I would like to find the newest sub directory in a directory and save the result to variable in bash.
Something like this:
ls -t /backups | head -1 > $BACKUPDIR
Can anyone help?
BACKUPDIR=$(ls -td /backups/*/ | head -1)
$(...) evaluates the statement in a subshell and returns the output.
There is a simple solution to this using only ls:
BACKUPDIR=$(ls -td /backups/*/ | head -1)
-t orders by time (latest first)
-d only lists items from this folder
*/ only lists directories
head -1 returns the first item
I didn't know about */ until I found Listing only directories using ls in bash: An examination.
This ia a pure Bash solution:
topdir=/backups
BACKUPDIR=
# Handle subdirectories beginning with '.', and empty $topdir
shopt -s dotglob nullglob
for file in "$topdir"/* ; do
[[ -L $file || ! -d $file ]] && continue
[[ -z $BACKUPDIR || $file -nt $BACKUPDIR ]] && BACKUPDIR=$file
done
printf 'BACKUPDIR=%q\n' "$BACKUPDIR"
It skips symlinks, including symlinks to directories, which may or may not be the right thing to do. It skips other non-directories. It handles directories whose names contain any characters, including newlines and leading dots.
Well, I think this solution is the most efficient:
path="/my/dir/structure/*"
backupdir=$(find $path -type d -prune | tail -n 1)
Explanation why this is a little better:
We do not need sub-shells (aside from the one for getting the result into the bash variable).
We do not need a useless -exec ls -d at the end of the find command, it already prints the directory listing.
We can easily alter this, e.g. to exclude certain patterns. For example, if you want the second newest directory, because backup files are first written to a tmp dir in the same path:
backupdir=$(find $path -type -d -prune -not -name "*temp_dir" | tail -n 1)
The above solution doesn't take into account things like files being written and removed from the directory resulting in the upper directory being returned instead of the newest subdirectory.
The other issue is that this solution assumes that the directory only contains other directories and not files being written.
Let's say I create a file called "test.txt" and then run this command again:
echo "test" > test.txt
ls -t /backups | head -1
test.txt
The result is test.txt showing up instead of the last modified directory.
The proposed solution "works" but only in the best case scenario.
Assuming you have a maximum of 1 directory depth, a better solution is to use:
find /backups/* -type d -prune -exec ls -d {} \; |tail -1
Just swap the "/backups/" portion for your actual path.
If you want to avoid showing an absolute path in a bash script, you could always use something like this:
LOCALPATH=/backups
DIRECTORY=$(cd $LOCALPATH; find * -type d -prune -exec ls -d {} \; |tail -1)
With GNU find you can get list of directories with modification timestamps, sort that list and output the newest:
find . -mindepth 1 -maxdepth 1 -type d -printf "%T#\t%p\0" | sort -z -n | cut -z -f2- | tail -z -n1
or newline separated
find . -mindepth 1 -maxdepth 1 -type d -printf "%T#\t%p\n" | sort -n | cut -f2- | tail -n1
With POSIX find (that does not have -printf) you may, if you have it, run stat to get file modification timestamp:
find . -mindepth 1 -maxdepth 1 -type d -exec stat -c '%Y %n' {} \; | sort -n | cut -d' ' -f2- | tail -n1
Without stat a pure shell solution may be used by replacing [[ bash extension with [ as in this answer.
Your "something like this" was almost a hit:
BACKUPDIR=$(ls -t ./backups | head -1)
Combining what you wrote with what I have learned solved my problem too. Thank you for rising this question.
Note: I run the line above from GitBash within Windows environment in file called ./something.bash.
Related
Is there any sort option available in find command to get directory with least access date/time
find . -type d -printf "%A# %p\n" | sort -n | tail -n 1 | cut -d " " -f 2-
If you prefer the filename without leading path, replace %p by %f.
the below linux command displays the access and modified time along with size
stat -f
find -type d -printf '%T+ %p\n' | sort | head -1
source
find -type d -printf '%T+ %p\n' | sort
This sound like more of a job for ls:
ls -ultd *|grep ^d
The problem with using find, at least on my system (cygwin/bash), is that find accesses the dirs, so all access-times result in current time, defeating your apparent purpose.
A simple shell script will also do:
unset -v oldest
for i in "$dir"/*; do
[ "$i" -ot "$oldest" -o "$oldest" = "" ] && oldest="$i"
done
note: to find the oldest directory use "$dir"/*/ above (thanks Cyrus) and -type d below with the find command.
In bash if you need a recursive solution, then you can rewrite it as a while loop with process substitution using find
unset -v oldest
while IFS= read -r i; do
[ "$i" -ot "$oldest" -o "$oldest" = "" ] && oldest="$i"
done < <(find "$dir" -type f)
I am able to list all the directories by
find ./ -type d
I attempted to list the contents of each directory and count the number of files in each directory by using the following command
find ./ -type d | xargs ls -l | wc -l
But this summed the total number of lines returned by
find ./ -type d | xargs ls -l
Is there a way I can count the number of files in each directory?
This prints the file count per directory for the current directory level:
du -a | cut -d/ -f2 | sort | uniq -c | sort -nr
Assuming you have GNU find, let it find the directories and let bash do the rest:
find . -type d -print0 | while read -d '' -r dir; do
files=("$dir"/*)
printf "%5d files in directory %s\n" "${#files[#]}" "$dir"
done
find . -type f | cut -d/ -f2 | sort | uniq -c
find . -type f to find all items of the type file, in current folder and subfolders
cut -d/ -f2 to cut out their specific folder
sort to sort the list of foldernames
uniq -c to return the number of times each foldername has been counted
You could arrange to find all the files, remove the file names, leaving you a line containing just the directory name for each file, and then count the number of times each directory appears:
find . -type f |
sed 's%/[^/]*$%%' |
sort |
uniq -c
The only gotcha in this is if you have any file names or directory names containing a newline character, which is fairly unlikely. If you really have to worry about newlines in file names or directory names, I suggest you find them, and fix them so they don't contain newlines (and quietly persuade the guilty party of the error of their ways).
If you're interested in the count of the files in each sub-directory of the current directory, counting any files in any sub-directories along with the files in the immediate sub-directory, then I'd adapt the sed command to print only the top-level directory:
find . -type f |
sed -e 's%^\(\./[^/]*/\).*$%\1%' -e 's%^\.\/[^/]*$%./%' |
sort |
uniq -c
The first pattern captures the start of the name, the dot, the slash, the name up to the next slash and the slash, and replaces the line with just the first part, so:
./dir1/dir2/file1
is replaced by
./dir1/
The second replace captures the files directly in the current directory; they don't have a slash at the end, and those are replace by ./. The sort and count then works on just the number of names.
Here's one way to do it, but probably not the most efficient.
find -type d -print0 | xargs -0 -n1 bash -c 'echo -n "$1:"; ls -1 "$1" | wc -l' --
Gives output like this, with directory name followed by count of entries in that directory. Note that the output count will also include directory entries which may not be what you want.
./c/fa/l:0
./a:4
./a/c:0
./a/a:1
./a/a/b:0
Slightly modified version of Sebastian's answer using find instead of du (to exclude file-size-related overhead that du has to perform and that is never used):
find ./ -mindepth 2 -type f | cut -d/ -f2 | sort | uniq -c | sort -nr
-mindepth 2 parameter is used to exclude files in current directory. If you remove it, you'll see a bunch of lines like the following:
234 dir1
123 dir2
1 file1
1 file2
1 file3
...
1 fileN
(much like the du-based variant does)
If you do need to count the files in current directory as well, use this enhanced version:
{ find ./ -mindepth 2 -type f | cut -d/ -f2 | sort && find ./ -maxdepth 1 -type f | cut -d/ -f1; } | uniq -c | sort -nr
The output will be like the following:
234 dir1
123 dir2
42 .
Everyone else's solution has one drawback or another.
find -type d -readable -exec sh -c 'printf "%s " "$1"; ls -1UA "$1" | wc -l' sh {} ';'
Explanation:
-type d: we're interested in directories.
-readable: We only want them if it's possible to list the files in them. Note that find will still emit an error when it tries to search for more directories in them, but this prevents calling -exec for them.
-exec sh -c BLAH sh {} ';': for each directory, run this script fragment, with $0 set to sh and $1 set to the filename.
printf "%s " "$1": portably and minimally print the directory name, followed by only a space, not a newline.
ls -1UA: list the files, one per line, in directory order (to avoid stalling the pipe), excluding only the special directories . and ..
wc -l: count the lines
This can also be done with looping over ls instead of find
for f in */; do echo "$f -> $(ls $f | wc -l)"; done
Explanation:
for f in */; - loop over all directories
do echo "$f -> - print out each directory name
$(ls $f | wc -l) - call ls for this directory and count lines
This should return the directory name followed by the number of files in the directory.
findfiles() {
echo "$1" $(find "$1" -maxdepth 1 -type f | wc -l)
}
export -f findfiles
find ./ -type d -exec bash -c 'findfiles "$0"' {} \;
Example output:
./ 6
./foo 1
./foo/bar 2
./foo/bar/bazzz 0
./foo/bar/baz 4
./src 4
The export -f is required because the -exec argument of find does not allow executing a bash function unless you invoke bash explicitly, and you need to export the function defined in the current scope to the new shell explicitly.
My answer is a little different, due to the options of find, you can actually be much more flexible. Just try:
find . -type f -printf "%h\n" | sort | uniq -c
With the "%h" option to "-printf", find prints only the directory of the files it found. Then sort and count with "uniq -c". This prints the number of search result entries with the same directory, per directory.
Using further options on find, you can be much more flexible. For example, to get an overview how many files in which directory have been modified at a certain date, use:
find . -newermt "2022-01-01 00:00:00" -type f -printf "%TY-%Tm-%Td %h\n" | sort | uniq -c
This finds all files that have been modified since 1. January 2022, prints (with "-printf") the modification date and the directory, then sorts and counts them. In this example, each line in the result has the number of files, the date of modification (without time), and the directory.
Note that "-printf" may not be available in all versions of find I think.
I combined #glenn jackman's answer and #pcarvalho's answer(in comment list, there is something wrong with pcarvalho's answer because the extra style control function of character '`'(backtick)).
My script can accept path as an augument and sort the directory list as ls -l, also it can handles the problem of "space in file name".
#!/bin/bash
OLD_IFS="$IFS"
IFS=$'\n'
for dir in $(find $1 -maxdepth 1 -type d | sort);
do
files=("$dir"/*)
printf "%5d,%s\n" "${#files[#]}" "$dir"
done
FS="$OLD_IFS"
My first answer in stackoverflow, and I hope it can help someone ^_^
THis could be another way to browse through the directory structures and provide depth results.
find . -type d | awk '{print "echo -n \""$0" \";ls -l "$0" | grep -v total | wc -l" }' | sh
find . -type f -printf '%h\n' | sort | uniq -c
gives for example:
5 .
4 ./aln
5 ./aln/iq
4 ./bs
4 ./ft
6 ./hot
I tried with some of the others here but ended up with subfolders included in the file count when I only wanted the files. This prints ./folder/path<tab>nnn with the number of files, not including subfolders, for each subfolder in the current folder.
for d in `find . -type d -print`
do
echo -e "$d\t$(find $d -maxdepth 1 -type f -print | wc -l)"
done
This will give the overall count.
for file in */; do echo "$file -> $(ls $file | wc -l)"; done | cut -d ' ' -f 3| py --ji -l 'numpy.sum(l)'
A super fast miracle command, which recursively traverses files to count the number of images in a directory and organize the output by image extension:
find . -type f | sed -e 's/.*\.//' | sort | uniq -c | sort -n | grep -Ei '(tiff|bmp|jpeg|jpg|png|gif)$'
Credits: https://unix.stackexchange.com/a/386135/354980
I edited the script in order to exclude all node_modules directories inside the analyzed one.
This can be used to check if the project number of files is exceeding the maximum number that the file watcher can handle.
find . -type d ! -path "*node_modules*" -print0 | while read -d '' -r dir; do
files=("$dir"/*)
printf "%5d files in directory %s\n" "${#files[#]}" "$dir"
done
To check the maximum files that your system can watch:
cat /proc/sys/fs/inotify/max_user_watches
node_modules folder should be added to your IDE/editor excluded paths in slow systems, and the other files count shouldn't ideally exceed the maximum (which can be changed though).
Easy Method:
find ./|grep "Search_file.txt" |cut -d"/" -f2|sort |uniq -c
In my case I needed the count at subfolder level, so I did:
du -a | cut -d/ -f3 | sort | uniq -c | sort -nr
Easy way to recursively find files of a given type. In this case, .jpg files for all folders in current directory:
find . -name *.jpg -print | wc -l
omg why the complex commands. just use something like
find whatever_folder | wc -l
I am new to shell scripting, so I need some help here. I have a directory that fills up with backups. If I have more than 10 backup files, I would like to remove the oldest files, so that the 10 newest backup files are the only ones that are left.
So far, I know how to count the files, which seems easy enough, but how do I then remove the oldest files, if the count is over 10?
if [ls /backups | wc -l > 10]
then
echo "More than 10"
fi
Try this:
ls -t | sed -e '1,10d' | xargs -d '\n' rm
This should handle all characters (except newlines) in a file name.
What's going on here?
ls -t lists all files in the current directory in decreasing order of modification time. Ie, the most recently modified files are first, one file name per line.
sed -e '1,10d' deletes the first 10 lines, ie, the 10 newest files. I use this instead of tail because I can never remember whether I need tail -n +10 or tail -n +11.
xargs -d '\n' rm collects each input line (without the terminating newline) and passes each line as an argument to rm.
As with anything of this sort, please experiment in a safe place.
find is the common tool for this kind of task :
find ./my_dir -mtime +10 -type f -delete
EXPLANATIONS
./my_dir your directory (replace with your own)
-mtime +10 older than 10 days
-type f only files
-delete no surprise. Remove it to test your find filter before executing the whole command
And take care that ./my_dir exists to avoid bad surprises !
Make sure your pwd is the correct directory to delete the files then(assuming only regular characters in the filename):
ls -A1t | tail -n +11 | xargs rm
keeps the newest 10 files. I use this with camera program 'motion' to keep the most recent frame grab files. Thanks to all proceeding answers because you showed me how to do it.
The proper way to do this type of thing is with logrotate.
I like the answers from #Dennis Williamson and #Dale Hagglund. (+1 to each)
Here's another way to do it using find (with the -newer test) that is similar to what you started with.
This was done in bash on cygwin...
if [[ $(ls /backups | wc -l) > 10 ]]
then
find /backups ! -newer $(ls -t | sed '11!d') -exec rm {} \;
fi
Straightforward file counter:
max=12
n=0
ls -1t *.dat |
while read file; do
n=$((n+1))
if [[ $n -gt $max ]]; then
rm -f "$file"
fi
done
I just found this topic and the solution from mikecolley helped me in a first step. As I needed a solution for a single line homematic (raspberrymatic) script, I ran into a problem that this command only gave me the fileames and not the whole path which is needed for "rm". My used CUxD Exec command can not start in a selected folder.
So here is my solution:
ls -A1t $(find /media/usb0/backup/ -type f -name homematic-raspi*.sbk) | tail -n +11 | xargs rm
Explaining:
find /media/usb0/backup/ -type f -name homematic-raspi*.sbk searching only files -type f whiche are named like -name homematic-raspi*.sbk (case sensitive) or use -iname (case insensitive) in folder /media/usb0/backup/
ls -A1t $(...) list the files given by find without files starting with "." or ".." -A sorted by mtime -t and with a return of only one column -1
tail -n +11 return of only the last 10 -n +11 lines for following rm
xargs rm and finally remove the raiming files in the list
Maybe this helps others from longer searching and makes the solution more flexible.
stat -c "%Y %n" * | sort -rn | head -n +10 | \
cut -d ' ' -f 1 --complement | xargs -d '\n' rm
Breakdown: Get last-modified times for each file (in the format "time filename"), sort them from oldest to newest, keep all but the last ten entries, and then keep all but the first field (keep only the filename portion).
Edit: Using cut instead of awk since the latter is not always available
Edit 2: Now handles filenames with spaces
On a very limited chroot environment, we had only a couple of programs available to achieve what was initially asked. We solved it that way:
MIN_FILES=5
FILE_COUNT=$(ls -l | grep -c ^d )
if [ $MIN_FILES -lt $FILE_COUNT ]; then
while [ $MIN_FILES -lt $FILE_COUNT ]; do
FILE_COUNT=$[$FILE_COUNT-1]
FILE_TO_DEL=$(ls -t | tail -n1)
# be careful with this one
rm -rf "$FILE_TO_DEL"
done
fi
Explanation:
FILE_COUNT=$(ls -l | grep -c ^d ) counts all files in the current folder. Instead of grep we could use also wc -l but wc was not installed on that host.
FILE_COUNT=$[$FILE_COUNT-1] update the current $FILE_COUNT
FILE_TO_DEL=$(ls -t | tail -n1) Save the oldest file name in the $FILE_TO_DEL variable. tail -n1 returns the last element in the list.
Based on others suggestions and some awk foo, I got this to work. I know this an old thread, but I didn't find a decent answer here and this sorted it for me. This just deletes the oldest file, but you can change the head -n 1 to 10 and get the oldest 10.
find $DIR -type f -printf '%T+ %p\n' | sort | head -n 1 | awk '{first =$1; $1 =""; print $0}' | xargs -d '\n' rm
Using inode numbers via stat & find command (to avoid pesky-chars-in-file-name issues):
stat -f "%m %i" * | sort -rn -k 1,1 | tail -n +11 | cut -d " " -f 2 | \
xargs -n 1 -I '{}' find "$(pwd)" -type f -inum '{}' -print
#stat -f "%m %i" * | sort -rn -k 1,1 | tail -n +11 | cut -d " " -f 2 | \
# xargs -n 1 -I '{}' find "$(pwd)" -type f -inum '{}' -delete
I am writing a script in bash on Linux and need to go through all subdirectory names in a given directory. How can I loop through these directories (and skip regular files)?
For example:
the given directory is /tmp/
it has the following subdirectories: /tmp/A, /tmp/B, /tmp/C
I want to retrieve A, B, C.
All answers so far use find, so here's one with just the shell. No need for external tools in your case:
for dir in /tmp/*/ # list directories in the form "/tmp/dirname/"
do
dir=${dir%*/} # remove the trailing "/"
echo "${dir##*/}" # print everything after the final "/"
done
cd /tmp
find . -maxdepth 1 -mindepth 1 -type d -printf '%f\n'
A short explanation:
find finds files (quite obviously)
. is the current directory, which after the cd is /tmp (IMHO this is more flexible than having /tmp directly in the find command. You have only one place, the cd, to change, if you want more actions to take place in this folder)
-maxdepth 1 and -mindepth 1 make sure that find only looks in the current directory and doesn't include . itself in the result
-type d looks only for directories
-printf '%f\n prints only the found folder's name (plus a newline) for each hit.
Et voilà!
You can loop through all directories including hidden directrories (beginning with a dot) with:
for file in */ .*/ ; do echo "$file is a directory"; done
note: using the list */ .*/ works in zsh only if there exist at least one hidden directory in the folder. In bash it will show also . and ..
Another possibility for bash to include hidden directories would be to use:
shopt -s dotglob;
for file in */ ; do echo "$file is a directory"; done
If you want to exclude symlinks:
for file in */ ; do
if [[ -d "$file" && ! -L "$file" ]]; then
echo "$file is a directory";
fi;
done
To output only the trailing directory name (A,B,C as questioned) in each solution use this within the loops:
file="${file%/}" # strip trailing slash
file="${file##*/}" # strip path and leading slash
echo "$file is the directoryname without slashes"
Example (this also works with directories which contains spaces):
mkdir /tmp/A /tmp/B /tmp/C "/tmp/ dir with spaces"
for file in /tmp/*/ ; do file="${file%/}"; echo "${file##*/}"; done
Works with directories which contains spaces
Inspired by Sorpigal
while IFS= read -d $'\0' -r file ; do
echo $file; ls $file ;
done < <(find /path/to/dir/ -mindepth 1 -maxdepth 1 -type d -print0)
Original post (Does not work with spaces)
Inspired by Boldewyn: Example of loop with find command.
for D in $(find /path/to/dir/ -mindepth 1 -maxdepth 1 -type d) ; do
echo $D ;
done
find . -mindepth 1 -maxdepth 1 -type d -printf "%P\n"
The technique I use most often is find | xargs. For example, if you want to make every file in this directory and all of its subdirectories world-readable, you can do:
find . -type f -print0 | xargs -0 chmod go+r
find . -type d -print0 | xargs -0 chmod go+rx
The -print0 option terminates with a NULL character instead of a space. The -0 option splits its input the same way. So this is the combination to use on files with spaces.
You can picture this chain of commands as taking every line output by find and sticking it on the end of a chmod command.
If the command you want to run as its argument in the middle instead of on the end, you have to be a bit creative. For instance, I needed to change into every subdirectory and run the command latemk -c. So I used (from Wikipedia):
find . -type d -depth 1 -print0 | \
xargs -0 sh -c 'for dir; do pushd "$dir" && latexmk -c && popd; done' fnord
This has the effect of for dir $(subdirs); do stuff; done, but is safe for directories with spaces in their names. Also, the separate calls to stuff are made in the same shell, which is why in my command we have to return back to the current directory with popd.
a minimal bash loop you can build off of (based off ghostdog74 answer)
for dir in directory/*
do
echo ${dir}
done
to zip a whole bunch of files by directory
for dir in directory/*
do
zip -r ${dir##*/} ${dir}
done
If you want to execute multiple commands in a for loop, you can save the result of find with mapfile (bash >= 4) as a variable and go through the array with ${dirlist[#]}. It also works with directories containing spaces.
The find command is based on the answer by Boldewyn. Further information about the find command can be found there.
IFS=""
mapfile -t dirlist < <( find . -maxdepth 1 -mindepth 1 -type d -printf '%f\n' )
for dir in ${dirlist[#]}; do
echo ">${dir}<"
# more commands can go here ...
done
TL;DR:
(cd /tmp; for d in */; do echo "${d%/}"; done)
Explanation.
There's no need to use external programs. What you need is a shell globbing pattern. To avoid the need of removing /tmp afterward, I'm running it in a subshell, which may or not be suitable for your purposes.
Shell globbing patterns in a nutshell:
* Match any non-empty string any number of times.
? Match exactly one character.
[...] Matches with a character from between the brackets. You can also specify ranges ([a-z], [A-F0-9], etc.) or classes ([:digit:], [:alpha:], etc.).
[^...] Match one of the characters not between the braces.
* If no file names match the pattern, the shell will return the pattern unchanged. Any character or string that is not one of the above represents itself.
Consequently, the pattern */ will match any file name that ends with a /. A trailing / in a file name unambiguously identifies a directory.
The last bit is removing the trailing slash, which is achieved with the variable substitution ${var%PATTERN}, which removes the shortest matching pattern from the end of the string contained in var, and where PATTERN is any valid globbing pattern. So we write ${d%/}, meaning we want to remove the trailing slash from the string represented by d.
find . -type d -maxdepth 1
In short, put the results of find into an array and iterate the array and do what you want. Not the quickest but more organized thinking.
#!/bin/bash
cd /tmp
declare -a results=(`find -type d`)
#Iterate the results
for path in ${results[#]}
do
echo "Your path is $path"
#Do something with the path..
if [[ $path =~ "/A" ]]; then
echo $path | awk -F / '{print $NF}'
#prints A
elif [[ $path =~ "/B" ]]; then
echo $path | awk -F / '{print $NF}'
#Prints B
elif [[ $path =~ "/C" ]]; then
echo $path | awk -F / '{print $NF}'
#Prints C
fi
done
This can be reduced to find -type d | grep "/A" | awk -F / '{print $NF}' prints A
find -type d | grep "/B" | awk -F / '{print $NF}' prints B
find -type d | grep "/C" | awk -F / '{print $NF}' prints C
How can I move all files except one? I am looking for something like:
'mv ~/Linux/Old/!Tux.png ~/Linux/New/'
where I move old stuff to new stuff -folder except Tux.png. !-sign represents a negation. Is there some tool for the job?
If you use bash and have the extglob shell option set (which is usually the case):
mv ~/Linux/Old/!(Tux.png) ~/Linux/New/
Put the following to your .bashrc
shopt -s extglob
It extends regexes.
You can then move all files except one by
mv !(fileOne) ~/path/newFolder
Exceptions in relation to other commands
Note that, in copying directories, the forward-flash cannot be used in the name as noticed in the thread Why extglob except breaking except condition?:
cp -r !(Backups.backupdb) /home/masi/Documents/
so Backups.backupdb/ is wrong here before the negation and I would not use it neither in moving directories because of the risk of using wrongly then globs with other commands and possible other exceptions.
I would go with the traditional find & xargs way:
find ~/Linux/Old -maxdepth 1 -mindepth 1 -not -name Tux.png -print0 |
xargs -0 mv -t ~/Linux/New
-maxdepth 1 makes it not search recursively. If you only care about files, you can say -type f. -mindepth 1 makes it not include the ~/Linux/Old path itself into the result. Works with any filenames, including with those that contain embedded newlines.
One comment notes that the mv -t option is a probably GNU extension. For systems that don't have it
find ~/Linux/Old -maxdepth 1 -mindepth 1 -not -name Tux.png \
-exec mv '{}' ~/Linux/New \;
A quick way would be to modify the tux filename so that your move command will not match.
For example:
mv Tux.png .Tux.png
mv * ~/somefolder
mv .Tux.png Tux.png
I think the easiest way to do is with backticks
mv `ls -1 ~/Linux/Old/ | grep -v Tux.png` ~/Linux/New/
Edit:
Use backslash with ls instead to prevent using it with alias, i.e. mostly ls is aliased as ls --color.
mv `\ls -1 ~/Linux/Old/ | grep -v Tux.png` ~/Linux/New/
Thanks #Arnold Roa
For bash, sth answer is correct. Here is the zsh (my shell of choice) syntax:
mv ~/Linux/Old/^Tux.png ~/Linux/New/
Requires EXTENDED_GLOB shell option to be set.
I find this to be a bit safer and easier to rely on for simple moves that exclude certain files or directories.
ls -1 | grep -v ^$EXCLUDE | xargs -I{} mv {} $TARGET
This could be simpler and easy to remember and it works for me.
mv $(ls ~/folder | grep -v ~/folder/exclude.png) ~/destination
The following is not a 100% guaranteed method, and should not at all be attempted for scripting. But some times it is good enough for quick interactive shell usage. A file file glob like
[abc]*
(which will match all files with names starting with a, b or c) can be negated by inserting a "^" character first, i.e.
[^abc]*
I sometimes use this for not matching the "lost+found" directory, like for instance:
mv /mnt/usbdisk/[^l]* /home/user/stuff/.
Of course if there are other files starting with l I have to process those afterwards.
How about:
mv $(echo * | sed s:Tux.png::g) ~/Linux/New/
You have to be in the folder though.
This can bei done without grep like this:
ls ~/Linux/Old/ -QI Tux.png | xargs -I{} mv ~/Linux/Old/{} ~/Linux/New/
Note: -I is a captial i and makes the ls command ignore the Tux.png file, which is listed afterwards.
The output of ls is then piped into mv via xargs, which allows to use the output of ls as source argument for mv.
ls -Q just quotes the filenames listed by ls.
mv `find Linux/Old '!' -type d | fgrep -v Tux.png` Linux/New
The find command lists all regular files and the fgrep command filters out any Tux.png. The backticks tell mv to move the resulting file list.
ls ~/Linux/Old/ | grep -v Tux.png | xargs -i {} mv ~/Linux/New/'
move all files(not include except file) to except_file
find -maxdepth 1 -mindepth 1 -not -name except_file -print0 |xargs -0 mv -t ./except_file
for example(cache is current except file)
find -maxdepth 1 -mindepth 1 -not -name cache -print0 |xargs -0 mv -t ./cache