How to resolve this error specially on macbook. I have installed docker on my machine also but its not working.
You have to start docker deamon on your gitlab runner.
Below is link to docker desktop for mac.
If you start docker desktop gui, docker deamon will start.
https://docs.docker.com/desktop/mac/
This problem is not just for mac computers but also for windows. I experienced this problem and found out that the the PowerShell script part for Infra as Code that I was using was not installing docker.
I therefore made changes to the Infra as Code to ensure that Microsoft-Hyper-V is enabled and that docker is actually installed and docker service started, then the computer HAS to be restarted for the changes to pick up.
I do not know the exact order of when the restart should happen since I am still understanding the flow but I can update my answer when I have more info
I have compiled my code using typescript and run it in my laptop using node server.
Now when i deploy it in windows IIS server in another machine, do i require node server that machine?
Node is just for development and not for hosting?
Can you clarify my doubts?
YES. you need node server in the other machine as well in the machine in which you are deploying the code
As far as I know, if you want to host node.js application, you should firstly install the node.exe and the a build of iisnode.
https://nodejs.org/en/#download
https://github.com/tjanczuk/iisnode
After installed the IIS nodes, you could set up samples, from the administrative command prompt call %programfiles%\iisnode\setupsamples.bat.
Then you could go to http://localhost/node to see the example.
More details, you could refer to below article:
https://www.hanselman.com/blog/InstallingAndRunningNodejsApplicationsWithinIISOnWindowsAreYouMad.aspx
Learning how to deploy the demo project to IBM API Connect on Bluemix (get-started) and get the following errors after run apic edit to start IBM Developer Toolkit local site:
Screenshot of the error
Any suggestions will be appreciated.
Just tried the same and I am not able to reproduce the issue, since the "apic edit" step works fine for me. I guess this is an issue related to your machine. The error is quite clear and it means that Express.js is not able to connect to that port. The first step is to check that port to see if it's blocked by the host system. However I see different ports in the error message, so the problem could be different (check your firewall settings). Moreover, I would try to install apic again running sudo npm install -g apiconnect and double check that the prerequisites are already installed. It could be throwing an error that you didn't notice.
Try publish in the interface 0.0.0.0:
export HOST=0.0.0.0
apic edit
I'm trying to put in production my shiny app. I can run my shiny app locally on my Windows machine, from R. However, since we need to use Linux to deploy the app over the web, we decided to use a Linux server for that. We access this Linux server remotely, from our local machines (running Windows).
I followed the instruction at the RStudio website, and successful installed Shine Server on the Linux server. Its's running on it. I don't know what to do next. So, my question is: what should I do next? Please, remember that I access the Linux server remotely (using puty). Also, I have almost no knowledge of Linux.
Any guidance on what to do next is very welcome.
Some info that may be useful:
I use a Ubuntu 12.04.3
I ran as root (I think, but I can use sudo, for sure).
Another person has access to this server besides me.
We use R 3.0.2
you can follow the instructions here:
https://groups.google.com/forum/#!msg/shiny-discuss/NuZp0ziVXvw/BXHcIoXThnoJ
Short answer:
# this is all one line
sudo wget\
https://raw.github.com/rstudio/shiny-server/master/config/upstart/shiny-server.conf\
-O /etc/init/shiny-server.conf
# Start the server
sudo start shiny-server
Then just open a browser and point to it
Does Meteor support developing on Windows? I did not see any downloads or mention of Windows in the docs.
The "Quick Start" assumes you are on *Nix OS.
Meteor 1.1+: official Windows support launched on https://win.meteor.com/
Meteor 1.0+: there is an official Windows preview.
Meteor 0.8 and older: see http://win.meteor.com/
Proof, Meteor running on Windows.
Edit: See Tom's answer.
Old answer below.
No, this is not yet supported on windows. If you try to install in you will receive the following error:
Sorry, this OS is not supported yet.
As a workaround you can run a linux box in a VM and use that as a server to run meteor but still do all development from within windows. I've done this using VirtualBox to run Ubuntu with no GUI. Here's the steps:
Install VirtualBox
Grab Ubuntu ISO
Setup Ubuntu VM using VirtualBox (just follow the wizard steps)
Install samba on VM to enable file access from windows. This article was a great help.
Install ssh using Ubuntu Software Center. This was helpful.
Shutdown VM and run from a DOS prompt using vboxheadless -startvm "VM Name"
You can then use a ssh client (I'm using cygwin) to connect to the box to run commands e.g. ssh user#box_ip_address
Can browse and edit files using windows file share e.g. \\box_ip_address\share
Can run meteor apps within local browser, just replace the localhost in the address that meteor assigns with the ip address of the box.
I just tried to install it with curl on Windows 7, and got:
Sorry, this OS is not supported yet.
A substantial update as the existing answers to this question are very out of date.
Official Windows support can be found at https://github.com/meteor/meteor/wiki/Preview-of-Meteor-on-Windows
Unofficial Windows support for Meteor can be found on http://win.meteor.com/
There are 3 solutions outlined on win.meteor.com, one native MSI installer, and 2 virtualized solutions based on Vagrant:
1) MSI Installer:
Stephen Darnell has picked up where Tom Wijsman graciously left off.
This solution is the most straight forward way to get Meteor running
on Windows with an MSI Installer provided. There are some trade-offs
because this is a fork and can lag behind the latest version as
Stephen can update to and test the latest version.
2) Vagrant Shell Provisioning
Gabriel Pugliese has posted a guide for how to provision Meteor on
Linux with Vagrant's Shell Provisioning. These may be more accessible
to users familier with Linux and Shell scripts. This solution is
easier to tweak through the straight forward shell commands than the
Chef alternative.
3) Vagrant Chef Provisioning
Matthew Sullivan is maintaining a set of Vagrant files, Chef cookbook,
and guide for provisioning Meteor on Linux with Vagrant. This Chef
solution is a slightly more automated and configurable than the shell
solution, however likely not as simple to tweak beyond the provided
configuration parameters as the Shell solution.
GitHub Repos and details can be found on win.meteor.com. The three authors are very responsive on the Meteor-talk Google Group.
A bit of history:
Unofficial Windows support for Meteor was started by Tom Wijsman, and was supported by Tom until 0.5.9. Versions 0.6.0 and later are by Stephen Darnell, Gabriel Pugliese, and Matt Sullivan.
I do not see Nitrous.io mentioned here.
I am using Nitrous.io together with Nitrous Desktop, which allows you to use your favourite text editor (in my case, Sublime Text).
There is a quick tutorial here and Discover Meteor also deals with this in chapter 2.
It sounds like Windows is not supported yet. If you want to play with it, I would suggest grabbing VirtualBox and installing your favorite flavor of Linux on it.
I downloaded the above .msi installer and installed to c:\Meteor
Add the c:\Meteor directory you just made to your PATH environment variable.
Run the following command: npm install Meteor-Test-Installer
Add the C:\Meteor\bin\node_modules\npm\bin directory you just made to your PATH environment variable.
Log below from my DOS screen:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\mike>cd\
C:\>cd meteor
C:\Meteor>cd C:\Meteor\bin\node_modules\npm\bin
C:\Meteor\bin\node_modules\npm\bin>meteor create try-meteor
try-meteor: created.
To run your new app:
cd try-meteor
meteor
C:\Meteor\bin\node_modules\npm\bin>curl
‘curl’ is not recognized as an internal or external command,
operable program or batch file.
C:\Meteor\bin\node_modules\npm\bin>cd try-meteor
C:\Meteor\bin\node_modules\npm\bin\try-meteor>meteor
[[[[[ C:\Meteor\bin\node_modules\npm\bin\try-meteor ]]]]]
Initializing mongo database… this may take a moment.
Running on: http://localhost:3000/
Open http://localhost:3000/ in broswer ... Voila !!
Hello World!
Welcome to try-meteor.
If you get error like this below :
{
[[[[[ D:\sms\Apps\Meteor\bin\node_modules\npm\bin\try-meteor ]]]]]
Unexpected mongo exit code 127. Restarting.
Unexpected mongo exit code 127. Restarting.
////////////////////////////////////////
////////////////////////////////////////
meteor is out of date. Please run:
meteor update
////////////////////////////////////////
////////////////////////////////////////
Unexpected mongo exit code 127. Restarting.
Can't start mongod. Check for other processes listening on port 3002 or other me
teors running in the same project.
}
Update the MondoDB folder with the latest mogodb files from the mongodb site.
I've found that new coders who are also new to Meteor might have installed it correctly, but are having trouble figuring out how to open and run it. So I'll just address that issue in this post.
1) I assume you went here: http://win.meteor.com/ and downloaded the MSI installer
2) I assume you then created a newapp in meteor and then ran meteor
3) If steps 1 & 2 are complete, you should see this in your command line:
Initializing mongo database... this may take a moment.
=> Meteor server running on: http://localhost:3000/
4) Open Chrome and type in the local host address: http://localhost:3000/
5) Open your newapp folder - should be located in your Meteor folder wherever its installed on your hard drive
6) Open your newapp.html, newapp.css, and newapp.js files in your favorite editor (like Sublime Text 2)
7) Begin editing these files as you like and watch your page automatically update, as Meteor is designed to do.
Voila!! You're building with Meteor. Enjoy!!
As of two days ago, a preview version is available here:
https://github.com/meteor/meteor/wiki/Preview-of-Meteor-on-Windows
Recent check of their site and checking their FAQ, you'll find the Meteor Development Roadmap. They host it on Trello and after the 1.0 launch, you'll see "Official Windows Support." So, it's on the map - now we wait!
https://trello.com/board/meteor-roadmap/508721606e02bb9d570016ae
Using linux in VM you probably want meteorite which isn't easy if you are as bad as I am to Linux... Here's how (thank you johntday Unable to install meteorite on Ubuntu VM):
Here are my Install Steps
Update and Upgrade your Ubuntu Depending on how up-to-date your image is, this may take a while.
sudo apt-get update && sudo apt-get upgrade
Install curl sudo apt-get install curl
Install node http://lucidservices.com/2013/09/17/install-node-on-ubuntu/
Install meteor curl https://install.meteor.com | sh
Install meteorite sudo -H npm install -g meteorite
If you have problems setting a high screen resolution, here's a fix:
http://youtu.be/t36wXUu1UtQ