Salvation
I want to control a computer from another one without installing any application. Bluetooth seems to be a solution.
So far, I have found and tried this app which uses Bluetooth (the second computer recognizes my cell as a Bluetooth mouse and keyboard). It works perfectly.
https://play.google.com/store/apps/details?id=io.appground.blek
Does this software exist for Windows ?
Thanks
Related
I'm trying to establish a connection between my PC running Ubuntu and my iPhone via Bluetooth automatically when it becomes available, after being manually paired beforehand. I've seen this to be possible with certain peripherals, mainly audio. For example, my phone will automatically connect to a Bluetooth speaker when it is turned on and Bluetooth is active on my phone; another example is my phone automatically connects to my car's radio system via Bluetooth when I turn the car on.
I'm not able to connect my phone to my PC without first initiating the connection from the smartphone's Bluetooth menu. I'm thinking that I could possibly write an application for the PC to attempt to connect to the device every few minutes or something, but it seems that the phone needs to be the device to initiate the connection.
The only information that I need for what I'm trying to do ultimately is that the devices can pair successfully. Essentially I'm trying to build a sort of proximity trigger between my phone and my PC without using Wi-Fi and GPS - I can't use these for some specific reasons.
Is there any way to make this happen?
Yes this should be doable as long as you use the Background Processing feature for iOS apps. In the example I'll give below, we'll have the PC be the peripheral and the phone be the central, but you can really have it working either way. You will need to do the following:-
First initial connection needs to be performed in the foreground (this is due to iOS's background limitations).
On the iOS side, you need an application that acts as a central that scans and connects to the remove device (check this example as a starting point).
Upon connection, you need to bond with the PC. Bonding is important as it will prevent you from having to do the pairing again in the future. However, pairing/bonding is managed by the iPhone's OS so you cannot write it in your application, so the workaround is to have an encrypted characteristic on the PC side that will force the iPhone to bond (this is covered later).
On the PC side, you need to have a BlueZ script that acts as a peripheral that is always advertising. You can do this using bluetoothctl (check the examples here and here).
Before you start advertising, you need to have a GATT server on the PC side (to do this, check this example).
When registering characteristics, ensure that one of them has the encrypt-read property (you can find a full list of the properties here).
Now when you attempt to read this characteristic from the iOS side, the two devices should bond (make sure that your PC is bondable which you can do this via these commands).
Once the devices are paired, your iOS app needs to be working in the background constantly scanning and attempting to connect to the same peripheral (have a look at this and this example).
You can find more useful information at the links below:-
Getting started with Bluetooth Low Energy
The Ultimate Guide to CoreBluetooth Development
How to manage Bluetooth devices on Linux using bluetoothctl
I am currently working on a project that make me control media center and a few domotic parts in my living room.
I have connected on my raspberry pi 3 a NAS, my Spotify account (with hifiberry, controls to close my amp, my PC and a few lights...
At first to control it all I programmed a web server that I can access on my phone. That made the job but it is not completely user friendly since I have to have my phone go to the interface and do whatever I have to... And I'm not a web designer 😁 it's far from perfect!
I've made some research and I have decided to build a bluetooth remote control (raspberry pi 3 do have Bluetooth low energy).
Since nothing exist as I want, it is going to be a custom one made with Arduino mini and hm10 module.
But I'm stuck on the raspberry part!
How can I read the Bluetooth data send by my remote and launch scripts according to the command sent?
Via a serial listener of some kind?
Yes, in fact, you should use a serial port to connect your pi with Bluetooth module.
You then use software input information for your purposes, but you must first implement the hardware and hardware interface first.
You can build application software with the Python programming language.
I have a windows 8.1 based lap top which supports Bluetooth.
I wrote a java based bluetooth server which gets connections from Android.
The issue is, the device sometimes get invisible(or to say not shown) on android devices.
I've tried with other laptops or Android phones, but sometimes it just doesn't get searched.
I think it's not about my java server program. Even if there's a problem with my program, it should at least be shown on the bluetooth search list of other devices.
I found a very crude solution about this issue.
Always running the 'change pc settings(not the exact name)' app of windows 8.1, and going to 'PC, devices' -> Bluetooth makes it always searchable. If I turn this off(I mean the 'change pc settings' app, not turning off bluetooth), the bluetooth cannot be found by other devices.
Why is this happening? My purpose is, bluetooth server must be turned on automatically after boot, but the reliability of the bluetooth device is failing my intention. However, since my crude solution above is temporarily solving my issue, I do not think it's a hardware issue.
So, my question is :
1) Why is this happening? And how can I mend this?
2) How can I run windows metro app through windows shell? If I can't find any other solution about this, I will have to write a batch script to always run the solution thing above.
Going to Change PC Settings>PC and devices>Bluetooth is initiating a Bluetooth device search. As a side effect, the Bluetooth is also made Discoverable (pairing mode). However, this Discoverable setting is temporary, only while the PC is searching for remote Bluetooth devices.
If you wish to keep Bluetooth Discoverable at all times, you need to check the "Allow Bluetooth devices to find this PC" button box, found in Bluetooth Settings. I found Bluetooth settings by right clicking the Bluetooth system icon. Can also be found in Devices and Printers, by right clicking the Bluetooth adapter icon.
I have built a home surveillance and alarm system with raspberry pi's.
What I need now is an easy and safe remote control to arm the system and disarm it.
The most workable solution is to have a wireless router in the middle.
Before stepping out in the door, take out my phone, connect to my home network and via a custom built web page arm my system. (Web page would run the arming scripts)
But for this I need to have a wireless router (currently I have a non wireless Ubiquiti Router Station Pro, no radio card on it) and need to enable wireless on my phone (it is not enable-d, battery reasons) before leave, connect and so on. It is not one click unfortunately...
Other solution is to have just a wireless dongle in the Raspberry PI and do an Ad Hoc WiFi connection with my phone. My phone is Sony Ericson Xperia. Over here my technical knowledge hits the limit. It is possible to broadcast an Ad Hoc network over Raspberry PI I do not know if I can reach it from my Sony Ericson Xperia phone.
Third option is Bluetooth. I know very little about Bluetooth. I do not know how safe it is, and how to program it, to have on and off switch on my phone. However this might be the most promising.
Fourth option is to use the Pi Face. Link one or two switches to some type of receiver device. Have a sender device on my key chain and control it from there.
However I do not know from where I can buy such a safe remote control and if it is compatible with Pi Face.
Fifth option. To get home alarm system components and link those with the Pi Face. But I do not know what component might fit.
The best user scenario is the following.
User takes out out a device (phone or remote control) and presses arm/disarm.
User has appropriate time (30 sec) to get out or shut down.
If the remote device had run out from battery still have something to shut it down.
So my question does any body knows a fast, easy, cheap solution how to do this?
Though Bluetooth's security is questionable, it seems like the best option for your goal. Next to an adhoc
Bluetooth is not complicated.
On your mobile phone, if you don't want to make your own app you can look for some sort of Bluetooth Terminal or Bluetooth Chat. On your raspberry pi you'll have to setup a bluetooth rfcomm server with bluez.
How to configure Linux to act as a Bluetooth RFCOMM SPP server?
RFCOMM without pairing using PyBluez on Debian?
Modify these servers which do nothing by default, to listen for commends "arm" and "disarm". Make sure the ID of the device is the ID of your phone.
Ad-Hoc is even less complicated (assuming you know how to make a webserver and are going to make it secure enough, and have a dongle which supports adhoc):
Here is a post about ad-hoc networking with a raspberry pi.
In terms of distance, you'll have to see the specifications on your dongle(s) but I would say they're relatively the same.. your bluetooth dongle will have a class see Bluetooth Basics: Range. This will require more research but if you have either one of the dongles I would use that method.
I hope this helps, good luck setting up your alarm.
In the mean time I realized that a fast arming could be done via the Pi Face and pressing a button.
Disarming could go by other ways.
However the fastest solution would be a fingerprint button linked safely to Pi Face.
Updates. Finally went with the Ad-Hoc method:
This is the tutorial for it:
http://elinux.org/RPI-Wireless-Hotspot
I'm trying to create an app which powers an external accessory but I am not sure how to do it. Any hints or ideas?
All i plan on doing right now is have a UIView app that sends power to an external accessory.
Is this something that you would even code?
I would have thought that you just have a small amount of power to the device, regardless of the software running on the iphone/ipad/itouch.
That's going to be tricky and probably not in the scope of coding. First, you'd probably need to be a member of the Apple Made For iPhone (MFi) program and have to build your device to work in those specs.
Then you'd need to have the iOS device become the master USB device and your device become a slave (if I remember my USB controller configurations correctly - it's been 6 years).
But your first step is to get into the MFi program.
http://developer.apple.com/programs/mfi/