the .gitlab-ci.yml file is
stages: # List of stages for jobs, and their order of execution
- build
build-job: # This job runs in the build stage, which runs first.
stage: build
script:
- echo "hello world"
tags:
- cpu
I run the gitlab-runner (10.5.0) on a specific runner (ubuntu 18.04), it work successfully when I use run command:
sudo gitlab-runner run
but failed when I use start (or restart)
sudo gitlab-runner start
No trace info on either mode.
I've been trying to setup a CI/CD Pipeline on my Repo which runs common tasks like linting/tests etc. I've successfully setup a Gitlab-Runner which is working fine. The only part I'm stuck is the "deploy" part.
When I run my build, how do I actually get the files into my /var/www/xyz folder.
I get that everything is running in a Docker Container and I can't just magically copy paste my files there, but i don't get how I get the files on my actual server-directory. I've been searching for days for good docs / explanations, so as always, StackOverflow is my last resort for help.
I'm running on a Ubuntu 20.04 LTS VPS and a SaaS GitLab-Repository if that info is needed. That's my .gitlab-ci.yml:
image: timbru31/node-alpine-git
before_script:
- git fetch origin
stages:
- setup
- test
- build
- deploy
#All Setup Jobs
Install Dependencies:
stage: setup
interruptible: true
script:
- npm install
- npm i -g #nrwl/cli
artifacts:
paths:
- node_modules/
# All Test Jobs
Lint:
stage: test
script: npx nx run nx-fun:lint
Tests:
stage: test
script: npx nx run nx-fun:test
Deploy:
stage: build
script:
- ls /var/www/
- npx nx build --prod --output-path=dist/
- cp -r dist/* /var/www/html/neostax/
only:
refs:
- master
Normally I would ssh into my server, run the build, and then copy the build to the corresponding web-directory.
TL;DR - How do I get files from a GitLab-Runner to an actual directory on the server?
If a GitLab project is configured on GitLab CI, is there a way to run the build locally?
I don't want to turn my laptop into a build "runner", I just want to take advantage of Docker and .gitlab-ci.yml to run tests locally (i.e. it's all pre-configured). Another advantage of that is that I'm sure that I'm using the same environment locally and on CI.
Here is an example of how to run Travis builds locally using Docker, I'm looking for something similar with GitLab.
Since a few months ago this is possible using gitlab-runner:
gitlab-runner exec docker my-job-name
Note that you need both docker and gitlab-runner installed on your computer to get this working.
You also need the image key defined in your .gitlab-ci.yml file. Otherwise won't work.
Here's the line I currently use for testing locally using gitlab-runner:
gitlab-runner exec docker test --docker-volumes "/home/elboletaire/.ssh/id_rsa:/root/.ssh/id_rsa:ro"
Note: You can avoid adding a --docker-volumes with your key setting it by default in /etc/gitlab-runner/config.toml. See the official documentation for more details. Also, use gitlab-runner exec docker --help to see all docker-based runner options (like variables, volumes, networks, etc.).
Due to the confusion in the comments, I paste here the gitlab-runner --help result, so you can see that gitlab-runner can make builds locally:
gitlab-runner --help
NAME:
gitlab-runner - a GitLab Runner
USAGE:
gitlab-runner [global options] command [command options] [arguments...]
VERSION:
1.1.0~beta.135.g24365ee (24365ee)
AUTHOR(S):
Kamil Trzciński <ayufan#ayufan.eu>
COMMANDS:
exec execute a build locally
[...]
GLOBAL OPTIONS:
--debug debug mode [$DEBUG]
[...]
As you can see, the exec command is to execute a build locally.
Even though there was an issue to deprecate the current gitlab-runner exec behavior, it ended up being reconsidered and a new version with greater features will replace the current exec functionality.
Note that this process is to use your own machine to run the tests using docker containers. This is not to define custom runners. To do so, just go to your repo's CI/CD settings and read the documentation there. If you wanna ensure your runner is executed instead of one from gitlab.com, add a custom and unique tag to your runner, ensure it only runs tagged jobs and tag all the jobs you want your runner to be responsible of.
I use this docker-based approach:
Edit: 2022-10
docker run --entrypoint bash --rm -w $PWD -v $PWD:$PWD -v /var/run/docker.sock:/var/run/docker.sock gitlab/gitlab-runner:latest -c 'git config --global --add safe.directory "*";gitlab-runner exec docker test'
For all git versions > 2.35.2. You must add safe.directory within the container to avoid fatal: detected dubious ownership in repository at.... This also true for patched git versions < 2.35.2. The old command will not work anymore.
Details
0. Create a git repo to test this answer
mkdir my-git-project
cd my-git-project
git init
git commit --allow-empty -m"Initialize repo to showcase gitlab-runner locally."
1. Go to your git directory
cd my-git-project
2. Create a .gitlab-ci.yml
Example .gitlab-ci.yml
image: alpine
test:
script:
- echo "Hello Gitlab-Runner"
3. Create a docker container with your project dir mounted
docker run -d \
--name gitlab-runner \
--restart always \
-v $PWD:$PWD \
-v /var/run/docker.sock:/var/run/docker.sock \
gitlab/gitlab-runner:latest
(-d) run container in background and print container ID
(--restart always) or not?
(-v $PWD:$PWD) Mount current directory into the current directory of the container - Note: On Windows you could bind your dir to a fixed location, e.g. -v ${PWD}:/opt/myapp. Also $PWD will only work at powershell not at cmd
(-v /var/run/docker.sock:/var/run/docker.sock) This gives the container access to the docker socket of the host so it can start "sibling containers" (e.g. Alpine).
(gitlab/gitlab-runner:latest) Just the latest available image from dockerhub.
4. Execute with
Avoid fatal: detected dubious ownership in repository at... More info
docker exec -it -w $PWD gitlab-runner git config --global --add safe.directory "*"
Actual execution
docker exec -it -w $PWD gitlab-runner gitlab-runner exec docker test
# ^ ^ ^ ^ ^ ^
# | | | | | |
# (a) (b) (c) (d) (e) (f)
(a) Working dir within the container. Note: On Windows you could use a fixed location, e.g. /opt/myapp.
(b) Name of the docker container
(c) Execute the command "gitlab-runner" within the docker container
(d)(e)(f) run gitlab-runner with "docker executer" and run a job named "test"
5. Prints
...
Executing "step_script" stage of the job script
$ echo "Hello Gitlab-Runner"
Hello Gitlab-Runner
Job succeeded
...
Note: The runner will only work on the commited state of your code base. Uncommited changes will be ignored. Exception: The .gitlab-ci.yml itself does not have be commited to be taken into account.
Note: There are some limitations running locally. Have a look at limitations of gitlab runner locally.
I'm currently working on making a gitlab runner that works locally.
Still in the early phases, but eventually it will become very relevant.
It doesn't seem like gitlab want/have time to make this, so here you go.
https://github.com/firecow/gitlab-runner-local
If you are running Gitlab using the docker image there: https://hub.docker.com/r/gitlab/gitlab-ce, it's possible to run pipelines by exposing the local docker.sock with a volume option: -v /var/run/docker.sock:/var/run/docker.sock. Adding this option to the Gitlab container will allow your workers to access to the docker instance on the host.
The GitLab runner appears to not work on Windows yet and there is an open issue to resolve this.
So, in the meantime I am moving my script code out to a bash script, which I can easily map to a docker container running locally and execute.
In this case I want to build a docker container in my job, so I create a script 'build':
#!/bin/bash
docker build --pull -t myimage:myversion .
in my .gitlab-ci.yaml I execute the script:
image: docker:latest
services:
- docker:dind
before_script:
- apk add bash
build:
stage: build
script:
- chmod 755 build
- build
To run the script locally using powershell I can start the required image and map the volume with the source files:
$containerId = docker run --privileged -d -v ${PWD}:/src docker:dind
install bash if not present:
docker exec $containerId apk add bash
Set permissions on the bash script:
docker exec -it $containerId chmod 755 /src/build
Execute the script:
docker exec -it --workdir /src $containerId bash -c 'build'
Then stop the container:
docker stop $containerId
And finally clean up the container:
docker container rm $containerId
Another approach is to have a local build tool that is installed on your pc and your server at the same time.
So basically, your .gitlab-ci.yml will basically call your preferred build tool.
Here an example .gitlab-ci.yml that i use with nuke.build:
stages:
- build
- test
- pack
variables:
TERM: "xterm" # Use Unix ASCII color codes on Nuke
before_script:
- CHCP 65001 # Set correct code page to avoid charset issues
.job_template: &job_definition
except:
- tags
build:
<<: *job_definition
stage: build
script:
- "./build.ps1"
test:
<<: *job_definition
stage: test
script:
- "./build.ps1 test"
variables:
GIT_CHECKOUT: "false"
pack:
<<: *job_definition
stage: pack
script:
- "./build.ps1 pack"
variables:
GIT_CHECKOUT: "false"
only:
- master
artifacts:
paths:
- output/
And in nuke.build i've defined 3 targets named like the 3 stages (build, test, pack)
In this way you have a reproducible setup (all other things are configured with your build tool) and you can test directly the different targets of your build tool.
(i can call .\build.ps1 , .\build.ps1 test and .\build.ps1 pack when i want)
I am on Windows using VSCode with WSL
I didn't want to register my work PC as a runner so instead I'm running my yaml stages locally to test them out before I upload them
$ sudo apt-get install gitlab-runner
$ gitlab-runner exec shell build
yaml
image: node:10.19.0 # https://hub.docker.com/_/node/
# image: node:latest
cache:
# untracked: true
key: project-name
# key: ${CI_COMMIT_REF_SLUG} # per branch
# key:
# files:
# - package-lock.json # only update cache when this file changes (not working) #jkr
paths:
- .npm/
- node_modules
- build
stages:
- prepare # prepares builds, makes build needed for testing
- test # uses test:build specifically #jkr
- build
- deploy
# before_install:
before_script:
- npm ci --cache .npm --prefer-offline
prepare:
stage: prepare
needs: []
script:
- npm install
test:
stage: test
needs: [prepare]
except:
- schedules
tags:
- linux
script:
- npm run build:dev
- npm run test:cicd-deps
- npm run test:cicd # runs puppeteer tests #jkr
artifacts:
reports:
junit: junit.xml
paths:
- coverage/
build-staging:
stage: build
needs: [prepare]
only:
- schedules
before_script:
- apt-get update && apt-get install -y zip
script:
- npm run build:stage
- zip -r build.zip build
# cache:
# paths:
# - build
# <<: *global_cache
# policy: push
artifacts:
paths:
- build.zip
deploy-dev:
stage: deploy
needs: [build-staging]
tags: [linux]
only:
- schedules
# # - branches#gitlab-org/gitlab
before_script:
- apt-get update && apt-get install -y lftp
script:
# temporarily using 'verify-certificate no'
# for more on verify-certificate #jkr: https://www.versatilewebsolutions.com/blog/2014/04/lftp-ftps-and-certificate-verification.html
# variables do not work with 'single quotes' unless they are "'surrounded by doubles'"
- lftp -e "set ssl:verify-certificate no; open mediajackagency.com; user $LFTP_USERNAME $LFTP_PASSWORD; mirror --reverse --verbose build/ /var/www/domains/dev/clients/client/project/build/; bye"
# environment:
# name: staging
# url: http://dev.mediajackagency.com/clients/client/build
# # url: https://stg2.client.co
when: manual
allow_failure: true
build-production:
stage: build
needs: [prepare]
only:
- schedules
before_script:
- apt-get update && apt-get install -y zip
script:
- npm run build
- zip -r build.zip build
# cache:
# paths:
# - build
# <<: *global_cache
# policy: push
artifacts:
paths:
- build.zip
deploy-client:
stage: deploy
needs: [build-production]
tags: [linux]
only:
- schedules
# - master
before_script:
- apt-get update && apt-get install -y lftp
script:
- sh deploy-prod
environment:
name: production
url: http://www.client.co
when: manual
allow_failure: true
The idea is to keep check commands outside of .gitlab-ci.yml. I use Makefile to run something like make check and my .gitlab-ci.yml runs the same make commands that I use locally to check various things before committing.
This way you'll have one place with all/most of your commands (Makefile) and .gitlab-ci.yml will have only CI-related stuff.
I have written a tool to run all GitLab-CI job locally without have to commit or push, simply with the command ci-toolbox my_job_name.
The URL of the project : https://gitlab.com/mbedsys/citbx4gitlab
Years ago I build this simple solution with Makefile and docker-compose to run the gitlab runner in docker, you can use it to execute jobs locally as well and should work on all systems where docker works:
https://gitlab.com/1oglop1/gitlab-runner-docker
There are few things to change in the docker-compose.override.yaml
version: "3"
services:
runner:
working_dir: <your project dir>
environment:
- REGISTRATION_TOKEN=<token if you want to register>
volumes:
- "<your project dir>:<your project dir>"
Then inside your project you can execute it the same way as mentioned in other answers:
docker exec -it -w $PWD runner gitlab-runner exec <commands>..
I recommend using gitlab-ci-local
https://github.com/firecow/gitlab-ci-local
It's able to run specific jobs as well.
It's a very cool project and I have used it to run simple pipelines on my laptop.
I am new to gitlab runner and trying to setup acceptance_stage after unit test passes.
The tests run on a windows machine when the job is triggered.
The job exits when tests pass, but the job stalls when test fails. I have only 1 test right now and I am planning to run multiple tests in parallel when this issue is fixed.
The test is triggered using maven command. (I have tweaked the test in such a way so that it fails.)The test fails on this command :
mvn verify -P rest-test-run -Denvironment="qa" -Dwebdriver.chrome.driver="C:\tools\chromedriver.exe"
and the job stalls and is unable to execute the next command.
Here is the sample yaml file that i am using to trigger acceptance stage:
stages:
- test
acceptance_tests:
stage: test
tags:
- playground
only:
- ci_cd_test
before_script:
- export POM_VERSION=$(mvn help:evaluate -Dexpression=project.version -q -DforceStdout)
- cd ..
- git clone "git#gitlab.<project>" "<automation project name>" 2> /dev/null || (cd "<automation project name>" ; git pull)
- cd <webapp project name>
- export DB_URL=jdbc url
- export DB_USER=username
- export DB_PASSWORD=password
variables:
GIT_STRATEGY: none
script:
# flyway migrates
- java -Dfile.encoding=UTF-8 -jar <webapp project name>/target/<webapp project name>-$POM_VERSION.jar flyway migrate
# Bring up the app
- ./start.sh
# Run cucumber test
- cd ../<automation project name>
- mvn verify -P rest-test-run -Denvironment="qa" -Dwebdriver.chrome.driver="C:\tools\chromedriver.exe"
- cd ../<webapp project name>
# Stop the app
- ./stop.sh
I have also attached a screen shot of the stalling job.
Some troubleshooting ideas that I tried implementing:
upgraded surefireplugin(the version that I use in 2.22.0)
added a cleanup_job in yaml file
ran tests not in parallel
the above ideas did not solve the problem.
I have a problem. I have two merge requests from two different branches to the master branch in a project.
Now I want to start an environment in GitLab for each merge request. I do this with a shell executor and I start docker container with docker run image_name where I mount the folder from the build process inside the container. Looks like this:
stages:
- deploy
deploy_stage:
stage: deploy
script:
- docker run -d --name ContainerName -v ${CI_PROJECT_DIR}:/var/www/html -e VIRTUAL_HOST=example.com php
environment:
name: review/$CI_COMMIT_REF_NAME
url: http://example.com
on_stop: stop_stage
tags:
- shell
except:
- master
stop_stage:
stage: deploy
variables:
GIT_STRATEGY: none
script:
- docker stop ContainerName
- docker rm ContainerName
when: manual
environment:
name: review/$CI_COMMIT_REF_NAME
action: stop
tags:
- shell
Now my problem is that one environment is runng and when a new job runs the checkout/code get overwritten by the new pipeline job and both environments have now the same code but they should be different.
Does anyone have a solution for me how I can configure the gitlab runner to have different checkout folder for each merge request?