Is it possible to configure the 'Publish' action such that it copies the generated documentation XML together with the freshly built binaries etc.?
The utility of the 'Publish' action is greatly diminished if I then have to go and poke around in the trees of garbage directories in order to hunt down the XML file and copy it to the target location ...
Related
Due to the buggy nature of InstallShield, it is incorrectly modifying my app.config files replacing <clear /> with <clear></clear>
After my app.config file is copied to install path, I want to run a custom action that can scan for all config files and do a standard find and replace.
I don't need code for the find and replace, what I want to know is how / where to put this custom action using Installshield?
Your best bet would be creating a deferred execution custom action and place it near the end of the execution sequence. This will guarantee it would run after the files have been installed.
In the 'Custom Actions and Sequences', Create a new custom action of the appropriate type (depending on your implementation of this replacement action). Set it's In-Script Execution to 'Deferred' and in the Sequence section have add it to the Install Exec Sequence, After ScheduleReboot.
The easiest way to modify config/ini files after deployment of files is the option of INI File Changes or Text File Changes under the System Configuration tab. You can mention the config file location and the replacement changes that you want to perform. Please refer this link.
In Lotuscript you can manipulate design elements - create them, change them, rename them, etc.
Are you able to do the same thing for Xpages and custom controls design elements?
====================================================================
My question should have been clearer. What I want to accomplish is to copy an existing cc and give it a new name, programatically. The app will then close and reopen (or refresh or get rebuilt) so that the app can "see" the new cc. If I copy the cc it will only have one field on it. I will add custom code later. I could just create a new cc with no code in it, that would work too.
I am not familiar with the DXL exporter but I can research it. Using that can I just export the design of the cc to an XML file in a temp directory, use the transform to change the name, and then import the control?
I think the XPage or Custom Control design elements are probably under MISC_CODE or MISC_FORMAT design elements in a NoteCollection.
However, accessing that design element is the easy part. Doing a create / rename / change etc is a much bigger task.
Remember that the XPage or Custom Control XML file is only a starting point:
XPages and Custom Controls also have a .xsp.metadata file, as you'll see with source control.
Custom Controls will also have (and need) a .xsp-config file.
There are corresponding .java files for every XPage and Custom Control in the Local source folder. They're created by a builder based on parsing the XML. I don't think you'll be able to create those programmatically. I'm not sure of the impact of renaming them.
For Custom Controls, even if you can rename the .java file, it's referenced in the .java files of relevant XPages. Updating those is goiong to be a significant task.
The XPages runtime doesn't even use those .java files. Instead it uses the .class files in WebContent\WEB-INF (you need to use Project Explorer view and modify the filter to see those files). This is compiled byte code, so you won't be able to update the .class files for XPages containing renamed Custom Controls, as far as I know.
Even if you can rename the .class files, the XPages runtime almost certainly won't use them until either a Clean (which will overwrite anything you've done) or an HTTP restart. As far as I can tell they're cached.
Depending on your use cases, it's possible not all these points will be an issue, e.g. if you're modifying the XML files and building with headless designer.
I suspect this is why nothing was added to the NoteCollection object or a specific NotesXPage / NotesCustomControl API class added.
In Lotuscript you can manipulate design elements - create them, change them, rename them, etc.
This is only partially true. There is a LS API to create/alter views and outlines. Good luck with other design elements - although they're standard "notes", so you can access their items, in most cases you won't compile them and there will be some problems with signatures (real experience with TeamStudio CIAO).
Your question has two points of view - do you want to alter design elements in design process or alter running application?
To help a designer you can go the way of Eclipse extensions and enrich tools in IBM Designer to help developer. Something like TeamStudio Designer. In this case you need to look for source design elements, mentioned by Paul.
To enrich application you don't need to alter source design elements. IBM Designer transforms XML in source code to a Java code (JSF framework) - so you can generate your Java code from anything you wish. Take a look inside Local\xsp folder of NSF in Package explorer. You will find Java sources made from your XPages and Custom Controls. So if you don't need to work with design elements, go for Java components - they can be built on the fly.
And of course, there is always the option of DXL framework - so you can clone/alter design of the application through XML transformations. Good starting point: http://www-10.lotus.com/ldd/ddwiki.nsf/dx/ls-design-programming.htm
Consider a solution has 2 projects: ProjectA and ProjectB (both are MonoTouch apps) and ProjectBase. ProjectBase contains the whole application, but Main.cs file (with the entry point) is located in ProjectA and ProjectB (which reference ProjectBase). This way, running any of A/B projects will boot up the application from ProjectBase.
Now, I want to override something for ProjectA only (it might be XIB file, image or a .NET class). Is there any way I can setup the solution so that the code and resources, produced by ProjectBase, are merged with the ones from ProjectA/ProjectB and the latter wins?
I found (probably a quirky and kinda-undefined-behavior-driven way) of overriding XIBs: I just put a XIB into ProjectA and ProjectB, name it the same as it was named in ProjectBase and them exclude it from ProjectBase. Although MonoDevelop compiles all items, it seems that the startup project's XIBs get priority, so that I see ProjectA-specific XIBs when I launch ProjectA and ProjectB-specific XIBs when I launch ProjectB. However, I am not sure it is the way it should behave, plus, from what I can see from build log, ALL projects get built yielding resources at the end.
P.S. I'm sorry if this has been asked previously, but I was not able to find the similar question on SO.
I was once trying to do this for a bunch of apps. I would have thought build order would be ProjectBase and then ProjectA, and the content copy system would be the same... Guess this means we are wrong.
You could do a few things.
A) Build your own program to copy resources which are marked for content. Would not be very hard, just need to read the .csproj files. XML parsing is easy enough in .NET. Run this program on post build. Would just have to be careful when doing builds such as to zip or to the device as I am not sure how it handles post-build events.
B) [This is what I did instead] If I expect to also make ProjectC, ProjectD ... ProjectN I instead made a program to generate my program... (Programception).
What it does, has ProjectBase, and ProjectTempalte. You enter your new project name into this program, say, "MyNewProject" and it will create the correct folder structure, write the correct csproj files, and update SLN file. ProjectTemplate has various placeholders in .csproj files like {PLACEHOLDER} which Programception would just go through and find/replace with my project name. Image files (and in your case XIB) are then only kept within ProjectA (B..C..N) unless I do not expect to try and override them in which case they would stay in ProjectBase. This is a lot easier with a XIBless application I would assume. I never use XIB's anyway.
Hope that helps!
I have build that produces a (NCover 3.4 Summary) html report.
I'd like to configure the Dashboard to show the html report.
The report is produced perfectly in working folder during the build - my problem is referencing the report from the Dashboard. Should I do something to store it from working folder into the 'cc.net build records'? I don't really understand the inner workings there...
My use of plugin in the Dashboard.config is shown below. I don't know what I should use actionName for and have left it with value from documentation.
The link in CC.Net resolves as: http://DummyServerName/ccnet/server/local/project/DummyProject/build/log20101221100723Lbuild.2.0.0.176.xml/viewReport.aspx
Thanks for any comments,
Anders, Denmark
<htmlReportPlugin description="NCover Summary" actionName="viewReport" htmlFileName="coverage_summary.html" />
From the CCNET Documentation [1] :
This plug-in can display any file that
is in the build folder under artefacts
folder for the project. It cannot
display files from any other location
(for security reasons). Files can be
published to a build folder using the
File Merge Task. This will
automatically generate the correct
folder structure for the HTML reports.
Either way, you can generate an xml report, merge it into the ccnet log and use an xsl to display it in the dashboard/emails.[2]
[1] http://build.nauck-it.de/doc/CCNET/HTML%20Report%20Plugin.html
[2] http://docs.ncover.com/how-to/continuous-integration/cruisecontrol-net/
Is there a possibility to add directory (with sub directories) to SupportFiles section in installshield. I have dynamically created content (list of files changes constantly) that I use to support my installation.
Is there any other method to add dynamically whole directory to installation package. I need files from this directory only during installation process. At the end of the installation I want IS to remove these files automatically ?
The ISSetupFile table ( which drives the Support Files pattern ) only supports extracting files to a single directory. There is no way in the UI to tell it to be dynamic although you could have a build automation step that reflects the contents of a directory and wires it up to the table using the automation interface. This still couldn't do sub directories though.
What you probably want to do is creating a self-extracting zip of the files you need as part of your build and add that EXE to Support Files. Then write custom actions that call the EXE to extract the payload to Support Files and another CA to clean it up. Look for the custom action ISSetupFilesExtract and ISSetupFilesCleanup to figure out the best way to do this.
Although I'm late to the party: #BuvinJ mentioned in a comment that you can add directories to "Advanced Files" under "Disk1." In this case, they do appear in the temporary directory (support directory), eg. SUPPORTDIR\Disk1
SUPPORTDIR is a temporary location where the installer dumps files, and cleans them up afterward. An example is C:\Users\<your user name>\AppData\Local\Temp\2\{F6B9B2D6-2A5A-4146-9297-E80A199CB0CB}.
This could be a quicker/cheaper/faster solution to writing custom actions and/or packaging up files by hand in, say, a self-extracting zip file.