I have .txt files, which I am taking as $item and then I am changing the encoding with
iconv -f $currentEncoding -t $targetEncoding "$item" -o "$item.tmp"
then I am saving it again to txt file using
mv "$item.tmp" "$item.txt";
next I am trimming a few things in txt file and saving it as a csv file with
tr -d '"' < "$item.txt" > "$item.csv";
but eventually my files are getting stored with extension "*.txt.csv" - I want them to be just .csv - can anyone help me please what I am doing wrong or what could I change. Thanks
Run:
for f in *.txt.csv; do mv $f ${f/.txt./.}; done
If the variable $f contains the string item.txt.csv, the expression ${f/.txt./.} removes .txt from the file name and gives only the string item.csv.
Caution: if one of the filenames contain spaces, the for statement will not work as expected.
From what I understand, your $item already has .txt in the value.
So, if you list your files after each command, you should see intermediate files like
xyz.txt.tmp
xyz.txt.txt
xyz.txt.csv
So, when you set the item variable, just do ${item%%.*} as shown below and it should work as expected.
item=xyz.txt
item="${item%%.*}"
echo $item
xyz
Related
I have a folder/subfolders that contain some files with filenames that end with a random numeric extension:
DWH..AUFTRAG.20211123115143.A901.3801176
DWH..AUFTRAGSPOSITION.20211122002147.A901.3798013
I would like to remove everything after A901 from the above filenames.
For example:
DWH..AUFTRAG.20211123115143.A901 (remove this .3801176)
DWH..AUFTRAGSPOSITION.20211122002147.A901 (remove this .3798013) from the filename
How do I use rename or any other command in linux to remove only after A901 everything from finale rest file name keep as it is?
I can see there is 5 '.' (dots) before the number so I did some desi jugad.
I made some files in folder and also made a folder and created some files inside that folder accourding to the name pattern that you gave.
I created a command and it somewhat looks like this.
find "$PWD"|grep A901|while read F; do mv "${F}" `echo ${F}|cut -d . -f 1-5`;done
When executed it worked for me.
terminal output below.
rexter#rexter:~/Desktop/test$ find $PWD
/home/rexter/Desktop/test
/home/rexter/Desktop/test/test1
/home/rexter/Desktop/test/test1/DWH..AUFTRAG.20211123115143.A901.43214
/home/rexter/Desktop/test/test1/DWH..AUFTRAGSPOSITION.2021112200fsd2147.A901.31244324
/home/rexter/Desktop/test/DWH..AUFTRAG.20211123115143.A901.321423
/home/rexter/Desktop/test/DWH..AUFTRAGSPOSITION.20211122002147.A901.3124325
rexter#rexter:~/Desktop/test$ find "$PWD"|grep A901|while read F; do mv "${F}" `echo ${F}|cut -d . -f 1-5`;done
rexter#rexter:~/Desktop/test$ find $PWD
/home/rexter/Desktop/test
/home/rexter/Desktop/test/test1
/home/rexter/Desktop/test/test1/DWH..AUFTRAG.20211123115143.A901
/home/rexter/Desktop/test/test1/DWH..AUFTRAGSPOSITION.2021112200fsd2147.A901
/home/rexter/Desktop/test/DWH..AUFTRAG.20211123115143.A901
/home/rexter/Desktop/test/DWH..AUFTRAGSPOSITION.20211122002147.A901
rexter#rexter:~/Desktop/test$
I dont know if this is a proper way to do it but it just make things work.
Let me know if it is useful to you.
I have 25 files in a directory. I need to amass 25000 files for testing purposes. I thought I could just replicate these files over and over until I get 25000 files. I could manually copy paste 1000 times but that seemed tedious. So I thought I could write a script to do it for me. I tried
cp * .
As a trial but I got an error that said the source and destination file are the same. If I were to automate it how would i do it so that each of the 1000 times the new files are made with unique names?
As discussed in the comments, you can do something like this:
for file in *
do
filename="${file%.*}" # get everything up to last dot
extension="${file##*.}" # get extension (text after last dot)
for i in {00001..10000}
do
cp $file ${filename}${i}${extension}
done
done
The trick for i in {00001..10000} is used to loop from 1 to 10000 having the number with leading zeros.
The ${filename}${i}${extension} is the same as $filename$i$extension but makes more clarity over what is a variable name and what is text. This way, you can also do ${filename}_${i}${extension} to get files like a_23.txt, etc.
In case your current files match a specific pattern, you can always do for file in a* (if they all are on the a + something format).
If you want to keep the extension of the files, you can use this. Assuming, you want to copy all txt-files:
#!/bin/bash
for f in *.txt
do
for i in {1..10000}
do
cp "$f" "${f%.*}_${i}.${f##*.}"
done
done
You could try this:
for file in *; do for i in {1..1000}; do cp $file $file-$i; done; done;
It will append a number to any existing files.
The next script
for file in *.*
do
eval $(sed 's/\(.*\)\.\([^\.]*\)$/base="\1";ext="\2";/' <<< "$file")
for n in {1..1000}
do
echo cp "$file" "$base-$n.$ext"
done
done
will:
take all files with extensions *.*
creates the basename and extension (sed)
in a cycle 1000 times copyes the original file to file-number.extension
it is for DRY-RUN, remove the echo if satisfied
I am new to linux. I am trying to copy files from one path to another path. I have a text file which has all names of files in the following pattern:
file-1.txt
file-2.pdf
file-3.ppt
....
I created a .sh file with the following code:
#!/bin/bash
file=`cat filenames.txt`;
fromPath='/root/Backup/upload/';
toPath='/root/Desktop/custom/upload/';
for i in $file;
do
filePath=$fromPath$i
#echo $filePath
if [ -e $filePath ];
then
echo $filePath
yes | cp -rf $filePath $toPath
else
echo 'no files'
fi
done
The above code is copying only the last file name from the text instead of all to the destination path.
Please help.
The proper way to loop over a set of input lines is
while read i; do
: something with "$i"
done <filenames.txt
Note the use of double quotes around "$i" and generally variable interpolation where the string contains a filename component. Unquoted values are only appropriate when you specifically require the shell to do word splitting and wildcard resolution.
I need help copying content from various files to others (same name and format, different path).
For example, $HOME/initial/baby.desktop has text which I need to write into $HOME/scripts/baby.desktop. This is very simple for a single file, but I have 2500 files in $HOME/initial/ and the same number in $HOME/scripts/ with corresponding names (same names and format). I want append (copy) the content of file in path A to path B (which have the same name and format), to the end of file in path B without erase the content of file in path B.
Example content of $HOME/initial/*.desktop to final $HOME/scripts/*.desktop. I tried the following, but it don't work:
cd $HOME/initial/
for i in $( ls *.desktop ); do egrep "Icon" $i >> $HOME/scripts/$i; done
Firstly, I would backup $HOME/initial and $HOME/scripts, because there is lots of scope for people misunderstanding your question. Like this:
cd $HOME
tar -cvf initial.tar initial
tar -cvf scripts.tar scripts
That will put all the files in $HOME/initial into a single tarfile called initial.tar and all the files in $HOME/scripts into a single tarfile called scripts.tar.
Now for your question... in general, if you want to put the contents of FileB onto the end of FileA, the command is
cat FileB >> FileA
Note the DOUBLE ">>" which means "append" rather than single ">" which means overwrite.
So, I think you want to do this:
cd $HOME/initial/baby.desktop
cat SomeFile >> $HOME/scripts/baby.desktop/SomeFile
where SomeFile is the name of any file you choose to test with. I would test that has worked and then, if you are happy with that, go ahead and run the same command inside a loop:
cd $HOME/initial/baby.desktop
for SOURCE in *
do
DESTINATION="$HOME/scripts/baby.desktop/$SOURCE"
echo Appending "$SOURCE" to "$DESTINATION"
#cat "$SOURCE" >> "$DESTINATION"
done
When the output looks correct, remove the "#" at the start of the penultimate line and run it again.
I solved it, if some people want learn how to resolve is very simple:
using Sed
I need only the match (or pattern) line "Icon=/usr/share/some_picture.png into $HOME/initial/example.desktop to other with same name and format $HOME/scripts/example.desktop, but I had a lot of .desktop files (2500 files)
cd $HOME/initial
STRING_LINE=`grep -l -R "Icon=" *.desktop`
for i in $STRING_LINE; do sed -ne '/Icon=/ p' $i >> $HOME/scripts/$i ; done
_________
If you need only copy all to other file with same name and format
using cat
cd $HOME/initial
STRING_LINE=`grep -l -R "Icon=" *.desktop`
for i in $STRING_LINE; do cat $i >> $HOME/scripts/$i ; done
I have a folder that is full of .bak files and some other files also. I need to remove the extension of all .bak files in that folder. How do I make a command which will accept a folder name and then remove the extension of all .bak files in that folder ?
Thanks.
To remove a string from the end of a BASH variable, use the ${var%ending} syntax. It's one of a number of string manipulations available to you in BASH.
Use it like this:
# Run in the same directory as the files
for FILENAME in *.bak; do mv "$FILENAME" "${FILENAME%.bak}"; done
That works nicely as a one-liner, but you could also wrap it as a script to work in an arbitrary directory:
# If we're passed a parameter, cd into that directory. Otherwise, do nothing.
if [ -n "$1" ]; then
cd "$1"
fi
for FILENAME in *.bak; do mv "$FILENAME" "${FILENAME%.bak}"; done
Note that while quoting your variables is almost always a good practice, the for FILENAME in *.bak is still dangerous if any of your filenames might contain spaces. Read David W.'s answer for a more-robust solution, and this document for alternative solutions.
There are several ways to remove file suffixes:
In BASH and Kornshell, you can use the environment variable filtering. Search for ${parameter%word} in the BASH manpage for complete information. Basically, # is a left filter and % is a right filter. You can remember this because # is to the left of %.
If you use a double filter (i.e. ## or %%, you are trying to filter on the biggest match. If you have a single filter (i.e. # or %, you are trying to filter on the smallest match.
What matches is filtered out and you get the rest of the string:
file="this/is/my/file/name.txt"
echo ${file#*/} #Matches is "this/` and will print out "is/my/file/name.txt"
echo ${file##*/} #Matches "this/is/my/file/" and will print out "name.txt"
echo ${file%/*} #Matches "/name.txt" and will print out "/this/is/my/file"
echo ${file%%/*} #Matches "/is/my/file/name.txt" and will print out "this"
Notice this is a glob match and not a regular expression match!. If you want to remove a file suffix:
file_sans_ext=${file%.*}
The .* will match on the period and all characters after it. Since it is a single %, it will match on the smallest glob on the right side of the string. If the filter can't match anything, it the same as your original string.
You can verify a file suffix with something like this:
if [ "${file}" != "${file%.bak}" ]
then
echo "$file is a type '.bak' file"
else
echo "$file is not a type '.bak' file"
fi
Or you could do this:
file_suffix=$(file##*.}
echo "My file is a file '.$file_suffix'"
Note that this will remove the period of the file extension.
Next, we will loop:
find . -name "*.bak" -print0 | while read -d $'\0' file
do
echo "mv '$file' '${file%.bak}'"
done | tee find.out
The find command finds the files you specify. The -print0 separates out the names of the files with a NUL symbol -- which is one of the few characters not allowed in a file name. The -d $\0means that your input separators are NUL symbols. See how nicely thefind -print0andread -d $'\0'` together?
You should almost never use the for file in $(*.bak) method. This will fail if the files have any white space in the name.
Notice that this command doesn't actually move any files. Instead, it produces a find.out file with a list of all the file renames. You should always do something like this when you do commands that operate on massive amounts of files just to be sure everything is fine.
Once you've determined that all the commands in find.out are correct, you can run it like a shell script:
$ bash find.out
rename .bak '' *.bak
(rename is in the util-linux package)
Caveat: there is no error checking:
#!/bin/bash
cd "$1"
for i in *.bak ; do mv -f "$i" "${i%%.bak}" ; done
You can always use the find command to get all the subdirectories
for FILENAME in `find . -name "*.bak"`; do mv --force "$FILENAME" "${FILENAME%.bak}"; done