I have a simple dataset that I am trying to use in the Charticulator visual in Power BI.
Column
Used As
Date
X-Axis
Hour
Y-Axis
Score
Shape Fill
My initial attempt at using Charticulator in Power BI is below.
My questions are:
Is there any way to center the chart on the page?
How would I center the X-Axis tick-marks under the data?
I can change the width and height of the Glyphs in properties. However, I cannot change them in the Glyph Editor. If I grab a blue dot and drag it anywhere, it simply rubberbands back to it's original location. Am I using the Glyph Editor incorrectly?
Related
I'm trying to plot 6 timeseries side by side in excel. The default 3d bar charts and surface plots almost do the right thing. The problem is the timeseries are laid on the z-axis as I expected but they're jammed so close together you can't read the labels.
I've tried changing the tick interval and re-sizing the chart. Re-sizing the chart only seems to affect the x and y axis lengths leaving the z-axis pretty much the same short useless length.
How do I change the z-axis length in Excel?
To adjust the z-axis size, do the following:
Select Layout/3D Rotation on the ribbon. A 3d rotation dialog box opens.
Ensure 3D Rotation is highlighted on the dialog's left pane and then deselect Autoscale at bottom the right pane in the dialog box.
To lengthen the z-axis, increase the Depth percentage from 100 to 200, 300 or whatever is needed to accommodate your z-axis labels.
A few other points - the graph itself is contained in a picture within the chart panel. You can lengthen the z-axis somewhat by clicking on the chart to select the chart's frame and then resize the frame.
If you're plotting time series data using the 3d bar graph, you can click on a specific bar and Excel will show you the datum value that produced the bar.
To look on the backside of the graph to see if there are hidden values, set the x-axis rotation to 135. Lengthening the z-axis alleviates the issue somewhat as it spreads the series further apart and lets you see "behind" the front series a bit better.
I have created a curve in Excel 2013.
At the Y-Axis I am showing some values that show the probability for survival for each 100.000 citizen. Now my problem is, that I want to also show it in percentage, at the right side of the Y-Axis.
How do I do this?
Thanks in advance.
Ps. I have added an the curve as an image, so that you can see how it looks at the moment.
Add a secondary (Y) axis:
Create a combo chart with a secondary axis
When the numbers in a chart you created vary widely from data series to data series, or when you have mixed types of data (for example, price and volume), you can plot one or more data series on a secondary vertical (value) axis. The scale of the secondary vertical axis shows the values for the associated data series. A secondary axis works well in a chart that shows a combination of column and line charts.
Combo chart with secondary axis
In Microsoft Excel 2013, you can quickly show a chart like the one above by changing your chart to a combo chart.
Click anywhere in the chart you want to change to a combo chart to show the Chart Tools.
Chart Tools
Click Design > Change Chart Type.
Type group on the Design tab
On the All Charts tab, choose Combo, and then pick the Clustered Column - Line on Secondary Axis chart.
Combo chart with secondary axis on All Charts tab
Under Choose the chart type and axis for your data series, check the Secondary Axis box for each data series you want to plot on the secondary axis, and then change their chart type to Line.
Make sure that all other data series are shown as Clustered Column.
To clarify what is plotted on each of the vertical axes, you can add axis titles.
.
If I understood you correctly, you only need a right axis that shows a percentage scale, with, e.g., the tick mark for 100% at the same level as the tick mark for 100000 on the left axis.
You do not need any additional curves.
Then, you need to:
Create some dummy data. You may use two cells, which will give you a series with a single data point. Use 10 (X range) and -1 (Y range). Depending on the options you selected for your y axis, you may have to set the Minimum value fixed at 0 (you can do this now or later).
Add it to the plot.
Assign it to a secondary y-axis. Right-click on the series, Format Data Series -> Series Options -> Secondary Axis. Or, if you find it difficult to select it this way, select the chart, Go to Format, select the series from the pull-down menu on the top left, and Format Selection.
Format the right axis scale to give you a correct matching with the left scale. Right click on the secondary y axis, set the Minimum fixed at 0, the Maximum fixed at 1.2 (to match the figure you posted), and the number format as Percentage. PS: there will be a tick label "120%" on the right axis. That will not look good for what you are plotting. It will be best to set the Maximum of the left axis to 115000 (say), and the right axis to 1.15 then.
I'm looking for a multiple axis line chart similar to the one in the image below, (which is a javascript chart made by amcharts).
Does excel have an option to draw charts line these? Note there are 3 Y axes, and 3 line charts allowing you to compare data.
Is it possible to get more than 3 data points, each with unique axis on one chart ?
It is possible to get both the primary and secondary axes on one side of the chart by designating the secondary axis for one of the series.
To get the primary axis on the right side with the secondary axis, you need to set to "High" the Axis Labels option in the Format Axis dialog box for the primary axis.
To get the secondary axis on the left side with the primary axis, you need to set to "Low" the Axis Labels option in the Format Axis dialog box for the secondary axis.
I know of no way to get a third set of axis labels on a single chart. You could fake in axis labels & ticks with text boxes and lines, but it would be hard to get everything aligned correctly.
The more feasible route is that suggested by zx8754: Create a second chart, turning off titles, left axes, etc. and lay it over the first chart. See my very crude mockup which hasn't been fine-tuned yet.
The picture you showd in the question is actually a chart made using JavaScript. It is actually very easy to plot multi-axis chart using JavaScript with the help of 3rd party libraries like HighChart.js or D3.js. Here I propose to use the Funfun Excel add-in which allows you to use JavaScript directly in Excel so you could plot chart like you've showed easily in Excel. Here I made an example using Funfun in Excel.
You could see in this chart you have one axis of Rainfall at the left side while two axis of Temperature and Sea-pressure level at the right side. This is also a combination of line chart and bar chart for different datasets. In this example, with the help of the Funfun add-in, I used HighChart.js to plot this chart.
Funfun also has an online editor in which you could test your JavaScript code with you data. You could check the detailed code of this example on the link below.
https://www.funfun.io/1/#/edit/5a43b416b848f771fbcdee2c
Edit: The content on the previous link has been changed so I posted a
new link here. The link below is the original link
https://www.funfun.io/1/#/edit/5a55dc978dfd67466879eb24
If you are satisfied with the result you achieved in the online editor, you could easily load the result into you Excel using the URL above. Of couse first you need to insert the Funfun add-in from Insert - My add-ins. Here are some screenshots showing how you could do this.
Disclosure: I'm a developer of Funfun
There is a way of displaying 3 Y axis see here.
Excel supports Secondary Axis, i.e. only 2 Y axis. Other way would be to chart the 3rd one separately, and overlay on top of the main chart.
An alternative is to normalize the data. Below are three sets of data with widely varying ranges. In the top chart you can see the variation in one series clearly, in another not so clearly, and the third not at all.
In the second range, I have adjusted the series names to include the data range, using this formula in cell C15 and copying it to D15:E15
=C2&" ("&MIN(C3:C9)&" to "&MAX(C3:C9)&")"
I have normalized the values in the data range using this formula in C15 and copying it to the entire range C16:E22
=100*(C3-MIN(C$3:C$9))/(MAX(C$3:C$9)-MIN(C$3:C$9))
In the second chart, you can see a pattern: all series have a low in January, rising to a high in March, and dropping to medium-low value in June or July.
You can modify the normalizing formula however you need:
=100*C3/MAX(C$3:C$9)
=C3/MAX(C$3:C$9)
=(C3-AVERAGE(C$3:C$9))/STDEV(C$3:C$9)
etc.
Taking the answer above as guidance;
I made an extra graph for "hours worked by month", then copy/special-pasted it as a 'linked picture' for use under my other graphs. in other words, I copy pasted my existing graphs over the linked picture made from my new graph with the new axis.. And because it is a linked picture it always updates.
Make it easy on yourself though, make sure you copy an existing graph to build your 'picture' graph - then delete the series or change the data source to what you need as an extra axis. That way you won't have to mess around resizing.
The results were not too bad considering what I wanted to achieve; basically a list of incident frequency bar graph, with a performance tread line, and then a solid 'backdrop' of hours worked.
Thanks to the guy above for the idea!
Best and Free ( maybe only) solution for this is google sheets.
i don't know whether it plots as u expected or not but certainly you can draw multiple axes.
Regards
keerthan
In my graph, the x axis are text values. When I make the graph, I cannot stretch it to the whole width. Instead, it takes only less than half of the width.
I usually do this by clicking on "Format Axis", but it doesn't offer that in this case.
Here is the screenshot:
I'm using Excel for Mac.
When you made the chart, did you select a bunch of empty rows below the range that actually contains data? Looks like twice as much empty data as data with values.
If you select the plot area or chart area, you can see the source data of the chart highlighted in the sheet. You can resize the highlighted range with the mouse to modify the amount of data in the chart.
Did they made different types for windows and mac? I'm using windows and scaling is never a problem here.
I can't give you any answer but I can give you a suggestion. Can you check the width of the numbers below the 'Number of public SLA templates' label? Its occupying all the width of your window.
I'm using Excel 2007 to create a log-scale chart of numbers (specifically the Zimbabwean dollar exchange rate) over time. I'm using an x-y scatterplot and noticing one odd quirk.
The range of y values (numbers) spans a factor of about 10^30. On every chart I make using this data, half the gridlines are missing. Specifically, only the gridlines corresponding to the largest values show up. In fact, regardless of the total range only the top factor of 10^13 or so have gridlines. This is not dependent on the log base.
Am I doing something wrong? Is this a known bug? I can't find any references to this issue on google or microsoft's bug reports.
Silly work around as well, but if you are going to be presenting your graph in Powerpoint, you can make the background color of the graph "no fill" and then when you paste it into Powerpoint (I paste it as a PDF). You can draw grid lines and match them up with the ticks on the y-axis. Arrange your graph "bring to front" when you are finished drawing so that the lines won't appear in front of your data. You can group it all to make sure the lines don't shift while making your presentation and so that they re-size properly if you re-size your graph.
I'm having the same problem, it's definitely a bug.
Try a sequence 1, 10, 100, 1e+12, 1e+30 vs 0..4 and plot x,y scatter, and clearly the scale grid is messed-up even in linear, and in log is the behaviour you described.
My workaround was to make a transformation of the values and depict them scaled down (by a Million factor). That way the data the graph is handling is never above 10e9 (the value I started to hit issues).
So, my suggestion is: graph a Log version of the data (and clearly make a legend for it)
I was able to replicate your problem and come up with a pseudo-workaround.
The formatting goes a bit funny, but all the lines show up if you right-click on the axis, select Format Axis. Under the Axis Options, there is a Horizontal Axis Crosses setting. Changing it from Automatic to Maximum Axis Value causes all the gridlines to appear.
Ran into same thing: Will not show log grid lines for y-axis ranging below 1e-7. Have need for dynamic range of 1e5 down to 1e-15. Tagging auto or max will show grid, but puts axis labels in non-useful place for display.
My workaround: used Open Office to get what I needed. Could not find useful solution in Excel 2010.