I have a matplotlib/pyplot plot that appears as I want, in that the axes show the required range of values from -1 to +1 on both the x and y axes. I have labelled the x and y axes. However I also wish to label the right-hand vertical axis with the text "Thinking" and the top axis with the text "Extraversion".
I have looked at the matplotlib documentation but can't get my code to execute using set_xlabel and set_ylabel. I have commented these lines out in my code so my code runs for now - but hopefully the comments will make it clear enough what I am trying to do.
import matplotlib.pyplot as plt
w = 6
h = 6
d = 70
plt.figure(figsize=(w, h), dpi=d)
x = [-0.34,-0.155,0.845,0.66,-0.34]
y = [0.76,0.24,-0.265,0.735,0.76,]
plt.plot(x, y)
plt.xlim(-1,1)
plt.ylim(-1,1)
plt.xlabel("Intraverted")
plt.ylabel("Feeling")
#secax = plt.secondary_xaxis('top')
#secax.set_xlabel('Extraverted')
#secay = plt.secondary_xaxis('right')
#secay.set_ylabel('Thinking')
#plt.show()
plt.savefig("out.png")
As #Mr. T pointed out, there is no plt.secondary_xaxis method so you need the axes object
import matplotlib.pyplot as plt
plt.figure(figsize=(6, 6), constrained_layout=True, dpi=70)
x = [-0.34,-0.155,0.845,0.66,-0.34]
y = [0.76,0.24,-0.265,0.735,0.76,]
plt.plot(x, y)
plt.xlim(-1,1)
plt.ylim(-1,1)
plt.xlabel("Intraverted")
plt.ylabel("Feeling")
secax = plt.gca().secondary_xaxis('top')
secax.set_xlabel('Extraverted')
secay = plt.gca().secondary_yaxis('right')
secay.set_ylabel('Thinking')
#plt.show()
plt.savefig("out.png")
Better, would be just to create the axes object from the start:
fig, ax = plt.subplots(figsize=(w, h), constrained_layout=True, dpi=d)
...
ax.plot(x, y)
ax.set_xlim(-1, 1)
...
secax = ax.secondary_xaxis('top')
...
fig.savefig("out.png")
Further note the use of constrained_layout=True to make the secondary yaxis label fit on the figure.
i solved it with plt.subplots()
import matplotlib.pyplot as plt
w = 6
h = 6
d = 70
plt.figure(figsize=(w, h), dpi=d)
x = [-0.34,-0.155,0.845,0.66,-0.34]
y = [0.76,0.24,-0.265,0.735,0.76,]
fig , ax1 = plt.subplots()
ax1.plot(x, y)
plt.xlim(-1,1)
plt.ylim(-1,1)
plt.xlabel("Intraverted")
plt.ylabel("Feeling")
ax2 = ax1.twinx()
plt.ylabel('right corner')
Related
I am facing a problem to plot the geometry in the python using matplotlib. I would like to have a plot which can have the equal lenth in all three axes (X, Y, Z). I have written below code but it does not show any equal axes in the obtained geometry.
How can I get the plot with equal axes?
def plotting(x, y, z, figname):
fig = plt.figure(figsize = (50,50))
ax = plt.axes(projection='3d')
ax.grid()
ax.scatter(x, y, z, c = 'r', s = 50)
ax.set_title(figname)
ax.set_xlabel('x', labelpad=20)
ax.set_ylabel('y', labelpad=20)
ax.set_zlabel('z', labelpad=20)
Matplotlib makes this very difficult. One way you could "achieve" that is by setting the same limits to xlim, ylim, zlim:
import numpy as np
import matplotlib.pyplot as plt
n = 1000
t = np.random.uniform(0, 2*np.pi, n)
p = np.random.uniform(0, 2*np.pi, n)
x = (4 + np.cos(t)) * np.cos(p)
y = (1.5 + np.cos(t)) * np.sin(p)
z = np.sin(t)
fig = plt.figure()
ax = fig.add_subplot(projection="3d")
ax.scatter(x, y, z)
ax.set_xlim(-4, 4)
ax.set_ylim(-4, 4)
ax.set_zlim(-4, 4)
plt.show()
Otherwise, your best bet is to use a different plotting library for 3D plots. Plotly allows to easily set equal aspect ratio. K3D-Jupyter and Mayavi uses equal aspect ratio by default.
I have the following plot:
import matplotlib.pyplot as plt
fig2 = plt.figure()
ax3 = fig2.add_subplot(2,1,1)
ax4 = fig2.add_subplot(2,1,2)
ax4.loglog(x1, y1)
ax3.loglog(x2, y2)
ax3.set_ylabel('hello')
I want to be able to create axes labels and titles not just for each of the two subplots, but also common labels that span both subplots. For example, since both plots have identical axes, I only need one set of x and y- axes labels. I do want different titles for each subplot though.
I tried a few things but none of them worked right
You can create a big subplot that covers the two subplots and then set the common labels.
import random
import matplotlib.pyplot as plt
x = range(1, 101)
y1 = [random.randint(1, 100) for _ in range(len(x))]
y2 = [random.randint(1, 100) for _ in range(len(x))]
fig = plt.figure()
ax = fig.add_subplot(111) # The big subplot
ax1 = fig.add_subplot(211)
ax2 = fig.add_subplot(212)
# Turn off axis lines and ticks of the big subplot
ax.spines['top'].set_color('none')
ax.spines['bottom'].set_color('none')
ax.spines['left'].set_color('none')
ax.spines['right'].set_color('none')
ax.tick_params(labelcolor='w', top=False, bottom=False, left=False, right=False)
ax1.loglog(x, y1)
ax2.loglog(x, y2)
# Set common labels
ax.set_xlabel('common xlabel')
ax.set_ylabel('common ylabel')
ax1.set_title('ax1 title')
ax2.set_title('ax2 title')
plt.savefig('common_labels.png', dpi=300)
Another way is using fig.text() to set the locations of the common labels directly.
import random
import matplotlib.pyplot as plt
x = range(1, 101)
y1 = [random.randint(1, 100) for _ in range(len(x))]
y2 = [random.randint(1, 100) for _ in range(len(x))]
fig = plt.figure()
ax1 = fig.add_subplot(211)
ax2 = fig.add_subplot(212)
ax1.loglog(x, y1)
ax2.loglog(x, y2)
# Set common labels
fig.text(0.5, 0.04, 'common xlabel', ha='center', va='center')
fig.text(0.06, 0.5, 'common ylabel', ha='center', va='center', rotation='vertical')
ax1.set_title('ax1 title')
ax2.set_title('ax2 title')
plt.savefig('common_labels_text.png', dpi=300)
One simple way using subplots:
import matplotlib.pyplot as plt
fig, axes = plt.subplots(3, 4, sharex=True, sharey=True)
# add a big axes, hide frame
fig.add_subplot(111, frameon=False)
# hide tick and tick label of the big axes
plt.tick_params(labelcolor='none', top=False, bottom=False, left=False, right=False)
plt.grid(False)
plt.xlabel("common X")
plt.ylabel("common Y")
New in matplotlib 3.4.0
There are now built-in methods to set common axis labels:
supxlabel
fig.supxlabel('common x label')
supylabel
fig.supylabel('common y label')
To reproduce OP's loglog plots (common labels but separate titles):
x = np.arange(0.01, 10.01, 0.01)
y = 2 ** x
fig, (ax1, ax2) = plt.subplots(2, 1, constrained_layout=True)
ax1.loglog(y, x)
ax2.loglog(x, y)
# separate subplot titles
ax1.set_title('ax1.title')
ax2.set_title('ax2.title')
# common axis labels
fig.supxlabel('fig.supxlabel')
fig.supylabel('fig.supylabel')
plt.setp() will do the job:
# plot something
fig, axs = plt.subplots(3,3, figsize=(15, 8), sharex=True, sharey=True)
for i, ax in enumerate(axs.flat):
ax.scatter(*np.random.normal(size=(2,200)))
ax.set_title(f'Title {i}')
# set labels
plt.setp(axs[-1, :], xlabel='x axis label')
plt.setp(axs[:, 0], ylabel='y axis label')
Wen-wei Liao's answer is good if you are not trying to export vector graphics or that you have set up your matplotlib backends to ignore colorless axes; otherwise the hidden axes would show up in the exported graphic.
My answer suplabel here is similar to the fig.suptitle which uses the fig.text function. Therefore there is no axes artist being created and made colorless.
However, if you try to call it multiple times you will get text added on top of each other (as fig.suptitle does too). Wen-wei Liao's answer doesn't, because fig.add_subplot(111) will return the same Axes object if it is already created.
My function can also be called after the plots have been created.
def suplabel(axis,label,label_prop=None,
labelpad=5,
ha='center',va='center'):
''' Add super ylabel or xlabel to the figure
Similar to matplotlib.suptitle
axis - string: "x" or "y"
label - string
label_prop - keyword dictionary for Text
labelpad - padding from the axis (default: 5)
ha - horizontal alignment (default: "center")
va - vertical alignment (default: "center")
'''
fig = pylab.gcf()
xmin = []
ymin = []
for ax in fig.axes:
xmin.append(ax.get_position().xmin)
ymin.append(ax.get_position().ymin)
xmin,ymin = min(xmin),min(ymin)
dpi = fig.dpi
if axis.lower() == "y":
rotation=90.
x = xmin-float(labelpad)/dpi
y = 0.5
elif axis.lower() == 'x':
rotation = 0.
x = 0.5
y = ymin - float(labelpad)/dpi
else:
raise Exception("Unexpected axis: x or y")
if label_prop is None:
label_prop = dict()
pylab.text(x,y,label,rotation=rotation,
transform=fig.transFigure,
ha=ha,va=va,
**label_prop)
Here is a solution where you set the ylabel of one of the plots and adjust the position of it so it is centered vertically. This way you avoid problems mentioned by KYC.
import numpy as np
import matplotlib.pyplot as plt
def set_shared_ylabel(a, ylabel, labelpad = 0.01):
"""Set a y label shared by multiple axes
Parameters
----------
a: list of axes
ylabel: string
labelpad: float
Sets the padding between ticklabels and axis label"""
f = a[0].get_figure()
f.canvas.draw() #sets f.canvas.renderer needed below
# get the center position for all plots
top = a[0].get_position().y1
bottom = a[-1].get_position().y0
# get the coordinates of the left side of the tick labels
x0 = 1
for at in a:
at.set_ylabel('') # just to make sure we don't and up with multiple labels
bboxes, _ = at.yaxis.get_ticklabel_extents(f.canvas.renderer)
bboxes = bboxes.inverse_transformed(f.transFigure)
xt = bboxes.x0
if xt < x0:
x0 = xt
tick_label_left = x0
# set position of label
a[-1].set_ylabel(ylabel)
a[-1].yaxis.set_label_coords(tick_label_left - labelpad,(bottom + top)/2, transform=f.transFigure)
length = 100
x = np.linspace(0,100, length)
y1 = np.random.random(length) * 1000
y2 = np.random.random(length)
f,a = plt.subplots(2, sharex=True, gridspec_kw={'hspace':0})
a[0].plot(x, y1)
a[1].plot(x, y2)
set_shared_ylabel(a, 'shared y label (a. u.)')
# list loss and acc are your data
fig = plt.figure()
ax1 = fig.add_subplot(121)
ax2 = fig.add_subplot(122)
ax1.plot(iteration1, loss)
ax2.plot(iteration2, acc)
ax1.set_title('Training Loss')
ax2.set_title('Training Accuracy')
ax1.set_xlabel('Iteration')
ax1.set_ylabel('Loss')
ax2.set_xlabel('Iteration')
ax2.set_ylabel('Accuracy')
The methods in the other answers will not work properly when the yticks are large. The ylabel will either overlap with ticks, be clipped on the left or completely invisible/outside of the figure.
I've modified Hagne's answer so it works with more than 1 column of subplots, for both xlabel and ylabel, and it shifts the plot to keep the ylabel visible in the figure.
def set_shared_ylabel(a, xlabel, ylabel, labelpad = 0.01, figleftpad=0.05):
"""Set a y label shared by multiple axes
Parameters
----------
a: list of axes
ylabel: string
labelpad: float
Sets the padding between ticklabels and axis label"""
f = a[0,0].get_figure()
f.canvas.draw() #sets f.canvas.renderer needed below
# get the center position for all plots
top = a[0,0].get_position().y1
bottom = a[-1,-1].get_position().y0
# get the coordinates of the left side of the tick labels
x0 = 1
x1 = 1
for at_row in a:
at = at_row[0]
at.set_ylabel('') # just to make sure we don't and up with multiple labels
bboxes, _ = at.yaxis.get_ticklabel_extents(f.canvas.renderer)
bboxes = bboxes.inverse_transformed(f.transFigure)
xt = bboxes.x0
if xt < x0:
x0 = xt
x1 = bboxes.x1
tick_label_left = x0
# shrink plot on left to prevent ylabel clipping
# (x1 - tick_label_left) is the x coordinate of right end of tick label,
# basically how much padding is needed to fit tick labels in the figure
# figleftpad is additional padding to fit the ylabel
plt.subplots_adjust(left=(x1 - tick_label_left) + figleftpad)
# set position of label,
# note that (figleftpad-labelpad) refers to the middle of the ylabel
a[-1,-1].set_ylabel(ylabel)
a[-1,-1].yaxis.set_label_coords(figleftpad-labelpad,(bottom + top)/2, transform=f.transFigure)
# set xlabel
y0 = 1
for at in axes[-1]:
at.set_xlabel('') # just to make sure we don't and up with multiple labels
bboxes, _ = at.xaxis.get_ticklabel_extents(fig.canvas.renderer)
bboxes = bboxes.inverse_transformed(fig.transFigure)
yt = bboxes.y0
if yt < y0:
y0 = yt
tick_label_bottom = y0
axes[-1, -1].set_xlabel(xlabel)
axes[-1, -1].xaxis.set_label_coords((left + right) / 2, tick_label_bottom - labelpad, transform=fig.transFigure)
It works for the following example, while Hagne's answer won't draw ylabel (since it's outside of the canvas) and KYC's ylabel overlaps with the tick labels:
import matplotlib.pyplot as plt
import itertools
fig, axes = plt.subplots(3, 4, sharey='row', sharex=True, squeeze=False)
fig.subplots_adjust(hspace=.5)
for i, a in enumerate(itertools.chain(*axes)):
a.plot([0,4**i], [0,4**i])
a.set_title(i)
set_shared_ylabel(axes, 'common X', 'common Y')
plt.show()
Alternatively, if you are fine with colorless axis, I've modified Julian Chen's solution so ylabel won't overlap with tick labels.
Basically, we just have to set ylims of the colorless so it matches the largest ylims of the subplots so the colorless tick labels sets the correct location for the ylabel.
Again, we have to shrink the plot to prevent clipping. Here I've hard coded the amount to shrink, but you can play around to find a number that works for you or calculate it like in the method above.
import matplotlib.pyplot as plt
import itertools
fig, axes = plt.subplots(3, 4, sharey='row', sharex=True, squeeze=False)
fig.subplots_adjust(hspace=.5)
miny = maxy = 0
for i, a in enumerate(itertools.chain(*axes)):
a.plot([0,4**i], [0,4**i])
a.set_title(i)
miny = min(miny, a.get_ylim()[0])
maxy = max(maxy, a.get_ylim()[1])
# add a big axes, hide frame
# set ylim to match the largest range of any subplot
ax_invis = fig.add_subplot(111, frameon=False)
ax_invis.set_ylim([miny, maxy])
# hide tick and tick label of the big axis
plt.tick_params(labelcolor='none', top=False, bottom=False, left=False, right=False)
plt.xlabel("common X")
plt.ylabel("common Y")
# shrink plot to prevent clipping
plt.subplots_adjust(left=0.15)
plt.show()
You could use "set" in axes as follows:
axes[0].set(xlabel="KartalOl", ylabel="Labeled")
The figure above is a great artwork showing the wind speed, wind direction and temperature simultaneously. detailedly:
The X axes represent the date
The Y axes shows the wind direction(Southern, western, etc)
The variant widths of the line were stand for the wind speed through timeseries
The variant colors of the line were stand for the atmospheric temperature
This simple figure visualized 3 different attribute without redundancy.
So, I really want to reproduce similar plot in matplotlib.
My attempt now
## Reference 1 http://stackoverflow.com/questions/19390895/matplotlib-plot-with-variable-line-width
## Reference 2 http://stackoverflow.com/questions/17240694/python-how-to-plot-one-line-in-different-colors
def plot_colourline(x,y,c):
c = plt.cm.jet((c-np.min(c))/(np.max(c)-np.min(c)))
lwidths=1+x[:-1]
ax = plt.gca()
for i in np.arange(len(x)-1):
ax.plot([x[i],x[i+1]], [y[i],y[i+1]], c=c[i],linewidth = lwidths[i])# = lwidths[i])
return
x=np.linspace(0,4*math.pi,100)
y=np.cos(x)
lwidths=1+x[:-1]
fig = plt.figure(1, figsize=(5,5))
ax = fig.add_subplot(111)
plot_colourline(x,y,prop)
ax.set_xlim(0,4*math.pi)
ax.set_ylim(-1.1,1.1)
Does someone has a more interested way to achieve this? Any advice would be appreciate!
Using as inspiration another question.
One option would be to use fill_between. But perhaps not in the way it was intended. Instead of using it to create your line, use it to mask everything that is not the line. Under it you can have a pcolormesh or contourf (for example) to map color any way you want.
Look, for instance, at this example:
import matplotlib.pyplot as plt
import numpy as np
from scipy.interpolate import interp1d
def windline(x,y,deviation,color):
y1 = y-deviation/2
y2 = y+deviation/2
tol = (y2.max()-y1.min())*0.05
X, Y = np.meshgrid(np.linspace(x.min(), x.max(), 100), np.linspace(y1.min()-tol, y2.max()+tol, 100))
Z = X.copy()
for i in range(Z.shape[0]):
Z[i,:] = c
#plt.pcolormesh(X, Y, Z)
plt.contourf(X, Y, Z, cmap='seismic')
plt.fill_between(x, y2, y2=np.ones(x.shape)*(y2.max()+tol), color='w')
plt.fill_between(x, np.ones(x.shape) * (y1.min() - tol), y2=y1, color='w')
plt.xlim(x.min(), x.max())
plt.ylim(y1.min()-tol, y2.max()+tol)
plt.show()
x = np.arange(100)
yo = np.random.randint(20, 60, 21)
y = interp1d(np.arange(0, 101, 5), yo, kind='cubic')(x)
dv = np.random.randint(2, 10, 21)
d = interp1d(np.arange(0, 101, 5), dv, kind='cubic')(x)
co = np.random.randint(20, 60, 21)
c = interp1d(np.arange(0, 101, 5), co, kind='cubic')(x)
windline(x, y, d, c)
, which results in this:
The function windline accepts as arguments numpy arrays with x, y , a deviation (like a thickness value per x value), and color array for color mapping. I think it can be greatly improved by messing around with other details but the principle, although not perfect, should be solid.
import numpy as np
import matplotlib.pyplot as plt
from matplotlib.collections import LineCollection
x = np.linspace(0,4*np.pi,10000) # x data
y = np.cos(x) # y data
r = np.piecewise(x, [x < 2*np.pi, x >= 2*np.pi], [lambda x: 1-x/(2*np.pi), 0]) # red
g = np.piecewise(x, [x < 2*np.pi, x >= 2*np.pi], [lambda x: x/(2*np.pi), lambda x: -x/(2*np.pi)+2]) # green
b = np.piecewise(x, [x < 2*np.pi, x >= 2*np.pi], [0, lambda x: x/(2*np.pi)-1]) # blue
a = np.ones(10000) # alpha
w = x # width
fig, ax = plt.subplots(2)
ax[0].plot(x, r, color='r')
ax[0].plot(x, g, color='g')
ax[0].plot(x, b, color='b')
# mysterious parts
points = np.array([x, y]).T.reshape(-1, 1, 2)
segments = np.concatenate([points[:-1], points[1:]], axis=1)
# mysterious parts
rgba = list(zip(r,g,b,a))
lc = LineCollection(segments, linewidths=w, colors=rgba)
ax[1].add_collection(lc)
ax[1].set_xlim(0,4*np.pi)
ax[1].set_ylim(-1.1,1.1)
fig.show()
I notice this is what I suffered.
I am trying to create a 3D plot but I am having trouble with the z-axis label. It simply doesn't appear in the graph. How do I amend this? The code is as follows
# Gamma vs Current step 2
import matplotlib as mpl
from mpl_toolkits.mplot3d import Axes3D
import numpy as np
import matplotlib.pyplot as plt
h = np.arange(0.1,5.1,0.1)
gamma = np.arange(0.1,5.1,0.1)
sigmaz_hgam = np.array([.009998,.03988,.08878,.15403
,.230769,.312854,.394358,.4708311,.539697879,.6,.6518698
,.696033486,.73345752165,.7651390123,.792,.814845635
,.8343567,.851098499,.865535727,.8780487,.8889486,.89848986
,.906881,.914295,.9208731,.9267338,.93197569,.93668129
,.9409202379,.94475138,.951383,.9542629,.956895,.959309
,.961526,.9635675,.96545144,.9671934,.968807,.97030539
,.9716983,.972995,.974206,.975337,.97639567,.977387,.978318
,.97919266,.98,.9807902])
mu = 1
sigmaz_hgam = mu*sigmaz_hgam
# creates an empty list for current values to be stored in
J1 = []
for i in range(sigmaz_hgam.size):
expec_sz = sigmaz_hgam[i]
J = 4*gamma[i]*(mu-expec_sz)
J1.append(J.real)
#print(J)
This part of the code is what is used to graph out which is where the problem lies
mpl.rcParams['legend.fontsize'] = 10
fig = plt.figure()
ax = fig.gca(projection='3d')
x = h
y = gamma
z = J1
ax.plot(x, y, z, label='Dephasing Model')
ax.legend()
ax.set_xlabel('h', fontsize=10)
ax.set_ylabel('$\gamma$')
ax.yaxis._axinfo['label']['space_factor'] = 3.0
for t in ax.zaxis.get_major_ticks(): t.label.set_fontsize(10)
# disable auto rotation
ax.zaxis.set_rotate_label(False)
ax.set_zlabel('J', fontsize=10, rotation = 0)
plt.show()
On my version of Matplotlib (2.0.2), on a Mac, I see the label (which is there – most of it is just being cropped out of the image in your case).
You could try to reduce the padding between the ticks and the label:
ax.zaxis.labelpad = 0
I'm trying to print the error ratio of the Hilbert matrix.
I'm trying to make the x axis 3 → 9 and the y axis rather for a large range:
8.71244799e+01 6.44297999e+02 4.50711567e+03 3.04673758e+04
2.01144882e+05 1.30525476e+06 8.35964228e+06
I'm struggling adjust the window, or plotting correctly for that.
Any help would be great!
Here is my attempt at plotting (something)
import matplotlib.pyplot as plt
plot = 6
plt.xlabel ('n')
plt.ylabel ('Error Ration')
fig = plt.figure()
ax = fig.add_subplot(111)
for a in range (0, plot, 1):
y = xratio[a]
x = plot + 3
ax.plot(x,y, mfc='orange', mec='orange', marker='.')
plt.show()
I think you just need to use:
ax.set_xlim([x_min, x_max])
ax.set_ylim([y_min, y_max])