I'm trying to SSH into AKS windows node using this reference which created debugging Linux node, and ssh into the windows node from the debugging node. Once I enter the Linux node and try to SSH into the windows node, it asks me to type in azureuser password like below:
azureuser#10.240.0.128's password:
Permission denied, please try again.
What is azureuser#(windows node internal IP address)'s password? Is it my azure service password or is it a WindowsProfileAdminUserPassword that I pass in when I create an AKS cluster using New-AzAksCluster cmdlet? Or is it my ssh keypair password? If I do not know what it is, is there a way I can reset it? Or is there a way I can create a Windows node free from credentials? Any help is appreciated. Thanks ahead!
It looks like you're trying to login with your password, not your ssh key. Look for the explanation between those methods. These are two different authentication methods. If you want to ssh to your node, you need to chose ssh with key authentication. You can do this by running the command:
ssh -i <id_rsa> azureuser#<your.ip.adress>
But before this, you need to create key pair. It is well done described in this section. Then you can create the SSH connection to a Linux node. You have everything described in detail, step by step, in the documentation you provide.
When you configure everything correctly, you will be able to log into the node using the ssh key pair. You won't need a password. When you execute the command
ssh -i <id_rsa> azureuser#<your.ip.adress>
you should see an output like this:
The authenticity of host '10.240.0.67 (10.240.0.67)' can't be established.
ECDSA key fingerprint is SHA256:1234567890abcdefghijklmnopqrstuvwxyzABCDEFG.
Are you sure you want to continue connecting (yes/no)? yes
[...]
Microsoft Windows [Version 10.0.17763.1935]
(c) 2018 Microsoft Corporation. All rights reserved.
When you see Are you sure you want to continue connecting (yes/no)? you need to write yes and confirm using Enter.
Related
I am learning to use Jenkins to deploy a .Net 5.0 application on an AWS EC2 server. This is the first time I am using Linux server and Jenkins for .Net (I'm am a life long Windows guy), and I am facing an error while trying to publish my artifacts over SSH to Web Server.
My setup:
Jenkins server is an AWS EC2 Linux AMI server.
Web Server is also an AWS EC2 LInux AMI server.
My Jenkins is correctly installed and working. I am able to build and run unit test cases without any issues.
For Deploy, I am using 'Publish Over SSH' plugin, and I have followed all steps to configure this plugin as mentioned here https://plugins.jenkins.io/publish-over-ssh/.
However, when try to 'Test Configuration', I get the below error,
Failed to connect or change directory
jenkins.plugins.publish_over.BapPublisherException: Failed to connect and initialize SSH connection. Message: [Failed to connect session for config [WebServer]. Message [Auth fail]]
I did a ping test from Jenkins server to Web Server, and it is a success.
I'm using the .pem key in the 'Key' section of 'Publish over SSH'. This key is the same key I use to SSH into the web server.
The below link suggests many different solutions, but none is working in my case.
Jenkins Publish over ssh authentification failed with private key
I was looking at the below link which describes the same problem,
Jenkins publish over SSH failed to change to remote directory
However in my case I have kept 'Remote Directory' as empty. I don't know if I have to specify any directory here. Anyways, I tried creating a new directory under the home directory of user ec2-user as '/home/ec2-user/publish' and then used this path as Remote Directory, but it still didn't work.
Screenshot of my settings in Jenkins:
I would appreciate if anyone can point me to the right direction or highlight any mistake I'm doing with my configuration.
In my case following steps solved the problem.
Solution is based on Ubuntu 22.04
add two line in /etc/ssh/sshd_config
PubkeyAuthentication yes
PubkeyAcceptedKeyTypes +ssh-rsa
restart sshd service
sudo service sshd restart
you might consider the following:
a. From the screenshot you’ve provided, it seems that you have checked the Use password authentication, or use different key option which will require you to add your key and password (inputs from these fields will be used in connecting to your server via SSH connection). If you use the same SSH key and passphrase/password on all of your servers, you can uncheck/untick that box and just use the config you have specified above.
b. You might also check if port 22 of your web server allows inbound traffic from the security group where your Jenkins server/EC2 instance is running. See reference here.
c. Also, make sure that the remote directory you have specified is existing otherwise the connection may fail.
Here's the sample config
I have build an AMI in aws using
Ubuntu Server 16.04 LTS (HVM), SSD Volume Type - ami-0d77397e
Now I might be mis-understanding this, but I don't want to use a keypair as we are sharing this ami around a team. It is in a security group that is locked down to our IP's, so i just want to be able to log in using user/pass
When I try to connect I get the username prompt which I enter the user name Ubuntu in on pressing enter I get this prompt:
Disconnected: No supported authentication methods available (server sent: publickey)
Instead of sharing keys you can create unix users like
1) sudo adduser username -- It will ask you enter password and other details
2) Edit /etc/ssh/sshd_config setting
PasswordAuthentication yes
3) Restart the ssh daemon with
sudo service ssh restart
Now log back in by saying ssh username#ec2_ip and enter the password you just created in 1.
You should use key pairs (multiple, no need to share them), but if you really are resistant then you can enable password logins.
I used to connect to Amazon web services using ssh command and application.pem key. Now when I try to connect to other platforms such as Github my ssh client looks for same application.pem key and tries to connect to AWS. How do I connect to Github or change the default host and key configuration.I am using a Ubuntu 13.10 system and following is my ssh output.
pranav#pranav-SVF15318SNW:~/.ssh$ ssh
Warning: Identity file application.pem not accessible: No such file or directory.
You need the identity file to login to the box. Use the command:
ssh -i (identity_file) username#hostname"
This worked for me. Write just the filename (without any slashes), unlike Amazon EC2 tutorial which asks you to enter:
ssh -i /path/key_pair.pem ec2-user#public_dns_name
and also check the permission
I am getting below error while installing BigInsight in my Linux machine (RedHat 6.6). Kindly help me how to resolve this.
[ERROR] Prerequisite check - Failed to use given credentials to access nodes.Either provide root password during add node or make sure BI admin user exists on new nodes and passwordless ssh is setup from management node to new nodes that are being added. Please revisit Secure Shell page from installer UI or SSH section in response file to make sure all prerequisites are satisfied, then re-run the command.
Execute the following as root on the server and rerun
ssh-keygen -t rsa ( leave blanks at all prompts )
cat /root/.ssh/*.pub >> /root/.ssh/authorized_keys
then try root#localhost , this should not ask you for a password.
I've created a Ubuntu 12.04 virtual machine in Microsoft Windows Azure and set a password. When I use my SSH client to connect to it, I enter the password but the server refuses it and says I'm entering the wrong password. Anyone else experience this problem? Am I doing something wrong?
Thanks!
just make sure about a couple of points which I listed below,
you write your username correct when you connect to your
server, its usually "azureuser" by default
you type in your dns or your global ip correctly
that the status of your virtual machine is "running"
your ssh command looks like this "ssh -p 22
username#dns.cloudapp.net" , note this command is used when u don't
have public key set, but if you do have public key, use this "ssh -p
22 -i key.key username#dns.cloudapp.net" , since you said in your
question , you only set password, then the first ssh command is the
one you should use