I am trying to install pybullet with Python3.7.9 as python3.7 -m pip install pybullet==2.7.3. I keep getting an error that says it can't find the version and as you can see from the full error below that the version is skipped in the error output.
However, PyPI seems to have the release of the package I am looking for.
Why is pip unable to find this version?
Full Error:
ERROR: Could not find a version that satisfies the requirement pybullet==2.7.3 (from versions: 0.1.2, 0.1.3, 0.1.5, 0.1.6, 0.1.7, 1.0.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4, 1.0.5, 1.0.6, 1.0.7, 1.0.8, 1.1.0, 1.1.1, 1.1.2, 1.1.3, 1.1.4, 1.1.5, 1.1.6, 1.1.7, 1.1.8, 1.1.9, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.2.6, 1.2.7, 1.2.8, 1.2.9, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.5, 1.3.6, 1.3.7, 1.3.8, 1.3.9, 1.4.0, 1.4.1, 1.4.2, 1.4.3, 1.4.4, 1.4.5, 1.4.6, 1.4.7, 1.4.8, 1.4.9, 1.5.0, 1.5.1, 1.5.2, 1.5.3, 1.5.4, 1.5.5, 1.5.6, 1.5.8, 1.5.9, 1.6.0, 1.6.1, 1.6.2, 1.6.3, 1.6.4, 1.6.5, 1.6.6, 1.6.7, 1.6.8, 1.6.9, 1.7.0, 1.7.1, 1.7.2, 1.7.3, 1.7.4, 1.7.5, 1.7.6, 1.7.7, 1.7.8, 1.7.9, 1.8.0, 1.8.1, 1.8.2, 1.8.3, 1.8.4, 1.8.5, 1.8.6, 1.8.7, 1.8.8, 1.9.1, 1.9.2, 1.9.3, 1.9.4, 1.9.5, 1.9.6, 1.9.7, 1.9.8, 1.9.9, 2.0.0, 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, 2.0.6, 2.0.7, 2.0.8, 2.0.9, 2.1.0, 2.1.1, 2.1.2, 2.1.3, 2.1.4, 2.1.6, 2.1.7, 2.1.8, 2.1.9, 2.2.0, 2.2.1, 2.2.2, 2.2.3, 2.2.4, 2.2.5, 2.2.6, 2.2.7, 2.2.8, 2.2.9, 2.3.0, 2.3.1, 2.3.2, 2.3.3, 2.3.4, 2.3.5, 2.3.6, 2.3.7, 2.3.8, 2.3.9, 2.4.0, 2.4.1, 2.4.2, 2.4.3, 2.4.4, 2.4.5, 2.4.6, 2.4.7, 2.4.8, 2.4.9, 2.5.0, 2.5.1, 2.5.2, 2.5.3, 2.5.4, 2.5.5, 2.5.6, 2.5.7, 2.5.8, 2.5.9, 2.6.0, 2.6.1, 2.6.2, 2.6.3, 2.6.4, 2.6.5, 2.6.6, 2.6.7, 2.6.8, 2.6.9, 2.7.0, 2.7.1, 2.7.2, 2.7.4, 2.7.5, 2.7.7, 2.7.8, 2.7.9, 2.8.1, 2.8.2, 2.8.3, 2.8.4, 2.8.5, 2.8.6, 2.8.7, 2.9.0, 2.9.1, 2.9.3, 2.9.4, 2.9.5, 2.9.6, 2.9.8, 3.0.0, 3.0.1, 3.0.2, 3.0.4, 3.0.6, 3.0.7, 3.0.8, 3.0.9, 3.1.0, 3.1.2, 3.1.3, 3.1.4, 3.1.5, 3.1.6, 3.1.7, 3.1.8, 3.1.9, 3.2.0, 3.2.2)
ERROR: No matching distribution found for pybullet==2.7.3
While the version exists, if you look at the files tab you will see that for that version only whl files for manylinux are available. Interestingly, for most over versions (all the ones listed in your error output), an additional source distribution (.tar.gz) is available, just not for that version, so it cannot be installed on MacOS from pypi.
The releases on github only go back to 2.86, so at this point it looks like you will have to pick one of the versions listed in your error message instead of 2.7.3
Related
tensorpack requires a tensorflow version >= 1.5 and < 2, but it can not be installed with pip:
Looking in indexes: https://pypi.org/simple, https://pypi.ngc.nvidia.com
ERROR: Could not find a version that satisfies the requirement tensorflow==1.15.5 (from versions: 2.5.0, 2.5.1, 2.5.2, 2.5.3, 2.6.0rc0, 2.6.0rc1, 2.6.0rc2, 2.6.0, 2.6.1, 2.6.2, 2.6.3, 2.6.4, 2.6.5, 2.7.0rc0, 2.7.0rc1, 2.7.0, 2.7.1, 2.7.2, 2.7.3, 2.8.0rc0, 2.8.0rc1, 2.8.0, 2.8.1, 2.8.2, 2.9.0rc0, 2.9.0rc1, 2.9.0rc2, 2.9.0, 2.9.1)
ERROR: No matching distribution found for tensorflow==1.15.5
I keep getting this error:
ERROR: Could not find a version that satisfies the requirement pandas==1.0.1 (from versions: 0.1, 0.2, 0.3.0, 0.4.0, 0.4.1, 0.4.2, 0.4.3, 0.5.0, 0.6.0, 0.6.1, 0.7.0, 0.7.1, 0.7.2, 0.7.3, 0.8.0, 0.8.1, 0.9.0, 0.9.1, 0.10.0, 0.10.1, 0.11.0, 0.12.0, 0.13.0, 0.13.1, 0.14.0, 0.14.1, 0.15.0, 0.15.1, 0.15.2, 0.16.0, 0.16.1, 0.16.2, 0.17.0, 0.17.1, 0.18.0, 0.18.1, 0.19.0, 0.19.1, 0.19.2, 0.20.0, 0.20.1, 0.20.2, 0.20.3, 0.21.0, 0.21.1, 0.22.0, 0.23.0, 0.23.1, 0.23.2, 0.23.3, 0.23.4, 0.24.0, 0.24.1, 0.24.2, 0.25.0, 0.25.1, 0.25.2, 0.25.3, 1.0.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4, 1.0.5, 1.1.0, 1.1.1, 1.1.2, 1.1.3, 1.1.4, 1.1.5, 1.2.0, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.3.0, 1.3.1, 1.3.2, 1.3.3)
ERROR: No matching distribution found for pandas==1.0.1
I can see the version 1.0.1 is there.
can anyone help me
I´m following the recommendations provided below
https://github.com/apache/airflow#installing-from-pypi
I've created a virtual env for this with
sudo python3 -m venv airflow-poc
and downgraded its pip version
sudo python -m pip install --force-reinstall pip==20.2.4
Tried with both Airflow 1.10.12 and 1.10.14. Both generated conflicts.
export AIRFLOW_VERSION=1.10.12
export PYTHON_VERSION="$(python --version | cut -d " " -f 2 | cut -d "." -f 1-2)"
export CONSTRAINT_URL="https://raw.githubusercontent.com/apache/airflow/constraints-${AIRFLOW_VERSION}/constraints-${PYTHON_VERSION}.txt"
pip install "apache-airflow[postgres,google]==${AIRFLOW_VERSION}" --constraint "${CONSTRAINT_URL}"
echo $PYTHON_VERSION
3.6
I tried with and without extras. With [postgresql, google]
ERROR: Could not find a version that satisfies the requirement Flask-AppBuilder==2.3.4 (from -c https://raw.githubusercontent.com/apache/airflow/constraints-1.10.12/constraints-3.6.txt (line 4)) (from versions: 0.1.3, 0.1.4, 0.1.5, 0.1.6, 0.1.7, 0.1.8, 0.1.9, 0.1.10, 0.1.11, 0.1.12, 0.1.13, 0.1.14, 0.1.15, 0.1.16, 0.1.17, 0.1.18, 0.1.19, 0.1.20, 0.1.21, 0.1.22, 0.1.23, 0.1.24, 0.1.25, 0.1.26, 0.1.27, 0.1.28, 0.1.29, 0.1.33, 0.1.34, 0.1.35, 0.1.36, 0.1.37, 0.1.38, 0.1.43, 0.1.44, 0.1.45, 0.1.46, 0.1.47, 0.2.0, 0.2.1, 0.2.2, 0.3.0, 0.3.1, 0.3.2, 0.3.3, 0.3.4, 0.3.5, 0.3.6, 0.3.7, 0.3.8, 0.3.9, 0.3.10, 0.3.11, 0.3.12, 0.3.13, 0.3.14, 0.3.15, 0.3.16, 0.3.17, 0.4.0, 0.4.1, 0.4.2, 0.4.3, 0.5.0, 0.5.1, 0.5.2, 0.5.3, 0.5.4, 0.5.5, 0.5.6, 0.6.1, 0.6.2, 0.6.3, 0.6.4, 0.6.5, 0.6.6, 0.6.7, 0.6.8, 0.6.9, 0.6.10, 0.6.11, 0.6.12, 0.6.13, 0.6.14, 0.7.0, 0.7.1, 0.7.2, 0.7.3, 0.7.4, 0.7.5, 0.7.6, 0.7.7, 0.7.8, 0.8.0, 0.8.1, 0.8.2, 0.8.3, 0.8.4, 0.8.5, 0.9.0, 0.9.1, 0.9.2, 0.9.3, 0.10.0, 0.10.1, 0.10.2, 0.10.3, 0.10.4, 0.10.5, 0.10.6, 0.10.7, 1.0.0, 1.0.1, 1.1.0, 1.1.1, 1.1.2, 1.1.3, 1.2.0, 1.2.1, 1.3.0, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.5, 1.3.6, 1.3.7, 1.4.0, 1.4.1, 1.4.2, 1.4.3, 1.4.4, 1.4.5, 1.4.6, 1.4.7, 1.5.0, 1.6.0, 1.6.1, 1.6.2, 1.6.3, 1.7.0, 1.7.1, 1.8.1, 1.9.0, 1.9.1, 1.9.2, 1.9.3, 1.9.4, 1.9.5, 1.9.6, 1.10.0, 1.11.0, 1.11.1, 1.12.0, 1.12.1, 1.12.2, 1.12.3, 1.12.4, 1.12.5, 1.13.0, 1.13.1, 2.0.0, 2.1.0, 2.1.1, 2.1.2, 2.1.3, 2.1.4, 2.1.5, 2.1.6, 2.1.7, 2.1.8, 2.1.9, 2.1.10, 2.1.11, 2.1.12, 2.1.13, 2.2.0rc1, 2.2.0rc2, 2.2.0)
ERROR: No matching distribution found for Flask-AppBuilder==2.3.4 (from -c https://raw.githubusercontent.com/apache/airflow/constraints-1.10.12/constraints-3.6.txt (line 4))
and without them
ERROR: Could not find a version that satisfies the requirement pandas==1.1.0 (from -c https://raw.githubusercontent.com/apache/airflow/constraints-1.10.12/constraints-3.6.txt (line 205)) (from versions: 0.1, 0.2b0, 0.2b1, 0.2, 0.3.0b0, 0.3.0b2, 0.3.0, 0.4.0, 0.4.1, 0.4.2, 0.4.3, 0.5.0, 0.6.0, 0.6.1, 0.7.0rc1, 0.7.0, 0.7.1, 0.7.2, 0.7.3, 0.8.0rc1, 0.8.0rc2, 0.8.0, 0.8.1, 0.9.0, 0.9.1, 0.10.0, 0.10.1, 0.11.0, 0.12.0, 0.13.0, 0.13.1, 0.14.0, 0.14.1, 0.15.0, 0.15.1, 0.15.2, 0.16.0, 0.16.1, 0.16.2, 0.17.0, 0.17.1, 0.18.0, 0.18.1, 0.19.0rc1, 0.19.0, 0.19.1, 0.19.2, 0.20.0rc1, 0.20.0, 0.20.1, 0.20.2, 0.20.3, 0.21.0rc1, 0.21.0, 0.21.1, 0.22.0, 0.23.0rc2, 0.23.0, 0.23.1, 0.23.2, 0.23.3, 0.23.4, 0.24.0rc1, 0.24.0, 0.24.1, 0.24.2)
ERROR: No matching distribution found for pandas==1.1.0 (from -c https://raw.githubusercontent.com/apache/airflow/constraints-1.10.12/constraints-3.6.txt (line 205))
WARNING: You are using pip version 20.2.4; however, version 20.3.1 is available.
Update your Python Version to atleast 3.6.1.
This is because pandas 1.1.0 has a requirement of Python >= 3.6.1
I uploaded a Python app to Heroku. In my requirements.txt file I have a line for ipython==7.18.1 but Heroku seems unable to retrieve it, I don't understand whether the problem is with the versions of python and ipython and which version i should use,so they match
The complete error thrown is:
ERROR: Could not find a version that satisfies the requirement ipython==7.17.0 (from -r /tmp/build_76afe907/requirements.txt (line 32)) (from versions: 0.10, 0.10.1, 0.10.2, 0.11, 0.12, 0.12.1, 0.13, 0.13.1, 0.13.2, 1.0.0, 1.1.0, 1.2.0, 1.2.1, 2.0.0, 2.1.0, 2.2.0, 2.3.0, 2.3.1, 2.4.0, 2.4.1, 3.0.0, 3.1.0, 3.2.0, 3.2.1, 3.2.2, 3.2.3, 4.0.0b1, 4.0.0, 4.0.1, 4.0.2, 4.0.3, 4.1.0rc1, 4.1.0rc2, 4.1.0, 4.1.1, 4.1.2, 4.2.0, 4.2.1, 5.0.0b1, 5.0.0b2, 5.0.0b3, 5.0.0b4, 5.0.0rc1, 5.0.0, 5.1.0, 5.2.0, 5.2.1, 5.2.2, 5.3.0, 5.4.0, 5.4.1, 5.5.0, 5.6.0, 5.7.0, 5.8.0, 5.9.0, 5.10.0, 6.0.0rc1, 6.0.0, 6.1.0, 6.2.0, 6.2.1, 6.3.0, 6.3.1, 6.4.0, 6.5.0, 7.0.0b1, 7.0.0rc1, 7.0.0, 7.0.1, 7.1.0, 7.1.1, 7.2.0, 7.3.0, 7.4.0, 7.5.0, 7.6.0, 7.6.1, 7.7.0, 7.8.0, 7.9.0, 7.10.0, 7.10.1, 7.10.2, 7.11.0, 7.11.1, 7.12.0, 7.13.0, 7.14.0, 7.15.0, 7.16.0, 7.16.1)
ERROR: No matching distribution found for ipython==7.17.0 (from -r /tmp/build_76afe907/requirements.txt (line 32))
Hi when I run this commands
pip install tensorflow==1.4.1
It not run and give the following error
Could not find a version that satisfies the requirement tensorflow==1.4.1 (from versions: 0.12.0rc0, 0.12.0rc1, 0.12.0, 0.12.1, 1.0.0, 1.0.1, 1.1.0rc0, 1.1.0rc1, 1.1.0rc2, 1.1.0, 1.2.0rc0, 1.2.0rc1, 1.2.0rc2, 1.2.0, 1.2.1, 1.3.0rc0, 1.3.0rc1, 1.3.0rc2, 1.3.0, 1.4.0rc0, 1.4.0rc1, 1.4.0, 1.5.0rc0, 1.5.0rc1, 1.5.0, 1.5.1, 1.6.0rc0, 1.6.0rc1, 1.6.0, 1.7.0rc0, 1.7.0rc1, 1.7.0, 1.7.1, 1.8.0rc0, 1.8.0rc1, 1.8.0, 1.9.0rc0, 1.9.0rc1, 1.9.0rc2, 1.9.0, 1.10.0rc0, 1.10.0rc1, 1.10.0)
No matching distribution found for tensorflow==1.4.1
please tell me that how I can install in cpu
This post is probably related to Tensorflow installation on Windows.
Tensorflow 1.4.1 was not built for Windows since changes introduced between 1.4.0 and 1.4.1 do not affect the behaviour of Tensorflow on Windows platform. If you want to have a compatible version of tensorflow, version 1.4.0 seems to be a logical choice.
So if running on Windows try instead
pip install tensorflow==1.4.0
This issue has been discussed on Tensorflow issue tracker as #15342.