I'm trying to write a simple cronjob that recurses through the folders & files nested in /OneDrive and replaces file or folder name characters that are not A-Z, a-z, 0-9, or . with an _. (This strikes me as the easiest way to resolve syncing errors.)
Building off this StackExchange post I've managed to get most of the way there using:
zmv '**/*' '$f:h${${f:t}//[^A-Za-z0-9]/_}'
This regex expression, however, does not exclude .'s, which results in all of the file extensions in all of my folders being changed to _s (e.g. file.txt becomes file_txt).
I'm far from an advanced regex user, and all of the various permutations of this command I've used have thrown errors, including:
zmv '**/*' '$f:h${${f:t}//[^\.A-Za-z0-9]/_}'
zmv '**/*' '$f:h${${f:t}//[^.A-Za-z0-9]/_}'
zmv '**/*' '$f:h${${f:t}//[^A-Za-z0-9\.]/_}'
I'm sure the correct regex expression is obvious; I'm afraid it's just not obvious to me.
If anyone could provide some guidance here, along with a brief explanation of why my previous attempts didn't work, I'd be grateful for the small contribution to my understanding of regex.
The :h modifier stripped out a slash; this has it added back in:
zmv '**/*' '$f:h/${${f:t}//[^\.A-Za-z0-9]/_}'
I'm not sure why that was missing from the original answer you referenced.
Some notes / caveats:
the -n option for zmv can be very helpful in tracking down issues like this.
a single call to zmv may not be able to rename both file names and directory names; multiple passes could be needed.
zmv uses file globbing patterns. Globbing patterns are similar to regular expressions, but there are a number of significant differences, so a lot of documentation for regexes will not apply here.
Related
I have found a simple solution to my actual requirement, but I would still like to understand how to use the regex equivalent of the single character wildcard ? which we use for filtering ... in say ls
I would like to rename a group of files which differ by one character.
FROM
Impossible-S01E01-x264.mkv
Impossible-S01E02-x264.mkv
Impossible-S01E03-x264.mkv
Impossible-S01E04-x264.mkv
Impossible-S01E05-x264.mkv
TO
Impossible-S01E01.mkv
Impossible-S01E02.mkv
Impossible-S01E03.mkv
Impossible-S01E04.mkv
Impossible-S01E05.mkv
As I said above, my simple solution is:
rename s/-x264// *.mkv
That sorts out my needs - all good and well - but I really want to understand my first approach:
To list the files, I can use:
ls Impossible-S01E0?-x264.mkv
So what I was trying for the rename was:
rename s/Impossible-S01E0?-x264.mkv/Impossible-S01E0?.mkv/ *.mkv
I have read up here:
How do regular expressions differ from wildcards used to filter files
And here:
Why does my regular expression work in X but not in Y?
I see this:
. matches any character (or any character except a newline).
I just can't seem to wrap my head around how to use that - hoping someone will explain for my education.
{ edit: missed a backslash \ }
So, regular expressions aren't globs. If you wanted to keep the middle (e.g. catch the season/ep) and replace everything else, you'd need to use capture groups. e.g. s/^.*(S\d+E\d+).*\.(.*?)$/Foo-$1.$2/
This would extract an SxxExx and the file extension, throw everything else away, and compose a new filename.
In a bit more detail it:
Matches everything from the start until an SxxExx (where xx is actually any number of digits)
Captures the contents of SxxExx
Matches everything until the final literal .
Non-greedily matches everything after the ., which it captures.
For your specific case of removing a suffix, this is likely overkill, though.
I have a folder that was created automatically. The user unintentionally provided smart (curly) quotes as part of the name, and the process that sanitizes the inputs did not catch these. As a result, the folder name contains the smart quotes. For example:
this-is-my-folder’s-name-“Bob”
I'm now trying to rename/remove said folder on the command line, and none of the standard tricks for dealing with files/folders with special characters (enclosing in quotes, escaping the characters, trying to rename it by inode, etc.) are working. All result in:
mv: cannot move this-is-my-folder’s-name-“Bob” to this-is-my-folders-name-BOB: No such file or directory
Can anyone provide some advice as to how I can achieve this?
To get the name in a format you can copy-and-paste into your shell:
printf '%q\n' this*
...will print out the filename in a manner the shell will accept as valid input. This might look something like:
$'this-is-my-folder200\231s-name-200\234Bob200\235'
...which you can then use as an argument to mv:
mv $'this-is-my-folder200\231s-name-200\234Bob200\235' this-is-my-folders-name-BOB
Incidentally, if your operating system works the same way mine does (when running the test above), this would explain why using single-character globs such as ? for those characters didn't work: They're actually more than one byte long each!
You can use shell globbing token ? to match any single character, so matching the smart quotes using ? should do:
mv this-is-my-folder?s-name-?Bob? new_name
Here replacing the smart quotes with ? to match the file name.
There are several possibilities.
If an initial substring of the file name ending before the first quote is unique within the directory, then you can use filename completion to help you type an appropriate command. Type "mv" (without the quotes) and the unique initial substring, then press the TAB key to request filename completion. Bash will complete the filename with the correct characters, correctly escaped.
Use a graphical file browser. Then you can select the file to rename by clicking on it. (Details of how to proceed from there depend on the browser.) If you don't have a graphical terminal and can't get one, then you may be able to do the same with a text-mode browser such as Midnight Commander.
A simple glob built with the ? or * wildcard should be able to match the filename
Use a more complex glob to select the filename, and perhaps others with the same problem. Maybe something like *[^a-zA-Z0-9-]* would do. Use a pattern substitution to assign a new name. Something like this:
for f in *[^a-zA-Z0-9-]*; do
mv "$f" "${f//[^a-zA-Z0-9-]/}"
done
The substitution replaces all appearances of a characters that are not decimal digits, appercase or lowercase Latin letters, or hyphens with nothing (i.e. it strips them). Do take care before you use this, though, to make sure you're not going to make more changes than you intend to do.
With Brunch is it possible during production build not to minimize certain js files (may be they are already minimised, or else) whilst still packing theses files along with the others ?
Thanks in advance
It certainly is possible. Quoting the docs of uglify-js-brunch,
Joined files can be ignored and be passed-through, using 'ignored' option:
config =
plugins:
uglify:
ignored: /non_minimize\.js/
(https://github.com/brunch/uglify-js-brunch)
The only requirement is that ignored be a regexp, so, for example, if you wanted to ignore several files, e.g. vendor/a.js and vendor/b.js, you'd go about it like this:
ignored: /^venodor\/a\.js|^vendor\/b\.js/
(You have to escape / to treat it as a slash because otherwise it'd be the regexp literal bounds marker, and . to interpret it as a dot and not a placeholder for any one character.)
In Linux how do I use find and regular expressions or a similar way without writing a script to search for files with multiple "dots" but IGNORE extension.
For e.g search through the following files will only return the second file. In this example ".ext" is the extension.
testing1234hellothisisafile.ext
testing.1234.hello.this.is.a.file.ext
The solution should work with one or more dots in the file name (ignoring the extension dot). This should also work for any files i.e. with any file extension
Thanks in advance
So if I understand correctly, you want to get the filenames with at least two additional dots in the name. This would do:
$ find -regex ".*\.+[^.]*\.+[^.]*\.+.*"
./testing.1234.hello.this.is.a.file.ext
./testing1234.hellothisisafile.ext
$ find -regex ".*\.+[^.]*\.+[^.]*\.+[^.]*\.+.*"
./testing.1234.hello.this.is.a.file.ext
The key dot detecting part is \.+ (at least one dot), coupled with the separating anything (but a dot, but the previous part covers it already; a safety measure against greedy matching) [^.]*. Together they make the core part of the regex - we don't care what is before or after, just that somewhere there are three dots. Three since also the one from the current dir matters — if you'll be searching from elsewhere, remove one \.+[^.]* group:
$ find delme/ -regex ".*\.+[^.]*\.+[^.]*\.+[^.]*\.+.*"
delme/testing.1234.hello.this.is.a.file.ext
$ find delme/ -regex ".*\.+[^.]*\.+[^.]*\.+.*"
delme/testing.1234.hello.this.is.a.file.ext
In this case the result is the same, since the name contains a lot of dots, but the second regex is the correct one.
I am getting files like .log and _log in a folder ,i am able to pick .log files with /*.log$/ but unable to find files which are _log .
need a regex pattern which will take both type of files from a specified folder.
Your question is tagged both 'perl' and 'linux'. I'll assume here that you're talking about Perl style regular expressions, as it looks like that's what you are showing in your example snippet.
The *. sequence is a mistake.
Let's focus on what you want to match. You want to match any filename that ends in a dot followed by the literal characters 'log'. You also want to match any filename that ends in an underscore, followed by the literal characters 'log'. You really shouldn't concern yourself with the "anything at all" that can come before the final dot or underscore. So the regexp would probably be better written as this:
/[._]log$/
Notice we don't even bother with the dot-star. It isn't helpful in this situation.
If you want for your pattern to also match files where the literal characters 'log' may optionally be followed by an integer sequence (not mentioned in your question, but discussed in one of your followup comments), you could write it like this:
/[._]log\d*$/
Here the 'star' is helpful; it allows for zero or more digits sandwiched between the 'g' and the end of the string.
I totally agree (by upvoting) with DavidO's solution but it usually makes more sense, and increase readability, to use glob() to get a list of files from a particular directory
my $dir = "/path/here";
my #log_files = grep { /[\._]log\d*$/ } glob("$dir/*");
print join "\n", #log_files;
This will catch
foo.log
foo_log
foo.log1
foo_log22
Use the regexp /.*[._]log$/.
I'm surprised your first case worked -- /*.log$/ isn't legal regexp (since the * doesn't say what it is supposed to match zero-or-more of). Double-check your current results.