Let say I have a page content type. And this page has a field for a list of references (events in my case). By default, Contentful let me order them manually (drag and drop). But these events have a date and I would find more practical that they are ordered by date automatically instead.
Is there a way to do this?
IMPORTANT NOTE: I don't mean sorting in a query. I know how to do this. I mean the order inside Contentful when we edit. This is actually one of Contenful's weak point for me. As a developer I'd like tailor a little bit more what the end editor will see, especially on the "content" landing page.
Related
I have a custom page type for employees, and one of the fields is Location. I want to show/filter only employees in "San Jose" or "San Francisco" and used this WHERE condition below but it didn't work. Apparently, I missed something very basic. Could you help?
Location LIKE '%San%';
I did another test, where instead of page type, I used custom table with the exact field names and was able to filter using the same statement. On a related note, I'm new to Kentico and exploring which is more suitable for creating/maintaining a list of about 100 employees - Page Types or Custom Tables - with the ability to filter by department, location etc. Appreciated your input here as well. Best!
If you're adding the WHERE condition into a standard Kentico repeater or other data source, the syntax looks right except you do not need the semicolon ";".
You'll also want to double check the field name, and if you are limiting your query to certain columns (as is best practice especially for larger data sets) and be sure the field you are filtering on is being selected.
Regarding the management of your employee list, either method you've described will work. In that scenario it typically depends on who will be editing the content, and how frequently. It is more editor-friendly, in my opinion, to add those documents into the content tree. This also gives you quicker control over the order, and keeps it similar to how other content on the site is maintained. I also like to set up folders or other parent page types as categories if needed, so the documents can be dragged and dropped between them and it sets up a visual taxonomy that isn't possible if it's all stored in a table. Storing items in the tree also allows for workflow and versioning, as well as more granular control over permissions/access, if this is important to you.
It's awesome that you are thinking about how to best store your data in advance. There many factors to consider such as overall number of records, number of columns, the fact whether you need to use workflow, versioning, preview etc..
The best source of information regarding this would be this article which summarizes all options you have and gives clear explanations of which to use in which scenario.
And to your original question - What components are you using to display the data? Is the repeater? If so, can you make sure to set the Page types property to match the page type you are displaying? If the page types is not configured, Kentico will not load any custom fields because it doesn't know from which table it should load the data from.
Additionally make sure to either include the "Location" field in the Columns property or leave the columns blank (not recommended because then Kentico loads all columns which is like 200. when you count all from CMS_Document, CMS_Tree etc..)
Below is the framework that I use to debug whenever I wish to add a repeater and is facing some problem.
First get all the columns instead of accessing limited columns. Fetching all columns will make sure that I don't have any problem retrieving data.
If I am missing any particular column information name, then I would double check the column name.
I verify this by firing up SQL server management studio and access data from page type table or custom table.
If access to SQL server is not available(generally in Azure hosted solutions with restrictive access to DB), I would enable SQL debug from the settings and see what query repeater is generating to see if it is correct.
I've got a simple repeater that list links to uploaded documents using cms.file. I'm drawing a blank on adjust the ORDER BY based on publish date. I can't find anything here on this, so i apologize if this is a duplicate.
Best practice is to add custom field to page type (in this case cms.file or better create the new one) and set ORDER BY condition to this new field. There are also properties like DocumentModifiedWhen, DocumentCreatedWhen, DocumentCheckedOutWhen you can use.
I'm going to use DocumentModifiedWhen as the ORDER By statement.
There are two fields [DocumentPublishTo] and [DocumentPublishFrom] that you can think of using. These are the two fields which appear at the bottom of each form page by default.
I want to know if I can click a button in my XPage and dynamically create a Domino View and then show it in a panel control on the same page. The reason I want to do this is because I have a categorized view and I don't want to lose category data by using full text search. So I am thinking of creating a new view dynamically and pass my search parameters, like end date or start date, into the view selection formula.
Is it possible? Any other alternative solution is also welcome.
yes you can, but you don't want to. A Domino view takes space in the database and quite some time for its first use. So you end up with a lot of views taking space and the need to adjust database space after removal. Your response times will suck big time.
Categories as shown in Notes views are no web interaction pattern, so you might want to solve a problem that actually shouldn't exist.
The preferred method for Domino application is navigation / drill down over search. But you could do a FTSearch where you add your category to the search parameters and render your results in a repeat control instead of a view control. There you have more control over the look and feel.
Whether or not it's the best solution, the answer to the immediate question about creating a view on the fly is yes: the Database class has a couple "createView" methods to allow you to create a new view, either entirely from scratch or based on a named other view. From there, you can use the "setSelectionFormula" and "createColumn" methods in the created View to build what you want. You can't do EVERYTHING with those methods, but it may be enough.
One problem you'd likely run into is ACL access: you'll need Designer rights to the database, which a normal user most likely wouldn't have. If you use the sessionAsSigner object to fetch a signer version of the DB (say, "var signerDB = sessionAsSigner.getDatabase(database.getServer(), database.getFilePath())"), you can work from there. Off the top of my head, I don't remember if you will also have to up the "Maximum Internet access" setting on the last tab of the ACL to Designer as well, but you may.
I am assuming that you are referring to the problem that exists when you choose the documents based on the category. This is something that I find highly annoying and I wish that it was possible to turn this on and off. It makes sense for embedded views, but not for much else.
What I did to solve this was to include the category value in the next column. In this way that text could still be seen, even if it was a flat view.
Alternatively, you could also look into using a repeater control and create your own way of presenting the information. This would be used instead of a (Dynamic)ViewPanel control. You could then present the information any way you wanted as long as it is returned in the viewrow set.
Happy Programming!
I have scripts that react off of, for example, a client Recalc client event. For example, on my form I have a subtab that users may add or remove items from. Based on actions on this subtab (housing a child record of the parent) I would like a field on the parent to update (say to show a total from the children records).
As I was saying, these events seem to work fine if in edit mode but they do not work correctly in view mode. (even in view mode these child records have a "Delete" option at the end of each row in the subtab. This was provided by netsuite by default.
I wondered if anyone had any tips to best allow this parent field to update real time while in updating the subtab rows with the form in view mode.
Thanks.
You can make a custom field on the parent (header) whose value is determined by saved search. For instance, make a saved search that totals the line values by transaction. Be sure to make it filter by transaction in the Available Filters tab. Make the search public so everyone can use it.
Create the custom field that sources the total from the saved search. Make sure to uncheck the "Store Value" checkbox, as you don't want to store the data, you want to reference the search results. You do this on the Validation and Defaulting tab. You'll see a field for Saved Search there. Choose the search you created above.
As you remove/add/change lines on the transaction, the field updates accordingly. In essence, you don't need a single line of code to make this work - it's all in how you create the search and the custom field that references it.
I have a similar situation posted here.
The NetSuite team answered me by email, and it happens you can't really achieve this on the view mode: some API methods are not available. Their suggestion to my case (and I think it applies to yours too) was really to force a refresh on the whole page.
Of course, you can always achieve this accessing the DOM elements directly, but this isn't a best practice, as your code can stop working if these elements change on a version update.
I had the same problem, I'm not able to restrict on view or remove edit button. But, there was one alternative solution with workflows, you can deploy workflow on child record edit mode restrictions, then if the user clicks edit on view then the record will not be available to edit. This concern will apply to custom record as well.
I would like to add a field to a list with displays an Image, but acts as a hyperlink. In other words like the "Hyperlink or Picture" column, but "Hyperlink AND Picture" instead.
Where the two fields you input would be the URL to the image to display, and the URL of the hyperlink.
This must be possible. I notice that the Type (in a document library) column does just that, and also includes the views that are currently being used (in the case of a folder).
Is it possible to duplicate the computed Type field in a document library to read two other fields in the list (which will act as the image url, and the redirect link)? What would the CAML be?
Thanks in advance if anyone could offer any insight.
Arnhem
This can be done but you would need to develop a custom field type. As you have found, SharePoint's default rendering for pictures is without the hyperlink. You need to change how the rendering behaves in Display mode in your own custom field. Check Patterns in Custom Field Rendering for more info.
There are also several examples of creating custom field types on the web. The MSDN articles give a lot of detail about how it all works but don't let that put you off as it's not too tricky.