I was previously running into environment inconsistencies after downloading tensorflow with pip in a conda environment, and after several hours of frustration, decided deleting anaconda/miniconda and python and starting from scratch would be my best option to get python working again (The inconsistencies were causing a plethora of issues with loading other modules like numpy, etc).
After downloading Python version 3.9.10 directly from https://www.python.org/downloads/macos/, I wanted to see if I could start using Python again in a Jupyter notebook in VS Code. When I try to run a simple print('hello world') in a python chunk I (unsurprisingly) get the following error:
Jupyter cannot be started. Error attempting to locate jupyter: Running cells with 'Python 3.9.10 64-bit' requires notebook package.
Run the following command to install 'jupyter and notebook' into the Python environment.
Command: 'python -m pip install jupyter notebook -U'
I was pretty much expecting this error, since I knew I had deleted all packages when deleting Anaconda and Python.
However, when I try running python -m pip install jupyter notebook -U in the terminal I ultimately get the following error:
xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun
error: command '/usr/bin/gcc' failed with exit code 1
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> psutil
note: This is an issue with the package mentioned above, not pip.
Any help or insight is greatly appreciated! I am on MacOS (M1) if that is useful information.
The problem seems to be with the python3 distribution that comes with MacOSX Command Line Tools. Well, at least that same error was gone after following these steps.
So, to fix the problem I installed python3.9 (I presume you can change 3.9 to your desired version, e.g. 3.8 or 3.10) using Homebrew.
Install Homebrew (to check if it's installed already just type brew --version in the terminal):
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
Install python3.9
brew install python#3.9
Create your virtual environment
python3.9 -m venv myvenv
Activate the virtual environment with source myvenv/bin/activate
Finally, install Jupyter using
(myvenv) pip install jupyter notebook
I have the same problem when installing the Jupyter notebook on MacOS 12.5 M2 chip. It turns out that the error is caused by not having GCC on my mac to run the wheel for installing the psutil package because for some reason I removed my XCode from my Mac. So I installed XCode from AppStore and opened XCode after the installation to agree to its terms and conditions. After Xcode went through the setup process I tried pip install jupyter again and it worked well.
In my case, I just opened the XCode, accept the terms and the installation proposed, and tried to install the jupyter again and it worked!
It seems to be very particular about the version of python installed. I set up a fresh installation on a new box this morning and put 3.11 on there. pip install jupyterlabs gave me the same error as you got. I then uninstalled python and installed an earlier version, and now it works.
PS the older version that worked for me is 3.10.8
Related
I am working on Jetson Nano and trying to control servo motors. I am using PCA9685. I have installed all the pre-requisites for that
sudo pip3 install adafruit-circuitpython-servokit
Faced an error called
SyntaxError: future feature annotations is not defined
i updated python for that and the issue was resolved. Now the issue is that when i use python 3.8 as an interpreter in Visual studio i face the error
No module name adafruit_servokit
But when i use the python 3.6, the adafruit_servokit error is solved and the annotation error arises.
Looking forward to every suggestion. Thank you
This is because you have conflicting interpreters for your python installation.
Inside your Visual Studio terminal, try using:
python3.8 -m pip install adafruit-circuitpython-servokit
Using python -m pip install instead of just pip install is recommended. The reason is that it will use the correct interpreter for your python installation, specially if you have many versions installed. More details here: https://snarky.ca/why-you-should-use-python-m-pip/
---EDIT---
You should replace python3.8 with your target version number.
I'm trying to install eth-brownie. Followed the Brownie documentation and installed pipx, then ran pipx ensurepath. I was originally using Python 3.10 but couldn't install it, found that this was pretty common and the best fix was to downgrade to 3.9.
After uninstalling 3.10 and installing 3.9, I ran everything again. When I run pipx install eth-brownie, I get the following error:
C:\Users\garri>pipx install eth-brownie
No Python at 'C:\Users\garri\AppData\Local\Microsoft\WindowsApps\PythonSoftwareFoundation.Python.3.10_qbz5n2kfra8p0\python.exe'
Fatal error from pip prevented installation. Full pip output in file:
C:\Users\garri\.local\pipx\logs\cmd_2022-03-28_13.40.53_pip_errors.log
Error installing eth-brownie.
I removed Python 3.10 from Path and python --version returns 3.9.12 as expected. I'm at a loss, as I feel like I've tried everything. Any help would be greatly appreciated.
This is basically a pipx cache issue. You have to delete the following folder to remove pipx related cached files.
C:\Users\<username>\.local\pipx
When trying to install requests or literally anything using pip it'll collect the option and then give me this ERROR every time. I can't use pip to install anything.
C:\Users\evand>pip3 install requests
Collecting requests
ERROR: Could not install packages due to an EnvironmentError: Could not find a suitable TLS CA certificate bundle, invalid path: path/to/ca-bundle.crt
Version of pip:
C:\Users\evand>pip --version
pip 19.2.3 from c:\users\evand\appdata\local\programs\python\python38-32\lib\site-packages\pip (python 3.8)
Version of Python:
C:\Users\evand>py --version
Python 3.8.3
Current Environment Variables (If this is related at all)
I have also tried the 'Repair' option using the Python Installer as well as uninstalling then reinstalling as a custom installation with 'Add to PATH' and the other options. That didn't fix the issue, so I deleted pip along with every module installed on my computer then reinstalled pip. Nada. At this point, I can no longer program with this computer because I cannot import any module in any of my scripts. I am not sure why this issue suddenly arose. Help would be very much appreciated.
This worked for me:
Uninstalling the pip configuration file in %appdata%/pip/ then 'modifying' python using the python launcher.
Background: while running Jupyter Notebook a new import was failing even though the library was installing successfully using pip3. Some of the set up for the code I was running was done in PyCharm which was using a virtual Python 3.8.2 environment. The failing import library is in the virtual environment so why isn't Jupyter seeing it?
I went looking and found that there are multiple versions of Python installed:
/Library/Python/2.7
/Library/Frameworks/Python.framework/Versions/3.8
/usr/local/bin/python3
/usr/local/bin/python3.8
/usr/local/bin/jupyter (included this in case it clarifies things)
/usr/bin/python
/usr/bin/python3
/usr/local/Cellar/python/3.7.6_1
/Users/xxx/anaconda3/bin/python3.7 (anaconda was uninstalled months ago so why is this still here?)
/Users/xxx/git/moat-ds/venv/lib/python3.8
I have installed pyenv and virtualenv and tried (unsuccessfully) to sort things out through this and similar articles. But all of this has only left me with questions:
what are these different directories doing?
when launched what is Jupyter notebook using for 'python 3' kernel?
where are the python packages stored when I run pip3 at the CLI (in pycharm packages are put in the \venv folder but otherwise?)
installing jupyter with pip from pyenv fixed my problem
brew uninstall jupyter
pip install jupyter
and after restarting your console it should be pyenv's jupyter
After trying #Akbar30bill's answer without success I did brew doctor and restarted my terminal and tried again and it worked. Wasn't linked correctly or something.
I'm following instructions to create a Tensorflow environment for a Machine Learning course, with python 3.5, ipython and jupyter.
I created a Tenserflow environment with python 3.5 using conda create -n tensorflow python=3.5. That worked.
Then I ran conda install -c conda-forge tensorflow. That also worked.
Then I installed ipython with conda install ipython, which also worked fine.
However, when I ran pip3 install jupyter, I got error message bash: pip3: command not found.
I found a few posts about variations on pip3 problems and (within the Tensorflow environment):
When I type pip --version, it tells me I have version 8.1.2
When I try locate pip3, I get WARNING: The locate database (/var/db/locate.database) does not exist
I tried using pip-3.2 as recommended in one of the other questions' solutions (which worked for that OP), and I get the same command not found error message.
I'm using OS X 10.8.5
pip is different from pip3. So you might need to install it if it can't be found. If it is installed run this:
sudo updatedb
this will update the locate function.
if you're using conda why do you want to install it with pip anyways?
Jupyter is the new version of ipython. running conda install ipython installs ipython (now jupyter).