I want to get surprisal values from logit outputs from PyTorch, using log base 2.
One way to do this, given a logits tensor, is:
probs = nn.functional.softmax(logits, dim = 2)
surprisals = -torch.log2(probs)
However, PyTorch provides a function that combines log and softmax, which is faster than the above:
surprisals = -nn.functional.log_softmax(logits, dim = 2)
But this seems to return values in base e, which I don't want. Is there a function like log_softmax, but which uses base 2? I have tried log2_softmax and log_softmax2, neither of which seems to work, and haven't had any luck finding documentation online.
How about just using the fact that logarithm bases can be easily altered by the following mathematical identity
is what F.log_softmax() is giving you. All you need to do is
surprisals = - (1 / torch.log(2.)) * nn.functional.log_softmax(logits, dim = 2)
Its just a scalar multiplication. So, it hardly has any performance penalty.
Related
I am trying to multiply two complex matrices in PyTorch and it seems the torch.matmul functions is not added yet to PyTorch library for complex numbers.
Do you have any recommendation or is there another method to multiply complex matrices in PyTorch?
Currently torch.matmul is not supported for complex tensors such as ComplexFloatTensor but you could do something as compact as the following code:
def matmul_complex(t1,t2):
return torch.view_as_complex(torch.stack((t1.real # t2.real - t1.imag # t2.imag, t1.real # t2.imag + t1.imag # t2.real),dim=2))
When possible avoid using for loops as these will result in much slower implementations.
Vectorization is achieved by using built-in methods as demonstrated in the code I have attached.
For example, your code takes roughly 6.1s on CPU while the vectorized version takes only 101ms (~60 times faster) for 2 random complex matrices with dimensions 1000 X 1000.
Update:
Since PyTorch 1.7.0 (as #EduardoReis mentioned) you can do matrix multiplication between complex matrices similarly to real-valued matrices as follows:
t1 # t2
(for t1, t2 complex matrices).
I implemented this function for pytorch.matmul for complex numbers using torch.mv and it's working fine for time-being:
def matmul_complex(t1, t2):
m = list(t1.size())[0]
n = list(t2.size())[1]
t = torch.empty((1,n), dtype=torch.cfloat)
t_total = torch.empty((m,n), dtype=torch.cfloat)
for i in range(0,n):
if i == 0:
t_total = torch.mv(t1,t2[:,i])
else:
t_total = torch.cat((t_total, torch.mv(t1,t2[:,i])), 0)
t_final = torch.reshape(t_total, (m,n))
return t_final
I am new to PyTorch, so please correct me if I am wrong.
Suppose I need to build a network that takes two inputs:
A patient's information, represented as an array of features
Selected treatment, represented as one-hot encoded array
Now how do I build a network that outputs a 2D probability matrix A where A[i,j] represents the probability the patient will end up at state j under treatment i. Let's say there are n possible states, and under any treatment, the total probability of all n states sums up to 1.
I wanted to do this because I was motivated by a similar network, where the inputs are the same as above, but the output is a 1d array representing the expected lifetime after treatment i is delivered. And such network is built as follows:
def default_dense(feature_shape, n_treatment):
feature_input = keras.layers.Input(feature_shape)
treatment_input = keras.layers.Input((n_treatments,))
hidden_1 = keras.layers.Dense(16, activation = 'relu')(feature_input)
hidden_2 = keras.layers.Dense(16, activation = 'relu')(hidden_1)
output = keras.layers.Dense(n_treatments)(hidden_2)
output_on_action = keras.layers.multiply([output, treatment_input])
model = keras.models.Model([feature_input, treatment_input], output_on_action)
model.compile(optimizer=tf.optimizers.Adam(0.001),loss='mse')
return model
And the training is simply
model.fit(x = [features, encoded_treatments], y = encoded_treatments * lifetime[:, np.newaxis], verbose = 0)
This is super handy because when predicting, I can use np.ones() as the encoded_treatments, and the network gives expected lifetimes under all treatments, thus choosing the best one is one-step. Certainly I can create multiple networks, each for a treatment, but it would be much less efficient.
Now the questions is, can I do the same to probability output?
I have figured it out myself. The trick is to use RepeatVector() and Permute() layers to generate a matrix mask for treatments.
The output is an element-wise Multiply() of the mask and a Softmax() of same size.
I want to use python3 to build a zeroinflatedpoisson model. I found in library statsmodel the function statsmodels.discrete.count_model.ZeroInflatePoisson.
I just wonder how to use it. It seems I should do:
ZIFP(Y_train,X_train).fit().
But when I wanted to do prediction using X_test.
It told me the length of X_test doesn't fit X_train.
Or is there another package to fit this model?
Here is the code I used:
X1 = [random.randint(0,1) for i in range(200)]
X2 = [random.randint(1,2) for i in range(200)]
y = np.random.poisson(lam = 2,size = 100).tolist()
for i in range(100):y.append(0)
df['x1'] = x1
df['x2'] = x2
df['y'] = y
df_x = df.iloc[:,:-1]
x_train,x_test,y_train,y_test = train_test_split(df_x,df['y'],test_size = 0.3)
clf = ZeroInflatedPoisson(endog = y_train,exog = x_train).fit()
clf.predict(x_test)
ValueError:operands could not be broadcat together with shapes (140,)(60,)
also tried:
clf.predict(x_test,exog = np.ones(len(x_test)))
ValueError: shapes(60,) and (1,) not aligned: 60 (dim 0) != 1 (dim 0)
This looks like a bug to me.
As far as I can see:
If there are no explanatory variables, exog_infl, specified for the inflation model, then a array of ones is used to model a constant inflation probability.
However, if exog_infl in predict is None, then it uses the model.exog_infl which is an array of ones with the length equal to the training sample.
As work around specifying a 1-D array of ones of correct length in predict should work.
Try:
clf.predict(test_x, exog_infl=np.ones(len(test_x))
I guess the same problem will occur if exposure was used in the model, but is not explicitly specified in predict.
I ran into the same problem, landing me on this thread. As noted by Josef, it seems like you need to provide exog_infl with a 1-D array of ones of correct length to work.
However, the code Josef provided misses the 1-D array-part, so the full line required to generate the required array is actually
clf.predict(test_x, exog_infl=np.ones((len(test_x),1))
I've been trying to implement a custom objective function in Keras (the negative log likelihood of the normal distribution)
Keras expects one argument for the ground truth tensor, and one for the predictions tensor; for y_pred,I'm passing a tensor that should represent a nx2 matrix where the first column is the mean of the distribution, and the second the precision.
My problem is that I haven't been able to get a clear idea how I properly slice y_pred before passing it into the likelihood function without yielding the error
'Expected an array-like object, but found a Variable: maybe you are trying to call a function on a (possibly shared) variable instead of a numeric array?'
While I understand that I'm feeding l_func arguments of the variable type when it expects an array,I don't seem to be able to grok how to properly split the input y_pred variable into its mean and precision components to plug into the likelihood function. Here are some attempts; if someone could enlighten me about how to proceed, I would greatly appreciate it.
def log_likelihood(y_true,y_pred):
mu = T.vector('mu')
beta = T.vector('beta')
x=T.vector('x')
likelihood = .5*(beta*(x-mu)**2)-T.log(beta/(2*np.pi))
l_func = function([mu,beta,x], likelihood)
return(l_func(y_pred[:,0],y_pred[:,1],y_true))
def log_likelihood(y_true,y_pred):
likelihood = .5*(y_pred[:,1]*(y_true-y_pred[:,0])**2)-T.log(y_pred[:,1]/(2*np.pi))
l_func = function([y_true,y_pred], likelihood)
return(l_func(y_true,y_pred))
def log_likelihood(y_true,y_pred):
mu=y_pred[:,0]
beta=y_pred[:,1]
x=y_true
mu_function=function([y_pred],mu)
beta_function=function([y_pred],beta)
id_function=function([y_true],x)
likelihood = .5*(beta_function(y_pred)*(id_function(y_true)-mu_function(y_pred))**2)-T.log(beta_function(y_pred)/(2*np.pi))
l_func = function([y_true,y_pred], likelihood)
return(l_func(y_true,y_pred))
I want to make use of Theano's logistic regression classifier, but I would like to make an apples-to-apples comparison with previous studies I've done to see how deep learning stacks up. I recognize this is probably a fairly simple task if I was more proficient in Theano, but this is what I have so far. From the tutorials on the website, I have the following code:
def errors(self, y):
# check if y has same dimension of y_pred
if y.ndim != self.y_pred.ndim:
raise TypeError(
'y should have the same shape as self.y_pred',
('y', y.type, 'y_pred', self.y_pred.type)
)
# check if y is of the correct datatype
if y.dtype.startswith('int'):
# the T.neq operator returns a vector of 0s and 1s, where 1
# represents a mistake in prediction
return T.mean(T.neq(self.y_pred, y))
I'm pretty sure this is where I need to add the functionality, but I'm not certain how to go about it. What I need is either access to y_pred and y for each and every run (to update my confusion matrix in python) or to have the C++ code handle the confusion matrix and return it at some point along the way. I don't think I can do the former, and I'm unsure how to do the latter. I've done some messing around with an update function along the lines of:
def confuMat(self, y):
x=T.vector('x')
classes = T.scalar('n_classes')
onehot = T.eq(x.dimshuffle(0,'x'),T.arange(classes).dimshuffle('x',0))
oneHot = theano.function([x,classes],onehot)
yMat = T.matrix('y')
yPredMat = T.matrix('y_pred')
confMat = T.dot(yMat.T,yPredMat)
confusionMatrix = theano.function(inputs=[yMat,yPredMat],outputs=confMat)
def confusion_matrix(x,y,n_class):
return confusionMatrix(oneHot(x,n_class),oneHot(y,n_class))
t = np.asarray(confusion_matrix(y,self.y_pred,self.n_out))
print (t)
But I'm not completely clear on how to get this to interface with the function in question and give me a numpy array I can work with.
I'm quite new to Theano, so hopefully this is an easy fix for one of you. I'd like to use this classifer as my output layer in a number of configurations, so I could use the confusion matrix with other architectures.
I suggest using a brute force sort of a way. You need an output for a prediction first. Create a function for it.
prediction = theano.function(
inputs = [index],
outputs = MLPlayers.predicts,
givens={
x: test_set_x[index * batch_size: (index + 1) * batch_size]})
In your test loop, gather the predictions...
labels = labels + test_set_y.eval().tolist()
for mini_batch in xrange(n_test_batches):
wrong = wrong + int(test_model(mini_batch))
predictions = predictions + prediction(mini_batch).tolist()
Now create confusion matrix this way:
correct = 0
confusion = numpy.zeros((outs,outs), dtype = int)
for index in xrange(len(predictions)):
if labels[index] is predictions[index]:
correct = correct + 1
confusion[int(predictions[index]),int(labels[index])] = confusion[int(predictions[index]),int(labels[index])] + 1
You can find this kind of an implementation in this repository.