I am facing an issue with calling chaincode to store asset after pushing few 100 records. I am getting an error in my node application logs.
2021-03-08T10:04:09.498Z - error: [EventService]: on.data [peer1.org1.example.com,peer1.org1.example.com] - #11- unexpected deliverResponse status received - 404
If I restart the node application, it starts working again for storing few 100 records and then the same issue comes back. I try to search in google regarding this, but I couldn´t find any helpful resource. Can anyone help me.
Check the clock of your system.
I you are on Ubuntu use
sudo timedatectl set-ntp off
sudo timedatectl set-ntp on
Related
I've been going through the Azure IoT Edge documentation to connect a Raspberry Pi 4 using Raspbian Stretch to the Azure Cloud. The IoT Edge daemon is 'active (running)' but when I run 'iotedge check' I get the following error:
pi#raspberrypi:~$iotedge check --verbose
Configuration checks
--------------------
x config.yaml is well-formed - Error
Could not open file /etc/iotedge/config.yaml. You might need to run this command as a root.
caused by: Permission denied (os error 13)
0 check(s) succeeded.
1 check(s) raised errors.
I am fairly new to this so may have made an obvious error but can't find anything on google, Azure or Stack Overflow that applies. Any help would be much appreciated!
try to run the command with, as the command requires the priviledge to open the file:
sudo iotedge check
I have my community 4.1.1 neo4j service installed on the ubuntu commandline running on my windows machine. I have been using neo4j steadily for a month or two now, just recently it has prevented me from accessing the neo4j database, it will say this in neo4j browser:
Database 'neo4j' is unavailable. Run :sysinfo for more info.
I have tried uninstalling neo4j and reinstalling but that has not worked either. I tried playing around with the default listen address previously, but now with the reinstall all config data is back to normal. Running ./neo4j-community-4.1.1/bin/cypher-shell under bin does not work. It says:
Unable to establish connection in 3000ms
If I run ./neo4j-community-4.1.1/bin/cypher-shell -a 192.168.0.19 it says:
Database 'neo4j' is unavailable
When I run ./neo4j-community-4.1.1/bin/neo4j-admin check-consistency --database=neo4j it also states:
.2020-08-18 22:12:16.868+0000 WARN [o.n.c.ConsistencyCheckService] Index was dirty on startup which means it was not shutdown correctly and need to be cleaned up with a successful recovery. Index file: /home/thomp105/neo4j-community-4.1.1/data/databases/neo4j/neostore.relationshipgroupstore.db.id.
I would love to reset everything from scratch but I am unsure how
At this point I cannot even access the browser at localhost:7474. It hangs indefinitely trying to load.
I am truly stumped. Anyone have any advice on how I navigate this issue?
It's not easy to guess the issue without seeing your system, but may I ask if you can try to delete your default database, i.e. neo4j physically from the disk (e.g. rm -rf /home/thomp105/neo4j-community-4.1.1/data/databases/neo4j/), and then try to create another database with different name instead (open neo4j.conf, search for dbms.active_database, which point out on default database, and change it to some other name)?
I had this problem running on a linux server. The server was up but got this error on any query: Database 'neo4j' is unavailable. To troubleshoot I ran sudo neo4j console and the problem went away. When I ran the console as user ne04j the problem came back.
$ /usr/share/neo4j/bin/neo4j console
Directories in use:
home: /var/lib/neo4j
config: /etc/neo4j
logs: /var/log/neo4j
plugins: /var/lib/neo4j/plugins
import: /var/lib/neo4j/import
data: /var/lib/neo4j/data
certificates: /var/lib/neo4j/certificates
run: /var/run/neo4j
So I tried: sudo chown -R neo4j:neo4j /var/lib/neo4j/data and the problem went away. Apparently when I'd done a restore of the database I'd run the neo4j server as root and when the system runs neo4j it does it as the user neo4j so couldn't read any of its data. It seems that an error like this would warrant an easy to parse error message but verbosity is not the neo4j way.
Description
I'm crawling the website :bjx.com and all codes can be run in the local.Then I put the code on the Amazon service and run ,it failed.
What I have Done
I guess that maybe the website block the server and I have tried some ways :
1) curl http://guangfu.bjx.com.cn/xtgc/List.aspx?classid=583
2) wget http://guangfu.bjx.com.cn/xtgc/List.aspx?classid=583
err msg as follows:
Resolving news.bjx.com.cn (news.bjx.com.cn)... 114.113.145.103
Connecting to news.bjx.com.cn (news.bjx.com.cn)|114.113.145.103|:80... failed: Connection timed out.
Retrying.
--2019-04-23 05:45:00-- (try: 2) http://news.bjx.com.cn/list
Connecting to news.bjx.com.cn (news.bjx.com.cn)|114.113.145.103|:80...
some reference:
https://serverfault.com/questions/124952/testing-a-website-from-linux-command-line
My question :
how to confirm whether the website has blocked me and if blocked, what can I do to solve the issue and crawl the website, thanks
How about to make the program failed with particular timeout setting?
For example, to make curl failed if it can't get response within 10 seconds
curl -m 10
And, to go over these issues, you can try to run the spiders with Proxy of VPN networking
I've successfully completed the ./install.sh command. When I run the next "~/mcdev start -o" I receive this error: "Starting Microclimate
Pulling microclimate-file-watcher (ibmcom/microclimate-file-watcher:1809)...
ERROR: Get https://registry-1.docker.io/v2/ibmcom/microclimate-file-watcher/manifests/1809: net/http: TLS handshake timeout
Error starting Microclimate"
I have running on my pc:
git version 2.17.1 (Apple Git-112); Docker version 18.06.1-ce; MacOS
High Sierra v 10.13.6; latest Microclimate v18.09
My network is up and I don't have any proxy.
What am I missing or doing wrong?
I got this to work by changing to a different wifi \ internet connection. Still not sure why my home wifi, with no restrictions that I'm aware of, will 'block' the dependency downloads upon start of Microclimate.
If anybody has additional info to help find the root cause please feel free to share.
This docker error generally shows up when your internet connection is too slow for Docker, as it times out performing the TLS handshake. This would also explain why moving to another network fixes the issue.
I have a Centos 6.4 x64 server with epel repo enabled. I installed couchdb via the yum package manager (version 1.0.4) with no errors. I edited the /etc/couchdb/local.ini file with my port (default 5984) and server ip address. Whenever I run the service couchdb start, it returns the ok message:
Starting couchdb: [ OK ]
However, if I run a service couchdb status right after, I get this:
couchdb dead but pid file exists
and, of course, the server does not work.
The weird part is that service couchdb start always returns the success message, although the server never actually runs. Also, there is no log files created at all by couchdb (my /var/log/couchdb/ folder is empty - doubled checked couchdb configuration files for the path).
When I delete the /var/run/subsys/couchdb.pid file, service shows couchdb as not started, and when I try to restart couchdb (service couchdb start), I get the success message again and so on.
Any help will be greatly appreciated. :)
EDIT: I forgot to mention that when I run couchdb it works fine (giving me only this warning warning: "TODO: max is currently unsupported"), so it is just the service that doesn't work.
May be there are so many instances running for couchdb you have to kill each and every and then restart the servcie. Hope it works fine.