I am trying to scrape some data from a dictionary with a condition and print the result data to my excel document.
The Website: https://tureng.com/tr/turkce-ingilizce
Excel Document Sample
The code needs to take the data from column (A) and print it to the searchbar on the website. Then it needs to click enter and take the translated data whose type matches the column (E) which is in my document. For example: adjective means "s." on the website. So the code should take the first word that has "s." for the example word "all right"
As a result of my tryings, I came to this stage, but I do not know how to pull data of class type depending on the condition. Can you guys please help me?
Const URLstr As String = "https://tureng.com/tr/turkce-ingilizce/seal"
Private Sub CommandButton1_Click()
Dim objIE As SHDocVw.InternetExplorer
Dim ieDoc As MSHTML.HTMLDocument
Dim searchfield As MSHTML.HTMLInputElement
Dim searchbutton As MSHTML.HTMLInputElement
Dim result As MSHTML.HTMLInputElement
Dim i As Integer
Set objIE = New SHDocVw.InternetExplorer
objIE.Navigate URLstr
Do Until objIE.readyState = READYSTATE_COMPLETE: Loop
Set ieDoc = objIE.document
objIE.Visible = True
For i = 2 To 94
Set searchfield = ieDoc.all.Item("searchTerm")
Application.Wait Now() + #12:00:01 AM#
searchfield.Value = Cells(i, 1)
searchfield.Select
Application.SendKeys "~"
Application.Wait Now() + #12:00:01 AM#
Set result = ieDoc.all.Item("tr ts")(0)
Cells(i, 2) = result.innerText
Next i
objIE.Quit
End Sub
html code of the website
Related
I have written a VBA to scrape the status of a shipment from a cargo tracking site with the help of you guys here. I am trying to convert it to a function. The code works as a sub but does not work as a function. It returns a #Value error. Can someone please tell me what I am doing wrong.
Here is the code as a sub
Sub FlightStat_AFL()
Dim url As String
Dim ie As Object
Dim MAWBStatus As String
Dim MAWBNo As String
MAWBNo = Sheets("Sheet3").Range("H3").Value
'You can handle the parameters id and pfx in a loop to scrape dynamic numbers
url = "https://www.afklcargo.com/mycargo/shipment/detail/057-" & MAWBNo
'Initialize Internet Explorer, set visibility,
'call URL and wait until page is fully loaded
Set ie = CreateObject("InternetExplorer.Application")
ie.Visible = False
ie.navigate url
Do Until ie.readyState = 4: DoEvents: Loop
'Wait to load dynamic content after IE reports it's ready
'We do that with a fix manual break of a few seconds
'because the whole page will be "reload"
'The last three values are hours, minutes, seconds
Application.Wait (Now + TimeSerial(0, 0, 3))
'Get the status from the table
MAWBStatus = ie.document.getElementsByClassName("fs-12 body-font-bold")(1).innertext
Debug.Print MAWBStatus
'Clean up
ie.Quit
Set ie = Nothing
End Sub
Here is the code I am trying to make it work as a function.
Function FlightStat_AF(MAWBNo As Range) As String
Dim url As String
Dim ie As Object
Dim MAWBStatus As String
url = "https://www.afklcargo.com/mycargo/shipment/detail/057-" & MAWBNo
'Initialize Internet Explorer, set visibility,
'call URL and wait until page is fully loaded
Set ie = CreateObject("InternetExplorer.Application")
ie.Visible = False
ie.navigate url
Do Until ie.readyState = 4: DoEvents: Loop
'Wait to load dynamic content after IE reports it's ready
'We do that with a fix manual break of a few seconds
'because the whole page will be "reload"
'The last three values are hours, minutes, seconds
Application.Wait (Now + TimeSerial(0, 0, 3))
'Get the status from the table
MAWBStatus = ie.document.getElementsByClassName("fs-12 body-font-bold")(1).innertext
FlightStat_AF = MAWBStatus
'Clean up
ie.Quit
Set ie = Nothing
End Function
Try the next code, please:
Function FlightStat_AF(cargoNo As Variant) As String
Dim url As String, ie As Object, result As String
url = "https://www.afklcargo.com/mycargo/shipment/detail/" & cargoNo
Set ie = CreateObject("InternetExplorer.Application")
With ie
.Visible = False
.navigate url
Do Until .readyState = 4: DoEvents: Loop
End With
'wait a little for dynamic content to be loaded
Application.Wait (Now + TimeSerial(0, 0, 1))
'Get the status from the table
Do While result = ""
DoEvents
On Error Resume Next
result = Trim(ie.document.getElementsByClassName("fs-12 body-font-bold")(1).innerText)
On Error GoTo 0
Application.Wait (Now + TimeSerial(0, 0, 1))
Loop
ie.Quit: Set ie = Nothing
'Return value of the function
FlightStat_AF = result
End Function
IE Function
You can try this if you really want a range. Usually it should be a string which you can easily change.
You can test the function (2nd procedure) with the first procedure. Just adjust the values in the constants section.
The Code
Option Explicit
Sub getFlightStat()
' Constants
Const wsName As String = "Sheet3"
Const FirstRow As Long = 3
Const CritCol As Variant = "H"
Const ResCol As Variant = "I"
Dim wb As Workbook: Set wb = ThisWorkbook
' Define worksheet.
Dim ws As Worksheet
Set ws = wb.Worksheets(wsName)
' Calculate the row of the last non-blank cell in column 'CritCol'.
Dim LastRow As Long
LastRow = ws.Cells(ws.Rows.Count, CritCol).End(xlUp).Row
' Loop through rows and for each value in cell of column 'CritCol',
' write the value retrieved via 'FlightStat_AF' to the cell
' in the same row, but in column 'ResCol'.
Dim i As Long
For i = FirstRow To LastRow
ws.Cells(i, ResCol).Value = FlightStat_AF(ws.Cells(i, CritCol))
Next i
' Inform user.
MsgBox "Data transferred", vbInformation, "Success"
End Sub
Function FlightStat_AF(MAWBNo As Range) As String
Dim url As String
Dim ie As Object
Dim MAWBStatus As String
'You can handle the parameters id and pfx in a loop to scrape dynamic numbers
url = "https://www.afklcargo.com/mycargo/shipment/detail/057-" & MAWBNo.Value
'Initialize Internet Explorer, set visibility,
'call URL and wait until page is fully loaded
Set ie = CreateObject("InternetExplorer.Application")
ie.Visible = False
ie.navigate url
Do Until ie.readyState = 4: DoEvents: Loop
'Wait to load dynamic content after IE reports it's ready
'We do that with a fix manual break of a few seconds
'because the whole page will be "reload"
'The last three values are hours, minutes, seconds
Application.Wait (Now + TimeSerial(0, 0, 3))
'Get the status from the table
MAWBStatus = ie.document.getElementsByClassName("fs-12 body-font-bold")(1).innertext
FlightStat_AF = MAWBStatus
'Clean up
ie.Quit
Set ie = Nothing
End Function
I am trying to write code to upload data into web form at work. If I copy and paste the details the form accepts the values, but If the VBA code enters the same exact values then I get input error.
Screen script of form is below
This Excel Vba code taken from StackOverflow searches and youtube "https://www.youtube.com/watch?v=T6HRjiAdW38&list=PLBGMKJfLuhqa3q0RWyiN40NV24rxTJ0Yt&index=1"
Sub Ihub_upload()
Dim appIE As InternetExplorerMedium
Dim objElement As Object
Dim objCollection As Object
Dim sURL As String
Set appIE = New InternetExplorerMedium
sURL = "company web site "
With appIE
.navigate sURL
.Visible = True
End With
Do While appIE.Busy
Application.Wait DateAdd("s", 2, Now)
Loop
':::: Enter data collection ::::'
' I will put code below into a loop to enter multiple values if it works'
'Data collecton'
appIE.document.getElementById("CPH_MasterBody_CPH_EtlMasterBody_DDL_DataCollection").Value = 120
'File location tab 16'
appIE.document.getElementById("CPH_MasterBody_CPH_EtlMasterBody_TXT_SourceConnectionString").Value = "Y:\Databases\2019-Kv9xQ.xls"
'start date tab 18 '
appIE.document.getElementById("CPH_MasterBody_CPH_EtlMasterBody_TXT_PeriodStartDateTime").Value = "01/09/2019"
'End date tab 19'
appIE.document.getElementById("CPH_MasterBody_CPH_EtlMasterBody_TXT_PeriodEndDateTime").Value = "30/09/2019"
'publication date tab 20 '
If ThisWorkbook.Sheets("Data").Range("I3").Value <> "" Then
appIE.document.getElementById("CPH_MasterBody_CPH_EtlMasterBody_TXT_PublicationDateTime").Value = "14/11/2019"
End If
'Source URL tab 21 '
If ThisWorkbook.Sheets("Data").Range("I3").Value <> "" Then
appIE.document.getElementById("CPH_MasterBody_CPH_EtlMasterBody_TXT_SourceUrl").Value = "https://www.england.nhs.uk"
End If
':::: Save record? click ok button ::::'
Application.Wait DateAdd("s", 3, Now)
appIE.document.getElementById("CPH_MasterBody_CPH_EtlMasterBody_BTN_Save").Click
I have written vba code for entering manufacturer part number in search box of below website and clicking on search icon. It is able enter manufacturer part number in search box and click on search icon, but when "search icon is clicked the text entered in the text box is not picked up". It searches empty data.
'HTML Part for search icon
<em class="fa fa-search" aria-hidden="true" style="color: gray;"></em>
It being almost a month I have tried various different way which was also mentioned on stack overflow, like using "createEvent("keyboardevent")" but nothing worked.
' VBA code
Sub AptivScrapping()
Dim IE As SHDocVw.InternetExplorer
Set IE = New InternetExplorer
IE.Visible = True
IE.navigate "https://ecat.aptiv.com"
Do While IE.readyState < READYSTATE_COMPLETE
Loop
Dim idoc As MSHTML.HTMLDocument
Set idoc = IE.document
idoc.getElementById("searchUserInput").Value = "33188785"
Dim doc_ele As MSHTML.IHTMLElement
Dim doc_eles As MSHTML.IHTMLElementCollection
Set doc_eles = idoc.getElementsByTagName("a")
For Each doc_ele In doc_eles
If doc_ele.getAttribute("ng-click") = "SearchButtonClick(1)" Then
doc_ele.Click
Exit Sub
Else
End If
Next doc_ele
End Sub
The page does an xhr request to retrieve the search results. You can find it in the network tab after clicking submit. This means you can avoid, in this case, the expense of a browser and issue an xhr request. The response is json so you do need a json parser to handle the results.
I would use jsonconverter.bas to parse the json. After installing the code from that link in a standard module called JsonConverter, go to VBE > Tools > References > Add a reference to Microsoft Scripting Runtime
I dimension an array to hold the results. I determine rows from the number of items in the json collection returned and the number of columns from the size of the first item dictionary. I loop the json object, and inner loop the dictionary keys of each dictionary in collection, and populate the array. I write the array out in one go at end which is less i/o expensive.
Option Explicit
Public Sub GetInfo()
Dim json As Object, ws As Worksheet, headers()
Dim item As Object, key As Variant, results(), r As Long, c As Long
Set ws = ThisWorkbook.Worksheets("Sheet1")
With CreateObject("MSXML2.XMLHTTP")
.Open "GET", "https://ecat.aptiv.com/json/eCatalogSearch/SearchProducts?filter=All&options=&pageSize=10&search=33188785", False
.send
Set json = JsonConverter.ParseJson(.responseText)("Products")
End With
headers = json.item(1).keys
ReDim results(1 To json.Count, 1 To UBound(headers) + 1)
For Each item In json
r = r + 1: c = 1
For Each key In item.keys
results(r, c) = item(key)
c = c + 1
Next
Next
With ws
.Cells(1, 1).Resize(1, UBound(headers) + 1) = headers
.Cells(2, 1).Resize(UBound(results, 1), UBound(results, 2)) = results
End With
You can do this instead:
txt = "33188785"
IE.navigate "https://ecat.aptiv.com/feature?search=" & txt
This will take you straight to the Search Result.
Code:
Sub AptivScrapping()
Dim IE As SHDocVw.InternetExplorer
Dim txt As String
Set IE = New InternetExplorer
txt = "33188785"
IE.Visible = True
IE.navigate "https://ecat.aptiv.com/feature?search=" & txt
Do While IE.Busy
Application.Wait DateAdd("s", 1, Now)
Loop
End Sub
This will be faster as You will only have to load one page.
Why that's happening, i am not sure, but seems like the TextBox that is used to input text is not being Activated when adding text automatically to it. It is being activated when we click inside it.
I got the solution for above problem from Mrxel.com below is the link for that post.
https://www.mrexcel.com/forum/excel-questions/1105434-vba-ie-automation-issue-angularjs-input-text-post5317832.html#post5317832
In this case I need to enter the search string character by character and sendKeys and input events inside the loop. Below is the working vba code.
Sub AptivScrapping()
Dim IE As SHDocVw.InternetExplorer
Set IE = New InternetExplorer
IE.Visible = True
IE.navigate "https://ecat.aptiv.com"
Do While IE.readyState < READYSTATE_COMPLETE
Loop
Dim idoc As MSHTML.HTMLDocument
Set idoc = IE.document
IE.document.getElementById("searchUserInput").Focus = True
IE.document.getElementById("searchUserInput").Select
sFieldInput = "33188785"
For s = 1 To Len(sFieldInput)
Application.SendKeys Mid(sFieldInput, s, 1)
While IE.readyState < 4 Or IE.Busy
Application.Wait DateAdd("s", LoopSeconds, Now)
Wend
Next s
IE.document.getElementById("searchUserInput").Focus = False
Dim doc_ele As MSHTML.IHTMLElement
Dim doc_eles As MSHTML.IHTMLElementCollection
Set doc_eles = idoc.getElementsByTagName("a")
For Each doc_ele In doc_eles
If doc_ele.getAttribute("ng-click") = "SearchButtonClick(1)" Then
doc_ele.Click
Exit Sub
Else
End If
Next doc_ele
End Sub
I am very limited on VBA,
The Code is in a Module, the code has a sub process as well, so sorry if I post the code wrong
A) open IE
B) Subprocess gets the data.
The code works fine on ebay.com but NOT for ebay.co.uk - can't work out why, also it converts urls to hyperlinks
It only does the first page, I need it to go through an X amount of pages - have a code but can't get it to work so have removed it.
Can the search query be run AFTER Ebay opens, so it opens, then search item is input to ebay and then code runs, or to run from a cell, IF its Cell A1 the data extracted needs to be pasted in A2 and below.
I have looked at elements for ebay.com and ebay.co.uk and they look the same to me, so can't work out why its not working as it works for 1 and not the other.
I did input the code for getting data from several pages it did not work. I know this code works as I have it for when I fetch urls from google
Public IE As New SHDocVw.InternetExplorer
Sub GetData()
Dim HTMLdoc As MSHTml.HTMLDocument
Dim othwb As Variant
Dim objShellWindows As New SHDocVw.ShellWindows
Set IE = CreateObject("internetexplorer.application")
With IE
.Visible = True
'.Navigate "https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=jackets&_sacat=0"
.Navigate "https://www.ebay.com/sch/i.html_from=R40&_nkw=ralph+lauren&_sacat=1059&LH_TitleDesc=0&_dmd=1&rt=nc"
While .Busy Or .readyState <> 4: DoEvents: Wend
Set HTMLdoc = IE.document
ProcessHTMLPage HTMLdoc
.Quit
End With
End Sub
code here
enter
'''''' THIS IS THE SUB PROCESS '''''
Sub ProcessHTMLPage(HTMLPage As MSHTml.HTMLDocument)
Dim HTMLItem As MSHTml.IHTMLElement
Dim HTMLItems As MSHTml.IHTMLElementCollection
Dim HTMLInput As MSHTml.IHTMLElement
Dim rownum As Long
rownum = 1
Set HTMLItems = HTMLPage.getElementsByClassName("s-item__title")
For Each HTMLItem In HTMLItems
Cells(rownum, 1).Value = HTMLItem.innerText
rownum = rownum + 1
Next HTMLItem
rownum = 1
Set HTMLItems = HTMLPage.getElementsByClassName("s-item__price")
For Each HTMLItem In HTMLItems
Cells(rownum, 2).Value = HTMLItem.innerText
rownum = rownum + 1
Next HTMLItem
rownum = 1
Set HTMLItems = HTMLPage.getElementsByClassName("s-item__link")
For Each HTMLItem In HTMLItems
Cells(rownum, 3).Value = HTMLItem.href
rownum = rownum + 1
Next HTMLItem
'Converts each text hyperlink selected into a working hyperlink from C1 to 25000 rows
Range("C1:C25000").Select
For Each xCell In Selection
ActiveSheet.Hyperlinks.Add Anchor:=xCell, Address:=xCell.Formula
Next xCell
Range("C1").Select
End Sub
Code for going to next page
pageNumber = 1
'i = 2
If pageNumber >= 6 Then Exit Do 'the first 6 pages
internetdata.getElementById("pnnext").click 'next web page
Do While internet.Busy Or internet.readyState <> 4
DoEvents
Loop
Set internetdata = internet.document
pageNumber = pageNumber + 1
Loop
Does not work on Ebay.co.uk - NO RESULTS ARE EXTRACTED - Works fine in ebay.com
Need it to get data from X amount of pages and NOT just 1 page
Can the search query be run AFTER Ebay opens, so it opens, then search item is input to ebay and then code runs, or to run from a cell, IF its Cell A1 the data extracted needs to be pasted in A2 and below.
This is my code for google search, I have got it working so the search comes from cell A1, I am look for something like this, I am going to see if I can use the ebay code with this. As this also does the first 25 pages in google search
enter Sub webpage()
Dim ie As Object
Dim htmlDoc As Object
Dim nextPageElement As Object
Dim div As Object
Dim link As Object
Dim url As String
Dim pageNumber As Long
Dim i As Long
' Takes seach from A1 and places it into google
url = "https://www.google.co.uk/search?q=" & Replace(Worksheets("Sheet1").Range("A1").Value, " ", "+")
Set ie = CreateObject("InternetExplorer.Application")
With ie
.Visible = True
.navigate url
Do While .Busy Or .readyState <> 4
DoEvents
Loop
End With
Application.Wait Now + TimeSerial(0, 0, 5)
Set htmlDoc = ie.document
pageNumber = 1
i = 2
Do
For Each div In htmlDoc.getElementsByTagName("div")
If div.getAttribute("class") = "r" Then
Set link = div.getElementsByTagName("a")(0)
Cells(i, 2).Value = link.getAttribute("href")
i = i + 1
End If
Next div
If pageNumber >= 25 Then Exit Do 'the first 25 pages
Set nextPageElement = htmlDoc.getElementById("pnnext")
If nextPageElement Is Nothing Then Exit Do
' Clicks web next page
nextPageElement.Click 'next web page
Do While ie.Busy Or ie.readyState <> 4
DoEvents
Loop
Application.Wait Now + TimeSerial(0, 0, 5)
Set htmlDoc = ie.document
pageNumber = pageNumber + 1
Loop
MsgBox "All Done"
Set ie = Nothing
Set htmlDoc = Nothing
Set nextPageElement = Nothing
Set div = Nothing
Set link = Nothing
End Sub
code here
Question 1: Why does it work for one domain but not the other?
To answer question 1 (the other questions should be new posts) - the html is not the same at all. The classes which work for ebay.com are not found in ebay.co.uk; So, your loop over collections doesn't do anything because they are count 0 (or length 0 with nodeLists if using querySelectorAll). Instead, you need branched code. Set your selectors based on the url domain.
I have used css selectors as this is the easiest, and fastest way, to select the required elements whilst maintaining the flexibility of a code re-factor to reduce the lines of repeated code.
Side note:
If you are unsure about whether your selection method will work across different pages you can do at least two things:
Right click > inspect element > visually check the class names are the same for the elements you are attempting to compare. So, if you are looking at product names, are the class names in the html the same on both pages?
You can use the search facility of the browser > open element tab via F12 then press Ctrl+F to pull up search box > enter your class name from the first page into this box in the second page and hit enter. You can also enter css selectors here and some cases regex. You will get a hit count telling you how many matches found. You can keep pressing enter to cycle through matches and each match will be highlighted in the html above, so you can easily compare if matched results are what you expected.
click image to enlarge
img url: https://i.stack.imgur.com/MWkEx.png
VBA:
Option Explicit
Public Sub GetData()
Dim htmlDoc As MSHTML.HTMLDocument, ie As SHDocVw.InternetExplorer, ws As Worksheet
Set ie = New SHDocVw.InternetExplorer
Set htmlDoc = New MSHTML.HTMLDocument
Set ws = ThisWorkbook.Worksheets("Sheet1")
With ie
.Visible = True
'.Navigate2 "https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=jackets&_sacat=0"
.Navigate2 "https://www.ebay.com/sch/i.html_from=R40&_nkw=ralph+lauren&_sacat=1059&LH_TitleDesc=0&_dmd=1&rt=nc"
While .Busy Or .readyState <> 4: DoEvents: Wend
Dim index As Long, HTMLItems As Object, rowNum As Long, xCell As Range
Dim cssSelectors(), i As Long
Select Case True
Case InStr(.document.URL, "ebay.co.uk") > 0
cssSelectors = Array(".gvtitle a", ".amt", ".gvtitle a")
Case InStr(.document.URL, "ebay.com") > 0
cssSelectors = Array(".s-item__title", ".s-item__price", ".s-item__link")
End Select
With ws
For i = LBound(cssSelectors) To UBound(cssSelectors)
rowNum = 1
Set HTMLItems = ie.document.querySelectorAll(cssSelectors(i))
For index = 0 To HTMLItems.length - 1
.Cells(rowNum, i + 1).Value = IIf(i = 2, HTMLItems.item(index).getAttribute("href"), HTMLItems.item(index).innerText)
rowNum = rowNum + 1
Next
Next
For Each xCell In .Range("C1:C25000") '<= all these really?
.Hyperlinks.Add Anchor:=xCell, Address:=xCell.Formula
Next xCell
End With
.Quit
End With
End Sub
If this works on eBay then you need to find out yourself why it's not working on ebay.co.uk. My point is if the code itself works than there is nothing we can help you with here. You need to take some time to investigate ebay.co.uk and find the differences as I am sure it's something minor. I can't help u fix code that isn't actually broken. I wish you luck though.
What I have to do is use Excel VBA to:
login to Amazon Seller
open a workbook
loop through a column to get an order number
put it in the search box
hit the search button
go to the order page and extract the data
then have the extracted data go back into a specified column in
another Excel workbook
The loop and order number parts are what I'm currently stumped on. I've figured out this much code as of this moment:
Sub MyAmazonSeller()
Dim MyHTML_Element As IHTMLElement
Dim MyURL As String
Dim oSignInLink As HTMLLinkElement
Dim oInputEmail As HTMLInputElement
Dim oInputPassword As HTMLInputElement
Dim oInputSigninButton As HTMLInputButtonElement
'InputSearchOrder will be the destination for order numbers taken from the workbook
Dim InputSearchOrder As HTMLInputElement
Dim InputSearchButton As HTMLInputButtonElement
Dim IE As InternetExplorer
Dim AAOrder As Workbook
Dim AAws As Worksheet
MyURL = "https://sellercentral.amazon.com/gp/homepage.html"
Set IE = New InternetExplorer
' Open the browser and navigate.
With IE
.Silent = True
.Navigate MyURL
.Visible = True
Do
DoEvents
Loop Until .ReadyState = READYSTATE_COMPLETE
End With
' Get the html document.
Set HTMLDoc = IE.Document
' See if you have the sign in link is because you are in the main
' page
Set oSignInLink = HTMLDoc.getElementById("signin-button-container")
If Not oSignInLink Is Nothing Then
oSignInLink.Click
Do
DoEvents
Loop Until IE.ReadyState = READYSTATE_COMPLETE
End If
' Get the email field and the next button
Set oInputEmail = HTMLDoc.getElementById("username")
Set oInputPassword = HTMLDoc.getElementById("password")
' Click the button and wait
oInputEmail.Value = "xxxxxx#xxxxxx.net"
' Get the password field and the sign in button
Set oInputPassword = HTMLDoc.getElementById("password")
Set oInputSigninButton = HTMLDoc.getElementById("sign-in-button")
' Click the button and wait
oInputPassword.Value = "xxxxxxxx"
oInputSigninButton.Click
Do
DoEvents
Loop Until IE.ReadyState = READYSTATE_COMPLETE
Application.Wait (Now + TimeValue("0:00:05"))
Set AAOrder = Application.Workbooks.Open("Z:\Employee Folders\Employee\trackingnumber_sample_spreadsheet.xls")
Set AAws = AAws.Worksheets("PrimeOrdersWithNoFulfillmentRe")
Set InputSearchOrder = HTMLDoc.getElementById("sc-search-field")
'What I'm currently stuck on
InputSearchOrder.Value = "001-7163923-7572632"
Set InputSearchButton = HTMLDoc.getElementsByClassName("sc-search-button")(0)
InputSearchButton.Click
Do
DoEvents
Loop Until IE.ReadyState = READYSTATE_COMPLETE
'Was able to add this snippet, but I'm getting an error 13, most likely with
'my e variable. I'm basically trying to do a loop within a loop, extracting 5
'pieces of data and sticking them back into their respective columns in the
'original Excel sheet. The problem comes when scraping the HTML. I'm basically
'trying to get text in the tables which have a few levels and it's frustrating
'me to no end.
With HTMLDoc
Set elems = HTMLDoc.getElementsByTagName("td")
For Each e In elems
If e.innerText Like "*1Z*" Then
Range("D2").Value = e.innerText
End If
Next e
End With
Err_Clear:
If Err <> 0 Then
Err.Clear
Resume Next
End If
End Sub