I have two formulas that I need to transfer to VBA.
On Excel, my formula would be =countif(A$2:A2,A2) so I transferred that using this formula but everything is returning to 1. The rows didn't become dynamic and I want only the values to be displayed.
For a = 2 To lrow
ws.Range("T" & a).Formula = "=CountIf(A$2&"":""&A2)"",""&A2)"
Next a
Next formula that I use in Excel is
=IF(COUNTIF(A:A,A2)>Q2,"Check","Ok")
I tried this formula in VBA:
For i = 2 to lrow
If Countif(ws.Range("A2:A" & lrow), "A2") > ws.Range("Q2:Q", & lrow) Then
ws.Range("T" & i).Value = "Check"
Else
ws.Range("T" & i).Value = "Ok"
End If
Next i
You could populate column T with your first formula with this line of code:
ws.Range("T2:T" & lrow).FormulaR1C1 = "=COUNTIF(R2C[-19]:RC[-19],RC[-19])"
I can't advise on your second formula unless you clarify where you want to write it...
Related
Sub vlookup
Dim TR As Long
TR = Range("C" & Rows.Count).End(xlUp).Row
Range("F46").Formula ="=Vlookup(C46,OpenDCSInvoices!$A:$C, 3, False)"
Range("F46").Copy
Range("F46:F" & TR).PasteSpecial xlPasteAll
End sub
As this is a weekly report it varies so the vlookup may be inserted in a different cell depending on how big or small the data file is. This code works for this week but it won’t work for next week as it will change. I need to insert the vlookup in column F after the last cell of data as I am adding to existing data and it needs to lookup the value in column C that is adjacent to where the vlookup will start. Thank you and anything helps as I am stuck.
Try this, not 100% sure I have understood. You can change the variable name to something better.
Sub vlookup()
Dim TR As Long, TRf As Long
TR = Range("C" & Rows.count).End(xlUp).Row
TRf = Range("F" & Rows.count).End(xlUp).Row + 1
Range("F" & TRf & ":F" & TR).Formula = "=Vlookup(C" & TRf & ",OpenDCSInvoices!$A:$C, 3, False)"
End Sub
I am trying to write a Forumla in cells (from cell A2 to AI, where I is the number in the For Loop).
The formula to be written must correspond to Cell M2 to MI, also where I is the number in the For Loop.
I am able to write the sheet-reference by itself:
ws.Cells(1 + I, KolonneForX + 1).Formula = " ='" & ws.Name & "'"
which gives me the formula ='Ark1' (by it self) in the cells i want.
And also the right name of cell to read:
ws.Cells(1 + I, KolonneForX + 2).Formula = "=CONCATENATE(""M"",TEXT(" & I & "+1,""0""))"
which gives me the formula MI (by it self, with the corresponing number for I) in the cells i want.
But when I try to put the two of them togheter, I can't get it to run and refer to the right cells.
This is the code I have been trying to run:
Sub OppretteKnutepunkt()
Dim ws As Worksheet
Set ws = Worksheets("Ark1")
Dim KolonneForX As Integer
For I = 1 To 5
ws.Cells(1 + I, KolonneForX + 2).Formula = "='" & ws.Name & "'!CONCATENATE(""M"",TEXT(" & I & "+1,""0""))"
Next I
End Sub
I want the Cell A2 to have the following formula:
='Ark1'!M2
I want the Cell A3 to have the following formula:
='Ark1'!M3
and so on.
Any suggestions?
You can achieve this without looping
Dim I as Long
I = 7
With ws.Range("A2:A" & I)
.Formula = "='" & .Parent.Name & "'!M2"
End With
With is a shorthand way of using the same prefix on a block of code. The VBA compiler prefixes everything that begins with a . with whatever is declared by the With block
The equivalent of the above would be:
ws.Range("A2:A" & I).Formula = "='" & ws.Range("A2:A" & I).Parent.Name & "'!M2"
I have a table in which I count the records through Worksheet.Function.Countif.
It is nice because it counts the rows using .Rows.Count and so I am alwasy ensured if my table changes the size.
It looks like that (subset of the code):
endrow = .Cells(.Rows.Count, 20).End(xlUp).Row
ws1.Cells(6, 34).Formula = "=COUNTIF(" & .Range("U6:U" & endrow).Address & ",U6)"
I wish to write the the worksheet.function formula in the same way as above but for 'Countifs'. In excel, I would type it like that:
=COUNTIFS($U$6:$U$144;U6;$T$6:$T$144$;"<>"&T6)
How to write it in vba, using 'endrow' as in the first demonstarted code, i.e. without '144' as the last row but with '& endrow' ?
I was trying multiple times, but I cannot get it to work :/
I will appreciate any help.
Try this:
ws1.Cells(6, 34).Formula = "=COUNTIFS($U$6:$U$" & endrow & ",U6,$T$6:$T$" & endrow & "," & """" & "<>" & """" & "&T6" & ")"
This formula gets the last row of column A:
=IFERROR(LOOKUP(2,1/(NOT(ISBLANK(A:A))),ROW(A:A)),0)
Can somebody help me to write this formula in excel VBA?
=IF(ISERROR(VLOOKUP(A3,Temp!$A$3:$A$595,1,FALSE)),A3,"0")
My code is getting stuck with :"syntax error"
Sub checkDuplitems()
Application.ScreenUpdating = False
Const top As Integer = 3
Dim bottom As Long
bottom = Sheets("Temp").Cells(Rows.Count, top).End(xlUp).row
With ThisWorkbook.Sheets("trash").Range("A" & top & ":A" & bottom)
.Formula = "=IF(ISERROR(VLOOKUP(A" & top & ",Temp!$B$" & top & ":$B$" & bottom & _
",1,FALSE)),A" & top & ", & '" 0" & ," '")"
.Value = .Value
.SortSpecial
End With
'Call something...
End Sub
You have a concatenation problem in the second line of the .Formula line.
To emulate the formula you have at the top of your question (which is wrong incidentally because you should be pointing to $B$3:$B$595 or something like that because your look up cell A3 should not be inside the VLOOKUP range).
Try this new .Formula line:-
.Formula = "=IF(ISERROR(VLOOKUP(A" & top & ",Temp!$B$" & top & ":$B$" & bottom & _
",1,FALSE)),A" & top & ", " & "0)"
Are you sure you want to use top as both the starting row in column A and the column to get the bottom row from the Temp worksheet? The important column on the Temp worksheet is column B (i.e. 2) not C (i.e. 3).
If you are putting formula(s) into Trash!A3:A595 that reference Trash!A3:A595 then these are circular references and cannot be resolved under normal conditions. I'll put the formulas into column Z.
If you are operating with Excel 2007 or newer then I would humbly propose this alternate that uses the worksheet's IFERROR function and does not attempt to make text out of the 0 returned value.
Const top As Integer = 3
Dim bottom As Long
bottom = Sheets("Temp").Cells(Rows.Count, "B").End(xlUp).Row '<~~change here
With ThisWorkbook.Sheets("trash")
With .Range("Z" & top, .Cells(Rows.Count, "A").End(xlUp).Offset(0, 25))
.Formula = "=IFERROR(VLOOKUP(A" & top & ", Temp!$B$" & top & ":$B$" & bottom & _
", 1, FALSE), 0)" '<~~ big change here
.Value = .Value
End With
End With
It is also curious as to why the number of rows of formulas in the Trash worksheet must be governed by the number of rows of data in the Temp worksheet. I would have thought that the number of values in column A of the Trash sheet should govern how many formulas go into the Trash worksheet.
I haven't found an appropriate answer for this question and I'm very new to VBA, so I hope someone will help me out.
I'm trying to create a Sub in my macro that does a simple value compare between two columns, row by row. If they are an exact match it will populate a third column with "Yes", otherwise it will say "No"
All columns are within an excel Table and have the same amount of rows, an example of what the result should look like is this (don't have enough rep to post image):
I was thinking something like a For Each statement but I'm not sure how to create it the right way. Thank you ahead of time for your help!
Quick subroutine to loop through rows 1 through 20 and compare results:
for i = 1 to 20
If sheet1.range("A" & i).value = sheet1.Range("B" & i).value Then
sheet1.Range("C" & i).value = "No"
Else
sheet1.Range("C" & i).value = "Yes"
End if
Next i
Because this seems like more of a learning experiment, you can also reference cells by:
for i = 1 to 20
If sheet1.cells(i,1).value = sheet1.cells(i,2).value Then
sheet1.cells(i,3).value = "No"
Else
sheet1.cells(i,3).value = "Yes"
End if
Next i
You mention the range will vary in size. You can get the last row that is populated and then loop from 1 to that with:
Dim endRow as long
endRow = Sheet1.Range("A999999").End(xlUp).Row
for i = 1 to endRow
If sheet1.range("A" & i).value = sheet1.Range("B" & i).value Then
sheet1.Range("C" & i).value = "No"
Else
sheet1.Range("C" & i).value = "Yes"
End if
Next i
A table will automatically bring formulas to a new row when a new row is inserted. For instance, say you have the following table where the Same? column contains the formula =IF(C3=D3, "Yes", "No")
As you enter a new row in the table, the formula in the Same? column will be automatically brought to the new row. For example, this is what that cell will look like once I hit Tab to create a new row:
Now say you want to completely repopulate the table with a new set of data. That's no problem, simply copy the new data and paste it in the table like so:
Copy
Paste into first cell
The table takes care of the formulas for you, effectively making a macro unnecessary.
Thank you all for your input!
I took elements from your answers and managed to come up with a code that solves my problem. Let me know if you have any questions
Sub Compare
On Error Resume Next
Dim Sm_Row As Long
Sm_Row = Range("Table1[Same?]").Row
For Each cl In Range("Table1[Same?]")
If Range("Table1[Col1]").Cells(Sm_Row, 1).Value = Range("Table1[Col2]").Cells(Sm_Row, 1).Value Then
cl.Value = "Yes"
Else
cl.Value = "No"
End If
Sm_Row = Sm_Row + 1
Next cl
End Sub