I'm new on bash. I want to write a script which will run iwconfig command the output should show me my wlan* mode is Managed or Monitor?
I had tried this like following but it is not working and runs the command output. I just need to echo which mode is it.
IWCONFIG_LOG="$(iwconfig)"
if [[ "$IWCONFIG_LOG" == *Mode:Managed* ]]; then
echo "Managed"
elif [[ "$IWCONFIG_LOG" == *Mode:Monitor* ]]; then
echo "Monitor Mode"
fi
Looks like you want to use Bash (not sh) in order to get this accomplish.
So, try this:
#!/bin/bash
IWCONFIG_LOG="$((iwconfig | grep Mode) 2> /dev/null)"
if [[ $IWCONFIG_LOG == *"Mode:Managed"* ]]; then
echo "Managed"
elif [[ $IWCONFIG_LOG == *"Mode:Monitor"* ]]; then
echo "Monitor Mode"
fi
Save it as a file and chmod 755 it to make it executable or execute it using "bash" instead "sh".
There are several modes, not only Managed or Monitor, so seems you only want to detect one of these two.
To see all available modes read man iwconfig
Since iwconfig writes also to standard error:
if [[ $(iwconfig 2>/dev/null | grep "Managed") ]]; then
echo "Managed"
else
echo "Monitor"
fi
or, as pointed out by #choroba in comments:
if iwconfig 2>/dev/null | grep -q Managed ; then
echo "Managed"
else
echo "Monitor"
fi
Related
Something similar to this maybe:
#! /bin/bash
echo What is your name?
read name | cat > ~/Documents/file.txt
if [[ $name==Bob ]]
echo something
fi
The command creates an empty file on manjaro mint.
Your problem is that read doesn't create any output.
And you have a syntax error further down the line, it would be a good idea to put your script(s) through shellcheck.
#! /bin/bash
echo What is your name?
read -r name
echo "$name" > ~/Documents/file.txt
if [[ "$name" == "Bob" ]]; then
echo something
fi
Please explain to me why the very last echo statement is blank? I expect that XCODE is incremented in the while loop to a value of 1:
#!/bin/bash
OUTPUT="name1 ip ip status" # normally output of another command with multi line output
if [ -z "$OUTPUT" ]
then
echo "Status WARN: No messages from SMcli"
exit $STATE_WARNING
else
echo "$OUTPUT"|while read NAME IP1 IP2 STATUS
do
if [ "$STATUS" != "Optimal" ]
then
echo "CRIT: $NAME - $STATUS"
echo $((++XCODE))
else
echo "OK: $NAME - $STATUS"
fi
done
fi
echo $XCODE
I've tried using the following statement instead of the ++XCODE method
XCODE=`expr $XCODE + 1`
and it too won't print outside of the while statement. I think I'm missing something about variable scope here, but the ol' man page isn't showing it to me.
Because you're piping into the while loop, a sub-shell is created to run the while loop.
Now this child process has its own copy of the environment and can't pass any
variables back to its parent (as in any unix process).
Therefore you'll need to restructure so that you're not piping into the loop.
Alternatively you could run in a function, for example, and echo the value you
want returned from the sub-process.
http://tldp.org/LDP/abs/html/subshells.html#SUBSHELL
The problem is that processes put together with a pipe are executed in subshells (and therefore have their own environment). Whatever happens within the while does not affect anything outside of the pipe.
Your specific example can be solved by rewriting the pipe to
while ... do ... done <<< "$OUTPUT"
or perhaps
while ... do ... done < <(echo "$OUTPUT")
This should work as well (because echo and while are in same subshell):
#!/bin/bash
cat /tmp/randomFile | (while read line
do
LINE="$LINE $line"
done && echo $LINE )
One more option:
#!/bin/bash
cat /some/file | while read line
do
var="abc"
echo $var | xsel -i -p # redirect stdin to the X primary selection
done
var=$(xsel -o -p) # redirect back to stdout
echo $var
EDIT:
Here, xsel is a requirement (install it).
Alternatively, you can use xclip:
xclip -i -selection clipboard
instead of
xsel -i -p
I got around this when I was making my own little du:
ls -l | sed '/total/d ; s/ */\t/g' | cut -f 5 |
( SUM=0; while read SIZE; do SUM=$(($SUM+$SIZE)); done; echo "$(($SUM/1024/1024/1024))GB" )
The point is that I make a subshell with ( ) containing my SUM variable and the while, but I pipe into the whole ( ) instead of into the while itself, which avoids the gotcha.
#!/bin/bash
OUTPUT="name1 ip ip status"
+export XCODE=0;
if [ -z "$OUTPUT" ]
----
echo "CRIT: $NAME - $STATUS"
- echo $((++XCODE))
+ export XCODE=$(( $XCODE + 1 ))
else
echo $XCODE
see if those changes help
Another option is to output the results into a file from the subshell and then read it in the parent shell. something like
#!/bin/bash
EXPORTFILE=/tmp/exportfile${RANDOM}
cat /tmp/randomFile | while read line
do
LINE="$LINE $line"
echo $LINE > $EXPORTFILE
done
LINE=$(cat $EXPORTFILE)
I have a filewatch program:
#!/bin/sh
# On Linux, uses inotifywait -mre close_write, and on OS X uses fswatch.
set -e
[[ "$#" -ne 1 ]] && echo "args count" && exit 2
if [[ `uname` = "Linux" ]]; then
inotifywait -mcre close_write "$1" | sed 's/,".*",//'
elif [[ `uname` = "Darwin" ]]; then
# sed on OSX/BSD wants -l for line-buffering
fswatch "$1" | sed -l 's/^[a-f0-9]\{1,\} //'
fi
echo "fswatch: $$ exiting"
And a construct i'm trying to use from a script (and I am testing with it on the command line on CentOS now):
filewatch . | while read line; do echo "file $line has changed\!\!"; done &
So what I am hoping this does is it will let me process, one line at a time, the output of inotify, which of course sends out one line for each file it has detected a change on.
Now for my script to clean stuff up properly I need to be able to kill this whole backgrounded pipeline when the script exits.
So i run it and then if I run kill on either the first part of the pipe or the second part, the other part does not terminate.
So I think if I kill the while read line part (which should be sh (zsh in the case of running on the cmd line)) then filewatch should be receiving a SIGPIPE. Okay so I am not handling that, I guess it can keep running.
If I kill filewatch, though, it looks like zsh continues with its while read line. Why?
On my terminal in Ubuntu, I often run programs which keep running for a long time. And since there are a lot of these programs, I keep forgetting which terminal is for which program, unless I tab through all of those. So I wanted to find a way to update my terminal title to the program name, whenever I run a command. I don't want to do it manually.
I use gnome-terminal, but answer shouldn't really depend on that. Basically, If I'm able to run a second command, then I can simply use gconftool command to update the title. So I was hoping to find a way to capture the command in bash and update the title after every command. How do I do that?
I have some answers for you :) You're right that it shouldn't matter that you're using gnome-terminal, but it does matter what command shell you're using. This is a lot easier in zsh, but in what follows I'm going to assume you're using bash, and that it's a fairly recent version (> 3.1).
First of all:
Which environment variable would
contain the current 'command'?
There is an environment variable which has more-or-less what you want - $BASH_COMMAND. There's only one small hitch, which is that it will only show you the last command in a pipe. I'm not 100% sure what it will do with combinations of subshells, either :)
So I was hoping to find a way to
capture the command in bash and update
the title after every command.
I've been thinking about this, and now that I understand what you want to do, I realized the real problem is that you need to update the title before every command. This means that the $PROMPT_COMMAND and $PS1 environment variables are out as possible solutions, since they're only executed after the command returns.
In bash, the only way I can think of to achieve what you want is to (ab)use the DEBUG SIGNAL. So here's a solution -- stick this at the end of your .bashrc:
trap 'printf "\033]0;%s\007" "${BASH_COMMAND//[^[:print:]]/}"' DEBUG
To get around the problem with pipes, I've been messing around with this:
function settitle () {
export PREV_COMMAND=${PREV_COMMAND}${#}
printf "\033]0;%s\007" "${BASH_COMMAND//[^[:print:]]/}"
export PREV_COMMAND=${PREV_COMMAND}' | '
}
export PROMPT_COMMAND=${PROMPT_COMMAND}';export PREV_COMMAND=""'
trap 'settitle "$BASH_COMMAND"' DEBUG
but I don't promise it's perfect!
Try this:
trap 'echo -ne "\033]2;$(history 1 | sed "s/^[ ]*[0-9]*[ ]*//g")\007"' DEBUG
Thanks to the history 1 it works even with complicated expressions like:
true && (false); echo $? | cat
For which approaches relying on $BASH_COMMAND or $# fail. For example simon's displays:
true | echo $? | cat
Thanks to Gilles and simon for providing inspiration.
I see what stoutie is trying to do, except it's a lot more work than needed. And doesn't cause all sorts of other potentially bad things that can occur as a result of redefining 'cd' and putting in all of that testing just to change directories. Bash has built in support for most of this.
You can put this in your .bashrc anywhere after you set your current PS1 prompt (this way it just prepends it)
# If this is an xterm set the titlebar to user#host:dir
case "$TERM" in
xterm*|rxvt*)
PS1="\[\e]0;\u#\h: \w\a\]$PS1"
;;
*)
;;
esac
The OP asked for bash, but others might be interested to learn that (as mentioned above) this is indeed a lot easier using the zsh shell. Example:
# Set window title to command just before running it.
preexec() { printf "\x1b]0;%s\x07" "$1"; }
# Set window title to current working directory after returning from a command.
precmd() { printf "\x1b]0;%s\x07" "$PWD" }
In preexec, $1 contains the command as typed (requires shell history to be enabled, which seems to be a fair assumption), $2 the expanded command (shell aliases etc.) and $3 the "very expanded" command (shell function bodies). (more)
I'm doing something like this, to show my pwd in the title, which could be modified to do whatever you want to do with the title:
function title { echo -en "\033]2;$1\007"; }
function cd { dir=$1; if [ -z "$dir" ]; then dir=~; fi; builtin cd "$dir" && title `pwd`; }
I just threw this in my ~/.bash_aliases.
Update
I ran into strange bugs with my original answer. I ended up picking apart the default Ubuntu PS1 and breaking it into parts only to realize one of the parts was the title:
# simple prompt
COLOR_YELLOW_BOLD="\[\033[1;33m\]"
COLOR_DEFAULT="\[\033[0m\]"
TITLE="\[\e]0;\u#\h:\w\a\]"
PROMPT="\w\n$ "
HUH="${debian_chroot:+($debian_chroot)}"
PS1="${COLOR_YELLOW_BOLD}${TITLE}${HUH}${PROMPT}${COLOR_DEFAULT}"
Without breaking into variables, it would look like this:
PS1="\[\033[1;33m\]\[\e]0;\u#\h:\w\a\]${debian_chroot:+($debian_chroot)}\w\n$ \[\033[0m\]"
I have tested three method, all is OK, use any one for your pleasure.
export PROMPT_COMMAND='echo -ne "\033]2;$(history 1 | sed "s/^[ ]*[0-9]*[ ]*//g")\007"'
trap 'echo -ne "\033]2;$(history 1 | sed "s/^[ ]*[0-9]*[ ]*//g")\007"' DEBUG
trap 'echo -ne "\e]0;"; echo -n $BASH_COMMAND; echo -ne "\a"' DEBUG
please note if use $BASH_COMMAND, it don't recognize bash alias, and use PROMPT_COMMAND show finished command, but use trap show running command.
Based on the the need to auto position putty windows I have modified my /etc/bash.bashrc file on a Debian/Ubuntu system. I have posted the full contents for completeness but the relevant bit to starts on the # Display command ... comment line.
# System-wide .bashrc file for interactive bash(1) shells.
# To enable the settings / commands in this file for login shells as well,
# this file has to be sourced in /etc/profile.
# If not running interactively, don't do anything
[ -z "$PS1" ] && return
# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize
# set variable identifying the chroot you work in (used in the prompt below)
if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
debian_chroot=$(cat /etc/debian_chroot)
fi
# set a fancy prompt (non-color, overwrite the one in /etc/profile)
PS1='${debian_chroot:+($debian_chroot)}\u#\h:\w\$ '
# Display command run in title which allows us to distinguish Kitty/Putty
# windows and re-position easily using AutoSizer window utility. Based on a
# post here: http://mg.pov.lt/blog/bash-prompt.html
case "$TERM" in
xterm*|rxvt*)
# Show the currently running command in the terminal title:
# http://www.davidpashley.com/articles/xterm-titles-with-bash.html
show_command_in_title_bar()
{
case "$BASH_COMMAND" in
*\033]0*)
# The command is trying to set the title bar as well;
# this is most likely the execution of $PROMPT_COMMAND.
# In any case nested escapes confuse the terminal, so don't
# output them.
;;
*)
echo -ne "\033]0;${USER}#${HOSTNAME}: ${BASH_COMMAND}\007"
;;
esac
}
trap show_command_in_title_bar DEBUG
;;
*)
;;
esac
# Commented out, don't overwrite xterm -T "title" -n "icontitle" by default.
# If this is an xterm set the title to user#host:dir
#case "$TERM" in
#xterm*|rxvt*)
# PROMPT_COMMAND='echo -ne "\033]0;${USER}#${HOSTNAME}: ${PWD}\007"'
# ;;
#*)
# ;;
#esac
# enable bash completion in interactive shells
if ! shopt -oq posix; then
if [ -f /usr/share/bash-completion/bash_completion ]; then
. /usr/share/bash-completion/bash_completion
elif [ -f /etc/bash_completion ]; then
. /etc/bash_completion
fi
fi
# if the command-not-found package is installed, use it
if [ -x /usr/lib/command-not-found -o -x /usr/share/command-not-found/command-not-found ]; then
function command_not_found_handle {
# check because c-n-f could've been removed in the meantime
if [ -x /usr/lib/command-not-found ]; then
/usr/bin/python /usr/lib/command-not-found -- "$1"
return $?
elif [ -x /usr/share/command-not-found/command-not-found ]; then
/usr/bin/python /usr/share/command-not-found/command-not-found -- "$1"
return $?
else
printf "%s: command not found\n" "$1" >&2
return 127
fi
}
fi
You can set up bash such that it sends a certain escape sequence to the terminal every time it starts an external program. If you use the escape sequence that terminals use to update their titles, your problem should be solved.
I have used that before, so I know it is possible. but I cannot remember it off the top of my head and do not have time to research the details right now, though.
Some of the old methods were removed from gnome-terminal 3.14 due to these two bugs (724110 and 740188).
In Ubuntu 20.04
PS1=$PS1"\[\e]0;New_Terminal_Name\a\]"
\[ begin a sequence of non-printing characters
\e]0; is the char sequence for setting the terminal title. Bash identifies this sequence and set the tile with the following characters. Number 0 turns out to be the value to reference the title property.
New_Terminal_Name is the tile we gave
\a is the ASCII bell character, also in this case, it marks the end of the tile to read from Bash.
\] end a sequence of non-printing characters
We can create a function for future use
function set_title(){
if [ -z "$PS1_BACK" ]; # set backup if it is empty
then
PS1_BACK="$PS1"
fi
TITLE="\[\e]0;$*\a\]"
PS1="${PS1_BACK}${TITLE}"
}
Open the ~/.bashrc file in your home directory with a text editor and append the above function at the end of it. Save and close.
To use it immediately source it to the current terminal.
source ~/.bashrc
We can use it then like this
set_title <New terminal tab title>
My terminal window titler script
This dynamic backgrounded script show all running command with pid number and elapsed time in seconds, like if I run du -h | less, this will build title looking like:
204640 6 du -h | 204641 6 less
Then when no command (other than himself) are running, don't change the terminal title, so standard behaviours works normaly.
First run start backgroud task. Second run in same terminal ask for kill previous backgrounded task.
Save this into a file, set execute flag then run it without argument:
cat <<"EOF" >titleWin.sh
#!/bin/bash
## Ask for kill process if already started
mapfile -t pids < <(ps -C ${0##*/} ho pid)
for pid in ${pids[#]} ;do
if [[ $pid != $$ ]] && [ -d /proc/$pid ]; then
echo -n "STARTED: [$pid]: ${0##*/}. Kill them (Y/n)? "
read -rsn 1 act
case $act in
n|N ) echo No;;
* ) echo Yes;kill $pid ;;
esac
exit
fi
done
## Title win for xterm or screen (or tmux).
case $TERM in
xterm*|rxvt* ) titleFmt='\e];%s\a';;
screen* ) titleFmt='\ek%s\e\\';;
* ) echo "Unable to title window.";exit 1;;
esac
tty=$(tty)
## Date to epochseconds converter
exec {dateout}<> <(:)
exec {datein}> >(exec stdbuf -o0 date -f - +%s >&$dateout)
DPID=$!
trap "echo TRAP;kill $DPID" 1 2 3 6 9 15
# Main loop
while :;do
string=""
while read -r pid wday mon day time year cmd; do
if [[ $pid != $$ ]] && [[ $pid != $PPID ]] && [[ $pid != $BASHPID ]] &&
[[ $pid != $DPID ]] && [ "${cmd#*pid,lstart,cmd}" ] &&
[ -d /proc/$pid ] ;then
echo >&${datein} $wday $mon $day $time $year
read -ru $dateout date
string+="$pid $((EPOCHSECONDS-date)) $cmd | "
fi
done < <(exec ps --tty ${tty#*/dev/} ho pid,lstart,cmd)
[[ "$string" ]] && printf "$titleFmt" "${string% | }"
sleep .333
done &
EOF
chmod +x titleWin.sh
./titleWin.sh
I have a bash program that will write to an output file. This file may or may not exist, but the script must check permissions and fail early. I can't find an elegant way to make this happen. Here's what I have tried.
set +e
touch $file
set -e
if [ $? -ne 0 ]; then exit;fi
I keep set -e on for this script so it fails if there is ever an error on any line. Is there an easier way to do the above script?
Why complicate things?
file=exists_and_writeable
if [ ! -e "$file" ] ; then
touch "$file"
fi
if [ ! -w "$file" ] ; then
echo cannot write to $file
exit 1
fi
Or, more concisely,
( [ -e "$file" ] || touch "$file" ) && [ ! -w "$file" ] && echo cannot write to $file && exit 1
Rather than check $? on a different line, check the return value immediately like this:
touch file || exit
As long as your umask doesn't restrict the write bit from being set, you can just rely on the return value of touch
You can use -w to check if a file is writable (search for it in the bash man page).
if [[ ! -w $file ]]; then exit; fi
Why must the script fail early? By separating the writable test and the file open() you introduce a race condition. Instead, why not try to open (truncate/append) the file for writing, and deal with the error if it occurs? Something like:
$ echo foo > output.txt
$ if [ $? -ne 0 ]; then die("Couldn't echo foo")
As others mention, the "noclobber" option might be useful if you want to avoid overwriting existing files.
Open the file for writing. In the shell, this is done with an output redirection. You can redirect the shell's standard output by putting the redirection on the exec built-in with no argument.
set -e
exec >shell.out # exit if shell.out can't be opened
echo "This will appear in shell.out"
Make sure you haven't set the noclobber option (which is useful interactively but often unusable in scripts). Use > if you want to truncate the file if it exists, and >> if you want to append instead.
If you only want to test permissions, you can run : >foo.out to create the file (or truncate it if it exists).
If you only want some commands to write to the file, open it on some other descriptor, then redirect as needed.
set -e
exec 3>foo.out
echo "This will appear on the standard output"
echo >&3 "This will appear in foo.out"
echo "This will appear both on standard output and in foo.out" | tee /dev/fd/3
(/dev/fd is not supported everywhere; it's available at least on Linux, *BSD, Solaris and Cygwin.)