This question already has answers here:
Insert newline (\n) using sed
(4 answers)
Insert contents of a file after specific pattern match
(1 answer)
Closed 1 year ago.
I would like to insert the contents of one text file (with newlines) into another at a predetermined location (after some string):
I tried the following:
the base file:
cat base
ONE
TWO
THREE
the extension:
cat ext
100
200
300
400
500
600
700
800
900
A00
B00
C00
D00
and the script I tried:
#!/bin/bash
ext=$(<ext)
sed -i "s/TWO/TWO\n$ext/" base
which gives me sed: -e expression #1, char 14: unterminated `s' command
If you want to edit a file directly, I always suggest ed instead of the non-standard sed -i (Where different implementions of sed that do support it act differently, a common source of questions here):
printf "%s\n" "/TWO/r ext" w | ed -s base
will insert the contents of file ext after the first line containing TWO in base, and then write the new version of base back to disk.
If you must use sed, the proper invocation will look very similar (No surprise since they're sibling commands):
sed -i '/TWO/r ext' base
(This will insert the ext file after every TWO in base, though, not just the first.)
The key in both is the r command, which reads the contents of the given file and inserts it after a line with the matching address. Works a lot better than trying to read the file contents into a variable and including the text directly in the ed/sed commands.
If you want to insert the contents of a variable after the line, you can use
printf "%s\n" "/TWO/a" "$ext" . w | ed -s base
(As long as the variable doesn't have a line with just a period)
or with GNU sed
sed -i "/TWO/a ${ext//$'\n'/\\\n}" base
to append text after the addressed line.
While the answer given by Shawn shows a possible solution, it does not explain why your attempt did not work.
Note that your variable ext contains line feed characters. Hence, sed sees here a physical line feed. You would get the same error message when typing on the command line (in two lines):
sed -i "s/TWO/TWO\nfoo
/" base
This might work for you (GNU sed):
sed -e '0,/TWO/{/TWO/r extFile' -e '}' baseFile
This will place the file extFile after the first occurrence of the string TWO. The -i option may be used to amend the file in place.
An alternative solution:
sed -e '/TWO/!b;r extFile' -e ':a;n;ba' baseFile
N.B. The use of the -e option to split the commands after the r filename command. The r must be followed by a newline and the -e simulates this on a single line.
If you want to insert the file after each occurrence of the string TWO, then just use (as Shawn has already explained):
sed '/TWO/r extFile' baseFile
Related
This question already has answers here:
Using different delimiters in sed commands and range addresses
(3 answers)
Closed 6 years ago.
I'm trying to replace text in a file with the output of another command. Unfortunately, the outputted text contains characters bash expands. For example, I'm running the following script to change the file (somestring references output that would break the sed command):
#!/bin/bash
somestring='$6$sPnfj/lnXwZVrec7$fCnL9uy1oWIMZduInKTHBAxhsQxGCsBpm2XfVFFqDPHKidrd93yfjbYvKgYexXHVcvkKdu9lbfy16Ek5GvKy/1'
sed '0,/^title/s/^title*/'"$somestring"'\n&/' $HOME/example.txt
sed fails with this error:
sed: -e expression #1, char 30: unknown option to `s'
I think bash is substuting the contents of $somestring when building the sed command, but is then trying to expand the resulting text. I can't put the entire sed script in single quotes, I need bash to expand it the first time, just not the second. Any suggestions? Thanks
here the forward slash / is the problem. If it's the only issue you can set sed to use a different delimiter.
for example
$ somestring="abc/def"; echo xxx | sed 's/xxx/'"$somestring"'/'
sed: -e expression #1, char 11: unknown option to `s'
$ somestring="abc/def"; echo xxx | sed 's_xxx_'"$somestring"'_'
abc/def
you also need to worry about & and \ chars and escape them if can appear in the replacement text.
If you can't control the the replacement string, either you have to sanitize with another sed script or, alternatively use r command to read it from a file. For example,
$ seq 5 | sed -e '/3/{r replace' -e 'd}'
1
2
3slashes///1ampersand&and2backslashes\\end
4
5
where
$ cat replace
3slashes///1ampersand&and2backslashes\\end
You have several errors here:
the string somestring has characters that are significative for sed command (the most important being '/' that you are using as a delimiter) You can escape it, by substituting it with a previous
somestring=$(echo "$somestring" | sed -e 's/\//\\\//g')
that will convert your / chars to \/ sequences.
you are using sed '0,/^title/s/^title*/'"$somestring"'\n&/' $HOME/example.txt which is looking to substitute the string titl followed by any number of e characters by that $somestring value, followed by a new line and the original one. Unfortunately, sed(1) doesn't allow you to use newline characters in the pattern substitution side of the s command, but you can afford the result by using the i command with a text consisting of you pattern (preceding any new line by a \ to interpret it as literal):
Finally the script leads to:
#!/bin/bash
somestring='$6$sPnfj/lnXwZVrec7$fCnL9uy1oWIMZduInKTHBAxhsQxGCsBpm2XfVFFqDPHKidrd93yfjbYvKgYexXHVcvkKdu9lbfy16Ek5GvKy/1'
somestring=$(echo "$somestring" | sed -e 's/\//\\\//g')
sed '/^title/i\
'"$somestring\\
" $HOME/example.txt
If your shell is Bash, you can use parameter substitution to replace the problematic /:
somestring="{somestring//\//\\/}"
That looks scary, but is easier to understand if you look at the version that replaces x with __:
somestring="${somestring//x/__}"
It might be easier to use (say) underscore as the delimiter for your sed s command, and then the substitution above would be
somestring="${somestring//_/\\_}"
If you already have backslashes, you'll need to first replace those:
somestring="${somestring//\\/\\\\}"
somestring="{somestring//\//\\/}"
If there were other characters that needed escaping (e.g. on the search side of s///), then you could extend the above appropriately.
This URL provides the cleanest answer:
Command to escape a string in bash
printf "%q" "$someVariable"
will escape any characters you need escaped for you.
I want to insert word after nth line after pattern using sed.
I tied to modify this command but it inserts only in first line after pattern.
sed -i '/myPattern/a \ LineIWantToinser ' myFile
What command should I use to insert for example in third line after pattern?
Easiest way to do it with GNU sed is.. (maybe some direct solution exists!?)
sed -n '/pattern/=' file
to see line where pattern is (grep also can be used here with -n)
then if linenumber+ numoflines is for example 123
sed '123aSOME INSERTED TEXT AFTER THAT LINE' file
where little a is append command (after that line, if i is used will be pre pattern line)
ps. I'm eager to see if #neronlevelu (or other sed Lover) will find some better sed solution.
Edit: i've found it, it seems a for append or i for insert must? be on first position on line when using { with ; inside } like
sed '/pattern/{N;N;N;
a SOME TEXT FOR INSERTING
}' file
sed '/pattern/{N;N;N;i \
Line to add after 3 lines with patterne as starting counter
' YourFile
number of N to add line between pattern and inserted line.
there is no check for end of file or pattern in the 3 lines. (not specified in PO)
A version with bash and ed:
ed -s myFile <<<$'/myPattern/+3a\n LineIWantToinser \n.\nwq'
ed enables us to use the line addressing /myPattern/+3.
Say I have some arbitrary multi-line text file:
sometext
moretext
lastline
How can I remove only the last character (the e, not the newline or null) of the file without making the text file invalid?
A simpler approach (outputs to stdout, doesn't update the input file):
sed '$ s/.$//' somefile
$ is a Sed address that matches the last input line only, thus causing the following function call (s/.$//) to be executed on the last line only.
s/.$// replaces the last character on the (in this case last) line with an empty string; i.e., effectively removes the last char. (before the newline) on the line.
. matches any character on the line, and following it with $ anchors the match to the end of the line; note how the use of $ in this regular expression is conceptually related, but technically distinct from the previous use of $ as a Sed address.
Example with stdin input (assumes Bash, Ksh, or Zsh):
$ sed '$ s/.$//' <<< $'line one\nline two'
line one
line tw
To update the input file too (do not use if the input file is a symlink):
sed -i '$ s/.$//' somefile
Note:
On macOS, you'd have to use -i '' instead of just -i; for an overview of the pitfalls associated with -i, see the bottom half of this answer.
If you need to process very large input files and/or performance / disk usage are a concern and you're using GNU utilities (Linux), see ImHere's helpful answer.
truncate
truncate -s-1 file
Removes one (-1) character from the end of the same file. Exactly as a >> will append to the same file.
The problem with this approach is that it doesn't retain a trailing newline if it existed.
The solution is:
if [ -n "$(tail -c1 file)" ] # if the file has not a trailing new line.
then
truncate -s-1 file # remove one char as the question request.
else
truncate -s-2 file # remove the last two characters
echo "" >> file # add the trailing new line back
fi
This works because tail takes the last byte (not char).
It takes almost no time even with big files.
Why not sed
The problem with a sed solution like sed '$ s/.$//' file is that it reads the whole file first (taking a long time with large files), then you need a temporary file (of the same size as the original):
sed '$ s/.$//' file > tempfile
rm file; mv tempfile file
And then move the tempfile to replace the file.
Here's another using ex, which I find not as cryptic as the sed solution:
printf '%s\n' '$' 's/.$//' wq | ex somefile
The $ goes to the last line, the s deletes the last character, and wq is the well known (to vi users) write+quit.
After a whole bunch of playing around with different strategies (and avoiding sed -i or perl), the best way i found to do this was with:
sed '$! { P; D; }; s/.$//' somefile
If the goal is to remove the last character in the last line, this awk should do:
awk '{a[NR]=$0} END {for (i=1;i<NR;i++) print a[i];sub(/.$/,"",a[NR]);print a[NR]}' file
sometext
moretext
lastlin
It store all data into an array, then print it out and change last line.
Just a remark: sed will temporarily remove the file.
So if you are tailing the file, you'll get a "No such file or directory" warning until you reissue the tail command.
EDITED ANSWER
I created a script and put your text inside on my Desktop. this test file is saved as "old_file.txt"
sometext
moretext
lastline
Afterwards I wrote a small script to take the old file and eliminate the last character in the last line
#!/bin/bash
no_of_new_line_characters=`wc '/root/Desktop/old_file.txt'|cut -d ' ' -f2`
let "no_of_lines=no_of_new_line_characters+1"
sed -n 1,"$no_of_new_line_characters"p '/root/Desktop/old_file.txt' > '/root/Desktop/my_new_file'
sed -n "$no_of_lines","$no_of_lines"p '/root/Desktop/old_file.txt'|sed 's/.$//g' >> '/root/Desktop/my_new_file'
opening the new_file I created, showed the output as follows:
sometext
moretext
lastlin
I apologize for my previous answer (wasn't reading carefully)
sed 's/.$//' filename | tee newFilename
This should do your job.
A couple perl solutions, for comparison/reference:
(echo 1a; echo 2b) | perl -e '$_=join("",<>); s/.$//; print'
(echo 1a; echo 2b) | perl -e 'while(<>){ if(eof) {s/.$//}; print }'
I find the first read-whole-file-into-memory approach can be generally quite useful (less so for this particular problem). You can now do regex's which span multiple lines, for example to combine every 3 lines of a certain format into 1 summary line.
For this problem, truncate would be faster and the sed version is shorter to type. Note that truncate requires a file to operate on, not a stream. Normally I find sed to lack the power of perl and I much prefer the extended-regex / perl-regex syntax. But this problem has a nice sed solution.
I have a text file which has a particular line something like
sometext sometext sometext TEXT_TO_BE_REPLACED sometext sometext sometext
I need to replace the whole line above with
This line is removed by the admin.
The search keyword is TEXT_TO_BE_REPLACED
I need to write a shell script for this. How can I achieve this using sed?
You can use the change command to replace the entire line, and the -i flag to make the changes in-place. For example, using GNU sed:
sed -i '/TEXT_TO_BE_REPLACED/c\This line is removed by the admin.' /tmp/foo
You need to use wildcards (.*) before and after to replace the whole line:
sed 's/.*TEXT_TO_BE_REPLACED.*/This line is removed by the admin./'
The Answer above:
sed -i '/TEXT_TO_BE_REPLACED/c\This line is removed by the admin.' /tmp/foo
Works fine if the replacement string/line is not a variable.
The issue is that on Redhat 5 the \ after the c escapes the $. A double \\ did not work either (at least on Redhat 5).
Through hit and trial, I discovered that the \ after the c is redundant if your replacement string/line is only a single line. So I did not use \ after the c, used a variable as a single replacement line and it was joy.
The code would look something like:
sed -i "/TEXT_TO_BE_REPLACED/c $REPLACEMENT_TEXT_STRING" /tmp/foo
Note the use of double quotes instead of single quotes.
The accepted answer did not work for me for several reasons:
my version of sed does not like -i with a zero length extension
the syntax of the c\ command is weird and I couldn't get it to work
I didn't realize some of my issues are coming from unescaped slashes
So here is the solution I came up with which I think should work for most cases:
function escape_slashes {
sed 's/\//\\\//g'
}
function change_line {
local OLD_LINE_PATTERN=$1; shift
local NEW_LINE=$1; shift
local FILE=$1
local NEW=$(echo "${NEW_LINE}" | escape_slashes)
# FIX: No space after the option i.
sed -i.bak '/'"${OLD_LINE_PATTERN}"'/s/.*/'"${NEW}"'/' "${FILE}"
mv "${FILE}.bak" /tmp/
}
So the sample usage to fix the problem posed:
change_line "TEXT_TO_BE_REPLACED" "This line is removed by the admin." yourFile
All of the answers provided so far assume that you know something about the text to be replaced which makes sense, since that's what the OP asked. I'm providing an answer that assumes you know nothing about the text to be replaced and that there may be a separate line in the file with the same or similar content that you do not want to be replaced. Furthermore, I'm assuming you know the line number of the line to be replaced.
The following examples demonstrate the removing or changing of text by specific line numbers:
# replace line 17 with some replacement text and make changes in file (-i switch)
# the "-i" switch indicates that we want to change the file. Leave it out if you'd
# just like to see the potential changes output to the terminal window.
# "17s" indicates that we're searching line 17
# ".*" indicates that we want to change the text of the entire line
# "REPLACEMENT-TEXT" is the new text to put on that line
# "PATH-TO-FILE" tells us what file to operate on
sed -i '17s/.*/REPLACEMENT-TEXT/' PATH-TO-FILE
# replace specific text on line 3
sed -i '3s/TEXT-TO-REPLACE/REPLACEMENT-TEXT/'
for manipulation of config files
i came up with this solution inspired by skensell answer
configLine [searchPattern] [replaceLine] [filePath]
it will:
create the file if not exists
replace the whole line (all lines) where searchPattern matched
add replaceLine on the end of the file if pattern was not found
Function:
function configLine {
local OLD_LINE_PATTERN=$1; shift
local NEW_LINE=$1; shift
local FILE=$1
local NEW=$(echo "${NEW_LINE}" | sed 's/\//\\\//g')
touch "${FILE}"
sed -i '/'"${OLD_LINE_PATTERN}"'/{s/.*/'"${NEW}"'/;h};${x;/./{x;q100};x}' "${FILE}"
if [[ $? -ne 100 ]] && [[ ${NEW_LINE} != '' ]]
then
echo "${NEW_LINE}" >> "${FILE}"
fi
}
the crazy exit status magic comes from https://stackoverflow.com/a/12145797/1262663
In my makefile I use this:
#sed -i '/.*Revision:.*/c\'"`svn info -R main.cpp | awk '/^Rev/'`"'' README.md
PS: DO NOT forget that the -i changes actually the text in the file... so if the pattern you defined as "Revision" will change, you will also change the pattern to replace.
Example output:
Abc-Project written by John Doe
Revision: 1190
So if you set the pattern "Revision: 1190" it's obviously not the same as you defined them as "Revision:" only...
bash-4.1$ new_db_host="DB_HOSTNAME=good replaced with 122.334.567.90"
bash-4.1$
bash-4.1$ sed -i "/DB_HOST/c $new_db_host" test4sed
vim test4sed
'
'
'
DB_HOSTNAME=good replaced with 122.334.567.90
'
it works fine
To do this without relying on any GNUisms such as -i without a parameter or c without a linebreak:
sed '/TEXT_TO_BE_REPLACED/c\
This line is removed by the admin.
' infile > tmpfile && mv tmpfile infile
In this (POSIX compliant) form of the command
c\
text
text can consist of one or multiple lines, and linebreaks that should become part of the replacement have to be escaped:
c\
line1\
line2
s/x/y/
where s/x/y/ is a new sed command after the pattern space has been replaced by the two lines
line1
line2
cat find_replace | while read pattern replacement ; do
sed -i "/${pattern}/c ${replacement}" file
done
find_replace file contains 2 columns, c1 with pattern to match, c2 with replacement, the sed loop replaces each line conatining one of the pattern of variable 1
To replace whole line containing a specified string with the content of that line
Text file:
Row: 0 last_time_contacted=0, display_name=Mozart, _id=100, phonebook_bucket_alt=2
Row: 1 last_time_contacted=0, display_name=Bach, _id=101, phonebook_bucket_alt=2
Single string:
$ sed 's/.* display_name=\([[:alpha:]]\+\).*/\1/'
output:
100
101
Multiple strings delimited by white-space:
$ sed 's/.* display_name=\([[:alpha:]]\+\).* _id=\([[:digit:]]\+\).*/\1 \2/'
output:
Mozart 100
Bach 101
Adjust regex to meet your needs
[:alpha] and [:digit:]
are Character Classes and Bracket Expressions
This worked for me:
sed -i <extension> 's/.*<Line to be replaced>.*/<New line to be added>/'
An example is:
sed -i .bak -e '7s/.*version.*/ version = "4.33.0"/'
-i: The extension for the backup file after the replacement. In this case, it is .bak.
-e: The sed script. In this case, it is '7s/.*version.*/ version = "4.33.0"/'. If you want to use a sed file use the -f flag
s: The line number in the file to be replaced. In this case, it is 7s which means line 7.
Note:
If you want to do a recursive find and replace with sed then you can grep to the beginning of the command:
grep -rl --exclude-dir=<directory-to-exclude> --include=\*<Files to include> "<Line to be replaced>" ./ | sed -i <extension> 's/.*<Line to be replaced>.*/<New line to be added>/'
The question asks for solutions using sed, but if that's not a hard requirement then there is another option which might be a wiser choice.
The accepted answer suggests sed -i and describes it as replacing the file in-place, but -i doesn't really do that and instead does the equivalent of sed pattern file > tmp; mv tmp file, preserving ownership and modes. This is not ideal in many circumstances. In general I do not recommend running sed -i non-interactively as part of an automatic process--it's like setting a bomb with a fuse of an unknown length. Sooner or later it will blow up on someone.
To actually edit a file "in place" and replace a line matching a pattern with some other content you would be well served to use an actual text editor. This is how it's done with ed, the standard text editor.
printf '%s\n' '/TEXT_TO_BE_REPLACED/' d i 'This line is removed by the admin' . w q | \
ed -s /tmp/foo > /dev/null
Note that this only replaces the first matching line, which is what the question implied was wanted. This is a material difference from most of the other answers.
That disadvantage aside, there are some advantages to using ed over sed:
You can replace the match with one or multiple lines without any extra effort.
The replacement text can be arbitrarily complex without needing any escaping to protect it.
Most importantly, the original file is opened, modified, and saved. A copy is not made.
How it works
How it works:
printf will use its first argument as a format string and print each of its other arguments using that format, effectively meaning that each argument to printf becomes a line of output, which is all sent to ed on stdin.
The first line is a regex pattern match which causes ed to move its notion of "the current line" forward to the first line that matches (if there is no match the current line is set to the last line of the file).
The next is the d command which instructs ed to delete the entire current line.
After that is the i command which puts ed into insert mode;
after that all subsequent lines entered are written to the current line (or additional lines if there are any embedded newlines). This means you can expand a variable (e.g. "$foo") containing multiple lines here and it will insert all of them.
Insert mode ends when ed sees a line consisting of .
The w command writes the content of the file to disk, and
the q command quits.
The ed command is given the -s switch, putting it into silent mode so it doesn't echo any information as it runs,
the file to be edited is given as an argument to ed,
and, finally, stdout is thrown away to prevent the line matching the regex from being printed.
Some Unix-like systems may (inappropriately) ship without an ed installed, but may still ship with an ex; if so you can simply use it instead. If have vim but no ex or ed you can use vim -e instead. If you have only standard vi but no ex or ed, complain to your sysadmin.
It is as similar to above one..
sed 's/[A-Za-z0-9]*TEXT_TO_BE_REPLACED.[A-Za-z0-9]*/This line is removed by the admin./'
Below command is working for me. Which is working with variables
sed -i "/\<$E\>/c $D" "$B"
I very often use regex to extract data from files I just used that to replace the literal quote \" with // nothing :-)
cat file.csv | egrep '^\"([0-9]{1,3}\.[0-9]{1,3}\.)' | sed s/\"//g | cut -d, -f1 > list.txt
Appending can be done using tee command.
cat file | tee -a >> *
Is there a way to do a prepend/insertion?
Thanks.
Using sed might help
example:
sed -i.bak '3 r tmp1.txt' settings.xml
will add the contents of tmp1.txt after line 3 in settings.xml (and create a backup file with the .bak extension)
Just a brief example: say, comment out specific/particular/arbitrary C lines:
$ echo -e "1\n2\n3\n4\n5\n6\n" | sed "3s,^,/* ,;5s,$, */,"
1
2
/* 3
4
5 */
6
Note:
single sed command follows a format "${linenum}s/${search}/${replace}/"
then two commands can be delimited by a semicolon ';'
using a comma ',' as delimiter, for easier reading of s///
Caret '^' matches start of line; dollar '$' matches end of line; the s/// will replace only those (meta?)"characters"
Of course, then this should be modified with the -i switch to sed, to eventually replace file contents..
Cheers!
EDIT: Refs:
Can we give multiple patterns to a sed command??? - The UNIX and Linux Forums
Cute ‘sed’ Tricks to Modify Specific Lines Within File | The Linux Daily