I am trying to write a vlookup code that uses the lookups tab as the array (A:B) and the revenue tab where the vlookup is in cell Y2. I need it to fill all the way through column Y.
Sub VLOOKUP()
Dim LookupsLastRow As Long
Dim RevenueLastRow As Long
Dim LookupsSheet As Worksheet
Dim RevenueSheet As Worksheet
'What are the names of our worksheets?
Set LookupsSheet = Worksheets("Lookups")
Set RevenueSheet = Worksheets("Revenue")
'Determine last row of source
With LookupsSheet
LookupsLastRow = .Cells(.Rows.Count, "A").End(xlUp).Row
End With
With RevenueSheet
'Determine last row in col P
RevenueLastRow = .Cells(.Rows.Count, "X").End(xlUp).Row
'Apply our formula
.Range("Y2:Y" & RevenueLastRow).Formula = _
"=VLOOKUP(V2,"Lookups"!$A$2:$B$" & LookupsLastRow & ",2,0)"
End With
End Sub
Related
I've been wracking my brain to figure this out and I have a feeling that it's such an easy fix.
I have a formula that I need to apply to columns I to Z, and commencing row 3 until the last row of data in column C. I've managed to define what the "lastRow" is, but I cannot for the life of me work out how to apply the formula to columns I to Z.
Any help would be greatly appreciated! Thanks in advance :)
My VBA macro is below:
Sub Calculation()
Dim ws1 As Worksheet
Dim rng As Range
Dim lastRow As Long
Set ws1 = Sheets("Sheet 2")
With ws1
lastRow = .Range("C" & .Rows.Count).End(xlUp).Row
.Range("I3:I" & lastRow).Formula = "=1+2"
End With
End Sub
A small change in the Range
Sub Calculation()
Dim ws1 As Worksheet
Dim rng As Range
Dim lastRow As Long
Set ws1 = Sheets("Sheet 2")
With ws1
lastRow = .Range("C" & .Rows.Count).End(xlUp).Row
.Range("Z3:I" & lastRow).Formula = "=1+2"
End With
End Sub
Let's try and understand how Range works in VBA
The VBA Range Object represents a cell or multiple cells in your Excel worksheet.
A single cell : Range("A1")
A row : Range("1:1")
A column : Range("A: A")
For Contiguous Cells : Range("A1:C5")
For Non-Contiguous Cells : Range("A1:C5, F1:F5")
For Intersection of two ranges : Range("A1:C5 F1:F5")
(For intersection cell, remember there is no comma operator)
A pivot table has been created and I need a macro that can pick up the Pivot body data, with no filters, from a specified worksheet (Pivot1) and copy the results into another sheet (Selection) on the next blank cell.
I've used and modified the below, which I found on this site, however its not picking up my sheets and I get a runtime error '424'
Any ideas on how this can be executed?
Sub PastePivot()
Dim i As Long
Dim LR As Long
Dim j As Long
Dim c As Long
'Find last used row in Pivot1
LR = Pivot1.Cells(Pivot1.Rows.Count, 1).End(xlUp).Row
'Find last used row in Selection
j = Selection.Cells(Selection.Rows.Count, 1).End(xlUp).Row
'Loop through rows on Pivot1
For i = 3 To LR
'Decide whether to copy the row or not
If Pivot1.Cells(i, 1).Value <> "0" Then
'Update pointer to the next unused row in Selection
j = j + 1
'Only copy used columns, to stop it thinking every cell in the
'destination row is "used"
c = Pivot1.Cells(i, Pivot1.Columns.Count).End(xlToLeft).Column
'Copy the values (without using Copy/Paste via the clipboard)
Selection.Rows(j).Resize(1, c).Value = Pivot1.Rows(i).Resize(1, c).Value
End If
Next i
End Sub
If you want to get the body of a pivot table use it's DataBodyRange property.
The below code assumes you have 1 pivot table on 'Sheet1' and you want to copy it to 'Sheet2'.
Sub CopyPivotBody()
Dim ws As Worksheet
Dim pt As PivotTable
Dim rngBody As Range
Set ws = Sheets("Sheet1")
Set pt = ws.PivotTables(1)
Set rngBody = pt.DataBodyRange
rngBody.Copy Sheets("Sheet2").Range("A" & Rows.Count).End(xlUp).Offset(1)
End Sub
Note, if that doesn't give you the exact range you want you can offset/resize it like any other range.
(not in a range, not adjacent columns)
(in given order)
I have many rows on Sheet1. I would like to copy some columns of a row (not the entire row and not a range of columns) to Sheet2 (to the first empty row of Sheet2) if a cell satisfies a condition (the cell in the current row and A column has a value of y)
I would like to copy not the entire row from Sheet1 only the row with those columns that are given on Sheet3 (Column A), and the new column number (on Sheet2) is also given on Sheet3 (column B)
It would be simple if my task would be to copy the entire row, or the selected column would be in a range...but i would need to copy those columns that are specialized on Sheet3. I would be grateful for any help. Thanks in advance.
Sheet1 shows an example data sheet. The criteria is if Cells(Rows, 1).Value = "y"
Sheet2 shows the desired result.
Sheet3 shows the selected column number on Sheet1 and the new column number on Sheet2
Whilst this probably should be done using arrays more, here's some basic VBA code that loops the first sheet checking for "y" in the first column. When it finds it, it then loops the column mappings in the third sheet that have been saved into arrays to set the values on the second sheet:
Sub sTranasferData()
On Error GoTo E_Handle
Dim aOld() As Variant
Dim aNew() As Variant
Dim wsIn As Worksheet
Dim wsOut As Worksheet
Dim wsTrack As Worksheet
Dim lngLastRow As Long
Dim lngLoop1 As Long
Dim lngLoop2 As Long
Dim lngRow As Long
Dim lngTrack As Long
Set wsIn = Worksheets("Sheet1")
Set wsOut = Worksheets("Sheet2")
Set wsTrack = Worksheets("Sheet3")
lngLastRow = wsIn.Cells(wsIn.Rows.Count, "A").End(xlUp).Row
lngTrack = wsTrack.Cells(wsTrack.Rows.Count, "A").End(xlUp).Row
aOld() = wsTrack.Range("A2:A" & lngTrack).Value
aNew() = wsTrack.Range("B2:B" & lngTrack).Value
lngRow = 1
For lngLoop1 = 2 To lngLastRow
If wsIn.Cells(lngLoop1, 1) = "y" Then
For lngLoop2 = LBound(aOld) To UBound(aOld)
wsOut.Cells(lngRow, aNew(lngLoop2, 1)) = wsIn.Cells(lngLoop1, aOld(lngLoop2, 1))
Next lngLoop2
lngRow = lngRow + 1
End If
Next lngLoop1
sExit:
On Error Resume Next
Set wsIn = Nothing
Set wsOut = Nothing
Set wsTrack = Nothing
Exit Sub
E_Handle:
MsgBox Err.Description & vbCrLf & vbCrLf & "sTransferData", vbOKOnly + vbCritical, "Error: " & Err.Number
Resume sExit
End Sub
Regards,
I have two questions
How to combine data using two of the cells from workbookA and copy to workbookB on the same cell?
How do I start using for loop to copy it until the last row/column?
I have no clue on how to combine the data and I do not know where to place the variable inside the code for it to loop until its last column.
Dim Tlastrow As Integer
Tlastrow = Cells(1, Columns.Count).End(xlToLeft).Column
For r = 1 To Tlastrow
Workbooks("InputB.xls").Worksheets("HC_MODULAR_BOARD_20180112").Range("F3:G3").Copy _
Workbooks("Output.xls").Worksheets("Sheet1").Range("I3")
Next
Try this:
Option Explicit
Sub Paste()
Dim wsInput As Worksheet, wsOutput As Worksheet, LastRow As Long, C As Range
Set wsInput = Workbooks("InputB.xls").Worksheets("HC_MODULAR_BOARD_20180112")
Set wsOutput = Workbooks("Output.xls").Worksheets("Sheet1")
With wsInput
LastRow = .Cells(.Rows.Count, "E").End(xlUp).Row 'Last Row with data
For Each C In .Range("F3:F" & LastRow) 'loop for every row with data
wsOutput.Cells(C.Row, "I").Value = C & " " & C.Offset(0, 1)
Next C
End With
End Sub
This code is assuming you want to paste every row from your input workbook to the output workbook on the same rows, but merging F and G columns. It's just pasting the values, not formulas or formats.
I realize there are a few different similar ideas on here. But I need help with this simple compare function.
My goal is to compare two different cells and if they are the same, replace it with its full non-abbreviated name.
Thank you for your time!!!
I.E
Sheet1 Sheet2
Column H Column A Column B
Dept Dept Department
This is what I have (Yes simple), but the cell H is not updating to the non-abbreviation:
Sub updateDeptNames()
'Format user ID from the email column
Dim ws As Worksheet, ws2 As Worksheet
Dim LastRow As Long, i As Long
Dim tmpArray() As String, tempDept As String
Set ws = ActiveWorkbook.Sheets("Student_Travel_DB") '--> This is the relevant sheet
Set ws2 = ActiveWorkbook.Sheets("gokoutd") '--> This is the relevant sheet
LastRow = 1000 ''Bug finding the last row, had to hard code it
For i = 2 To LastRow 'Iterate through all the rows in the sheet
For j = 2 To 112
tempDept = ws2.Range("A" & j).Value
If ws.Range("H" & i).Value = tempDept Then
ws.Range("H" & i) = ws2.Range("B" & j).Value
End If
Next j
Next i
End Sub
You can more easily use VLOOKUP either on your worksheet or with VBA:
Sub GetFullName()
Dim cl As Range, data As Range, lookUpRng As Range
Set data = Worksheets("Student_Travel_DB").Range("A1:A10")
Set lookUpRng = Worksheets("gokoutd").Range("A1:B10")
On Error Resume Next
For Each cl In data
cl = WorksheetFunction.VLookup(cl, lookUpRng, 2, False)
Next cl
End Sub
You'll need to change your range references.