I am trying to run a cmd file that calls a PowerShell script from cmd.exe, but I am getting this error:
Management_Install.ps1 cannot be loaded because the execution of scripts is disabled on this system.
I ran this command:
Set-ExecutionPolicy -ExecutionPolicy Unrestricted
When I run Get-ExecutionPolicy from PowerShell, it returns Unrestricted.
Get-ExecutionPolicy
Output:
Unrestricted
cd "C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\Install\Scripts"
powershell .\Management_Install.ps1 1
WARNING: Running x86 PowerShell...
File C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\Install\Scripts\Management_Install.ps1 cannot be loaded because the execution of scripts is disabled on this system. Please see "get-help about_signing" for more details.
At line:1 char:25
.\Management_Install.ps1 <<<< 1
CategoryInfo : NotSpecified: (:) [], PSSecurityException
FullyQualifiedErrorId : RuntimeException
C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\Install\Scripts> PAUSE
Press any key to continue . . .
The system is Windows Server 2008 R2.
What am I doing wrong?
If you're using Windows Server 2008 R2 then there is an x64 and x86 version of PowerShell both of which have to have their execution policies set. Did you set the execution policy on both hosts?
As an Administrator, you can set the execution policy by typing this into your PowerShell window:
Set-ExecutionPolicy RemoteSigned
For more information, see Using the Set-ExecutionPolicy Cmdlet.
When you are done, you can set the policy back to its default value with:
Set-ExecutionPolicy Restricted
You may see an error:
Access to the registry key
'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\ShellIds\Microsoft.PowerShell' is denied.
To change the execution policy for the default (LocalMachine) scope,
start Windows PowerShell with the "Run as administrator" option.
To change the execution policy for the current user,
run "Set-ExecutionPolicy -Scope CurrentUser".
So you may need to run the command like this (as seen in comments):
Set-ExecutionPolicy RemoteSigned -Scope CurrentUser
You can bypass this policy for a single file by adding -ExecutionPolicy Bypass when running PowerShell
powershell -ExecutionPolicy Bypass -File script.ps1
I had a similar issue and noted that the default cmd on Windows Server 2012, was running the x64 one.
For Windows 11, Windows 10, Windows 7, Windows 8, Windows Server 2008 R2 or Windows Server 2012, run the following commands as Administrator:
x86 (32 bit)
Open C:\Windows\SysWOW64\cmd.exe
Run the command powershell Set-ExecutionPolicy RemoteSigned
x64 (64 bit)
Open C:\Windows\system32\cmd.exe
Run the command powershell Set-ExecutionPolicy RemoteSigned
You can check mode using
In CMD: echo %PROCESSOR_ARCHITECTURE%
In Powershell: [Environment]::Is64BitProcess
References:
MSDN - Windows PowerShell execution policies
Windows - 32bit vs 64bit directory explanation
Most of the existing answers explain the How, but very few explain the Why. And before you go around executing code from strangers on the Internet, especially code that disables security measures, you should understand exactly what you're doing. So here's a little more detail on this problem.
From the TechNet About Execution Policies Page:
Windows PowerShell execution policies let you determine the conditions under which Windows PowerShell loads configuration files and runs scripts.
The benefits of which, as enumerated by PowerShell Basics - Execution Policy and Code Signing, are:
Control of Execution - Control the level of trust for executing scripts.
Command Highjack - Prevent injection of commands in my path.
Identity - Is the script created and signed by a developer I trust and/or a signed with a certificate from a Certificate Authority I trust.
Integrity - Scripts cannot be modified by malware or malicious user.
To check your current execution policy, you can run Get-ExecutionPolicy. But you're probably here because you want to change it.
To do so you'll run the Set-ExecutionPolicy cmdlet.
You'll have two major decisions to make when updating the execution policy.
Execution Policy Type:
Restricted† - No Script either local, remote or downloaded can be executed on the system.
AllSigned - All script that are ran require to be digitally signed.
RemoteSigned - All remote scripts (UNC) or downloaded need to be signed.
Unrestricted - No signature for any type of script is required.
Scope of new Change
LocalMachine† - The execution policy affects all users of the computer.
CurrentUser - The execution policy affects only the current user.
Process - The execution policy affects only the current Windows PowerShell process.
† = Default
For example: if you wanted to change the policy to RemoteSigned for just the CurrentUser, you'd run the following command:
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser
Note: In order to change the Execution policy, you must be running PowerShell As Administrator.
If you are in regular mode and try to change the execution policy, you'll get the following error:
Access to the registry key 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\ShellIds\Microsoft.PowerShell' is denied. To change the execution policy for the default (LocalMachine) scope, start Windows PowerShell with the "Run as administrator" option.
If you want to tighten up the internal restrictions on your own scripts that have not been downloaded from the Internet (or at least don't contain the UNC metadata), you can force the policy to only run signed scripts. To sign your own scripts, you can follow the instructions on Scott Hanselman's article on Signing PowerShell Scripts.
Note: Most people are likely to get this error whenever they open PowerShell because the first thing PowerShell tries to do when it launches is execute your user profile script that sets up your environment however you like it.
The file is typically located in:
%UserProfile%\My Documents\WindowsPowerShell\Microsoft.PowerShellISE_profile.ps1
You can find the exact location by running the PowerShell variable
$profile
If there's nothing that you care about in the profile, and don't want to fuss with your security settings, you can just delete it and PowerShell won't find anything that it cannot execute.
We can get the status of current ExecutionPolicy by the command below:
Get-ExecutionPolicy
By default it is Restricted. To allow the execution of PowerShell scripts we need to set this ExecutionPolicy either as Unrestricted or Bypass.
We can set the policy for Current User as Bypass by using any of the below PowerShell commands:
Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy Unrestricted -Force
Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy Bypass -Force
Unrestricted policy loads all configuration files and runs all scripts. If you run an unsigned script that was downloaded from the Internet, you are prompted for permission before it runs.
Whereas in Bypass policy, nothing is blocked and there are no warnings or prompts during script execution. Bypass ExecutionPolicy is more relaxed than Unrestricted.
Also running this command before the script also solves the issue:
Set-ExecutionPolicy Unrestricted
If you are in an environment where you are not an administrator, you can set the Execution Policy just for you (CurrentUser), and it will not require administrator.
You can set it to RemoteSigned:
Set-ExecutionPolicy -Scope "CurrentUser" -ExecutionPolicy "RemoteSigned"
or Unrestricted:
Set-ExecutionPolicy -Scope "CurrentUser" -ExecutionPolicy "Unrestricted"
You can read all about Getting and Setting Execution policy in the help entries:
Help Get-ExecutionPolicy -Full
Help Set-ExecutionPolicy -Full
In Windows 7:
Go to Start Menu and search for "Windows PowerShell ISE".
Right click the x86 version and choose "Run as administrator".
In the top part, paste Set-ExecutionPolicy RemoteSigned; run the script. Choose "Yes".
Repeat these steps for the 64-bit version of Powershell ISE too (the non x86 version).
I'm just clarifying the steps that #Chad Miller hinted at. Thanks Chad!
RemoteSigned: all scripts you created yourself will be run, and all scripts downloaded from the Internet will need to be signed by a trusted publisher.
OK, change the policy by simply typing:
Set-ExecutionPolicy RemoteSigned
I'm using Windows 10 and was unable to run any command. The only command that gave me some clues was this:
[x64]
Open C:\Windows\SysWOW64\cmd.exe [as administrator]
Run the command> powershell Set-ExecutionPolicy Unrestricted
But this didn't work. It was limited. Probably new security policies for Windows10. I had this error:
Set-ExecutionPolicy: Windows PowerShell updated your execution policy successfully, but the setting is overridden by a policy defined at a more specific scope. Due to the override, your shell will retain its current effective execution policy of...
So I found another way (solution):
Open Run Command/Console (Win + R)
Type: gpedit.msc (Group Policy Editor)
Browse to Local Computer Policy -> Computer Configuration -> Administrative Templates -> Windows Components -> Windows Powershell.
Enable "Turn on Script Execution"
Set the policy as needed. I set mine to "Allow all scripts".
Now open PowerShell and enjoy ;)
First, you need to open the PowerShell window and run this command.
set-ExecutionPolicy RemoteSigned -Scope CurrentUser
Then it will ask you to confirm. Type Y and press Enter.
When you run this command, you can see that your system has set all policies for the current user as remotely. It will take a few seconds to complete this process.
The image will be shown like below:
To check if the execution policy has set. Type:
Get-ExecutionPolicy
If it was set, the output would be like this:
Open a Windows PowerShell command window and run the below query to change ExecutionPolicy:
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser
If it asks for confirming changes, press Y and hit Enter.
You should run this command:
Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy Unrestricted
Win + R and type copy paste command and press OK:
powershell Set-ExecutionPolicy -Scope "CurrentUser" -ExecutionPolicy "RemoteSigned"
And execute your script.
Then revert changes like:
powershell Set-ExecutionPolicy -Scope "CurrentUser" -ExecutionPolicy "AllSigned"
Open the command prompt in Windows.
If the problem is only with PowerShell, use the following command:
powershell Set-ExecutionPolicy -Scope "CurrentUser" -ExecutionPolicy "RemoteSigned"
Setting the execution policy is environment-specific. If you are trying to execute a script from the running x86 ISE you have to use the x86 PowerShell to set the execution policy. Likewise, if you are running the 64-bit ISE you have to set the policy with the 64-bit PowerShell.
you may try this and select "All" Option
Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy RemoteSigned
Open Run Command/Console ( Win + R )
Type: gpedit. msc (Group Policy Editor)
Browse to Local Computer Policy -> Computer Configuration -> Administrative Templates -> Windows Components -> Windows Powershell.
Enable "Turn on Script Execution"
Set the policy as needed. I set mine to "Allow all scripts".
Now run the run command what ever you are using.. Trust this the app will runs.. Enjoy :)
You can also bypass this by using the following command:
powershell Get-Content .\test.ps1 | Invoke-Expression
You can also read this article by Scott Sutherland that explains 15 different ways to bypass the PowerShell Set-ExecutionPolicy if you don't have administrator privileges:
15 Ways to Bypass the PowerShell Execution Policy
I have also faced a similar issue. Try this.
As I'm using Windows, I followed the steps as given below.
Open a command prompt as an administrator and then go to this path:
C:\Users\%username%\AppData\Roaming\npm\
Look for the file ng.ps1 in this folder (directory)
and then delete it (del ng.ps1).
You can also clear npm cache after this though it should work without this step as well.
If you have Git installed, just use Git Bash.
Set-ExecutionPolicy RemoteSigned
Executing this command in administrator mode in PowerShell will solve the problem.
In Window 10:
If you are not administrator, you can use this:
powershell Set-ExecutionPolicy -Scope CurrentUser
cmdlet Set-ExecutionPolicy at command pipeline position 1
Supply values for the following parameters:
ExecutionPolicy: `RemoteSigned`
It solved my problem like a charm!
In the PowerShell ISE editor I found running the following line first allowed scripts.
Set-ExecutionPolicy RemoteSigned -Scope Process
For Windows 11...
It is indeed very easy. Just open the settings application.
Navigate to Privacy and Security:
Click on For Developers and scroll to the bottom and find the PowerShell option under which check the checkbox stating "Change the execution policy ... remote scripts".
Open PowerShell as Administrator and run Set-ExecutionPolicy -Scope CurrentUser
Provide RemoteSigned and press Enter
Run Set-ExecutionPolicy -Scope CurrentUser
Provide Unrestricted and press Enter
Open PowerShell as a administrator. Run the following command
Set-ExecutionPolicy RemoteSigned
Type Y when asked!
In Windows 10, enable the option under the name: 'Install apps from any source, including loose files.'
It fixed the issue for me.
To fix this issue, we have to set the execution policy, so that the PowerShell script runs on the particular machine. Here is how:
Open PowerShell Console by selecting “Run as Administrator” and set the execution Policy with the command: Set-ExecutionPolicy RemoteSigned
Type “Y” when prompted to proceed
credits:
https://www.sharepointdiary.com/2014/03/fix-for-powershell-script-cannot-be-loaded-because-running-scripts-is-disabled-on-this-system.html
In PowerShell 2.0, the execution policy was set to disabled by default.
From then on, the PowerShell team has made a lot of improvements, and they are confident that users will not break things much while running scripts. So from PowerShell 4.0 onward, it is enabled by default.
In your case, type Set-ExecutionPolicy RemoteSigned from the PowerShell console and say yes.
Related
I am running below command using CMD(as administrator) provided in to document (In Full setup section - Step-2),
#powershell -NoProfile -ExecutionPolicy Bypass -Command "iex ((new-object net.webclient).DownloadString('https://www.nativescript.org/setup/win'))"
but getting below exception,
Exception calling "DownloadString" with "1" argument(s): "The request was aborted: Could not create SSL/TLS secure channel."
At line:1 char:1
After doing some google search, I found that I need to change the security protocol to Tls1.2, so tried to fire same command using Windows PowerShell(as administrator) after adding the protocal Tls1.2,
First command to add Tls1.2,
[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
second same command which I ran on CMD,
#powershell -NoProfile -ExecutionPolicy Bypass -Command "iex ((new-object net.webclient).DownloadString('https://www.nativescript.org/setup/win'))"
but by using PowerShell, I got below,
I would appreciate if you can help me with this.
After you set the SecurityProtocolType in Powershell, simply execute this in Powershell as well:
iex ((new-object net.webclient).DownloadString('https://www.nativescript.org/setup/win'))
Problem: When I run a Powershell runbook with an 'Invoke-AzureRmVMRunCommand' on an Azure Windows VM, and I have to STOP the runbook because of an error in the invoked command (and it idles forever), all new repetitions of the runbook fail with "Run command extension execution is in progress. Please wait for completion before invoking a run command.".
This is the runbook statement to have a PS script running on the VM:
Invoke-AzureRmVMRunCommand -ResourceGroupName $objVM.ResourceGroupName -Name $objVM.Name -CommandId 'RunPowerShellScript' -ScriptPath $strRemoteScriptFileNameTmp -Parameter $hshParams
The PS code in '$strRemoteScriptFileNameTmp' has this statement in it, which makes the runbook idling, ,i.e. need to be fixed:
Invoke-Expression -Command "$strRunTimeEnv $strExecPath $strExecParaString"
The -Command then looks as this; it shall install that ODBC driver to the VM, and works when executed with the PS CLI of the VM (RDP'd):
msiexec.exe /quiet /passive /qn /norestart /l* D:\msodbcsql_13.0_x64.log /package D:\UpdateODBC\Application\Live\msodbcsql_13.0_x64.msi IACCEPTMSODBCSQLLICENSETERMS=YES ADDLOCAL=ALL
Question: I know there is a timeout of 90 minutes for that (orphaned) command of the runbook. But, where is this idling, on the VM or the Automation Account? And, how can I kill it? It seems ridiculous to wait for 90 minutes before a new attempt to run the runbook can be made.
(I am not exactly get into a productive workflow here the way Msft have set this up... And yes, I read the posts on this topic already, and also the Msft docs which really need proof-reading by an English speaker, btw.)
To conclude this I just like to share what I was given by MSDN in their answer:
"...Invoke-AzureRmVMRunCommand is actually using a REST command to send a powershell script to the VM..."
"There are restrictions on what can be done via this method:
One script at a time can run.
You can't cancel a running script.
The maximum time a script can run is 90 minutes. After that, it will time out.
"
See:
[https://learn.microsoft.com/en-us/azure/virtual-machines/windows/run-command#restrictions][1]
Best!
Currently I am using this Powershell script which runs before deployment script.
$Password=Convertto-SecureString -String ${bamboo.deploy.password} -AsPlainText -force
$Credentials=New-object System.Management.Automation.PSCredential ${bamboo.deploy.username},$Password
Enter-PSSession -ComputerName ${Server} -Credential $Credentials
Invoke-Command -ScriptBlock {start cmd;cd C:\Windows\System32\inetsrv;appcmd stop apppool /apppool.name:"${app_pool_name}"}
But it gives the following error:
The term 'appcmd' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
I have also tried using the Stop-WebAppPool cmdlet. It also gave an error saying Stop-WebAppPool is not recognized as the name of any cmdlet. I have also tried Import-Module WebAdministration before Stop-WebAppPool cmdlet. It also was not successful.
Edit: When I use the same script from my localhost, it works successfully. When I use this script on BAMBOO, it gives the above mentioned error. Is it possible that the WebAdministration Module is not installed on the agent's environment or Bamboo server?
Make sure you enabled IIS Management Scripts and Tools feature of iis.
you could try these steps:
1. Open Turn Windows features on or off.
Enable IIS Management Scripts and Tools under “Internet Information Services” => “Web Management Tools”.
We will see the appcmd.exe in C:\Windows\System32\inetsrv folder then.
Add C:\Windows\System32\inetsrv to PATH system environment variable.
I have WebApp and Webjob in Azure. My webjob tries to run some powershell scripts using PowerShell.Create() then ps.AddScript(script) and ps.Invoke().
In my local environment webjob works well and all ps scripts are executed correctly. But in Azure webjobs throws following fail:
One or more errors occurred. (File D:\local\Temp...\Login.ps1 cannot be loaded because running scripts are disabled on this system. For more information, see about_Execution_Policies.
After that I try to set execution policy as urestricted but this command doesn't work in azure console.
My current execution policy:
MachinePolicy Undefined
UserPolicy Undefined
Process Undefined
CurrentUser Undefined
LocalMachine RemoteSigned
I have tried the following ways to change execution policy(I run all commands in azure portal console):
Set-ExecutionPolicy Unrestricted
Set-ExecutionPolicy : Access to the registry key 'HKEY_LOCAL_MACHINE\SOFTWARE\M
icrosoft\PowerShell\1\ShellIds\Microsoft.PowerShell' is denied. To change the
execution policy for the default (LocalMachine) scope, start Windows
PowerShell with the "Run as administrator" option.
But I don't know how to run the console in Azure as Administrator.
Set-ExecutionPolicy Unrestricted -Scope CurrentUser
Set-Executionpolicy : The specified registry key does not exist.
At line:1 char:1
+ Set-Executionpolicy -Scope CurrentUser -ExecutionPolicy UnRestricted
How to change ExecutionPolicy in Azure? Or how to avoid issue with disabling ps scripts?
Please, help me!)
Azure Shell (I think you mean this with Azure Portal Console) has nothing to do with your Azure App Service. Have you tried setting the policy in C# code instead?
I have generalized a windows Azure image and I am using it in an ARM (Azure resoure manager) template to create a new VM. At the time of VM creation I am doing some bootstrapping work using Custom Script extension that runs a Powershell script. It works fine except for few things that are specific to a user that will log on to machine. For example, I can't map a network drive or set powershell exection policty to remotesigned for the user who will log in to the machine via Custom Script Extension.
Is there a way to accomplish user specific tasks in the ARM template or set some scripts to run when user will log in?
Maybe a bit late, but I am using sth similar to this:
However, we can’t directly hand this script to Custom Script Extension yet. Custom Script Extension uses NTAUTHORITY\SYSTEM account to execute scripts, but the account doesn’t have necessary privileges to execute the SQL configuration commands. To work around this, we’ll create a separate bootstrap script, which impersonates an administrator account before invokes the script.
Here is the code used:
$password = ConvertTo-SecureString "[your admin account user password]" -AsPlainText -Force
$credential = New-Object System.Management.Automation.PSCredential("$env:COMPUTERNAME\[your admin account]", $password)
$command = $file = $PSScriptRoot + "\CustomScriptSQLPS.ps1"
Enable-PSRemoting –force
Invoke-Command -FilePath $command -Credential $credential -ComputerName $env:COMPUTERNAME
Disable-PSRemoting -Force
I don't know if remoting is relevant for this though ...
Credits to Haishi Bai