of the last occurrence of the "\" character
=TRIM(RIGHT(SUBSTITUTE(A1,"\",REPT(" ",LEN(A1))),LEN(A1)))
If the character used as separator is space, " ", then the formula has to be changed to:
=SUBSTITUTE(RIGHT(SUBSTITUTE(A1," ",REPT("{",LEN(A1))),LEN(A1)),"{","")
No need to mention, the "{" character can be replaced with any character that would not "normally" occur in the text to process.
Just came up with this solution, no VBA needed;
Find the last occurance of "_" in my example;
=IFERROR(FIND(CHAR(1);SUBSTITUTE(A1;"_";CHAR(1);LEN(A1)-LEN(SUBSTITUTE(A1;"_";"")));0)
Explained inside out;
SUBSTITUTE(A1;"_";"") => replace "_" by spaces
LEN( *above* ) => count the chars
LEN(A1)- *above* => indicates amount of chars replaced (= occurrences of "_")
SUBSTITUTE(A1;"_";CHAR(1); *above* ) => replace the Nth occurence of "_" by CHAR(1) (Nth = amount of chars replaced = the last one)
FIND(CHAR(1); *above* ) => Find the CHAR(1), being the last (replaced) occurance of "_" in our case
IFERROR( *above* ;"0") => in case no chars were found, return "0"
Hope this was helpful.
You could use this function I created to find the last instance of a string within a string.
Sure the accepted Excel formula works, but it's much too difficult to read and use. At some point you have to break out into smaller chunks so it's maintainable. My function below is readable, but that's irrelevant because you call it in a formula using named parameters. This makes using it simple.
Public Function FindLastCharOccurence(fromText As String, searchChar As String) As Integer
Dim lastOccur As Integer
lastOccur = -1
Dim i As Integer
i = 0
For i = Len(fromText) To 1 Step -1
If Mid(fromText, i, 1) = searchChar Then
lastOccur = i
Exit For
End If
Next i
FindLastCharOccurence = lastOccur
End Function
I use it like this:
=RIGHT(A2, LEN(A2) - FindLastCharOccurence(A2, "\"))
Considering a part of a Comment made by #SSilk my end goal has really been to get everything to the right of that last occurence an alternative approach with a very simple formula is to copy a column (say A) of strings and on the copy (say ColumnB) apply Find and Replace. For instance taking the example: Drive:\Folder\SubFolder\Filename.ext
This returns what remains (here Filename.ext) after the last instance of whatever character is chosen (here \) which is sometimes the objective anyway and facilitates finding the position of the last such character with a short formula such as:
=FIND(B1,A1)-1
I'm a little late to the party, but maybe this could help. The link in the question had a similar formula, but mine uses the IF() statement to get rid of errors.
If you're not afraid of Ctrl+Shift+Enter, you can do pretty well with an array formula.
String (in cell A1):
"one.two.three.four"
Formula:
{=MAX(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)))} use Ctrl+Shift+Enter
Result: 14
First,
ROW($1:$99)
returns an array of integers from 1 to 99: {1,2,3,4,...,98,99}.
Next,
MID(A1,ROW($1:$99),1)
returns an array of 1-length strings found in the target string, then returns blank strings after the length of the target string is reached: {"o","n","e",".",..."u","r","","",""...}
Next,
IF(MID(I16,ROW($1:$99),1)=".",ROW($1:$99))
compares each item in the array to the string "." and returns either the index of the character in the string or FALSE: {FALSE,FALSE,FALSE,4,FALSE,FALSE,FALSE,8,FALSE,FALSE,FALSE,FALSE,FALSE,14,FALSE,FALSE.....}
Last,
=MAX(IF(MID(I16,ROW($1:$99),1)=".",ROW($1:$99)))
returns the maximum value of the array: 14
Advantages of this formula is that it is short, relatively easy to understand, and doesn't require any unique characters.
Disadvantages are the required use of Ctrl+Shift+Enter and the limitation on string length. This can be worked around with a variation shown below, but that variation uses the OFFSET() function which is a volatile (read: slow) function.
Not sure what the speed of this formula is vs. others.
Variations:
=MAX((MID(A1,ROW(OFFSET($A$1,,,LEN(A1))),1)=".")*ROW(OFFSET($A$1,,,LEN(A1)))) works the same way, but you don't have to worry about the length of the string
=SMALL(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)),2) determines the 2nd occurrence of the match
=LARGE(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)),2) determines the 2nd-to-last occurrence of the match
=MAX(IF(MID(I16,ROW($1:$99),2)=".t",ROW($1:$99))) matches a 2-character string **Make sure you change the last argument of the MID() function to the number of characters in the string you wish to match!
In newer versions of Excel (2013 and up) flash fill might be a simple and quick solution see: Using Flash Fill in Excel
.
For a string in A1 and substring in B1, use:
=XMATCH(B1,MID(A1,SEQUENCE(LEN(A1)),LEN(B1)),,-1)
Working from inside out, MID(A1,SEQUENCE(LEN(A1)),LEN(B1)) splits string A1 into a dynamic array of substrings, each the length of B1. To find the position of the last occurrence of substring B1, we use XMATCH with its Search_mode argument set to -1.
A simple way to do that in VBA is:
YourText = "c:\excel\text.txt"
xString = Mid(YourText, 2 + Len(YourText) - InStr(StrReverse(YourText), "\" ))
Very late to the party, but A simple solution is using VBA to create a custom function.
Add the function to VBA in the WorkBook, Worksheet, or a VBA Module
Function LastSegment(S, C)
LastSegment = Right(S, Len(S) - InStrRev(S, C))
End Function
Then the cell formula
=lastsegment(B1,"/")
in a cell and the string to be searched in cell B1 will populate the cell with the text trailing the last "/" from cell B1.
No length limit, no obscure formulas.
Only downside I can think is the need for a macro-enabled workbook.
Any user VBA Function can be called this way to return a value to a cell formula, including as a parameter to a builtin Excel function.
If you are going to use the function heavily you'll want to check for the case when the character is not in the string, then string is blank, etc.
If you're only looking for the position of the last instance of character "~" then
=len(substitute(String,"~",""))+1
I'm sure there is version that will work with the last instance of a string but I have to get back to work.
Cell A1 = find/the/position/of/the last slash
simple way to do it is reverse the text and then find the first slash as normal. Now you can get the length of the full text minus this number.
Like so:
=LEN(A1)-FIND("/",REVERSETEXT(A1),1)+1
This returns 21, the position of the last /
I want to extract only last two numeric values from a string variable and assign it to a new variable. Firstly i have extracted all the numeric values from the string using the code below and assigned it to a new variable but i ultimately want to extract only the last two numeric values so is there any better way to do this.
UI_DUM = input(compress(Prod_Desc,,"kd"),best.);
And one more question is: how to assign a temp variable for doing some manupulation work in SAS?
Here is the code.
You are doing it right, to remove the characters and keeping only digits. The same is being done for variable "temp1"(in the below code).
In the second step, using the length function, to calculate the total length of the string which now contains only digits. In the third step using the substr function to extract the last two digits.
If you want to do it in one statement, "final" variable is the answer.
LENGTH Function - Returns the length of a non-blank character string, excluding
trailing blanks, and returns 1 for a blank character string
compress function with "kd" option - would keep only digits.
COMPRESS(<, chars><, modifiers>)
Modifier - specifies a character constant, variable, or expression in which each non-blank character modifies the action of the COMPRESS function. Blanks are ignored. The following characters can be used as modifiers.
d or D adds digits to the list of characters.
k or K keeps the characters in the list instead of removing them
substr function - Extracts a substring from an argument -
SUBSTR(string, position<,length>)
data _null_;
Test_string="ada13117a1w11da1286s";
temp1=compress(Test_string, , 'kd');
temp2=length(temp1);
temp3=substr(temp1,temp2-1,2);
final=substr(compress(Test_string, , 'kd'),length(compress(temp1))-1,2);
put _all_;
run;
Regarding the temp variable, there is no such one in SAS. Just use any variable name and use the drop statement in final dataset like below;
data test(drop = temp); /*Would work as the temp variable*/
temp= 2*balance;/*just for example*/
/*use the temp in further calculations*/
run;
A somewhat different take:
data want;
set have;
UI_DUM = input(compress(Prod_Desc,,"kd"),best.);
UI_DUM_last2 = mod(UI_DUM,100);
run;
You could do that all in one line of course as well. This uses the numeric modulo function to simply give you the last 2 digits (any number modulo 100 will return the final 2 digits).
Is there an efficient way to identify the last character/string match in a string using base functions? I.e. not the last character/string of the string, but the position of a character/string's last occurrence in a string. Search and find both work left-to-right so I can't think how to apply without lengthy recursive algorithm. And this solution now seems obsolete.
I think I get what you mean. Let's say for example you want the right-most \ in the following string (which is stored in cell A1):
Drive:\Folder\SubFolder\Filename.ext
To get the position of the last \, you would use this formula:
=FIND("#",SUBSTITUTE(A1,"\","#",(LEN(A1)-LEN(SUBSTITUTE(A1,"\","")))/LEN("\")))
That tells us the right-most \ is at character 24. It does this by looking for "#" and substituting the very last "\" with an "#". It determines the last one by using
(len(string)-len(substitute(string, substring, "")))\len(substring)
In this scenario, the substring is simply "\" which has a length of 1, so you could leave off the division at the end and just use:
=FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))
Now we can use that to get the folder path:
=LEFT(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\","")))))
Here's the folder path without the trailing \
=LEFT(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))-1)
And to get just the filename:
=MID(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))+1,LEN(A1))
However, here is an alternate version of getting everything to the right of the last instance of a specific character. So using our same example, this would also return the file name:
=TRIM(RIGHT(SUBSTITUTE(A1,"\",REPT(" ",LEN(A1))),LEN(A1)))
How about creating a custom function and using that in your formula? VBA has a built-in function, InStrRev, that does exactly what you're looking for.
Put this in a new module:
Function RSearch(str As String, find As String)
RSearch = InStrRev(str, find)
End Function
And your function will look like this (assuming the original string is in B1):
=LEFT(B1,RSearch(B1,"\"))
New Answer | 31-3-2022:
With even newer functions come even shorter answers. At time of writing in BETA, but probably widely available in the near future, we can use TEXTBEFORE():
=LEN(TEXTBEFORE(A2,B2,-1))+1
The trick here is that the 3rd parameter tells the function to retrieve the last occurence of the substring we give in the 2nd parameter. At time of writing this function is still case-sensitive by default which could be handeld by the optional 4th parameter.
Original Answer | 17-6-2020:
With newer versions of excel come new functions and thus new methods. Though it's replicable in older versions (yet I have not seen it before), when one has Excel O365 one can use:
=MATCH(2,1/(MID(A1,SEQUENCE(LEN(A1)),1)="Y"))
This can also be used to retrieve the last position of (overlapping) substrings:
=MATCH(2,1/(MID(A1,SEQUENCE(LEN(A1)),2)="YY"))
| Value | Pattern | Formula | Position |
|--------|---------|------------------------------------------------|----------|
| XYYZ | Y | =MATCH(2,1/(MID(A2,SEQUENCE(LEN(A2)),1)="Y")) | 3 |
| XYYYZ | YY | =MATCH(2,1/(MID(A3,SEQUENCE(LEN(A3)),2)="YY")) | 3 |
| XYYYYZ | YY | =MATCH(2,1/(MID(A4,SEQUENCE(LEN(A4)),2)="YY")) | 4 |
Whilst this both allows us to no longer use an arbitrary replacement character and it allows overlapping patterns, the "downside" is the useage of an array.
Note: You can force the same behaviour in older Excel versions through either
=MATCH(2,1/(MID(A2,ROW(A1:INDEX(A:A,LEN(A2))),1)="Y"))
Entered through CtrlShiftEnter, or using an inline INDEX to get rid of implicit intersection:
=MATCH(2,INDEX(1/(MID(A2,ROW(A1:INDEX(A:A,LEN(A2))),1)="Y"),))
tigeravatar and Jean-François Corbett suggested to use this formula to generate the string right of the last occurrence of the "\" character
=TRIM(RIGHT(SUBSTITUTE(A1,"\",REPT(" ",LEN(A1))),LEN(A1)))
If the character used as separator is space, " ", then the formula has to be changed to:
=SUBSTITUTE(RIGHT(SUBSTITUTE(A1," ",REPT("{",LEN(A1))),LEN(A1)),"{","")
No need to mention, the "{" character can be replaced with any character that would not "normally" occur in the text to process.
Just came up with this solution, no VBA needed;
Find the last occurance of "_" in my example;
=IFERROR(FIND(CHAR(1);SUBSTITUTE(A1;"_";CHAR(1);LEN(A1)-LEN(SUBSTITUTE(A1;"_";"")));0)
Explained inside out;
SUBSTITUTE(A1;"_";"") => replace "_" by spaces
LEN( *above* ) => count the chars
LEN(A1)- *above* => indicates amount of chars replaced (= occurrences of "_")
SUBSTITUTE(A1;"_";CHAR(1); *above* ) => replace the Nth occurence of "_" by CHAR(1) (Nth = amount of chars replaced = the last one)
FIND(CHAR(1); *above* ) => Find the CHAR(1), being the last (replaced) occurance of "_" in our case
IFERROR( *above* ;"0") => in case no chars were found, return "0"
Hope this was helpful.
You could use this function I created to find the last instance of a string within a string.
Sure the accepted Excel formula works, but it's much too difficult to read and use. At some point you have to break out into smaller chunks so it's maintainable. My function below is readable, but that's irrelevant because you call it in a formula using named parameters. This makes using it simple.
Public Function FindLastCharOccurence(fromText As String, searchChar As String) As Integer
Dim lastOccur As Integer
lastOccur = -1
Dim i As Integer
i = 0
For i = Len(fromText) To 1 Step -1
If Mid(fromText, i, 1) = searchChar Then
lastOccur = i
Exit For
End If
Next i
FindLastCharOccurence = lastOccur
End Function
I use it like this:
=RIGHT(A2, LEN(A2) - FindLastCharOccurence(A2, "\"))
Considering a part of a Comment made by #SSilk my end goal has really been to get everything to the right of that last occurence an alternative approach with a very simple formula is to copy a column (say A) of strings and on the copy (say ColumnB) apply Find and Replace. For instance taking the example: Drive:\Folder\SubFolder\Filename.ext
This returns what remains (here Filename.ext) after the last instance of whatever character is chosen (here \) which is sometimes the objective anyway and facilitates finding the position of the last such character with a short formula such as:
=FIND(B1,A1)-1
I'm a little late to the party, but maybe this could help. The link in the question had a similar formula, but mine uses the IF() statement to get rid of errors.
If you're not afraid of Ctrl+Shift+Enter, you can do pretty well with an array formula.
String (in cell A1):
"one.two.three.four"
Formula:
{=MAX(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)))} use Ctrl+Shift+Enter
Result: 14
First,
ROW($1:$99)
returns an array of integers from 1 to 99: {1,2,3,4,...,98,99}.
Next,
MID(A1,ROW($1:$99),1)
returns an array of 1-length strings found in the target string, then returns blank strings after the length of the target string is reached: {"o","n","e",".",..."u","r","","",""...}
Next,
IF(MID(I16,ROW($1:$99),1)=".",ROW($1:$99))
compares each item in the array to the string "." and returns either the index of the character in the string or FALSE: {FALSE,FALSE,FALSE,4,FALSE,FALSE,FALSE,8,FALSE,FALSE,FALSE,FALSE,FALSE,14,FALSE,FALSE.....}
Last,
=MAX(IF(MID(I16,ROW($1:$99),1)=".",ROW($1:$99)))
returns the maximum value of the array: 14
Advantages of this formula is that it is short, relatively easy to understand, and doesn't require any unique characters.
Disadvantages are the required use of Ctrl+Shift+Enter and the limitation on string length. This can be worked around with a variation shown below, but that variation uses the OFFSET() function which is a volatile (read: slow) function.
Not sure what the speed of this formula is vs. others.
Variations:
=MAX((MID(A1,ROW(OFFSET($A$1,,,LEN(A1))),1)=".")*ROW(OFFSET($A$1,,,LEN(A1)))) works the same way, but you don't have to worry about the length of the string
=SMALL(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)),2) determines the 2nd occurrence of the match
=LARGE(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)),2) determines the 2nd-to-last occurrence of the match
=MAX(IF(MID(I16,ROW($1:$99),2)=".t",ROW($1:$99))) matches a 2-character string **Make sure you change the last argument of the MID() function to the number of characters in the string you wish to match!
In newer versions of Excel (2013 and up) flash fill might be a simple and quick solution see: Using Flash Fill in Excel
.
For a string in A1 and substring in B1, use:
=XMATCH(B1,MID(A1,SEQUENCE(LEN(A1)),LEN(B1)),,-1)
Working from inside out, MID(A1,SEQUENCE(LEN(A1)),LEN(B1)) splits string A1 into a dynamic array of substrings, each the length of B1. To find the position of the last occurrence of substring B1, we use XMATCH with its Search_mode argument set to -1.
A simple way to do that in VBA is:
YourText = "c:\excel\text.txt"
xString = Mid(YourText, 2 + Len(YourText) - InStr(StrReverse(YourText), "\" ))
Very late to the party, but A simple solution is using VBA to create a custom function.
Add the function to VBA in the WorkBook, Worksheet, or a VBA Module
Function LastSegment(S, C)
LastSegment = Right(S, Len(S) - InStrRev(S, C))
End Function
Then the cell formula
=lastsegment(B1,"/")
in a cell and the string to be searched in cell B1 will populate the cell with the text trailing the last "/" from cell B1.
No length limit, no obscure formulas.
Only downside I can think is the need for a macro-enabled workbook.
Any user VBA Function can be called this way to return a value to a cell formula, including as a parameter to a builtin Excel function.
If you are going to use the function heavily you'll want to check for the case when the character is not in the string, then string is blank, etc.
If you're only looking for the position of the last instance of character "~" then
=len(substitute(String,"~",""))+1
I'm sure there is version that will work with the last instance of a string but I have to get back to work.
Cell A1 = find/the/position/of/the last slash
simple way to do it is reverse the text and then find the first slash as normal. Now you can get the length of the full text minus this number.
Like so:
=LEN(A1)-FIND("/",REVERSETEXT(A1),1)+1
This returns 21, the position of the last /
If I am having G4ED7883666 and I want the output to be 7883666
and I have to apply this on a range of cells and they are not the same length and the only common thing is that I have to delete anything before the number that lies before the alphabet?
This formula finds the last number in a string, that is, all digits to the right of the last alpha character in the string.
=RIGHT(A1,MATCH(99,IFERROR(1*MID(A1,LEN(A1)+1-ROW($1:$25),1),99),0)-1)
Note that this is an array formula and must be entered with the Control-Shift-Enter keyboard combination.
How the formula works
Let's assume that the target string is fairly simple: "G4E78"
Working outward from the middle of the formula, the first thing to do is create an array with the elements 1 through 25. (Although this might seem to limit the formula to strings with no more than 25 characters, it actually places a limit of 25 digits on the size of the number that may be extracted by the formula.
ROW($1:$25) = {1;2;3;4;5;6;7; etc.}
Subtracting from this array the value of (1 + the length of the target string) produces a new array, the elements of which count down from the length of string. The first five elements will correspond to the position of the characters of the string - in reverse order!
LEN(A1)+1-ROW($1:$25) = {5;4;3;2;1;0;-1;-2;-3;-4; etc.}
The MID function then creates a new array that reverses the order of the characters of the string.
For example, the first element of the new array is the result of MID(A1, 5, 1), the second of MID(A1, 4, 1) and so on. The #VALUE! errors reflect the fact that MID cannot evaluate 0 or negative values as the position of a string, e.g., MID(A1,0,1) = #VALUE!.
MID(A1,LEN(A1)+1-ROW($1:$25),1) = {"8";"7";"E";"4";"G";#VALUE!;#VALUE!; etc.}
Multiplying the elements of the array by 1 turns the character elements of that array to #VALUE! errors as well.
=1*MID(A1,LEN(A1)+1-ROW($1:$25),1) = {"8";"7";#VALUE!;"4";#VALUE!;#VALUE!;#VALUE!; etc.}
And the IFERROR function turns the #VALUES into 99, which is just an arbitrary number greater than the value of a single digit.
IFERROR(1*MID(A1,LEN(A1)+1-ROW($1:$25),1),99) = {8;7;99;4;99;99;99; etc.}
Matching on the 99 gives the position of the first non-digit character counting from the right end of the string. In this case, "E" is the first non-digit in the reversed string "87E4G", at position 3. This is equivalent to saying that the number we are looking for at the end of the string, plus the "E", is 3 characters long.
MATCH(99,IFERROR(1*MID(A1,LEN(A1)+1-ROW($1:$25),1),99),0) = 3
So, for the final step, we take 3 - 1 (for the "E) characters from the right of string.
RIGHT(A1,MATCH(99,IFERROR(1*MID(A1,LEN(A1)+1-ROW($1:$25),1),99),0)-1) = "78"
One more submission for you to consider. This VBA function will get the right most digits before the first non-numeric character
Public Function GetRightNumbers(str As String)
Dim i As Integer
For i = Len(str) To 0 Step -1
If Not IsNumeric(Mid(str, i, 1)) Then
Exit For
End If
Next i
GetRightNumbers = Mid(str, i + 1)
End Function
You can write some VBA to format the data (just starting at the end and working back until you hit a non-number.)
Or you could (if you're happy to get an addin like Excelicious) then you can use regular expressions to format the text via a formula. An expression like [0-9]+$ would return all the numbers at the end of a string IIRC.
NOTE: This uses the regex pattern in James Snell's answer, so please upvote his answer if you find this useful.
Your best bet is to use a regular expression. You need to set a reference to VBScript Regular Expressions for this to work. Tools --> References...
Now you can use regex in your VBA.
This will find the numbers at the end of each cell. I am placing the result next to the original so that you can verify it is working the way you want. You can modify it to replace the cell as soon as you feel comfortable with it. The code works regardless of the length of the string you are evaluating, and will skip the cell if it doesn't find a match.
Sub GetTrailingNumbers()
Dim ws As Worksheet
Dim rng As Range
Dim cell As Range
Dim result As Object, results As Object
Dim regEx As New VBScript_RegExp_55.RegExp
Set ws = ThisWorkbook.Sheets("Sheet1")
' range is hard-coded here, but you can define
' it programatically based on the shape of your data
Set rng = ws.Range("A1:A3")
' pattern from James Snell's answer
regEx.Pattern = "[0-9]+$"
For Each cell In rng
If regEx.Test(cell.Value) Then
Set results = regEx.Execute(cell.Value)
For Each result In results
cell.Offset(, 1).Value = result.Value
Next result
End If
Next cell
End Sub
Takes the first 4 digits from the right of num:
num1=Right(num,4)
Takes the first 5 digits from the left of num:
num1=Left(num,5)
First takes the first ten digits from the left then takes the first four digits from the right:
num1=Right(Left(num, 10),4)
In your case:
num=G4ED7883666
num1=Right(num,7)
I have a sheet with a list of names in Column B and an ID column in A. I was wondering if there is some kind of formula that can take the value in column B of that row and generate some kind of ID based on the text? Each name is also unique and is never repeated in any way.
It would be best if I didn't have to use VBA really. But if I have to, so be it.
Solution Without VBA.
Logic based on First 8 characters + number of character in a cell.
= CODE(cell) which returns Code number for first letter
= CODE(MID(cell,2,1)) returns Code number for second letter
= IFERROR(CODE(MID(cell,9,1)) If 9th character does not exist then return 0
= LEN(cell) number of character in a cell
Concatenating firs 8 codes + adding length of character on the end
If 8 character is not enough, then replicate additional codes for next characters in a string.
Final function:
=CODE(B2)&IFERROR(CODE(MID(B2,2,1)),0)&IFERROR(CODE(MID(B2,3,1)),0)&IFERROR(CODE(MID(B2,4,1)),0)&IFERROR(CODE(MID(B2,5,1)),0)&IFERROR(CODE(MID(B2,6,1)),0)&IFERROR(CODE(MID(B2,7,1)),0)&IFERROR(CODE(MID(B2,8,1)),0)&LEN(B2)
Sorry, I didn't found a solution with formula only even if this thread might help (trying to calculate the points in a scrabble game) but I didn't find a way to be sure the generated hash would be unique.
Yet, here is my solution, based on a UDF (Used-Defined Function):
Put the code in a module:
Public Function genId(ByVal sName As String) As Long
'Function to create a unique hash by summing the ascii value of each character of a given string
Dim sLetter As String
Dim i As Integer
For i = 1 To Len(sName)
genId = Asc(Mid(sName, i, 1)) * i + genId
Next i
End Function
And call it in your worksheet like a formula:
=genId(A1)
[EDIT] Added the * i to take into account the order. It works on my unit tests
May be OTT for your needs, but you can use a call to CoCreateGuid to get a real GUID
Private Declare Function CoCreateGuid Lib "ole32" (ID As Any) As Long
Function GUID() As String
Dim ID(0 To 15) As Byte
Dim i As Long
If CoCreateGuid(ID(0)) = 0 Then
For i = 0 To 15
GUID = GUID & Format(Hex$(ID(i)), "00")
Next
Else
GUID = "Error while creating GUID!"
End If
End Function
Test using
Sub testGUID()
MsgBox GUID
End Sub
How to best implement depends on your needs. One way would be to write a macro to get a GUID populate a column where names exist. (note, using it as a udf as is is no good, since it will return a new GUID when recalculated)
EDIT
See this answer for creating a SHA1 hash of a string
Do you just want an incrementing numeric id column to sit next to your values? If so, and if your values will always be unique, you can very easily do this with formulae.
If your values were in column B, starting in B2 underneath your headers for example, in A2 you would type the formula "=IF(B2="","",1+MAX(A$1:A1))". You can copy and paste that down as far as your data extends, and it will increment a numeric identifier for each row in column B which isn't blank.
If you need to do anything more complicated, like identify and re-identify repeating values, or make identifiers 'freeze' once they're populated, let me know. Currently, when you clear or add values to your list the identifers will toggle themselves up and down, so you need to be careful if your data changes.
Unique identifier based on the number of specific characters in text. I used an identifier based on vowels and numbers.
=LEN($J$14)-LEN(SUBSTITUTE($J$14;"a";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"e";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"i";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"j";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"o";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"u";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"y";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"1";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"2";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"3";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"4";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"5";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"6";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"7";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"8";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"9";""))&LEN($J$14)-LEN(SUBSTITUTE($J$14;"0";""))
You say you are confident that there are no duplicate values in your words. To push it further, are you confident that the first 8 characters in any word would be unique?
If so, you can use the below formula. It works by individually taking each character's ASCII code - 40 [assuming normal characters, this puts numbers at between 8 & 57, and letters at between 57 & 122], and multiplying that characters code by 10 ^ [that character's digit placement in the word]. Basically it takes that character code [-40], and concatenates each code onto the next.
EDIT Note that this code no longer requires that at least 8 characters exist in your word to prevent an error, as the actual word to be coded has 8 "0"'s appended to it.
=TEXT(SUM((CODE(MID(LOWER(RIGHT(REPT("0",8)&A3,8)),{1,2,3,4,5,6,7,8},1))-40)*10^{0,2,4,6,8,10,12,14}),"#")
Note that as this uses the ASCII values of the characters, the ID # could be used to identify the name directly - this does not really create anonymity, it just turns 8 unique characters into a unique number. It is obfuscated with the -40, but not really 'safe' in that sense. The -40 is just to get normal letters and numbers in the 2 digit range, so that multiplying by 10^0,2,4 etc. will create a 2 digit unique add-on to the created code.
EDIT FOR ALTERNATIVE METHOD
I had previously attempted to do this so that it would look at each letter of the alphabet, count the number of times it appears in the word, and then multiply that by 10*[that letter's position in the alphabet]. The problem with doing this (see comment below for formula) is that it required a number of 10^26-1, which is beyond Excel's floating point precision. However, I have a modified version of that method:
By limiting the number of allowed characters in the alphabet, we can get the max total size possible to 10^15-1, which Excel can properly calculate. The formula looks like this:
=RIGHT(REPT("0",15)&TEXT(SUM(LEN(A3)*10^{0,1,2,3,4,5,6,7,8,9,10,11,12,13,14}-LEN(SUBSTITUTE(A3,MID(Alphabet,{1,2,3,4,5,6,7,8,9,10,11,12,13,14,15},1),""))*10^{0,1,2,3,4,5,6,7,8,9,10,11,12,13,14}),"#"),15)
[The RIGHT("00000000000000"... portion of the formula is meant to keep all codes the same number of characters]
Note that here, Alphabet is a named string which holds the characters: "abcdehilmnorstu". For example, using the above formula, the word "asdf" counts the instances of a, s, and d, but not 'f' which isn't in my contracted alphabet. The code of "asdf" would be:
001000000001001
This only works with the following assumptions:
The letters not listed (nor numbers / special characters) are not required to make each name unique. For example, asdf & asd would have the same code in the above method.
And,
The order of the letters is not required to make each name unique. For example, asd & dsa would have the same code in the above method.