I try to install the python for aws glue connectivity,
so I installed pip install --upgrade jupyter boto3 aws-glue-sessions.
I'm getting errors in this particular package.
Collecting pywinpty>=1.1.0 Using cached pywinpty-2.0.5.tar.gz (23 kB) Installing build dependencies ... done Getting requirements to build wheel ... done Preparing metadata (pyproject.toml) ... error error: subprocess-exited-with-error
× Preparing metadata (pyproject.toml) did not run successfully. │ exit code: 1 ╰─> [6 lines of output]
Cargo, the Rust package manager, is not installed or is not on PATH.
This package requires Rust and Cargo to compile extensions. Install it through
the system's package manager or via https://rustup.rs/
Checking for Rust toolchain....
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip. error: metadata-generation-failed
Found a solution online. Installing 64 bit Python resolved my issue. Check your installation with python -V -V, it should say 64 bit.
Related
whenever I try to install turicreate module on wsl it's showing an error like this
`Collecting turicreate
Using cached turicreate-6.4.tar.gz (1.9 kB)
Preparing metadata (setup.py) ... done
Using legacy 'setup.py install' for turicreate, since package 'wheel' is not installed.
Installing collected packages: turicreate
Running setup.py install for turicreate ... error
error: subprocess-exited-with-error
× Running setup.py install for turicreate did not run successfully.
│ exit code: 1
╰─> [30 lines of output]
running install
/root/turitest/venv/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
==================================================================================
TURICREATE ERROR
If you see this message, pip install did not find an available binary package
for your system.
Supported Platforms:
* macOS 10.12+ x86_64.
* Linux x86_64 (including WSL on Windows 10).
Support Python Versions:
* 2.7
* 3.5
* 3.6
* 3.7
* 3.8
Another possible cause of this error is an outdated pip version. Try:
`pip install -U pip`
==================================================================================
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> turicreate
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.
`
pip version - 22.0.2
python3.10 (I guess this maybe the problem, but I'm not sure)
windows10 OS
can someone help me to install turicreate...
I tried updating and upgrading pip versions, tried in python 2.7 and python3.10 but still got the same error.
I also tried this command,
python3 -m pip3 install -U pip
this returned
No module named pip3
pip --version pip 23.0 from C:\Users\sebas\AppData\Local\Programs\Python\Python310\lib\site-packages\pip (python 3.10)
python --version 3.10.4
$ pip install websocket
Collecting websocket
Using cached websocket-0.2.1.tar.gz (195 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [1 lines of output]
ERROR: Can not execute `setup.py` since setuptools is not available in the build environment.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Any idea what's going on here? I have never seen such an error before.
how to install locustio
study_locust /usr/local/bin/python3.8 -m pip install locustio
Looking in indexes: http://pypi.byted.org/simple/pypi/+simple
Collecting locustio
Downloading http://pypi.byted.org/packages/pypi/locustio/locustio-0.999.tar.gz (267 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 267.6/267.6 kB 741.2 kB/s eta 0:00:00
Preparing metadata (setup.py) ... done
Installing collected packages: locustio
DEPRECATION: locustio is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
Running setup.py install for locustio ... error
error: subprocess-exited-with-error
× Running setup.py install for locustio did not run successfully.
│ exit code: 1
╰─\> \[4 lines of output\]
running install
\*\*\*\* Locust package has moved from 'locustio' to 'locust'. Please update your reference (or pin your version to 0.14.6 if you dont want to update to 1.0) \*\*\*\*
\[end of output\]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─\> locustio
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.
➜ study_locust
× Running setup.py install for locustio did not run successfully.
│ exit code: 1
╰─> [4 lines of output]
running install
\*\*\*\* Locust package has moved from 'locustio' to 'locust'. Please update your reference (or pin your version to 0.14.6 if you dont want to update to 1.0) \*\*\*\*
\[end of output\]
https://docs.locust.io/en/stable/installation.html
locustio is no longer the name of the package. As the error message and docs say, you need to install locust.
pip3 install locust
I try to install the library ipympl using pip:
pip3 install ipympl
I am on a windows computer with python 3.8.
I get this Error:
Preparing metadata (pyproject.toml) ... error
error: subprocess-exited-with-error
× Preparing metadata (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Cargo, the Rust package manager, is not installed or is not on PATH.
This package requires Rust and Cargo to compile extensions. Install it through
the system's package manager or via https://rustup.rs/
Checking for Rust toolchain....
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
I Install https://rustup.rs/
and give path but still not working I think that I do something wrong.
Ive recently bought a MacBook Pro and was setting it up for some python and Django programming but I ended up having problems installing psycopg2, I've tried several things already and none of those worked for me, here left the error,
Collecting psycopg2
Using cached psycopg2-2.9.3.tar.gz (380 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [23 lines of output]
running egg_info
creating /private/var/folders/7f/ssr40bmj6t3_yq0cv_43cttc0000gn/T/pip-pip-egg-info-noe7l09b/psycopg2.egg-info
writing /private/var/folders/7f/ssr40bmj6t3_yq0cv_43cttc0000gn/T/pip-pip-egg-info-noe7l09b/psycopg2.egg-info/PKG-INFO
writing dependency_links to /private/var/folders/7f/ssr40bmj6t3_yq0cv_43cttc0000gn/T/pip-pip-egg-info-noe7l09b/psycopg2.egg-info/dependency_links.txt
writing top-level names to /private/var/folders/7f/ssr40bmj6t3_yq0cv_43cttc0000gn/T/pip-pip-egg-info-noe7l09b/psycopg2.egg-info/top_level.txt
writing manifest file '/private/var/folders/7f/ssr40bmj6t3_yq0cv_43cttc0000gn/T/pip-pip-egg-info-noe7l09b/psycopg2.egg-info/SOURCES.txt'
Error: pg_config executable not found.
pg_config is required to build psycopg2 from source. Please add the directory
containing pg_config to the $PATH or specify the full executable path with the
option:
python setup.py build_ext --pg-config /path/to/pg_config build ...
or with the pg_config option in 'setup.cfg'.
If you prefer to avoid building psycopg2 from source, please install the PyPI
'psycopg2-binary' package instead.
For further information please check the 'doc/src/install.rst' file (also at
<https://www.psycopg.org/docs/install.html>).
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
It shows it is not a problem with pip but with setup.py but can not find anything,
any help would be welcomed
Thanks
As Alex mentioned, it is PostGreSQL being not installed on your system that throws up the error
Install PostGreSQL and it will all work fine
Try this
❯ brew install postgresql
# If you open a new terminal tab you will see that pg_config is available
❯ export CPPFLAGS="-I/opt/homebrew/opt/openssl#1.1/include"
❯ export LDFLAGS="-L/opt/homebrew/opt/openssl#1.1/lib -L${HOME}/.pyenv/versions/3.8.10/lib"
❯ python -V
Python 3.9.13
❯ pip install psycopg2-binary==2.8.6```
Try using the following command:
pip3 install psycopg2-binary
Late, but I just had this problem and nothing I was finding was fixing it. I was trying to install the requirements.txt for an ongoing project on a new Mac. Eventually I remembered it's a postgresql package and I hadn't installed postgresql yet. As soon as I installed postgresql and tried installing psycopg2 again, it worked fine with no errors.