I have a table that just contains all articles.
Then I have a transactional table that contains a value that I would like to use for the rank. THe same tables has the department information.
The structure is like:
Now I would like to get the Ranking based in Value, in the end represented in a matrix.
This function shows me the ranking based on the value:
RANKX(ALLSELECTED(Article),[Value])
If the matrix just contains Article in the rows, then it works.
But when I add department, then the Rank is calculated for each department.
How can I get the RANK for each Article regardles of the Department?
I'm assuming that you are creating a measure and that you are putting the results in a "table", rather than a "matrix". If so, then the following DAX works for me.
Rank = RANKX(ALLSELECTED(Table1), Calculate(Max(Table1[Value])))
Note that this is when all of the data comes from a single "Table1". You may need to make updates to the measure above based on your table structure and names.
Related
This relates to adding a Calculated Column to a table which fetches rows from two other tables based on some criteria.
Consider a model like this:
I want to come up with a Calculated Column called 'Budget Material Consumption' in the table 'Actual Material Utilization'. This should calculate how much the material should have been utilized in order to produce the products sold as per the standard Recipe table.
I wanted to use the following formula but its not working:
=Calculate( Sum(Recipe[RM_QTY]) * Sum(Sales[Qty]) , Filter(Recipe, Recipe[RM_ID]=Utilization[RM_ID]) , Filter(Sales,Sales[Product_ID]=Recipe[Product_ID]) )
Hope I am able to explain my query just fine.
Regards.
I am Counting on Distinct ID's in a column - this is leading to the sum of the subtotals not equalling the grand total as follows:
What I want to do is rank the Payment Dates in cronological order and select ONLY the highest date to display. In the example above the Grand Total won't change, but the Townville row will not show a Distinct Student Count.
This is a very specific requirement and I'm assuming there's an easy way to do it in DAX - I've tried playing around with both RANKX and MAX but am no closer to solving this.
One last thing - the Rank must be contextual to the Time Filter selected by the user (so if they select 2015 it'd give the second record Rank 1 and the top record wouldn't show. If they select May 2015 it'd give the top record Rank 1 and the second record wouldn't show)
I think this is what you are looking for - I added a calculated column to the PowerPivot model that provides a rank based on the Last Payment Date and the Name of the Student. It will rank the earliest payment for any student as a 1.
The code for the column is as follows:
=RANKX(FILTER(Table1, [Student Name] = EARLIER([Student Name])), [Last Payment Date])
... assuming your table is named "Table1"!
The FILTER is the key that limits the ranking to dates belonging to students with that name only.
Update for Multiple tables
To set up relationships between the tables, go to the "Diagram View" of the model, available in the Home tab of the Power Pivot window.
You can drag fields from one table to the other to create relationships. This will only work if at least one of the fields is unique - it's a good idea to think of the model as a dimensional model, with a tables that acts like a fact and other tables around it that act like dimensions.
From the comment, I would try to get the Payments to act like the fact, and have it link to the Community and Student tables. in this case, you could then have the following code:
=RANKX(FILTER(Table1, Related('Students'[Student Name]) = EARLIER('Students'[Student Name])), [Last Payment Date])
This calculated column would be on your Payments Fact table, and it uses a lookup to a related field.
Note that in this specific case, it would be easier to just run the filter over your Student ID field that is used to lookup the Student name.
I'm using Power Pivot add-in to create a data warehouse for generate dynamic tables and graphs (strictly data source is Excel), but I have a problem whit a calculate in the relations. My data model is the following:
My Snowflake data warehouse model
So for the fact table "fSales" I need to multiply the dCostDetail[Value] per dWorkCost[Value] to generate the fSales[Expenses] amount.
I tried to use the formula but I get an error: related but it don't allow to nested between the relations, e.g. fSales[Expenses] = related(dCostDetail[Value])*related(dWorkCost[Value])
Also I tried to use the next formula:
fSales[Expenses] = related(dWorkCost[Value]) * Calculate(Calculate(Calculate(Value(dCostDetail[Value]), Userelationship(fSales[IdProduct],dProduct[Sku]),Userelationships(dProduct[IdCateg],dCategory[IdCategory]), Userelationships(dCategory[IdCategory],dCostDetail[IdCateg]))))
And I need this "type" of normalized model to have the details when I analyze the information, e.g. filter, but if you know another way to generate the calculation it would be ok.
RELATED doesn't work in measures, because it evaluates on a record-by-record level. So you're on the right track, but what you need to do is create a column in Powerpivot in the fSales table called "Cost Detail" or whatever, and use a RELATED formula there to pull in that value from the CostDetail table. Create another column and do the same thing to pull in the dWorkCost value into the fSales table.
Then you can do a measure for the expenses like this:
Expenses:=SUM([whatever you called CostDetailColumn])*SUM([whatever you called WorkCostColumn])
You should be able to drop that measure into a pivot and it should do what you're looking for.
Due to performance issues I need to remove a few distinct counts on my DAX. However, I have a particular scenario and I can't figure out how to do it.
As example, let's say one or more restaurants can be hired at one or more feasts and prepare one or more menus (see data below).
I want a PowerPivot table that shows in how many feasts each restaurant was present (see table below). I achieved this by using distinctcount.
Why not precalculating this on Power Query? The real data I have is a bit more complex (more ID columns) and in order to be able to pivot the data I would have to calculate thousands of possible combinations.
I tried adding to my model a Feast dimensional table (on the example this would only be 1 column of 2 rows). I was hoping to use that relationship to be able to make a straight count, but I haven't been able to come up with the right DAX to do so.
You could use COUNTROWS() combined with VALUES().
Specifically, COUNTROWS() will give you the count of rows in a table. That means COUNTROWS is expecting a table is input. Here's the magic part: VALUES() will return a table as results, and the table it returns are the distinct values in the table/column that you provide as the argument for VALUES().
I'm not sure if I'm explaining it well, so for the sample data you provided, the measure would look like this (assuming the table is named Table1):
Unique Feasts:=COUNTROWS(VALUES('Table1'[Feast Id]))
You can then create a pivot table from Powerpivot, and drag Restaurant Id into Rows, and drag the measure above into Values. Same result as DISTINCTCOUNT, but with less performance overhead (I think).
I am using Excel Powerpivot with data in two separate tables. Table 1 has ITEM level data with a BRAND characteristic. Table 2 has BRAND level data. The two tables are linked by the BRAND key. The measure I am using is non addable. i.e. the sum of the ITEMS does not equal the BRAND. The pivot is set up with ITEMS nested under BRANDS in the rows and the Measure in the column.
Excel assumes that I want to summarize ITEM to a BRAND level by applying SUM, MAX, MIN, AVG, etc. I would like to return the actual values from the appropriate ITEM or BRAND level table and not apply any calculations to the values. Is this possible?
If what you are effectively trying to do is produce a different result for the Brand rows (e.g. blank()) then the answer is to write a further measure that does a logic check to determine whether or not the row in question is an ITEM or a BRAND.
= IF (HASONEVALUE(table1[Item]), [Measure], Blank() )
Bear in mind that this will work for your current pivot but may not be adaptable to all pivots.
This assumes that you have explicitly created a measure called [Measure] and you are not just dragging the numeric column into the values box. If not you can create the initial [Measure] something like this:
= Sum(table1[Value])
Where Value is the column you want to use in the measure. Although you have used a sum, if it relates to a single item which has a single row in the table it will give the desired result.