I am new here. I wanted to ask a question on using REGEX for an entity in DialogFlow
I wanted the entity to accept all text and spaces except for the symbol *
I have tried to use [A-Za-z0-9 ][^*], but it is not working. Any advice. thanks!
In your Regex expression, [^*] means "capture any character at the start of the line." To refer to a literal asterisk rather than matching any character, you need to use \*
If you want to match a line of letters or numbers as in the [A-Za-z0-9] example you give, but only if that string does not include an asterisk, then this expression should work for you:
^[a-zA-Z0-9]+$
This means "match a whole line of text if it only contains one or more of the characters a-z, A-Z, or 0-9".
If you want to match any character or group of characters in a line except for the asterisk, then you could use something like this:
(?!\*)([a-zA-Z0-9]+)(?<!\*)
The first part is called a "negative lookahead," and it looks forward to ensure we're not matching the asterisk. The last part is called a "negative lookbehind," and it looks backwards to make sure we're not matching the asterisk. The middle part is your "capture group," and confirms that you're matching any letters or numbers in a given string, but excluding the * character.
If this Regex gets input like *abc, it will capture abc. If it encounters abc*, it will still capture abc. If it encounters abc*def, it will capture abc and def separately in two capture groups, because it will break around the asterisk.
This link explains the concept of lookarounds in Regex. You can also use this Regex tester to get started practicing your Regular Expressions with explanations of what each block of characters does.
EDITED TO ADD If you're just interested in matching single characters rather than groups of characters, you can use [A-Za-z0-9] and match any upper or lowercase letter and any single digit. You don't need to exclude the * character, because the character group is already exclusive.
This is a slight duplicate of the question below, so responses here may also help you. Hope this helps!
How can I exclude asterisk in a regex expression
[A-Za-z0-9 ][^*]
What you regex will do is match 2 consecutive characters. First, it will look for anything A-Za-z0-9 . Then, it will look at the negated set that includes *, and will match ANY character except *.
You can type your regex into https://regexr.com/ to see a breakdown of how it matches and test some strings.
For example, your regex would match these:
Aa
AA
a&
A1
0_
But would not match these:
A*
a*
1*
And WOULD NOT match anything longer than 2 characters. If you really want to match any string with any characters except *, this should work:
[^\*]+
What that will do is match any number of consecutive characters that are not *. (The + means match 1 or more characters in the set). It is also a good idea to escape * because it is also a reserved character in regex. Even though most regex parsers are smart enough to know that inside a group you probably mean the literal char *, it is still a best practice to escape it. (And by that same token, you would want to use \s instead of the blank space in your original regex.)
https://regex101.com/r/sB9wW6/1
(?:(?<=\s)|^)#(\S+) <-- the problem in positive lookbehind
Working like this on prod: (?:\s|^)#(\S+), but I need a correct start index (without space).
Here is in JS:
var regex = new RegExp(/(?:(?<=\s)|^)#(\S+)/g);
Error parsing regular expression: Invalid regular expression:
/(?:(?<=\s)|^)#(\S+)/
What am I doing wrong?
UPDATE
Ok, no lookbehind in JS :(
But anyways, I need a regex to get the proper start and end index of my match. Without leading space.
Make sure you always select the right regex engine at regex101.com. See an issue that occurred due to using a JS-only compatible regex with [^] construct in Python.
JS regex - at the time of answering this question - did not support lookbehinds. Now, it becomes more and more adopted after its introduction in ECMAScript 2018. You do not really need it here since you can use capturing groups:
var re = /(?:\s|^)#(\S+)/g;
var str = 's #vln1\n#vln2\n';
var res = [];
while ((m = re.exec(str)) !== null) {
res.push(m[1]);
}
console.log(res);
The (?:\s|^)#(\S+) matches a whitespace or the start of string with (?:\s|^), then matches #, and then matches and captures into Group 1 one or more non-whitespace chars with (\S+).
To get the start/end indices, use
var re = /(\s|^)#\S+/g;
var str = 's #vln1\n#vln2\n';
var pos = [];
while ((m = re.exec(str)) !== null) {
pos.push([m.index+m[1].length, m.index+m[0].length]);
}
console.log(pos);
BONUS
My regex works at regex101.com, but not in...
First of all, have you checked the Code Generator link in the Tools pane on the left?
All languages - "Literal string" vs. "String literal" alert - Make sure you test against the same text used in code, literal string, at the regex tester. A common scenario is copy/pasting a string literal value directly into the test string field, with all string escape sequences like \n (line feed char), \r (carriage return), \t (tab char). See Regex_search c++, for example. Mind that they must be replaced with their literal counterparts. So, if you have in Python text = "Text\n\n abc", you must use Text, two line breaks, abc in the regex tester text field. Text.*?abc will never match it although you might think it "works". Yes, . does not always match line break chars, see How do I match any character across multiple lines in a regular expression?
All languages - Backslash alert - Make sure you correctly use a backslash in your string literal, in most languages, in regular string literals, use double backslash, i.e. \d used at regex101.com must written as \\d. In raw string literals, use a single backslash, same as at regex101. Escaping word boundary is very important, since, in many languages (C#, Python, Java, JavaScript, Ruby, etc.), "\b" is used to define a BACKSPACE char, i.e. it is a valid string escape sequence. PHP does not support \b string escape sequence, so "/\b/" = '/\b/' there.
All languages - Default flags - Global and Multiline - Note that by default m and g flags are enabled at regex101.com. So, if you use ^ and $, they will match at the start and end of lines correspondingly. If you need the same behavior in your code check how multiline mode is implemented and either use a specific flag, or - if supported - use an inline (?m) embedded (inline) modifier. The g flag enables multiple occurrence matching, it is often implemented using specific functions/methods. Check your language reference to find the appropriate one.
line-breaks - Line endings at regex101.com are LF only, you can't test strings with CRLF endings, see regex101.com VS myserver - different results. Solutions can be different for each regex library: either use \R (PCRE, Java, Ruby) or some kind of \v (Boost, PCRE), \r?\n, (?:\r\n?|\n)/(?>\r\n?|\n) (good for .NET) or [\r\n]+ in other libraries (see answers for C#, PHP). Another issue related to the fact that you test your regex against a multiline string (not a list of standalone strings/lines) is that your patterns may consume the end of line, \n, char with negated character classes, see an issue like that. \D matched the end of line char, and in order to avoid it, [^\d\n] could be used, or other alternatives.
php - You are dealing with Unicode strings, or want shorthand character classes to match Unicode characters, too (e.g. \w+ to match Стрибижев or Stribiżew, or \s+ to match hard spaces), then you need to use u modifier, see preg_match() returns 0 although regex testers work - To match all occurrences, use preg_match_all, not preg_match with /...pattern.../g, see PHP preg_match to find multiple occurrences and "Unknown modifier 'g' in..." when using preg_match in PHP?- Your regex with inline backreference like \1 refuses to work? Are you using a double quoted string literal? Use a single-quoted one, see Backreference does not work in PHP
phplaravel - Mind you need the regex delimiters around the pattern, see https://stackoverflow.com/questions/22430529
python - Note that re.search, re.match, re.fullmatch, re.findall and re.finditer accept the regex as the first argument, and the input string as the second argument. Not re.findall("test 200 300", r"\d+"), but re.findall(r"\d+", "test 200 300"). If you test at regex101.com, please check the "Code Generator" page. - You used re.match that only searches for a match at the start of the string, use re.search: Regex works fine on Pythex, but not in Python - If the regex contains capturing group(s), re.findall returns a list of captures/capture tuples. Either use non-capturing groups, or re.finditer, or remove redundant capturing groups, see re.findall behaves weird - If you used ^ in the pattern to denote start of a line, not start of the whole string, or used $ to denote the end of a line and not a string, pass re.M or re.MULTILINE flag to re method, see Using ^ to match beginning of line in Python regex
- If you try to match some text across multiple lines, and use re.DOTALL or re.S, or [\s\S]* / [\s\S]*?, and still nothing works, check if you read the file line by line, say, with for line in file:. You must pass the whole file contents as the input to the regex method, see Getting Everything Between Two Characters Across New Lines. - Having trouble adding flags to regex and trying something like pattern = r"/abc/gi"? See How to add modifers to regex in python?
c#, .net - .NET regex does not support possessive quantifiers like ++, *+, ??, {1,10}?, see .NET regex matching digits between optional text with possessive quantifer is not working - When you match against a multiline string and use RegexOptions.Multiline option (or inline (?m) modifier) with an $ anchor in the pattern to match entire lines, and get no match in code, you need to add \r? before $, see .Net regex matching $ with the end of the string and not of line, even with multiline enabled - To get multiple matches, use Regex.Matches, not Regex.Match, see RegEx Match multiple times in string - Similar case as above: splitting a string into paragraphs, by a double line break sequence - C# / Regex Pattern works in online testing, but not at runtime - You should remove regex delimiters, i.e. #"/\d+/" must actually look like #"\d+", see Simple and tested online regex containing regex delimiters does not work in C# code - If you unnecessarily used Regex.Escape to escape all characters in a regular expression (like Regex.Escape(#"\d+\.\d+")) you need to remove Regex.Escape, see Regular Expression working in regex tester, but not in c#
dartflutter - Use raw string literal, RegExp(r"\d"), or double backslashes (RegExp("\\d")) - https://stackoverflow.com/questions/59085824
javascript - Double escape backslashes in a RegExp("\\d"): Why do regex constructors need to be double escaped?
- (Negative) lookbehinds unsupported by most browsers: Regex works on browser but not in Node.js - Strings are immutable, assign the .replace result to a var - The .replace() method does change the string in place - Retrieve all matches with str.match(/pat/g) - Regex101 and Js regex search showing different results or, with RegExp#exec, RegEx to extract all matches from string using RegExp.exec- Replace all pattern matches in string: Why does javascript replace only first instance when using replace?
javascriptangular - Double the backslashes if you define a regex with a string literal, or just use a regex literal notation, see https://stackoverflow.com/questions/56097782
java - Word boundary not working? Make sure you use double backslashes, "\\b", see Regex \b word boundary not works - Getting invalid escape sequence exception? Same thing, double backslashes - Java doesn't work with regex \s, says: invalid escape sequence - No match found is bugging you? Run Matcher.find() / Matcher.matches() - Why does my regex work on RegexPlanet and regex101 but not in my code? - .matches() requires a full string match, use .find(): Java Regex pattern that matches in any online tester but doesn't in Eclipse - Access groups using matcher.group(x): Regex not working in Java while working otherwise - Inside a character class, both [ and ] must be escaped - Using square brackets inside character class in Java regex - You should not run matcher.matches() and matcher.find() consecutively, use only if (matcher.matches()) {...} to check if the pattern matches the whole string and then act accordingly, or use if (matcher.find()) to check if there is a single match or while (matcher.find()) to find multiple matches (or Matcher#results()). See Why does my regex work on RegexPlanet and regex101 but not in my code?
scala - Your regex attempts to match several lines, but you read the file line by line (e.g. use for (line <- fSource.getLines))? Read it into a single variable (see matching new line in Scala regex, when reading from file)
kotlin - You have Regex("/^\\d+$/")? Remove the outer slashes, they are regex delimiter chars that are not part of a pattern. See Find one or more word in string using Regex in Kotlin - You expect a partial string match, but .matchEntire requires a full string match? Use .find, see Regex doesn't match in Kotlin
mongodb - Do not enclose /.../ with single/double quotation marks, see mongodb regex doesn't work
c++ - regex_match requires a full string match, use regex_search to find a partial match - Regex not working as expected with C++ regex_match - regex_search finds the first match only. Use sregex_token_iterator or sregex_iterator to get all matches: see What does std::match_results::size return? - When you read a user-defined string using std::string input; std::cin >> input;, note that cin will only get to the first whitespace, to read the whole line properly, use std::getline(std::cin, input); - C++ Regex to match '+' quantifier - "\d" does not work, you need to use "\\d" or R"(\d)" (a raw string literal) - This regex doesn't work in c++ - Make sure the regex is tested against a literal text, not a string literal, see Regex_search c++
go - Double backslashes or use a raw string literal: Regular expression doesn't work in Go - Go regex does not support lookarounds, select the right option (Go) at regex101.com before testing! Regex expression negated set not working golang
groovy - Return all matches: Regex that works on regex101 does not work in Groovy
r - Double escape backslashes in the string literal: "'\w' is an unrecognized escape" in grep - Use perl=TRUE to PCRE engine ((g)sub/(g)regexpr): Why is this regex using lookbehinds invalid in R?
oracle - Greediness of all quantifiers is set by the first quantifier in the regex, see Regex101 vs Oracle Regex (then, you need to make all the quantifiers as greedy as the first one)] - \b does not work? Oracle regex does not support word boundaries at all, use workarounds as shown in Regex matching works on regex tester but not in oracle
firebase - Double escape backslashes, make sure ^ only appears at the start of the pattern and $ is located only at the end (if any), and note you cannot use more than 9 inline backreferences: Firebase Rules Regex Birthday
firebasegoogle-cloud-firestore - In Firestore security rules, the regular expression needs to be passed as a string, which also means it shouldn't be wrapped in / symbols, i.e. use allow create: if docId.matches("^\\d+$").... See https://stackoverflow.com/questions/63243300
google-data-studio - /pattern/g in REGEXP_REPLACE must contain no / regex delimiters and flags (like g) - see How to use Regex to replace square brackets from date field in Google Data Studio?
google-sheets - If you think REGEXEXTRACT does not return full matches, truncates the results, you should check if you have redundant capturing groups in your regex and remove them, or convert the capturing groups to non-capturing by add ?: after the opening (, see Extract url domain root in Google Sheet
sed - Why does my regular expression work in X but not in Y?
word-boundarypcrephp - [[:<:]] and [[:>:]] do not work in the regex tester, although they are valid constructs in PCRE, see https://stackoverflow.com/questions/48670105
snowflake-cloud-data-platform snowflake-sql - If you are writing a stored procedure, and \\d does not work, you need to double them again and use \\\\d, see REGEX conversion of VARCHAR value to DATE in Snowflake stored procedure using RLIKE not consistent.
I don't see the Sublime regex documentation saying anything about how to use matched patterns in the replace function. I tried to use the PHP/htaccess format of $0 (and $1 just in case the indexes start with 1), but no luck.
What I'm trying to do, is go through all my methods, and make static methods begin with an uppercase letter. So I would like to change all calls to Foo::bar() (PHP syntax) into Foo::Bar(). So even if I knew how to use the matched pattern (in this case b), is there a way to make it uppercase in the replace field?
These operators are described in the Boost regex library reference:
\u Causes the next character to be outputted, to be output in upper case.
So, you may use \u uppercase operator in the replacement pattern to make the first character after it uppercase.
Search: ::(\w+\(\))
Replace: ::\u$1
I have a file that is out-of-date and needs to be updated. The names have changed somewhat and I would like to clean them all up using a single substitution.
Here's what I'm trying to accomplish:
foo.foo_[single word] -> foo_bar.foo_[single word]_bar
where a single word is a string of n characters. In the file, they are always preceded by an underscore, but it needs to have "_bar" appended. There is always a "." after these instances, so I thought the following might work:
%s/foo\.foo_*\./foo_bar\.foo_*_bar\./g
Sadly, the first part doesn't even match what I want, so I'm back to square one.
I would first change:
foo_[word] -> foo_[word]_bar
and then
foo. -> foo_bar.
i.e.:
%s,\(foo_\w\+\),\1_bar,g|%s,foo\.,foo_bar\.,g
There are many ways to skin a cat but following should do the trick
%s/\vfoo.foo_(\w+)/foo_bar.foo_\1_bar/gc
what loosely translates to
\v Very Magic (:help magic)
foo.foo_ Search for exact string
(\w+) Search for a "word" and store in a backreference
/foo_bar.foo Replace search pattern with this exact string
\1 appended with backreference 1
_bar appended with _bar
or if you don't want to repeat the search in the replace part, you can go a bit nuts with backreferences and use
%s/\v(foo)\.foo_(\w+)/\1_bar.\1_\2_bar/gc
The most important parts you were missing were
using backreferences (:helpgrep backref)
using character classes (:h \w)
using repetition (_* is searching for 0 or more underscores. You probably meant _.*)
I have the following string in the code at multiple places,
m_cells->a[ Id ]
and I want to replace it with
c(Id)
where the string Id could be anything including numbers also.
A regular expression replace like below should do:
%s/m_cells->a\[\s\(\w\+\)\s\]/c(\1)/g
If you wish to apply the replacement operation on a number of files you could use the :bufdo command.
Full explanation of #BasBossink's answer (as a separate answer because this won't fit in a comment), because regexes are awesome but non-trivial and definitely worth learning:
In Command mode (ie. type : from Normal mode), s/search_term/replacement/ will replace the first occurrence of 'search_term' with 'replacement' on the current line.
The % before the s tells vim to perform the operation on all lines in the document. Any range specification is valid here, eg. 5,10 for lines 5-10.
The g after the last / performs the operation "globally" - all occurrences of 'search_term' on the line or lines, not just the first occurrence.
The "m_cells->a" part of the search term is a literal match. Then it gets interesting.
Many characters have special meaning in a regex, and if you want to use the character literally, without the special meaning, then you have to "escape" it, by putting a \ in front.
Thus \[ and \] match the literal '[' and ']' characters.
Then we have the opposite case: literal characters that we want to treat as special regex entities.
\s matches white*s*pace (space, tab, etc.).
\w matches "*w*ord" characters (letters, digits, and underscore _).
(. matches any character (except a newline). \d matches digits. There are more...)
If a character is not followed by a quantifier, then exactly one such character matches. Thus, \s will match one space or tab, but not fewer or more.
\+ is a quantifier, and means "one or more". (\? matches 0 or 1; * (with no backslash) matches any number: zero or more. Warning: matching on zero occurrences takes a little getting used to; when you're first learning regexes, you don't always get the results you expected. It's also possible to match on an arbitrary exact number or range of occurrences, but I won't get into that here.)
\( and \) work together to form a "capturing group". This means that we don't just want to match on these characters, we also want to remember them specially so that we can do something with them later. You can have any number of capturing groups, and they can be nested too. You can refer to them later by number, starting at 1 (not 0). Just start counting (escaped) left-parantheses from the left to determine the number.
So here, we are matching a space followed by a group (which we will capture) of at least one "word" character followed by a space, within the square brackets.
Then section between the second and third / is the replacement text.
The "c" is literal.
\1 means the first captured group, which in this case will be the "Id".
In summary, we are finding text that matches the given description, capturing part of it, and replacing the entire match with the replacement text that we have constructed.
Perhaps a final suggestion: c after the final / (doesn't matter whether it comes before or after the 'g') enables *c*onfirmation: vim will highlight the characters to be replaced and will show the replacement text and ask whether you want to go ahead. Great for learning.
Yes, regexes are complicated, but super powerful and well worth learning. Once you have them internalized, they're actually fairly easy. I suggest that, as with learning vim itself, you start with the basics, get fluent in them, and then incrementally add new features to your repertoire.
Good luck and have fun.