I have a servicereference with a method I need to use in a test.
The servicereference class is defined as:
public class MyServiceReference : Clientbase<IMyServiceReference>, IMyServiceReference
{
public MyServiceReference()
{
}
..... methods is then defined
}
From my testmethod I have tried both
private MyServiceReference myServiceReferenceFake = A.Fake<MyServiceReference>();
// And
private MyServiceReference myServiceReference = new MyServiceReference();
For both of these is crashes in the constructor with the message:
System.InvalidOperationException: Could not find default endpoint element that references contract.
All I need is to have a callto definition from a method in that class.
How can this be solved?
I've no experience with Clientbase, which I assume to be a System.ServiceModel.ClientBase<TChannel>,but I can make some general comments.
Since you tried first to fake a MyServiceReference, I'll assume that you're not testing that class, and you want to use it as a collaborator for the system under test. In that case, your best bet is to try faking IMyServiceReference. interfaces are very easy to fake, since they don't bring along any behaviour or baggage like faking a class does.
If you feel you really need to fake a MyServiceReference, then we have to contend with the fact that FakeItEasy will eventually call MyServiceReference(), which will call ClientBase<IMyServiceReference>(), whose documentation says
Initializes a new instance of the ClientBase<TChannel> class using the default target endpoint from the application configuration file.
Based on the error you reported, I assume that the application configuration file is not found or does not include the configuration required to create a MyServiceReference. The fact that you get the same error when you just try to instantiate a MyServiceReference directly strengthens my belief.
So I think your paths forward are either to try faking IMyServiceReference or to provide the configuration that ClientBase<IMyServiceReference> needs.
Related
What I need: a class with two parents, which are ContextBoundObject and another class.
Why: I need to access the ContextBoundOject to log the method calls.
Composition works? As of now, no (types are not recognized, among other things).
Are other ways to do this? Yes, but not so automatable and without third-party components (maybe a T4 could do, but I'm no expert).
A more detailed explanation.
I need to extend System classes (some of which have already MarshalByRefObject (which is the parent of ContextBoundObject) for parent, for example ServiceBase and FileSystemWatcher, and some not, for example Exception and Timer) to access some inner workings of the framework, so I can log method calls (for now; in future it may change).
If I use this way I only have to add a class name to the object I want to log, instead of adding the logging calls to every method, but obviously I can't do this:
public class MyService:ServiceBase,ContextBoundObject,IDisposable{
public MyService(){}
public Dispose(){}
}
so one could try the usual solution, interfaces, but then if I call Run as in:
ServiceBase.Run(new MyService());
using a hypotethical interface IServiceBase it wouldn't work, because the type ServiceBase is not castable to IServiceBase -- it doesn't inherit from any interface. The problem is even worse with exceptions: throw only accepts a type descending from Exception.
The reverse, producing a IContextBoundObject interface, doesn't seem to work either: the logging mechanism doesn't work by methods, so I don't need to implement any, just an attribute and some small internal classes (and inheriting from ContextBoundObject, not even from MarshalByRefObject, which the metadata present as practically the same).
From what I see, extending from ContextBoundObject puts the extended class in a Proxy (probably because in this way the method calls use SyncProcessMessage(IMessage) and so can be intercepted and logged), maybe there's a way to do it without inheritance, or maybe there could be pre or post compiling techniques available for surrounding methods with logging calls (like T4 Text Templates), I don't know.
If someone wants to give this a look, I used a customized version of MSTestExtentions in my program to do the logging (of the method calls).
Any ideas are appreciated. There could be the need for more explanations, just ask.
Logging method calls is usually done using attributes to annotate classes or methods for which you want to have logging enabled. This is called Aspect Oriented Programming.
For this to work, you need a software that understands those attributes and post-processes your assembly by adding the necessary code to the methods / classes that have been annotated.
For C# there exists PostSharp. See here for an introduction.
Experimenting with proxies I found a way that apparently logs explicit calls.
Essentially I create a RealProxy like in example in the msdn, then obtain the TransparentProxy and use that as the normal object.
The logging is done in the Invoke method overridden in the customized RealProxy class.
static void Main(){
...
var ServiceClassProxy=new ServiceRealProxy(typeof(AServiceBaseClass),new object[]{/*args*/});
aServiceInstance=(AServiceBaseClass)ServiceClassProxy.GetTransparentProxy();
ServiceBase.Run(aServiceInstance);
...
}
In the proxy class the Invoke will be done like this:
class ServiceRealProxy:RealProxy{
...
[SecurityPermissionAttribute(SecurityAction.LinkDemand, Flags=SecurityPermissionFlag.Infrastructure)]
public override IMessage Invoke(IMessage myIMessage){
// remember to set the "__Uri" property you get in the constructor
...
/* logging before */
myReturnMessage = ChannelServices.SyncDispatchMessage(myIMessage);
/* logging after */
...
return myReturnMessage;
// it could be useful making a switch for all the derived types from IMessage; I see 18 of them, from
// System.Runtime.Remoting.Messaging.ConstructionCall
// ... to
// System.Runtime.Remoting.Messaging.TransitionCall
}
...
}
I have still to investigate extensively, but the logging happened. This isn't an answer to my original problem because I have still to test this on classes that don't inherit from MarshalByRefObject.
I think i understood how CDI works and in order to dive deep in it, i would like to try using it with something real world example. I am stuck with one thing where i need your help to make me understand. I would really appreciate your help in this regard.
I have my own workflow framework developed using Java reflection API and XML configurations where based on specific type of "source" and "eventName" i load appropriate Module class and invoke "process" method on that. Everything is working fine in our project.
I got excited with CDI feature and wanted to give it try with workflow framework where i am planning inject Module class instead of loading them using Reflection etc...
Just to give you an idea, I will try to keep things simple here.
"Message.java" is a kind of Transfer Object which carries "Source" and "eventName", so that we can load module appropriately.
public class Message{
private String source;
private String eventName;
}
Module configurations are as below
<modules>
<module>
<source>A</source>
<eventName>validate</eventName>
<moduleClass>ValidatorModule</moduleClass>
</module>
<module>
<source>B</source>
<eventName>generate</eventName>
<moduleClass>GeneratorModule</moduleClass>
</module>
</modules>
ModuleLoader.java
public class ModuleLoader {
public void loadAndProcess(Message message){
String source=message.getSource();
String eventName=message.getEventName();
//Load Module based on above values.
}
}
Question
Now , if i want to implement same via CDI to inject me a Module (in ModuleLoader class), I can write Factory class with #Produce method , which can do that. BUT my question is,
a) how can pass Message Object to #Produce method to do lookup based on eventName and source ?
Can you please provide me suggestions ?
Thanks in advance.
This one is a little tricky because CDI doesn't work the same way as your custom solution (if I understand it correctly). CDI must have all the list of dependencies and resolutions for those dependencies at boot time, where your solution sounds like it finds everything at runtime where things may change. That being said there are a couple of things you could try.
You could try injecting an InjectionPoint as a parameter to a producer method and returning the correct object, or creating the correct type.
There's also creating your own extension of doing this and creating dependencies and wiring them all up in the extension (take a look at ProcessInjectionTarget, ProcessAnnotatedType, and 'AfterBeanDiscovery` events. These two quickstarts may also help get some ideas going.
I think you may be going down the wrong path regarding a producer. Instead it more than likely would be much better to use an observer especially based on what you've described.
I'm making the assumption that the "Message" transfer object is used abstractly like a system wide event where basically you fire the event and you would like some handler defined in your XML framework you've created to determine the correct manager for the event, instantiate it (if need be), and then call the class passing it the event.
#ApplicationScoped
public class MyMessageObserver {
public void handleMessageEvent(#Observes Message message) {
//Load Module based on above values and process the event
}
}
Now let's assume you want to utilize your original interface (I'll guess it looks like):
public interface IMessageHandler {
public void handleMessage(final Message message);
}
#ApplicationScoped
public class EventMessageHandler implements IMessageHandler {
#Inject
private Event<Message> messageEvent;
public void handleMessage(Message message) {
messageEvent.fire(message);
}
}
Then in any legacy class you want to use it:
#Inject
IMessageHandler handler;
This will allow you to do everything you've described.
May be you need somthing like that:
You need the qualifier. Annotation like #Module, which will take two paramters source and eventName; They should be non qualifier values. See docs.
Second you need a producer:
#Produces
#Module
public Module makeAmodule(InjectionPoint ip) {
// load the module, take source and eventName from ip
}
Inject at proper place like that:
#Inject
#Module(source="A", eventName="validate")
Module modulA;
There is only one issue with that solution, those modules must be dependent scope, otherwise system will inject same module regardles of source and eventName.
If you want to use scopes, then you need make source and eventName qualified parameters and:
make an extension for CDI, register programmatically producers
or make producer method for each and every possible combinations of source and eventName (I do not think it is nice)
I am very new to concept of IOC and I understand the fact that they help us resolve different classes in different contexts. Your calling class will just interact with Interface and Interface with decide which implementation to give you and it takes care of newing up the object.
Please do correct me if I am understanding is wrong because my question is based on that:
Now, I see this pattern very often in these projects:
private readonly IEmailService emailService;
private readonly ITemplateRenderer templateRenderer;
private readonly IHtmlToTextTransformer htmlToTextTransformer;
public TemplateEmailService(IEmailService emailService,
ITemplateRenderer templateRenderer,
IHtmlToTextTransformer htmlToTextTransformer)
{
this.emailService = emailService;
this.htmlToTextTransformer = htmlToTextTransformer;
this.templateRenderer = templateRenderer;
}
I understand that this helps using all the implementations of these classes without newing them up and also you don't have to decide WHICH implementaion to get, your IOC decides it for you, right?
but when I code like this, I do not even touch any IOC congiguration files. And again I am usin git for 2 days only but from all the tutorials that I have read, I was expecting my self to configure something which says "Resolve IParent to Child" class. But it works without me doing anything like it. Is it because there is only one implementaion of these interfaces? and If I do have more than one implementations then and then only I will have to configure resolved explicitly?
The code sample you have is a case of Constructor Injection.
In a traditional code, you would have a parameterless constructor, and in it you would "new-up" your objects like this:
IEmailService emailService = new EmailService();
So your code is explictly controlling which implementation gets assigned to the interface variable.
In IoC using constructor injection, control is inverted, meaning the container is "driving the bus" and is creating your TemplateEmailService object. When it is about to create it, the container looks at your constructor parameters (IEmailService , ITemplateRenderer , etc.) and feeds those objects to your class for use.
The IoC container can be configured so that interface A gets fulfilled by implementation B (or C) explicitly. Each one has a way to do it. Or it could do it by convention (IFoo fulfilled by Foo), or even attributes in classes, whatever.
So to answer your question-- you can explicitly define which implementations get used to fulfill certain interfaces. Got to read the IoC container docs for how to.
One more thing - "when you code like this", you technically don't have to be using an IoC container. In fact, your class should not have a direct reference to the container - it will maximize the reusability, and also allow easy testing. So you would wire-up interfaces to implementation classes elsewhere.
I have a question that keeps bothering me. Currently, I have started using Kohana 3.2 Framework. I've written a helper to handle some functionality - I have a number of methods, which are (as it should be) declared STATIC. But, all of these methods are somehow working with the database, so I need to load a model. Currently, every method has a non-static variable like this:
$comment = new Model_Comments;
$comment->addComment("abc");
OK, it seems to be working, but then I wanted to get rid of this redundancy by using class attribute to hold the instance of the model (with is class as well).
Something like this:
private static $comment; // Declaring attribute
self::$comment = new Model_Comment; // This is done within helper __constuct method
self::$comment->addComment("abc"); // And call it within the method.
But, I got failed with: Call to a member function addComment() on a non-object
Question is: is it possible to do it ? Maybe there are some other approaches ?
Sorry for a long story and, thanks in advice! :P
A static method cannot call a non-static method without operating on an instance of the class. So, what you're proposing won't work. There may be a way do accomplish something similar, but what about trying the following:
You could implement the singleton or factory pattern for your "helper" class. Then, you could create the model (as an attribute) as you instantiate/return the instance. With an actual instance of your "helper" class, you won't have to worry about the static scope issues.
In other words, you can create a helper-like class as a "normal" class in your application that, upon creation, always has the necessary model available.
I'd be happy to help further if this approach makes sense.
David
I have a custom type converter that converts UTC DateTime properties to a company's local time (talked about here: Globally apply value resolver with AutoMapper).
I'd now like to only have this converter do its thing if the property on the view model is tagged with a custom DisplayInLocalTime attribute.
Inside the type converter, if I implement the raw ITypeConvert<TSource, TDestination> interface, I can check if the destination view model property being converted has the attribute:
public class LocalizedDateTimeConverter : ITypeConverter<DateTime, DateTime>
{
public DateTime Convert(ResolutionContext context)
{
var shouldConvert = context.Parent.DestinationType
.GetProperty(context.MemberName)
.GetCustomAttributes(false)[0].GetType() == typeof(DisplayInLocalTimeAttribute);
if (shouldConvert) {
// rest of the conversion logic...
}
}
}
So this code works just fine (obviously there's more error checking and variables in there for readability).
My questions:
Is this the correct way to go about this? I haven't found anything Googling around or spelunking through the AutoMapper code base.
How would I unit test this? I can set the parent destination type on the ResolutionContext being passed in with a bit of funkiness, but can't set the member name as all implementors of IMemberAccessor are internal to AutoMapper. This, and the fact that it's super ugly to setup, makes me this isn't really supported or I'm going about it all wrong.
I'm using the latest TeamCity build of AutoMapper, BTW.
Don't unit test this, use an integration test. Just write a mapping test that actually calls AutoMapper, verifying that whatever use case this type converter is there to support works from the outside.
As a general rule, unit tests on extension points of someone else's API don't have as much value to me. Instead, I try to go through the front door and make sure that I've configured the extension point correctly as well.