I'm trying to install the Highcharts export server on a new Azure VM that runs on Ubuntu 20.04. I've installed node.js and npm, and when I try to run the npm install command:
sudo npm install highcharts-export-server -g
I get the following error:
Download already available at /tmp/phantomjs/phantomjs-2.1.1-linux-x86_64.tar.bz2
Verified checksum of previously downloaded file
Extracting tar contents (via spawned process)
Removing /usr/local/lib/node_modules/highcharts-export-server/node_modules/phantomjs-prebuilt/lib/phantom
Copying extracted folder /tmp/phantomjs/phantomjs-2.1.1-linux-x86_64.tar.bz2-extract-1634831384140/phantomjs-2.1.1-linux-x86_64 -> /usr/local/lib/node_modules/highcharts-export-server/node_modules/phantomjs-prebuilt/lib/phantom
Phantom installation failed { [Error: EACCES: permission denied, link '/tmp/phantomjs/phantomjs-2.1.1-linux-x86_64.tar.bz2-extract-1634831384140/phantomjs-2.1.1-linux-x86_64' -> '/usr/local/lib/node_modules/highcharts-export-server/node_modules/phantomjs-prebuilt/lib/phantom']
errno: -13,
code: 'EACCES',
syscall: 'link',
path:
'/tmp/phantomjs/phantomjs-2.1.1-linux-x86_64.tar.bz2-extract-1634831384140/phantomjs-2.1.1-linux-x86_64',
dest:
'/usr/local/lib/node_modules/highcharts-export-server/node_modules/phantomjs-prebuilt/lib/phantom' } Error: EACCES: permission denied, link '/tmp/phantomjs/phantomjs-2.1.1-linux-x86_64.tar.bz2-extract-1634831384140/phantomjs-2.1.1-linux-x86_64' -> '/usr/local/lib/node_modules/highcharts-export-server/node_modules/phantomjs-prebuilt/lib/phantom'
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! phantomjs-prebuilt#2.1.14 install: node install.js
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the phantomjs-prebuilt#2.1.14 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /root/.npm/_logs/2021-10-21T15_49_48_318Z-debug.log
Here is a screenshot:
I've also tried installing PhantomJS seperately using this command:
sudo npm install -g phantomjs#2.1.1 --unsafe-perm
(See: Why can't I install phantomjs (Error: EACCES: permission denied)?)
That didn't help.
How can I get past this error and install highcharts on our VM?
Fixed by updating NPM and nodejs to latest versions
Related
Please help me with this error
I ran the following command on iterm after installing node.js and adding it into the path
npm install -g create-react-app
I get the following error
npm ERR! syscall mkdir
npm ERR! path /usr/local/lib/node_modules/create-react-app
npm ERR! errno -13
npm ERR! Error: EACCES: permission denied, mkdir '/usr/local/lib/node_modules/create-react-app'
npm ERR! [Error: EACCES: permission denied, mkdir '/usr/local/lib/node_modules/create-react-app'] {
npm ERR! errno: -13,
npm ERR! code: 'EACCES',
npm ERR! syscall: 'mkdir',
npm ERR! path: '/usr/local/lib/node_modules/create-react-app'
npm ERR! }
npm ERR!
npm ERR! The operation was rejected by your operating system.
npm ERR! It is likely you do not have the permissions to access this file as the current user
npm ERR!
npm ERR! If you believe this might be a permissions issue, please double-check the
npm ERR! permissions of the file and its containing directories, or try running
npm ERR! the command again as root/Administrator.
npm ERR! A complete log of this run can be found in:
npm ERR! /Users/amaterasu/.npm/_logs/2022-01-04T08_36_06_018Z-debug.log ```
I ran into this earlier today and here is how I fixed it.
npm uninstall -g create-react-app
npx clear-npx-cache
npx create-react-app my-app
If you are interested on the details regarding this issue, than have a look at this github thread
For the npm packages you want to install globally, mainly you may encounter permission problems. This can usually be solved by adding sudo at the first of the line. So instead of:
create-react-app yourAppName
You can do this:
sudo npx create-react-app yourAppName
Following your root user password.
Also, to add more, there are some reported problems with the node js version and create react app. you can check the version of node installed in your Mac, by this command at your terminal:
node --version
if the installed version of the Node is 17.X, it can be assumed it is related to the problem.
It is always recommended to use the LTS version.
enter link description here
you need to have node version >=14 and npm >=5.6 use the command npx create-react-app myapp.
https://reactjs.org/docs/create-a-new-react-app.html#create-react-app
create one folder for react projects.
open that folder in terminal.(commandline)
And use npx create-react-app yourAppName.
Above error is permission related you dont have permission to create new folder under "/usr/local/lib/node_modules/create-react-app".
If this error still comes use sudo npx create-react-app yourAppName.
I want to create a new react native project. At first, I faced a problem when I ran npm install -g expo-cli and I solved it by installing nvm, then installing node and npm by nvm. When I ran expo init NewProject, I got this error.
Could you help me solving it, please?
Uncaught Error [Error: EACCES: permission denied, open
'/home/pgf/.expo/state.json.1309825572'] {
errno: -13,
code: 'EACCES',
syscall: 'open',
path: '/home/pgf/.expo/state.json.1309825572'
}
I tried sudo expo init; I got this ✖ Something when wrong installing JavaScript dependencies. Check your npm logs. Continuing to initialize the app. and it created a project. Bur when I ran the project with expo start I got this error
Uncaught Error [Error: EACCES: permission denied, open '/home/pgf/.expo/state.json.2684774492'] {
errno: -13,
code: 'EACCES',
syscall: 'open',
path: '/home/pgf/.expo/state.json.2684774492'
}
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! # start: `expo start`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the # start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm WARN Local package.json exists, but node_modules missing, did you mean to install?
npm ERR! A complete log of this run can be found in:
npm ERR! /home/pgf/.npm/_logs/2020-05-29T19_37_07_602Z-debug.log
and this error when I ran it with sudo expo start
Cannot determine which native SDK version your project uses because the module `expo` is not installed. Please install it with `yarn add expo` and try again.
Could you help me solving this?
For me, there was no need to run it with sudo, since I ran into permissions errors. I had to reinstall expo-cli globally without using sudo. After that in your project directory:
sudo rm -rf ~/.expo
npm run start
I am new to Linux and I am trying to get set-up with nodejs, but I have not been able to figure out why I can't install react. I am following directions that I have seen on the web, but I am wondering why I seem to not have the privileges necessary to install react. It's a personal environment, so I wasn't expecting any issue. Below is what I have run and the final error that the last line gave me.
sudo apt update && sudo apt upgrade
sudo apt install nodejs
sudo npm install npm
node -v
v8.10.0
npm -v
3.5.2
sudo npm install npm#latest -g
npm -v
6.10.0
npm install -g create-react-app
Everything above runs just fine until the last command. Then I get the following error, regardless of working directory.
npm WARN checkPermissions Missing write access to /usr/local/lib/node_modules
npm ERR! path /usr/local/lib/node_modules
npm ERR! code EACCES
npm ERR! errno -13
npm ERR! syscall access
npm ERR! Error: EACCES: permission denied, access '/usr/local/lib/node_modules'
npm ERR! { Error: EACCES: permission denied, access '/usr/local/lib/node_modules'
npm ERR! stack: 'Error: EACCES: permission denied, access \'/usr/local/lib/node_modules\'',
npm ERR! errno: -13,
npm ERR! code: 'EACCES',
npm ERR! syscall: 'access',
npm ERR! path: '/usr/local/lib/node_modules' }
npm ERR!
npm ERR! The operation was rejected by your operating system.
npm ERR! It is likely you do not have the permissions to access this file as the current user
npm ERR!
npm ERR! If you believe this might be a permissions issue, please double-check the
npm ERR! permissions of the file and its containing directories, or try running
npm ERR! the command again as root/Administrator (though this is not recommended).
npm ERR! A complete log of this run can be found in:
npm ERR! /home/me/.npm/_logs/2019-07-06T19_33_32_971Z-debug.log
Using npx (with npm 5.2+)
If you're using npm 5.2+, you may create a ReactJS app like below:
npx create-react-app my-app
Now your app is in a folder my-app, you can cd into the folder and run npm start.
Using older versions of npm with npm install
You may also install it with a global install with npm, infact for older npm versions (< 5.2) the official documentation for create-react-app links to instructions by Dan Abramov (#co-author of create-react-app):
npm install -g create-react-app
However you may need sudo for a global -g install or work around it
Everything above runs just fine until the last command. Then I get the following error, regardless of working directory.
That's because your last command is a global install (-g).
Unless there is a reason against, you may install it with sudo:
sudo npm install -g create-react-app
To install without sudo, please refer to this question: npm throws error without sudo
I was also having this issue, here is how it was resolved
Make sure you have npm installed or use:
sudo apt install npm
Then
sudo npm -g install create-react-app
To create the app I did not use 'npm' before the command line, instead use this:
create-react-app nameofyourapp
That worked for me.
I tried installing angular cli with npm. But I'm getting the below error while executing the command npm install -g #angular/cli.
I am not executing this command as admin, but as a user.
D:\AngularWorkstation>npm install -g #angular/cli
npm WARN sass-loader#6.0.6 requires a peer of node-sass#^4.0.0 but none is installed. You must install peer dependencies yourself.
npm ERR! path **D:\node_modules\node_modules\#angular\cli\node_modules\which\package.json.365294863
npm ERR! code EPERM
npm ERR! errno -4048
npm ERR! syscall rename
npm ERR! Error: EPERM: operation not permitted, rename 'D:\node_modules\node_modules\#angular\cli\node_modules\which\package.json.365294863' -> 'D:\node_modules\node_modules\#angular\cli\node_modules\which\package.json'
npm ERR! { Error: EPERM: operation not permitted, rename 'D:\node_modules\node_modules\#angular\cli\node_modules\which\package.json.365294863' -> 'D:\node_modules\node_modules\#angular\cli\node_modules\which\package.json'
npm ERR! cause:
npm ERR! { Error: EPERM: operation not permitted, rename 'D:\node_modules\node_modules\#angular\cli\node_modules\which\package.json.365294863' ->** 'D:\node_modules\node_modules\#angular\cli\node_modules\which\package.json'
npm ERR! errno: -4048,
npm ERR! code: 'EPERM',
npm ERR! syscall: 'rename',
npm ERR! path: 'D:\\node_modules\\node_modules\\#angular\\cli\\node_modules\\which\\package.json.365294863',
npm ERR! dest: 'D:\\node_modules\\node_modules\\#angular\\cli\\node_modules\\which\\package.json' },
npm ERR! stack: 'Error: EPERM: operation not permitted, rename \'D:\\node_modules\\node_modules\\#angular\\cli\\node_modules\\which\\package.json.365294863\' -> \'D:\\node_modules\\node_modules\\#angular\\cli\\node_modules\\which\\package.json\'',
npm ERR! errno: -4048,
npm ERR! code: 'EPERM',
npm ERR! syscall: 'rename',
npm ERR! path: 'D:\\node_modules\\node_modules\\#angular\\cli\\node_modules\\which\\package.json.365294863',
npm ERR! dest: 'D:\\node_modules\\node_modules\\#angular\\cli\\node_modules\\which\\package.json',
npm ERR! parent: '#angular/cli' }
npm ERR!
npm ERR! Please try running this command again as root/Administrator.
npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\techno\AppData\Roaming\npm-cache\_logs\2018-01-03T09_14_35_602Z-debug.log
*PS : I'm using Windows10 OS. I also tried changing the npm global path to'D:\node_modules' to check if it's due to permission issue. However the output is the same.
node --version : v7.7.2
npm --version : 4.1.2*
I had a similar issue when trying to install Yeoman with npm on Windows 10. The culprit turned out to be the McAfee AV software that was installed on my machine.
McAfee seemed to be scanning the changes that npm was trying to make to a json file and as part of the scanning routine, prevented the rename from occurring. This resulted in a 4048 error being raised by npm similar to the error in your output.
To get around this I:
Uninstalled McAfee and restarted my machine so that it reverted to Microsoft's built-in security software.
Re-ran the npm install command and it worked correctly.
Alternatively, you could change the settings of your AV software to not actively check file changes for the node_modules folder. This would hopefully allow your AV software to stay installed and the npm command to work too.
From your error logs, It seems that there is some permission issue while installing the packages. You can specifically resolve this issue by two ways.
1) If you are trying to install the packages globally then you have to run the npm install <pkg_name> -g command with the administrative user or using sudo npm install <pkg_name> -g command.
To install the npm-packages globally you can follow the steps below:
Run the command prompt as the administrative user.
Run npm install <pkg_name> -g.
2) You should try going to the top-level folder in Windows Explorer, right-click on "get more info" option then go down to the permissions section, give yourself all permissions, and tell it to apply them recursively.
Or simply you can go to specified npm working directory and edit to permission section and allow all the permission to the current user and also change the owner to itself for all the recursive directories as well.
Then boot up Windows again.
Note: If you are installing an npm-package locally, then you should be in your local project directory and can try running sudo npm install <pkg-name> command to install required package. the purpose of using sudo is that it will change your owner permissions so you can make your current user authorized to run npm commands.
I'd recommend you to take a look at https://docs.npmjs.com/getting-started/fixing-npm-permissions
1) uninstall node
2) download latest version of node from [https://nodejs.org/en/][1] .
3) install node js
I am attempting to globally install the electron module with npm on OS X Sierra. When I run
sudo npm install electron -g
I get
/usr/local/bin/electron -> /usr/local/lib/node_modules/electron/cli.js
> electron#1.7.5 postinstall /usr/local/lib/node_modules/electron
> node install.js
/usr/local/lib/node_modules/electron/install.js:48
throw err
^
Error: EACCES: permission denied, mkdir '/usr/local/lib/node_modules/electron/dist'
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! electron#1.7.5 postinstall: `node install.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the electron#1.7.5 postinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /Users/ianwise/.npm/_logs/2017-08-10T22_16_42_927Z-debug.log
The problem seems to be a permission denied when npm runs mkdir... But I'm running this with sudo, so why is this a problem?
I think you're running as root. run the following command.
npm config set unsafe-perm true
sudo npm install electron -g
I had exactly the same issue with electron.
Assuming you have checked that the relevant directories are writable with:
$ ls -l
In the end I tried without sudo and it worked...!
$ npm install electron -g
The process completed with a message saying:
npm notice created a lockfile as package-lock.json. You should commit this file.
I just deleted the package-lock.json file
For me, the process also completed with a message saying:
npm update check failed
I followed the instructions at Ubuntu: npm update failed to fix this