I'm looking for a way to count only the cell where based on the cell's date value it will check if the rest of the cells' values in the same row is 0 and will return the count.
So in the picture (cell: I2) I'm trying to return the count of those only who joined say within 2019 (A2:A12) and didn't receive any induction.
Desired answer
Where column A is the join date and Columns B through G are the possible introduction dates, you can just use IF with logical tests, drag the formula down, and then count the instances with SUM.
Try:
=IF(AND($A2>=1/1/2018, $A2<=12/31/2018, CONCAT($B2:$G2)=""), 1, "")
Related
I want to lookup a specific date from cell E2 within a list of dates (column A) and return the corresponding value in column B from the matching date values IF column D does not equal "NA". I want the column of revised dates (RevDate column) to coincide with the specific Q measurement when the tss data was <> "NA". This will give me the specific Q value when tss was measured on a specific date.
Formulas I have tried in Excel:
=IF(D2<>"NA",VLOOKUP(E2,$A$2:$D$445196,4,FALSE),0)
=IF(VLOOKUP(E2,A$2:D$445196,2,FALSE)="NA","",)
I feel I am close.... maybe????
If you are going to have per date in A column just a single value in column D that is not NA(as per your sample), then you can use FILTER. VLOKUP will return the first match, and this is not what you want.
=FILTER($B$2:$B$445196, ($D$2:$D$445196<>"NA") * ($A$2:$A$445196=E2))
In case FILTER returns multiple rows, you would need to concatenate the result as follow:
=TEXTJOIN(",",,FILTER($B$2:$B$445196, ($D$2:$D$445196<>"NA")
* ($A$2:$A$445196=E2), "Not Found"))
Added also not found condition (if not it returns #N/A), that covers the case of 10/3/2010 for example. You can replace with an empty string as per in your second formula.
I have five columns in Excel and I want to return the maximum value's column heading name. However, there are cases where the max values are repeated more than once for the same row. So, I am trying to return both column names.
The green values are the min and red are the max. In row 4, it is clearly there is more than one Max with same value, I would like to return B and E in the stream cell.
I tried this formula in Excel using the index:
=IF(ISNUMBER(A6),INDEX($B$5:$F$5,1,MATCH(L6,B6:F6,0)),"")
MATCH returns the first match, so I think you need something gross like the following (I started with the first column and row, but you can shift the column numbers -- the rows are designed to be draggable)
=IF(ISNUMBER(F2),IF(F2=A2,$A$1,"")&IF(F2=B2,$B$1,"")&IF(F2=C2,$C$1,"")&IF(F2=D2,$D$1,"")&IF(F2=E2,$E$1,""))
You can use FILTER() to return multiple values. In this example, I've concatenated them with TEXTJOIN():
In cell E2 enter the formula =MAX(A2:D2). In cell F2 enter =TEXTJOIN(,,FILTER(A$1:D$1,A2:D2=E2)). Copy down.
want to write excel formula that will sum the values based on a match of the rows. The cells to be matched can occur multiple times and basing on the Mapping legend they should return the sum of values.
In the yellow cells I am trying to calculate sum of values in range B9:B21 based on a match of the names in G3:G8 according to Mapping legend to Item1, then Item2 and Item 3. Also I want to consider the sum to be done across Date 1, Date 2 and Date 3. The SumProduct formula below works only
if I use it on sum array for a single date but not across date1 , date2 and date 3:
Does sombody know how to fix this?
I would like to add that I want to have the fomrula to be identical in each yellow cell without splitting the arrays across the dates. The more, it is important in the formula to have it on the basis that 'date 1', 'date2' and 'date3' are matched.
Put this array formula into B2 with CSE then fill right and down.
=SUM(SUMIFS(INDEX($B$8:$D$19, 0, MATCH(B$1, $B$7:$D$7, 0)), $A$8:$A$19, IF($F$2:$F$7=$A2, $G$2:$G$7)))
I am very new in Excel and I have to implement this pretty complex task (at least for me it is complex).
I put what I am doing here: https://drive.google.com/open?id=1sWHbyl-Y-GgSiX7JJ3bJ9_y8DUts-E0e
I will try to explain exactly what I have to do:
For each rows I have to "calculate" the value of the L column in this way.
Each cell into the L column is "calculated" using the following steps:
Considers the date into the H column of this row.
Search the nearest date in the past into the A column to select a specific row.
Take the E column value of this row and use it to populate the current L cell.
So doing a practical example, I want to populate the L3 cell, I have to do:
Considers the date into the H column of this row: so I obtain the value of the H3 row that is this date: 16/12/2017.
Then, into the whole A column I search the nearest date in the past in this column (in this case it is 15/12/2017), so I select the row number 4.
Take the value of E4 cell value (598,05 €) and write it into my L3 cell.
How can I do something like this?
Thank you
This is a simple INDEX(...,MATCH()) situation.
=INDEX(E:E,MATCH(H3,A:A,1))
This will return the value in column E such that the date in column A is the greatest date less than or equal to the value in H3.
Note: This assumes the dates in column A are sorted in ascending order.
VLOOKUP:
=VLOOKUP(H3,A:E,5,TRUE)
This requires the dates in Column A to be sorted.
I have a worksheet and I'm trying to do a simple Count function, probably a countif but I'm unsure how to go about writing the formula.
I have two columns that I'd like to use for this formula.
Column N - I would like to filter for the Criteria of "C" or anytime a cell has a value of C
Column 0 - This column has dates filled in (short date format).
I would like to get a count of every C for each month, as simple as that.
In this example I filtered the date for May of 2017 and filtered for C under the Check column. We can see that there are 12 instances of C showing in the month of May 2017.
Does anyone know how to structure a formula that I would be able to Count the Number of C's for every month into the foreseeable future?
I figured out how to count the total present in a date range but unsure of how to add the date range plus Column N (Check) every time "C" is present in the cell.
=SUMPRODUCT((O:O>=DATEVALUE("5/1/2017"))*(O:O<=DATEVALUE("5/31/2017")))
Try this
=COUNTIFS(O1:O100,">="&A1,O1:O100,"<"&B1,N1:N100,"C")
Where A1 has the start date and B1 has the end date for that month. You can use DATEVALUE() instead of A1 and B1. Change as applicable
Screenshot
If you want to use SUMPRODUCT then see this
=SUMPRODUCT((O:O>=DATEVALUE("1/5/2017"))*(O:O<=DATEVALUE("30/5/2017"))*(N:N="C"))
In another column (lets say 'P' for example) I would insert a formula to give you the month number =Month(P7) - this will return 5 for May.
I would then use COUNTIFS (Like COUNTIF but it uses multiple criteria) to count where column N contains 'C' and column 'P' contains '5'.
=COUNTIFS(N:N,"C",P:P,5)
Try this....you need to select the entire Column B and named the column as 'Date'.enter image description here