Related
Wanted to check if CONCATENATE is the one to use (not sure if my excel has TEXTJOIN), and how to show just the text that has empty value in the cells.
For example in my attachment below, I want the intended result shown like in B2 and B3, where the texts shown with delimiter, when the values are false (empty).
If I were to use CONCATENATE like in Row 10 and Row 11, it's rather manual and it only capture "positive values" as in non-blank cells.
Purpose: To show pending tasks (empty/blank status cells)
Use MID with CONCATENATED IFS:
=MID(IF(C2="","/"&$C$1,"")&IF(D2="","/"&$D$1,"")&IF(E2="","/"&$E$1,"")&IF(F2="","/"&$F$1,"")&IF(GC2="","/"&$G$1,"")&IF(H2="","/"&$H$1,""),2,999)
I would use TEXJOIN and FILTER if you have the newest version of Excel.
For example: =TEXTJOIN("/",1,FILTER($E$2:$I$2, ISBLANK(E3:I3)))
EDIT: For older versions, a temporary workaround is as follows:
make a temporary array the same size as your original dataframe where each value is determined by a formula such as =IF(ISBLANK(E3), E$2&"/","")
Use something like =LEFT(CONCAT(E15:J15), LEN(CONCAT(E15:J15))-1) to get the desired result (where E15:J15 is where I elected to store the first row of the temporary array created in step 1).
I am not sure of your Excel version, but I think this would work in older versions (formatted for readability - will work if you paste it directly into cell B2 and copy down):
=LEFT(CONCAT( INDEX( CHOOSE({1;2;3},$C$1:$H$1,{"/","/","/","/","/","/"},{"","","","","",""}),
INDEX( IF(ISBLANK(C2:H2),{1;2},{3;3}),
MOD(COLUMN(A1:INDEX(1:1,,12))-1,2)+1,
(COLUMN(A1:INDEX(1:1,,12))-1)/2+1 ),
(COLUMN(A1:INDEX(1:1,,12))-1)/2+1 ) ),
SUM(7*ISBLANK(C2:H2))-1 )
Notes
As this is an array formula, you may have to enter it with CTRL + SHIFT + ENTER with an older version of Excel.
The stat labels must all have a length of 6 characters as shown in your post. If not, then they must at least have the same length and the last line SUM(7*ISBLANK(C2:H2))-1 must be changed to replace the 7 with the string length + 1, e.g. a length of 9 would be SUM(10*ISBLANK(C2:H2))-1.
If they don't have the same length, the LEFT( can be removed along with the SUM(10*ISBLANK(C2:H2))-1) at the end. You will end up having a trailing / delimiter at the end. You could fix that for the case of stat F being the last part by changing {"/","/","/","/","/","/"} to {"/","/","/","/","/",""}, but the other cases would still have a trailing /. Another approach is much more complex, but the component SUM(10*ISBLANK(C2:H2))-1) could be shaped to identify what to cut off or maybe a helper column could be built - in any case, let's hope your situation is that the stat labels all have the same length.
The delimiter "/" can be changed, but must always be a single character. If not, then then last line must be changed to SUM( [label length + delimiter length] *ISBLANK(C2:H2))-1.
This formula is fixed to 6 stat columns. If you need for it to accommodate more, it is possible by extending the {"/","/","/","/","/","/"} and {"","","","","",""} (one element for each new column) and replacing every 12 with 2 times the number of columns. Also, obviously, the references $C$1:$H$1 and C1:H2 must be changed to read in your new columns.
This is a slightly more complicated issue than a simple =COUNTIF(rng,"*"&value&"*"), as found here.
I have a 2D array with cells containing data such as:
abc
def
abc def
ghi
abc,def,ghi
abcdef
ghi; def
..... and several other variations of this. I am trying to count exact matches of "abc", but I want the count to be inclusive of cells containing "abc def" and other like variations, however I can't just use the above simple COUNTIF formula since "abcdef" is not an acceptable match. The target string must stand alone or be separated from other text by an acceptable character in chars.
I think I've got this one 90% done, but the bit I need help with is combining all the possible acceptable variations of a target "name" into a flat range that I can then check my data source against for the COUNTIF. I've tried INDEX(r_1:r_8,idxRow,idxCol) and other familiar solutions that work on the sheet when referencing other ranges, but I'm new to using the =LET function. All of this works well when broken out into separate components on my spreadsheet, but I'm looking for a cleaner solution with =LET. See below for current formula:
=LET(rg, DataTable[[Q14_1]:[Q14_9]],
name, AU38,
chars, {" ",",",";"},
r, 8,
r_1, CONCATENATE(name,chars),
r_2, CONCATENATE(chars,name),
r_3, CONCATENATE(chars,name,chars),
r_4, CONCATENATE(name,chars,"*"),
r_5, CONCATENATE("*",chars,name),
r_6, CONCATENATE(chars,name,chars,"*"),
r_7, CONCATENATE("*",chars,name,chars),
r_8, CONCATENATE("*",chars,name,chars,"*"),
c, COUNTA(chars),
mSeq, SEQUENCE(r*c),
idxRow, 1+MOD(mSeq,r),
idxCol, INT((SEQUENCE(r*c)-1)/r)+1,
X, INDEX(**NeedHelpHere**,idxRow,idxCol),
SUM(COUNTIF(rg,name),COUNTIF(rg,X))
)
Give a try on below formula. If you have more delimiter like space, comma & others then you need to use more SUBSTITUTE() function.
=LET(x,FILTERXML("<t><s>"&SUBSTITUTE(SUBSTITUTE(A1:A7," ","</s><s>"),",","</s><s>")&"</s></t>","//s"),y,FILTER(x,x="abc"),SUM(--(y<>"")))
To learn about FILTERXML() please read this article from JvdV.
I've thought about this again and am posting a solution that fits my needs.
I don't need to index a single column of potential matches to then COUNTIF, I can just COUNTIF multiple times. Additionally, I was not taking into account different combinations of chars, I was only searching for the same chars on either side of the target (e.g. ",abc," when I should have also been looking for ",abc;"). Transposing the chars array on one side is a simple way of fixing this. It also turns out that "*"&target&"*" searches for "*target*" AND "target" (duh!), so I simplified further, removing duplicative possibilities.
My final formula is below, which counts the number of times target (by itself or surrounded by any acceptable chars) is present in a given rng:
=LET(rng, DataTable[Q14_1]:[Q14_9]]),
name, $A6,
chars, {" " , "," , ";"},
r_1, CONCATENATE(name,chars,"*"),
r_2, CONCATENATE("*",chars,name),
r_3, CONCATENATE("*",chars,name,TRANSPOSE(chars),"*"),
SUM(COUNTIF(rng,name),COUNTIF(rng,r_1),COUNTIF(rng,r_2),COUNTIF(rng,r_3))
)
I have built a large data set and I need to see the average results given many different criteria. I've done this with the AVERAGEIFS function and it works just fine, however the more and more I add its getting really time intensive.
I'm wondering if there is a way to nest a vlookup or index match or anything like that in the AVERAGEIFS that read the criteria column heading and criteria in a cell (or 2 if they need to be separated) to be added to the AVERAGEIFS.
Here is an example of my spreadsheet:
The first 3 sets of criteria I want to stay locked.
I want it to read what the 4th criteria column and criteria should be by referencing the I11 cell. The highlighted portion in the formula bar is the part that I want to reference I11 so it reads it and knows that the 4th criteria is the 'code' column and the criteria is '>7'. I can separate this into 2 separate cells if need be.
I've tried a few combinations of VLOOKUP and INDEX MATCH but cannot get it to work.
Data as Text:
Price,Type,sub cat,Time,code,amount,Result,,
,,,,,,,,
9.95,t2,d,ac,2.18," 22,780,893 ",0.73,,T2 and D and AC
118.94,u2,d,bo,2.78," 172,110,893 ",4.07,,
57.63,t1,u,ac,7.09," 128,419,877 ",-2.16,,code
8.88,t2,d,ac,1.50," 62,634,868 ",12.72,,amount < 100 000 000
11.61,u1,u,ac,2.14," 146,982,736 ",1.07,,price >10
13.46,u3,u,ac,0.93," 17,513,672 ",-13.93,,
31.53,t1,u,ac,0.89," 47,170,877 ",1.39,,
16.34,t3,d,bo,1.07," 1,914,767,076 ",-1.42,,
111.59,u1,d,bo,0.62," 2,283,546,000 ",0.67,,
72.4,u3,d,bo,10.37," 951,541,514 ",1.13,,
34.55,u3,d,bo,0.77," 951,541,514 ",-2.52,,
42.25,t1,d,bo,1.05," 63,748,352 ",8.88,,
17.18,u3,u,ac,2.64," 140,217,257 ",4.35,,
97.66,t1,d,bo,3.45," 1,070,383,954 ",1.33,,
58.49,t2,u,bo,8.64," 151,876,559 ",-0.92,,
64.48,t2,d,ac,2.35," 291,967,334 ",3.03,,
38.4,t1,u,ac,17.05," 83,478,472 ",-4.31,,
20.87,u3,d,ac,28.92," 214,080,937 ",-2.16,,
36.53,t1,d,ac,1.43," 73,438,589 ",-2.07,,
89.16,t3,u,ac,1.41," 26,786,958 ",-1.75,,
15.84,t1,u,bo,2.90," 133,560,818 ",1.76,,
3.2,u3,u,bo,2.95," 215,677,667 ",-1.06,,
25.46,t1,d,bo,3.92," 57,148,431 ",1.89,,
40,t2,d,ac,8.00," 65,274,903 ",0.61,,
27.72,t1,u,ac,2.50," 381,400,886 ",6.46,,
29.07,u3,u,ac,2.32," 52,632,107 ",-0.78,,
173.31,t1,d,ac,3.58," 31,547,380 ",-4.92,,
18.22,u3,d,ac,0.58," 292,669,493 ",4.06,,
9.59,t1,d,bo,3.60," 266,883,020 ",3.16,,
115.22,t2,d,bo,4.51," 132,376,476 ",0.78,,
64.48,u3,d,ac,3.03," 338,360,104 ",-0.95,,
41.74,t1,u,bo,25.65," 245,766,436 ",-3.42,,
5.99,t3,u,bo,2.15," 175,054,713 ",-4.37,,
Use INDEX/MATCH to return the correct column. This will require that you separate the column name and the criteria:
=AVERAGEIFS(G:G,B:B,"T2",C:C,"D",D:D,"AC",INDEX(A:F,0,MATCH(I11,$A$7:$G$7,0)),J11)
An idea:
I10 - "Write down the limitation. (You have to use <,>,=,<> AND the value, for e.g.: <5)"
I11 - The user can use relations and values.
In J11, you can reference to I11 ;) It works for me.
I have two tables in excel.
In table 1, one column contains a list of order numbers. This is done the format of XXXX-YYYY where X is an integer and Y is a letter. For example 3485-XTIP
Table 2 also has an order number column but this time it's in the format XXXX-YYYY (ZZ) where Z is the initials of the customer who made the order. Example: 3485-XTIP (KN)
How can I use a VLookUp to search for the order number in Table 2 but only using the XXXX-YYYY part? I tried using TRUE for an approximate search but it still failed for some reason.
This is what I have
=VLOOKUP("I3",'Table2 '!A:B,2,FALSE)
I am open to any alternatives other than VLookup for this situation.
Note that there are hundreds of order numbers and entering the strings manually will take forever.
You can use * as wildcard and add it at the end of the order number so that your VLOOKUP will match any order plus any other characters that come after it:
=VLOOKUP(I3&"*", 'Table2 '!A:B, 2, 0)
* will match anything after the order number.
Note: 0 and False have the same behaviour here.
I need to be able to search my whole table for a row that matches multiple criteria. We use a program that outputs data in the form of a .csv file. It has rows that separate sets of data, each of these headers don't have any columns that are unique in of them self but if i searched the table for multiple values i should be able to pinpoint each header row. I know i can use Application.WorksheetFunction.Match to return a row on a single criteria but i need to search on two three or four criteria.
In pseudo-code it would be something like this:
Return row number were column A = bill & column B = Woods & column C = some other data
We need to work with arrays:
There are 2 kinds of arrays:
numeric {1,0,1,1,1,0,0,1}
boolean {TRUE,FALSE,TRUE,TRUE,TRUE,FALSE,FALSE,TRUE}
to convert between them we can use:
MATCH function
MATCH(1,{1,0,1,1,1,0,0,1},0) -> will result {TRUE,FALSE,TRUE,TRUE,TRUE,FALSE,FALSE,TRUE}
simple multiplication
{TRUE,FALSE,TRUE,TRUE,TRUE,FALSE,FALSE,TRUE}*{TRUE,FALSE,TRUE,TRUE,TRUE,FALSE,FALSE,TRUE} -> will result {1,0,1,1,1,0,0,1}
you can can check an array in the match function, entering it like in the picture below, be warned that MATCH function WILL TREAT AN ARRAY AS AN "OR" FUNCTION (one match will result in true
ie:
MATCH(1,{1,0,1,1,1,0,0,1},0)=TRUE
, YOU MUST CTR+SHIFT+ENTER !!! FOR IT TO GIVE AN ARRAY BACK!!!
in the example below i show that i want to sum the hours of all the employees except the admin per case
we have 2 options, the long simple way, the complicated fast way:
long simple way
D2=SUMPRODUCT(C2:C9,(A2=A2:A9)*("admin"<>B2:B9)) <<- SUMPRODUCT makes a multiplication
basically A1={2,3,11,3,2,4,5,6}*{0,1,1,0,0,0,0,0} (IT MUST BE A NUMERIC ARRAY TO THE RIGHT IN SUMPRODUCT!!!)
ie: A1=2*0+3*1+11*1+3*0+2*0+4*0+5*0+6*0
this causes a problem because if you drag the cell to autocomplete the rest of the cells, it will edit the lower and higher values of
ie: D9=SUMPRODUCT(C9:C16,(A9=A9:A16)*("admin"<>B9:B16)), which is out of bounds
same as the above if you have a table and want to view the results in a diferent order
the fast complicated way
D3=SUMPRODUCT(INDIRECT("c2:c9"),(A3=INDIRECT("a2:a9"))*("admin"<>INDIRECT("b2:b9")))
it's the same, except that INDIRECT was used on the cells that we want not be modified when autocompleting or table reorderings
be warned that INDIRECT sometimes give VOLATILE ERROR,i recommend not using it on a single cell or using it only once in an array
f* c* i cant post pictures :(
table is:
case emplyee hours totalHoursPerCaseWithoutAdmin
1 admin 2 14
1 him 3 14
1 her 11 14
2 him 3 5
2 her 2 5
3 you 4 10
3 admin 5 10
3 her 6 10
and for the functions to check the arrays, open the insert function button (it looks like and fx) then doubleclick MATCH and then if you enter inside the Lookup_array a value like
A2=A2:A9 for our example it will give {TRUE,TRUE,TRUE,FALSE,FALSE,FALSE,FALSE,FALSE} that is because only the first 3 lines are from case=1
Something like this?
Assuming that you data in in A1:C20
I am looking for "Bill" in A, "Woods" in B and "some other data" in C
Change as applicable
=IF(INDEX(A1:A20,MATCH("Bill",A1:A20,0),1)="Bill",IF(INDEX(B1:B20,MATCH("Woods",B1:B20,0),1)="Woods",IF(INDEX(C1:C20,MATCH("some other data",C1:C20,0),1)="some other data",MATCH("Bill",A1:A20,0),"Not Found")))
SNAPSHOT
I would use this array* formula (for three criteria):
=MATCH(1,((Range1=Criterion1)*(Range2=Criterion2)*(Range3=Criterion3)),0)
*commit with Ctrl+Shift+Enter