How can I install MongoDB in openSUSE tumbleweed I have tried
sudo zypper install mongodb
and I get the following output:
Problem: nothing provides 'libboost_program_options.so.1.76.0()(64bit)' needed by the to be installed mongodb-server-3.6.8-4.46.x86_64
while I already have the following packages installed:
libboost_program_options-devel
libboost_program_options1_79_0
libboost_program_options1_79_0-devel
Anyone with solutions to this?
Related
I try installing mongodb with the following commands:
sudo apt update
sudo apt upgrade
sudo apt install mongodb
However I get the following error:
Package mongodb is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mongodb' has no installation candidate
I want to install this on a Linux dev board which has an armv71 cpu, how would I fix it.
I have been trying to install condor on my centos virtual machine but keep getting the following errors:
--> Finished Dependency Resolution
Error: Package: condor-classads-8.5.5-1.el6.x86_64 (htcondor-development)
Requires: libpcre.so.0()(64bit)
Error: Package: condor-8.5.5-1.el6.x86_64 (htcondor-development)
Requires: ecryptfs-utils
Error: Package: condor-8.5.5-1.el6.x86_64 (htcondor-development)
Requires: libpcre.so.0()(64bit)
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
I looked around online and tried all the suggestions but nothing's worked. I did the next logical thing and tried to install those packages but doing yum install ecryptfs-utils gave me "Nothing to do," message. Same with libpcre.so.0() I'm a beginner with Linux so I don't know what I'm doing wrong here. Help appreciated.
I had the same issue, and this was happening because yum was trying to install different version of condor. I was running centos 6.6, but yum was trying to install centos 7 (rhel 7) version. The reason for this was, by mistake, I initially downloaded and setup the rhel7 repo details of condor, and results got cached.
The solution is to clear yum cache (yum clean all), download the correct condor repo for your CentOS version/arch (use rpm -q centos-release to find this out), and then install (yum install condor-all).
Get condor from the official location. It has all the binaries it needs.
I'm trying to install libboost1.46-all-dev on Ubuntu 13.04 because it's necessary for our project.
Unfortunately I was not able to find it in my repos while doing
sudo apt-cache search libboost1.49-all-dev
Default is actually libboost1.46-all-dev. Does anyone has an idea where I can find the older package and install it using apt-get ?
I'm trying to configure powertop-2.5 but when I run ./configure I get a "configure: error: libnl and libnl-genl are required but were not found" error
I've run
sudo apt-get install libtool autoconf libnl-dev ncurses-dev pciutils-dev build-essential -y
as was recommended by these guys but I get the same error.
I ran
sudo apt-get install libnl-genl-3-dev
Which replaced the previous libnl file but I still get the config error.
According to this, powertop has (or had) problems with detecting libnl but I can't figure out how to fix it.
I'm currently running Linux username 3.2.0-4-686-pae #1 SMP Debian 3.2.51-1 i686 GNU/Linux
I see you tried libnl-dev, maybe try libnl-3-dev instead:
sudo apt-get install libnl-3-dev libnl-genl-3-dev
Probably the problem is the lack of the pkg-config application in your system (which is used to find the proper dependencies with the configure script). I just have the same problem in a fresh installed Ubuntu 14.04 system, and after installing the pkg-config package the configure script finalized successfully its work. Then I could compile and install the last version (2.6.1) of powertop.
I "solved" my problem by installing powertop-2.0 instead.
The use of pkg-config made the trick. I was able to install Powertop 2.7.
recently i tried to install oracle on my linux with apt (I never used yum before) using fast manual:
http://www.oracle.com/technetwork/articles/servers-storage-admin/ginnydbinstallonlinux-488779.html
And after command:
sudo yum install oracle-rdbms-server-11gR2-preinstall
I got error:
Failed: ca-certificates.noarch 0:2010.63-3.el6_1.5 chkconfig.x86_64 0:1.3.49.3-2.el6 file-libs.x86_64 0:5.04-15.el6 filesystem.x86_64 0:2.4.30-3.el6
initscripts.x86_64 0:9.03.38-1.0.1.el6_4.2
Complete!
And something gone wrong because command like: ps, top are crashing
login#Ass-K55VJ:/etc/yum/repos.d$ ps -e
ps: relocation error: ps: symbol procps_number_version, version _3_2_5 not defined in file libproc-3.2.8.so with link time reference
login#Ass-K55VJ:/etc/yum/repos.d$ top
Segmentation fault (core dumped)
then I tryied to uninstall oracle and dependencies but after command:
sudo yum remove oracle-rdbms-server-11gR2-preinstall
There was a problem importing one of the Python modules
required to run yum. The error leading to this problem was:
No module named yum
Please install a package which provides this module, or
verify that the module is installed correctly.
It's possible that the above module doesn't match the
current version of Python, which is:
2.6.6 (r266:84292, Jul 10 2013, 06:42:56) [GCC 4.4.7 20120313 (Red Hat 4.4.7-3)]
If you cannot solve this problem yourself, please go to the yum faq at: http://wiki.linux.duke.edu/YumFaq
So it seems like yum install in my system new libraries but didn't link it correctly? I dont know what do in this moment because it seems like armagedon on my ubuntu...
Does this mean you're on ubuntu and tried to install rpm packages using yum? The manual you used is for Oracle Linux 6, why would you try that on ubuntu?
rpm packages are not compatible with debian based systems like ubuntu, which use deb packages. So you've probably screwed your system big time, overwriting important system libraries with incompatible ones.
If apt-get is still working, then you can try to reinstall (apt-get --reinstall install) the equivalent libraries to the ones mentioned in the install manual you linked to - naming isn't always the same for rpm and deb packages. dpkg -l should help you see which the correct installed libraries are. I'd start with the C libraries (libc) etc.
But if apt-get is screwed also, then you'd need to download the packages manually from an ubuntu mirror and install them using dpkg, but I think a reinstall (or restore from backup if you have one) would be the best option.