I've successfully (I think!) removed large files from a gitlab project mirrored on my local drive using BFG. I don't want to replace the existing gitlab project (for safety reasons), but instead want to push to a new test gitlab project. Here's the commands I've done successfully so far:
git clone --mirror git#git.domain.com:architecture-team/IOMobile.git
java -jar bfg.jar --strip-blobs-bigger-than 100M IOMobile.git/
cd IOMobile.git
git reflog expire --expire=now --all
git gc --prune=now --aggressive
Those commands seem to have done the trick, now how do I reset the origin to:
git#git.domain.com:architecture-team/testiomobile.git
...and then push the mirror into the new project? I'm not sure how to reset the origin on a mirror and want to make sure I don't change the original project.
Do I just do a simple
git push
or do I need
git push --mirror
Thanks for any help
-Owen
I think in this case it does not matter if you specify --mirror or not. Since you cloned it already with the --mirror flag, a normal git push will update all refs on the remote server. This is also described at the bfg docs: https://rtyley.github.io/bfg-repo-cleaner/
But there is a gotcha you could run into. If you see this error message while pushing:
remote: GitLab: You are not allowed to force push code to a protected branch on this project.
Then you have to enable Allow force push option in the GitLab project settings at URL https://git.domain.com/architecture-team/testiomobile/-/settings/repository
After the push you should disable the Allow force push again.
Related
When I want to push new contents to my Github, I used
git push
or
git pull
It's not working, like this but I used it successfully one hour before.
So I tried
git push origin master
Now it's success, magic.
But I don't know why about it, and how I need to do to go back that just needs input 2 words.
I tried
git config --global sendpack.sidehand false
Thanks in advance.
Add:
git push -u origin master
told me "Branch master set up to track remote branch master from origin"
I know that's right, but git push still can't work as expected
The configuration you mentioned is unrelated to your problem (you should probably undo that). If you want to set up the master branch on the origin remote repository as the default branch to push to from your current branch, run once
git push -u origin master
# or
git push --set-upstream origin master
and then use just git push afterwards.
I am using git from a long time but never set it up on server. Refereeing to this Git: move existing repository from PC to server, clone from server
I have initiate a bare repo on server but while adding origin in local
"git remote add origin server:path/to/repo" i have no idea what to add here. My site is getwalkwel.com and user is getwamld
Thanks
Origin is the name of a remote which is typically created automatically when you clone a repo from another repo. The origin reference in the cloned repo will be created to point back to the repo that was cloned from.
In your case, where the bare repo was actually created later from your working repo, you will create origin in your working repo to point back to your new bare repo.
This is done with:
git remote add origin /barerepo/fullname
If your bare repo is going to line on a different machine, then you need the URL to reach the repo instead of just a file path.
For instance, you might have myuser#myserver:path/to/repo
Bare repository in Git is a repository which only contains version control information only in fact this will not have .git sub-directory or any working files.
This kind of repository is helpful when you need to share or divide your work between few people for example in work environment you and your team mates are working on same project and you all need to see changes and all needs to do push to repository in this case this repository is more useful.
You can add the remote repository to local git repo
$ git remote add origin ssh://myserver.com/var/git/myapp.git
pushing to remote repository:
to push our local master branch to the origin's master branch. You can do that using the git push <target> <local> command.
$ git push origin master
click here for more information on how this works
I set-up a heroku Node project. Everything works fine but I would like to be able to push also on my bibucket repository. Git is set-up for Herokuy but when I try to add the bitbucket repository with the command:
cd /path/to/my/repo
git remote add origin git#bitbucket.org:MYUSERNAME_/PROJECTNAME.git
I get the following error:
fatal: remote origin already exists.
So I tried to run the command
git push origin master
And I get the response:
Username for 'https://github.com':
How can I push both in heroku and on my bitbucket repository?
You already have an origin repo defined (as github) so if you have the git project in bitbucket so you just need to reference as a new repo
git remote add bitbucket git#bitbucket.org:MYUSERNAME_/PROJECTNAME.git
then you will be able to run
git push bitbucket master (or any branch you have defined)
If you do not want to use github anymore and replace your origin repo with bitbucket, do
git remote set-url origin git#bitbucket.org:MYUSERNAME_/PROJECTNAME.git
and then
git push origin master
will push to your bitbucket repo - make sure to follow heroku instructions to add the heroku repo and push your files there to be deployed
Deendayal Garg gave me the right hint: with:
git remote -v
I could see that I had the original repository as origin remote. I deleted that, I unshallowed it (because the original repository was cloned with the -depth option) and I finally could add my personal bitbuket remote!
i am new to webdeveloping and stuff, I want to push my html and css files to github but after I do git commit and git push origin master I get this error:
fatal: 'origin' does not appear to be a git repository
fatal: Could not read from remote repository.
Sorry if this is a silly question, but I am new and I couldn't find the answer online. I looked into several tutorials and did not succeed in pushing my page to GitHub. I have managed to update my README.md file using this tutorial: http://git-scm.com/book/en/v2/Git-Basics-Getting-a-Git-Repository
From the GitHub documentation, you need to configure your origin to point to the GitHub remote:
git remote add origin https://github.com/user/repo.git
# Set a new remote
git remote -v
# Verify new remote
Replace https://github.com/user/repo.git with the actual path to your remote repository on GitHub.
The issue is that you don't have the repository uploaded remotely (ie. on Github).
Follow these instructions if you want the repository pushed to GitHub: https://help.github.com/articles/adding-an-existing-project-to-github-using-the-command-line/. You seem to have done the first 6 steps already (up to committing). Note: you require a GitHub account for this and the repository will be publicly available to read unless you pay (don't worry - people won't be able to write into the repository unless you let them).
I'm a complete noob when it comes to version control, but I recently started using GitHub to host some of my projects. I blindly use the command git push origin master to push changes to either of the two repositories. I don't understand how Git knows which repository to push to. I use the same command to push to each. Does the directory I'm in have anything to do with it?
Thanks for clearing this up for me.
A word of advice, "blindly use"ing anything is a bad idea.
git has a system of remotes which allows to specify URLs and transports to repositories other than the one where you're working. git push origin master pushes the current branch to the remote called origin as the branch master. You have a remote called origin. This is created by default when you clone a repository from a URL.
git remote add origin http://abc.com/def/ghi.git tells git the url that remote 'origin' points to.
When you use git push origin master, you aren't pushing to two repositories - you are pushing to the master branch in your repository who's name (alias) is origin.
Think of it like this:
I'm pushing my stuff to origin which is my repository address. What am I pushing there? My master branch.
If you are new and set git up yourself through git init, you probably aren't pushing to two repositories. Run this command to see what your remotes are:
git remote -v
This will return something like (assuming you have a git hosting service like github):
blahblah git#github.com:yourGithubName/fileName.git (fetch)
blahblah git#github.com:yourGithubName/fileName.git (push)
git#github.com:yourGithubName/fileName.git is your repository address. Some addresses are prefixed by https:// .
Git repositories contain a .git directory that contains metadata about the repository. That's what Git uses to determine where to push your changes.