VSCode integrated terminal failed to launch and the error showed up:
The terminal process failed to launch: Path to shell executable "bash" is not a file of a symlink.
Tried to look for solution in official troubleshoot page but can't really figured the cause of the problem.
Starting an external terminal (gnome-terminal) using CtrlAltT is fine.
Also tried to re-install VSCode, removing cache etc. still the same issues. Happens to almost all my Ubuntu computer.
There is a similar fix in Windows https://stackoverflow.com/a/64020049/16346600, but how to do it in Linux? More particularly I can't find this terminal.integrated.shell.linux.
OS: Ubuntu18.04 LTS
VSCode: Version 1.57.1
It seems like VSCode somehow cannot find the path to executable for default profile "bash".
I fix by providing the exact binary path to bash.
Inside settings.json:
"terminal.integrated.profiles.linux": {
"bash": {
"path": "/bin/bash"
},
...
}
I just downloaded and installed Anaconda3 on windows 10 platform.
Apparently, the installation process finished successfully however I can't open Anaconda Navigator.
What I'm doing is just clicking on "Anaconda Navigator" icon from start menu.
After a while an empty console window pops up twice, then it desappears immediately without showing an error message and nothing seems to happen after that.
I've been reading about similar errors and found out that running this command, conda update --all might solve the problem.
I tried it out, but ended up getting a network connection problem for a particular URL.
But my internet connection is working fine since I'm actually able to access that URL from the browser and get a response.
It's worth mentioning that I've already uninstall Anaconda3 and set up the following user environment variables.
Any help would be appreciated, thanks in advance!
Finally found a solution to this problem, I recommend you to read the official documentation and follow the steps described there in order to make sure everything was installed correctly.
Check out this article:
https://docs.anaconda.com/anaconda/install/verify-install/
After trying to starting up Anaconda Navigator from the console I got this specific error that helped me to get a final solution.
Basically I just had to move some files within anaconda3 installation folder from one path to another.
Navigate to %ANACONDA_HOME%\Library\bin, there you will find the files listed below
libcrypto-1_1-x64.dll
libcrypto-1_1-x64.pdb
libssl-1_1-x64.dll
libssl-1_1-x64.pdb
So, just move them to this path: %ANACONDA_HOME%\DLLs
Give it a try one more time and you will be able to run it.
Note:
%ANACONDA_HOME% refers to Anaconda3 installation folder in your computer.
This answer is based on this link: Anaconda navigator not launching windows 10 (Spyder as well)
After installing the Python extension, I find myself not being able to debug. When I select any of the default launch configurations and press the green arrow to start debugging, it notifies me with the error message in the title. I am not using any external modules, I am simply trying to run a single line hello world program and this error still appears. I have tried reinstalling the extension, deleting the .vscode folder and checking the path of my Python interpreter.
I had the same problem, it was gone after I delete c:\users\username\ .code and reinstall vscode. hope that helps.
Lidong
I am using Ubuntu 17 and installed Rabbitvcs. When I want to execute update or commit commands, sometimes I encounter with
"Error while performing action: Unable to connect to a repository at URL 'https://argesrv:3289/svn/Master/Fire/Projects'
Error running context: Timeout on connection".
However sometimes those commands can be completed successfully. I checked the server is working correctly and tried with tortoisesvn on windows in same computer, there is no problem about this issue.
Also, there is one more problem with rabbitvcs : Sometimes rabbitvcs menus doesn't appear on nautilus but after a while they appears automatically.
I solved the problem. Because of checkout directory disk name has space character, this problem has occured sometimes. When I changed the name the problem was gone.
I recently reinstalled Cygwin on my computer in order to get access to several command line elements that I was missing. I have never had previous difficulty with Cygwin, but after this reinstallation, an error message continues to appear after (almost) each command entered. For instance:
-bash-4.1$ wc m1.txt
3 [main] bash 2216 child_info_fork::abort: data segment start: parent(0x26D000) != child(0x38D000)
-bash: fork: retry: Resource temporarily unavailable
2013930 4027950 74968256 m1.txt
Generally, the command still runs (as seen above), but not always. Occasionally, the 'error' message occurs several times in a row (the initial number "3" will then change to a "4" or "2", notably if I start a second Cygwin window.
Also, as soon as I start up Cygwin, I get the following message before the prompt:
3 [main] bash 6140 child_info_fork::abort: data segment start: parent(0x26D000) != child(0x36D000)
-bash: fork: retry: Resource temporarily unavailable
-bash: fork: Resource temporarily unavailable
-bash-4.1$
At the moment, I am debating whether to uninstall/reinstall Cygwin again or just live with the error messages, but I was curious if there might be an issue that I am unaware of.
(assuming Cygwin is installed at C:\Cygwin):
Open Task Manager and close any processes that look to be Cygwin related.
Open C:\Cygwin\bin in Windows Explorer
Verify that dash.exe, ash.exe, rebase.exe, and rebaseall exist in this folder
If any of them are missing, re-run Cygwin setup and select the dash, ash, and rebase packages
right-click your C:\Cygwin folder, uncheck Read-only (if its checked), and press OK.
When an error about not being able to switch some files comes up, select "Ignore All". Wait for this process to complete.
Browse to C:\Cygwin\bin in Windows Explorer
Right click dash.exe and click "Run as Administrator". A command Prompt should appear with nothing but a $
Type /usr/bin/rebaseall -v, hit enter, and wait for the process to complete.
If you get errors about Cygwin processes running, try Step 1 again. If that still doesn't work, Restart your computer into safe mode and try these steps again.
A commenter noted that, depending on your settings, you may have to type cd /usr/bin && ./rebaseall -v instead.
Try opening Cygwin again.
This process worked for me. I hope it works for you guys too.
Source: http://cygwin.wikia.com/wiki/Rebaseall
I would like to add the following to the above answers, as it is what I had to do after reinstalling Cygwin:
Navigate to the "/usr/bin" directory (usually, C:\cygwin\bin) and right click, Run as Administrator the file: dash.exe
Then, at the $ prompt type the following, hitting enter after each line:
cd /usr/bin/
/usr/bin/peflags * -d 1
/usr/bin/rebaseall -v
What it does is, it marks the dll's as "rebase-able," and then rebases them. You have to have peflags.exe in addition to the above files (in previous answers). You may have to restart windows after doing this and you will definitely need to make sure that there are no processes nor services belonging to cygwin running. (Use task manager, kill any related processes, and then under the services tab look for any service starting with CYG and stop it.)
After doing this, I was able to get cygwin to run without any errors about dll's being loaded to the wrong addresses aka fork errors, etc.
I hope that this helps others, as it was a pain to find.
SOURCE: http://www.cygwin.com/faq.html#faq.using.fixing-fork-failures
and the rebase README file.
To add on to other answers here, we ran into the same issue but could not run the rebase command from the ash or dash shell. However, when launching the command from the Windows cmd shell, the following worked.
cmd /c "C:\cygwin64\bin\ash.exe /usr/rebaseall -v"
-v is to get verbose output
I found another information here :
http://cygwin.com/ml/cygwin/2014-02/msg00531.html
You have to delete the database at
/etc/rebase.db* and do in a "ash" windows :
peflags * -d 1
rebaseall
It works for me on 2 servers.
I solved this problem by restarting my computer. Probably installed a driver update and kept using sleep instead of shutting down.
Experienced the same issue when loading Cygwin with cygiconv-2.dll forking and not loading successfully in the Cygwin terminal, but after turning off my AntiVirus (it was specifically Ad-aware), the issue resolved, and Cygwin worked properly.
In case you are using babun's Cygwin, after rebaseall, try launching Cygwin by executing .babun\cygwin\cygwin.bat in a Windows command prompt or Windows explorer.
This works for me (while launching babun's default console - mintty results in fork error).
I had the error on win10 and i was trying to rebase to c: before install.
then i saw that the installer was installing it instead to c:/Users/myuser
so i was coping all files from c:/Users/myuser to c:.badun
and then restart plus open badun.bat
not shure if this was wise its now duplicated XD... but then it worked again.
Rebaseing didn't help in my case. In addition to what other people suggested, I noticed that reducing the length of PATH environment variable fixed the issue for me (and for other people as well as can be seen from this answer).
This issue is intermittent in nature & I found this issue when there is network is too slow to connect to remote machine on AWS.... I have Shell script that runs through Gitbash shell & it connects to AWS EC2 instance with ssh..... Most of the time, it ran correctly but 2 out 100 times it get into this issue bash: fork: retry: Resource temporarily unavailable .... Killing the MSYS2 terminal from task manager helps to overcome with this issue....
Negative side is you need to run the scripts from the beginning...
I had the same issue on Windows 10 and the mobaxterm app (which uses cygwin) and I tried all of answers listed here however for me, the solution was to simply delete the "CryptoPro CSP" application.
I started facing this problem after upgrading to windows 10. As of now I do not see that any of the above method working.
What I am noticing is that if you start cygwin with admin right (right click and say "run as admin") then it works fine.
Or you open cmd as administrator and then launch cygwin from there, then also it runs fine.
Just reinstall cygwin and select TCL and activate EXPECT