I'm creating an application that accepting users as sub-domains,
Ex: {user_id}.mywebsite.com, thus, every request has to be *.mywebsite.com.
Problem is that every sub domain has to be bind on the iis
user1.mywebsite.com
user2.mywebsite.com etc etc
My question is, is there a way to set a domain site to accept every sub-domain request?
This is basically what I want to do
Is there any way to do it without adding every user as sub-domain to the iis site?
Thanks in advance.
You can set up a catch-all site and then use ARR to forward the traffic,
<system.webServer>
<rewrite>
<rules>
<rule name="site1" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}" pattern="^(.*).site1.com$" />
</conditions>
<action type="Rewrite" url="http://localhost:8091/{R:0}" />
</rule>
<rule name="site2" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}" pattern="^(.*).site2.com$" />
</conditions>
<action type="Rewrite" url="http://localhost:8092/{R:0}" />
</rule>
</rules>
</rewrite>
</system.webServer>
Other supporting steps can be found in this blog post,
Related
I'm working on updating the stripe checkout from a website, I was doing it successfully on localhost but when I put it on live mode on a windows server it stopped working. The issue is that when I should be redirected to the checkout page from stripe, the url is altered and becomes something that doesn't make sense:
The correct url: www.checkout.stripe.com/pay/cs_...
The url that I get redirected to: www.mysite.com/pay/cs_..
I kept thinking what could be the causa of that and I think it's the URL rewrite rule that I have on the windows server. I would like to add an exception to the rule and allow the stripe checkout to initiate, but I have no idea how to do it.
Below is my web.config file:
<configuration>
<system.webServer>
<rewrite>
<rules>
<rule name="ReverseProxyInboundRule1" enabled="true" stopProcessing="true">
<match url="(.*)" />
<action type="Rewrite" url="http://localhost:8008/{R:1}" />
</rule>
<rule name="HTTPS" enabled="false" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="^OFF$" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/{R:1}" />
</rule>
</rules>
</rewrite>
</system.webServer>
</configuration>
I figured it out. This is my final web.config
<configuration>
<system.webServer>
<urlCompression doDynamicCompression="false" />
<rewrite>
<rules>
<clear />
<rule name="ReverseProxyInboundRule">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false" />
<action type="Rewrite" url="http://localhost:8008/{R:1}" />
</rule>
<rule name="stripe redirect in checkout" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{REQUEST_URI}" pattern="/pay/" />
</conditions>
<action type="Redirect" url="checkout.stripe.com{REQUEST_URI}" redirectType="SeeOther" />
</rule>
</rules>
</rewrite>
</system.webServer>
My issue was not really understanding the meaning of the options in the URL Rewrite. I checked the course URL Rewrite for Developers and it was really helpful. I was able to solve the issue quickly.
The file you have shown contains the inbound rewrite rules only. But you have an issue with response from your server. Thus, you should fix the outbound rewrite rule in the right config file.
In IIS 8, I want to redirect the url http://test.example.com to http://www.example.com/abc/123
I try this, but not work.
<rule name="test" stopProcessing="true">
<match url="^test.example.com$" />
<action type="Redirect" url="http://www.example.com/abc/123" />
</rule>
you could add the pattern like this
<rule name="RedirectDomain" enabled="true" stopProcessing="true">
<match url=".*" />
<conditions logicalGrouping="MatchAny" trackAllCaptures="true">
<add input="{HTTP_HOST}" pattern="(.*)test.example.com />
</conditions>
<action type="Redirect" url="http://www.example.com/abc/123" redirectType="Permanent" />
</rule>
In the IIS GUI on the given side you should be able to choose 'HTTP Redirect' from there you can type in a url to redirect the site to.
I don't know if this approach is the recommended (It is normally used to redirect HTTP request on a given site to use HTTPS), but it will solve your problem.
I have some old URLs in a forum application points to http://mydomain.tld/showthread.php?p=xxxx where xxxx is the an integer id.
My new forum application uses viewtopic.php?p=xxxx and I want to handle this using IIS web.config rewrite rules.
I have tried to add the last rule as the following:
<rewrite>
<rules>
<rule name="Redirect www to non www" patternSyntax="ECMAScript" stopProcessing="true">
<match url="(.*)" />
<action type="Redirect" url="http://domain.tld/{R:1}" />
<conditions>
<add input="{HTTP_HOST}" pattern="^domain\.tld" negate="true" />
</conditions>
</rule>
<!-- this for change from showthread.php to viewtopic.php -->
<rule name="Rewrite" stopProcessing="true">
<match url="(.*)showthread\.php" />
<action type="Rewrite" url="viewtopic\.php" appendQueryString="true" />
</rule>
</rules>
</rewrite>
However, it does not able to redirect to the viewtopic.php. Any suggestion?
I have to enable httpRedirect in the IIS. Then I used this redirect rule in the web.config at the root of my forum:
<httpRedirect enabled="true" exactDestination="true" httpResponseStatus="Found">
<add wildcard="*showthread.php" destination="/viewtopic.php?$P" />
</httpRedirect>
I use IIS 7.5
I have a website wich has a valid host like:
A) mysite.co.uk
and a DEFAULT host (using for testing proposes provided by the hosting company):
B) mysite.hosting.com
Website is visible on both address, creating a DUPLICATE CONTENT issue for Search Engine.
I need redirect all the traffic (for all pages) from B to A using a 301 redirect.
IIS7.5 Http Redirect it is not design for this situation so I suppose to use IIS 7.5 Url Rewrite Module.
My questions: how write the ROLE in my web.config? Thanks
Try adding something like this between the <System.webServer> tags in your web.config:
<rewrite>
<rules>
<rule name="Redirect mysite.hosting.com to mysite.co.uk" patternSyntax="Wildcard" stopProcessing="true">
<match url="*" />
<conditions>
<add input="{HTTP_HOST}" pattern="mysite.hosting.com" />
</conditions>
<action type="Redirect" url="http://mysite.co.uk/{R:0}" />
</rule>
</rules>
</rewrite>
Alternatively, you can do this using global rules by adding:
<rewrite>
<globalRules>
<rule name="Redirects to mysite.co.uk" patternSyntax="ECMAScript" stopProcessing="true">
<match url=".*" />
<conditions logicalGrouping="MatchAny">
<add input="{HTTP_HOST}" pattern="mysite.hosting.com$" />
</conditions>
<action type="Redirect" url="http://mysite.co.uk/{R:0}" />
</rule>
</globalRules>
</rewrite>
I want add a rewrite rule to IIS 7 rewrite.
I want to redirect a user from page
http://localhost/myapp/register.html to http://localhost/myapp/register/register.html
And similar for other pages.
Any help?
Can I do the same using a rewrite action?
Using IIS7 and Windows Server 2008.
Thanks.
I'm not sure if it suits your needs but you can try this one (and maybe make some small adjustments if the case):
<system.webServer>
<rewrite>
<rewriteMaps>
<rewriteMap name="Register Redirect">
<add key="register.html" value="/register/register.html" />
</rewriteMap>
</rewriteMaps>
<rules>
<rule name="Redirect rule1 for Register Redirect" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{URL}" pattern="^(.*)/register/(.*)(\.html)?$" negate="true" />
</conditions>
<action type="Redirect" url="{HOST}/register/{R:1}" appendQueryString="true" redirectType="Found" />
</rule>
</rules>
</rewrite>
</system.webServer>