I'm trying to create a custom data type. As an example
data Time = Second Int deriving (Show)
However, this is too limiting (we could say later need milliseconds). I would like to instead define something like this:
data Time = Second Num deriving (Show)
This doesn't compile because Num has kind * -> ghc-prim-0.4.0.0:GHC.Prim.Constraint
How do I setup Time such that Second may contain any Num?
One of the best examples of why this might not be so desirable is found here at the Wikibooks section on Classes and Types. They say:
Type constraints in data declarations are less useful than it might seem at first. Consider:
data (Num a) => Foo a = F1 a | F2 a String
Here, Foo is a type with two constructors, both taking an argument of a type a which must be in Num. However, the (Num a) => constraint is only effective for the F1 and F2 constructors, and not for other functions involving Foo. Therefore, in the following example...
fooSquared :: (Num a) => Foo a -> Foo a
fooSquared (F1 x) = F1 (x * x)
fooSquared (F2 x s) = F2 (x * x) s
... even though the constructors ensure a will be some type in Num we can't avoid duplicating the constraint in the signature of fooSquared
This suggests that a reasonable option for you is to just create Time with a generic parameter, and then later ensure that the module functions that operate on Time data always have the necessary constraint for Num.
It won't be so much of a worry that someone goes off and foolishly makes Time String or something -- if they do, then none of the provided module functions are going to be helpful for them, so it doesn't matter so much.
There are also options to look up with GADTs, the {-# LANGUAGE GeneralizedNewtypeDeriving #-} pragma, and the {-# LANGUAGE DatatypeContexts #-} pragma. But usually these start to rope in unnecessary degrees of extra complexity, especially if you're a Haskell novice like me.
There is a deprecated feature called Datatype Contexts that allows you to do that:
{-# LANGUAGE DatatypeContexts #-}
data Num a => Time a = Second a deriving (Show)
t = Second (5 :: Int)
main = print t
This executes on GHC 7.8.3 (sorry, don't have 7.10 to check), but warns you about the deprecation:
t.hs:1:14: Warning:
-XDatatypeContexts is deprecated: It was widely considered a
misfeature, and has been removed from the Haskell language.
Second 5
A non-deprecated way to do it is to use Generalized Algebraic Datatypes (GADTs) (and you'll need standalone deriving as well):
{-# LANGUAGE GADTs, StandaloneDeriving #-}
data Time a where
Second :: Num a => a -> Time a
deriving instance Show a => Show (Time a)
t = Second (5 :: Int)
main = print t
If you try to create a variable with something non-Num, you'll get a compilation error:
t = Second "a"
t.hs:12:5:
No instance for (Num [Char]) arising from a use of ‘Second’
In the expression: Second "a"
In an equation for ‘t’: t = Second "a"
When I play with checking types of functions in Haskell with :t, for example like those in my previous question, I tend to get results such as:
Eq a => a -> [a] -> Bool
(Ord a, Num a, Ord a1, Num a1) => a -> a1 -> a
(Num t2, Num t1, Num t, Enum t2, Enum t1, Enum t) => [(t, t1, t2)]
It seems that this is not such a trivial question - how does the Haskell interpreter pick literals to symbolize typeclasses? When would it choose a rather than t? When would it choose a1 rather than b? Is it important from the programmer's point of view?
The names of the type variables aren't significant. The type:
Eq element => element -> [element] -> Bool
Is exactly the same as:
Eq a => a -> [a] -> Bool
Some names are simply easier to read/remember.
Now, how can an inferencer choose the best names for types?
Disclaimer: I'm absolutely not a GHC developer. However I'm working on a type-inferencer for Haskell in my bachelor thesis.
During inferencing the names chosen for the variables aren't probably that readable. In fact they are almost surely something along the lines of _N with N a number or aN with N a number.
This is due to the fact that you often have to "refresh" type variables in order to complete inferencing, so you need a fast way to create new names. And using numbered variables is pretty straightforward for this purpose.
The names displayed when inference is completed can be "pretty printed". The inferencer can rename the variables to use a, b, c and so on instead of _1, _2 etc.
The trick is that most operations have explicit type signatures. Some definitions require to quantify some type variables (class, data and instance for example).
All these names that the user explicitly provides can be used to display the type in a better way.
When inferencing you can somehow keep track of where the fresh type variables came from, in order to be able to rename them with something more sensible when displaying them to the user.
An other option is to refresh variables by adding a number to them. For example a fresh type of return could be Monad m0 => a0 -> m0 a0 (Here we know to use m and a simply because the class definition for Monad uses those names). When inferencing is finished you can get rid of the numbers and obtain the pretty names.
In general the inferencer will try to use names that were explicitly provided through signatures. If such a name was already used it might decide to add a number instead of using a different name (e.g. use b1 instead of c if b was already bound).
There are probably some other ad hoc rules. For example the fact that tuple elements have like t, t1, t2, t3 etc. is probably something done with a custom rule. In fact t doesn't appear in the signature for (,,) for example.
How does GHCi pick names for type variables? explains how many of these variable names come about. As Ganesh Sittampalam pointed out in a comment, something strange seems to be happening with arithmetic sequences. Both the Haskell 98 report and the Haskell 2010 report indicate that
[e1..] = enumFrom e1
GHCi, however, gives the following:
Prelude> :t [undefined..]
[undefined..] :: Enum t => [t]
Prelude> :t enumFrom undefined
enumFrom undefined :: Enum a => [a]
This makes it clear that the weird behavior has nothing to do with the Enum class itself, but rather comes in from some stage in translating the syntactic sequence to the enumFrom form. I wondered if maybe GHC wasn't really using that translation, but it really is:
{-# LANGUAGE NoMonomorphismRestriction #-}
module X (aoeu,htns) where
aoeu = [undefined..]
htns = enumFrom undefined
compiled using ghc -ddump-simpl enumlit.hs gives
X.htns :: forall a_aiD. GHC.Enum.Enum a_aiD => [a_aiD]
[GblId, Arity=1]
X.htns =
\ (# a_aiG) ($dEnum_aiH :: GHC.Enum.Enum a_aiG) ->
GHC.Enum.enumFrom # a_aiG $dEnum_aiH (GHC.Err.undefined # a_aiG)
X.aoeu :: forall t_aiS. GHC.Enum.Enum t_aiS => [t_aiS]
[GblId, Arity=1]
X.aoeu =
\ (# t_aiV) ($dEnum_aiW :: GHC.Enum.Enum t_aiV) ->
GHC.Enum.enumFrom # t_aiV $dEnum_aiW (GHC.Err.undefined # t_aiV)
so the only difference between these two representations is the assigned type variable name. I don't know enough about how GHC works to know where that t comes from, but at least I've narrowed it down!
Ørjan Johansen has noted in a comment that something similar seems to happen with function definitions and lambda abstractions.
Prelude> :t \x -> x
\x -> x :: t -> t
but
Prelude> :t map (\x->x) $ undefined
map (\x->x) $ undefined :: [b]
In the latter case, the type b comes from an explicit type signature given to map.
Are you familiar with the concepts of alpha equivalence and alpha substitution? This captures the notion that, for example, both of the following are completely equivalent and interconvertible (in certain circumstances) even though they differ:
\x -> (x, x)
\y -> (y, y)
The same concept can be extended to the level of types and type variables (see "System F" for further reading). Haskell in fact has a notion of "lambdas at the type level" for binding type variables, but it's hard to see because they're implicit by default. However, you can make them explicit by using the ExplicitForAll extension, and play around with explicitly binding your type variables:
ghci> :set -XExplicitForAll
ghci> let f x = x; f :: forall a. a -> a
In the second line, I use the forall keyword to introduce a new type variable, which is then used in a type.
In other words, it doesn't matter whether you choose a or t in your example, as long as the type expressions satisfy alpha-equivalence. Choosing type variable names so as to maximize human convenience is an entirely different topic, and probably far more complicated!
The function f below, for a given type 'a', takes a parameter of type 'c'. For different types 'a', 'c' is restricted in different ways. Concretely, when 'a' is any Integral type, 'c' should be allowed to be any 'Real' type. When 'a' is Float, 'c' can ONLY be Float.
One attempt is:
{-# LANGUAGE
MultiParamTypeClasses,
FlexibleInstances,
FunctionalDependencies,
UndecidableInstances #-}
class AllowedParamType a c | a -> c
class Foo a where
f :: (AllowedParamType a c) => c -> a
fIntegral :: (Integral a, Real c) => c -> a
fIntegral = error "implementation elided"
instance (Integral i, AllowedParamType i d, Real d) => Foo i where
f = fIntegral
For some reason, GHC 7.4.1 complains that it "could not deduce (Real c) arising from a use of fIntegral". It seems to me that the functional dependency should allow this deduction. In the instance, a is unified with i, so by the functional dependency, d should be unified with c, which in the instance is declared to be 'Real'. What am I missing here?
Functional dependencies aside, will this approach be expressive enough to enforce the restrictions above, or is there a better way? We are only working with a few different values for 'a', so there will be instances like:
instance (Integral i, Real c) => AllowedParamType i c
instance AllowedParamType Float Float
Thanks
A possibly better way, is to use constraint kinds and type families (GHC extensions, requires GHC 7.4, I think). This allows you to specify the constraint as part of the class instance.
{-# LANGUAGE ConstraintKinds, TypeFamilies, FlexibleInstances, UndecidableInstances #-}
import GHC.Exts (Constraint)
class Foo a where
type ParamConstraint a b :: Constraint
f :: ParamConstraint a b => b -> a
instance Integral i => Foo i where
type ParamConstraint i b = Real b
f = fIntegral
EDIT: Upon further experimentation, there are some subtleties that mean that this doesn't work as expected, specifically, type ParamConstraint i b = Real b is too general. I don't know a solution (or if one exists) right now.
OK, this one's been nagging at me. given the wide variety of instances,
let's go the whole hog and get rid of any relationship between the
source and target type other than the presence of an instance:
{-# LANGUAGE OverlappingInstances, FlexibleInstances,TypeSynonymInstances,MultiParamTypeClasses #-}
class Foo a b where f :: a -> b
Now we can match up pairs of types with an f between them however we like, for example:
instance Foo Int Int where f = (+1)
instance Foo Int Integer where f = toInteger.((7::Int) -)
instance Foo Integer Int where f = fromInteger.(^ (2::Integer))
instance Foo Integer Integer where f = (*100)
instance Foo Char Char where f = id
instance Foo Char String where f = (:[]) -- requires TypeSynonymInstances
instance (Foo a b,Functor f) => Foo (f a) (f b) where f = fmap f -- requires FlexibleInstances
instance Foo Float Int where f = round
instance Foo Integer Char where f n = head $ show n
This does mean a lot of explicit type annotation to avoid No instance for... and Ambiguous type error messages.
For example, you can't do main = print (f 6), but you can do main = print (f (6::Int)::Int)
You could list all of the instances with the standard types that you want,
which could lead to an awful lot of repetition, our you could light the blue touchpaper and do:
instance Integral i => Foo Double i where f = round -- requires FlexibleInstances
instance Real r => Foo Integer r where f = fromInteger -- requires FlexibleInstances
Beware: this does not mean "Hey, if you've got an integral type i,
you can have an instance Foo Double i for free using this handy round function",
it means: "every time you have any type i, it's definitely an instance
Foo Double i. By the way, I'm using round for this, so unless your type i is Integral,
we're going to fall out." That's a big issue for the Foo Integer Char instance, for example.
This can easily break your other instances, so if you now type f (5::Integer) :: Integer you get
Overlapping instances for Foo Integer Integer
arising from a use of `f'
Matching instances:
instance Foo Integer Integer
instance Real r => Foo Integer r
You can change your pragmas to include OverlappingInstances:
{-# LANGUAGE OverlappingInstances, FlexibleInstances,TypeSynonymInstances,MultiParamTypeClasses #-}
So now f (5::Integer) :: Integer returns 500, so clearly it's using the more specific Foo Integer Integer instance.
I think this sort of approach might work for you, defining many instances by hand, carefully considering when to go completely wild
making instances out of standard type classes. (Alternatively, there aren't all that many standard types, and as we all know, notMany choose 2 = notIntractablyMany, so you could just list them all.)
Here's a suggestion to solve a more general problem, not yours specifically (I need more detail yet first - I promise to check later). I'm writing it in case other people are searching for a solution to a similar problem to you, I certainly was in the past, before I discovered SO. SO is especially great when it helps you try a radically new approach.
I used to have the work habit:
Introduce a multi-parameter type class (Types hanging out all over the place, so...)
Introduce functional dependencies (Should tidy it up but then I end up needing...)
Add FlexibleInstances (Alarm bells start ringing. There's a reason the compiler has this off by default...)
Add UndecidableInstances (GHC is telling you you're on your own, because it's not convinced it's up to the challenge you're setting it.)
Everything blows up. Refactor somehow.
Then I discovered the joys of type families (functional programming for types (hooray) - multi-parameter type classes are (a bit like) logic programming for types). My workflow changed to:
Introduce a type class including an associated type, i.e. replace
class MyProblematicClass a b | a -> b where
thing :: a -> b
thang :: b -> a -> b
with
class MyJustWorksClass a where
type Thing a :: * -- Thing a is a type (*), not a type constructor (* -> *)
thing :: a -> Thing a
thang :: Thing a -> a -> Thing a
Nervously add FlexibleInstances. Nothing goes wrong at all.
Sometimes fix things by using constraints like (MyJustWorksClass j,j~a)=> instead of (MyJustWorksClass a)=> or (Show t,t ~ Thing a,...)=> instead of (Show (Thing a),...) => to help ghc out. (~ essentially means 'is the same type as')
Nervously add FlexibleContexts. Nothing goes wrong at all.
Everything works.
The reason "Nothing goes wrong at all" is that ghc calculates the type Thing a using my type function Thang rather than trying to deduce it using a merely a bunch of assertions that there's a function there and it ought to be able to work it out.
Give it a go! Read Fun with Type Functions before reading the manual!
When metaprogramming, it may be useful (or necessary) to pass along to Haskell's type system information about types that's known to your program but not inferable in Hindley-Milner. Is there a library (or language extension, etc) that provides facilities for doing this—that is, programmatic type annotations—in Haskell?
Consider a situation where you're working with a heterogenous list (implemented using the Data.Dynamic library or existential quantification, say) and you want to filter the list down to a bog-standard, homogeneously typed Haskell list. You can write a function like
import Data.Dynamic
import Data.Typeable
dynListToList :: (Typeable a) => [Dynamic] -> [a]
dynListToList = (map fromJust) . (filter isJust) . (map fromDynamic)
and call it with a manual type annotation. For example,
foo :: [Int]
foo = dynListToList [ toDyn (1 :: Int)
, toDyn (2 :: Int)
, toDyn ("foo" :: String) ]
Here foo is the list [1, 2] :: [Int]; that works fine and you're back on solid ground where Haskell's type system can do its thing.
Now imagine you want to do much the same thing but (a) at the time you write the code you don't know what the type of the list produced by a call to dynListToList needs to be, yet (b) your program does contain the information necessary to figure this out, only (c) it's not in a form accessible to the type system.
For example, say you've randomly selected an item from your heterogenous list and you want to filter the list down by that type. Using the type-checking facilities supplied by Data.Typeable, your program has all the information it needs to do this, but as far as I can tell—this is the essence of the question—there's no way to pass it along to the type system. Here's some pseudo-Haskell that shows what I mean:
import Data.Dynamic
import Data.Typeable
randList :: (Typeable a) => [Dynamic] -> IO [a]
randList dl = do
tr <- randItem $ map dynTypeRep dl
return (dynListToList dl :: [<tr>]) -- This thing should have the type
-- represented by `tr`
(Assume randItem selects a random item from a list.)
Without a type annotation on the argument of return, the compiler will tell you that it has an "ambiguous type" and ask you to provide one. But you can't provide a manual type annotation because the type is not known at write-time (and can vary); the type is known at run-time, however—albeit in a form the type system can't use (here, the type needed is represented by the value tr, a TypeRep—see Data.Typeable for details).
The pseudo-code :: [<tr>] is the magic I want to happen. Is there any way to provide the type system with type information programatically; that is, with type information contained in a value in your program?
Basically I'm looking for a function with (pseudo-) type ??? -> TypeRep -> a that takes a value of a type unknown to Haskell's type system and a TypeRep and says, "Trust me, compiler, I know what I'm doing. This thing has the value represented by this TypeRep." (Note that this is not what unsafeCoerce does.)
Or is there something completely different that gets me the same place? For example, I can imagine a language extension that permits assignment to type variables, like a souped-up version of the extension enabling scoped type variables.
(If this is impossible or highly impractical,—e.g., it requires packing a complete GHCi-like interpreter into the executable—please try to explain why.)
No, you can't do this. The long and short of it is that you're trying to write a dependently-typed function, and Haskell isn't a dependently typed language; you can't lift your TypeRep value to a true type, and so there's no way to write down the type of your desired function. To explain this in a little more detail, I'm first going to show why the way you've phrased the type of randList doesn't really make sense. Then, I'm going to explain why you can't do what you want. Finally, I'll briefly mention a couple thoughts on what to actually do.
Existentials
Your type signature for randList can't mean what you want it to mean. Remembering that all type variables in Haskell are universally quantified, it reads
randList :: forall a. Typeable a => [Dynamic] -> IO [a]
Thus, I'm entitled to call it as, say, randList dyns :: IO [Int] anywhere I want; I must be able to provide a return value for all a, not simply for some a. Thinking of this as a game, it's one where the caller can pick a, not the function itself. What you want to say (this isn't valid Haskell syntax, although you can translate it into valid Haskell by using an existential data type1) is something more like
randList :: [Dynamic] -> (exists a. Typeable a => IO [a])
This promises that the elements of the list are of some type a, which is an instance of Typeable, but not necessarily any such type. But even with this, you'll have two problems. First, even if you could construct such a list, what could you do with it? And second, it turns out that you can't even construct it in the first place.
Since all that you know about the elements of the existential list is that they're instances of Typeable, what can you do with them? Looking at the documentation, we see that there are only two functions2 which take instances of Typeable:
typeOf :: Typeable a => a -> TypeRep, from the type class itself (indeed, the only method therein); and
cast :: (Typeable a, Typeable b) => a -> Maybe b (which is implemented with unsafeCoerce, and couldn't be written otherwise).
Thus, all that you know about the type of the elements in the list is that you can call typeOf and cast on them. Since we'll never be able to usefully do anything else with them, our existential might just as well be (again, not valid Haskell)
randList :: [Dynamic] -> IO [(TypeRep, forall b. Typeable b => Maybe b)]
This is what we get if we apply typeOf and cast to every element of our list, store the results, and throw away the now-useless existentially typed original value. Clearly, the TypeRep part of this list isn't useful. And the second half of the list isn't either. Since we're back to a universally-quantified type, the caller of randList is once again entitled to request that they get a Maybe Int, a Maybe Bool, or a Maybe b for any (typeable) b of their choosing. (In fact, they have slightly more power than before, since they can instantiate different elements of the list to different types.) But they can't figure out what type they're converting from unless they already know it—you've still lost the type information you were trying to keep.
And even setting aside the fact that they're not useful, you simply can't construct the desired existential type here. The error arises when you try to return the existentially-typed list (return $ dynListToList dl). At what specific type are you calling dynListToList? Recall that dynListToList :: forall a. Typeable a => [Dynamic] -> [a]; thus, randList is responsible for picking which a dynListToList is going to use. But it doesn't know which a to pick; again, that's the source of the question! So the type that you're trying to return is underspecified, and thus ambiguous.3
Dependent types
OK, so what would make this existential useful (and possible)? Well, we actually have slightly more information: not only do we know there's some a, we have its TypeRep. So maybe we can package that up:
randList :: [Dynamic] -> (exists a. Typeable a => IO (TypeRep,[a]))
This isn't quite good enough, though; the TypeRep and the [a] aren't linked at all. And that's exactly what you're trying to express: some way to link the TypeRep and the a.
Basically, your goal is to write something like
toType :: TypeRep -> *
Here, * is the kind of all types; if you haven't seen kinds before, they are to types what types are to values. * classifies types, * -> * classifies one-argument type constructors, etc. (For instance, Int :: *, Maybe :: * -> *, Either :: * -> * -> *, and Maybe Int :: *.)
With this, you could write (once again, this code isn't valid Haskell; in fact, it really bears only a passing resemblance to Haskell, as there's no way you could write it or anything like it within Haskell's type system):
randList :: [Dynamic] -> (exists (tr :: TypeRep).
Typeable (toType tr) => IO (tr, [toType tr]))
randList dl = do
tr <- randItem $ map dynTypeRep dl
return (tr, dynListToList dl :: [toType tr])
-- In fact, in an ideal world, the `:: [toType tr]` signature would be
-- inferable.
Now, you're promising the right thing: not that there exists some type which classifies the elements of the list, but that there exists some TypeRep such that its corresponding type classifies the elements of the list. If only you could do this, you would be set. But writing toType :: TypeRep -> * is completely impossible in Haskell: doing this requires a dependently-typed language, since toType tr is a type which depends on a value.
What does this mean? In Haskell, it's perfectly acceptable for values to depend on other values; this is what a function is. The value head "abc", for instance, depends on the value "abc". Similarly, we have type constructors, so it's acceptable for types to depend on other types; consider Maybe Int, and how it depends on Int. We can even have values which depend on types! Consider id :: a -> a. This is really a family of functions: id_Int :: Int -> Int, id_Bool :: Bool -> Bool, etc. Which one we have depends on the type of a. (So really, id = \(a :: *) (x :: a) -> x; although we can't write this in Haskell, there are languages where we can.)
Crucially, however, we can never have a type that depends on a value. We might want such a thing: imagine Vec 7 Int, the type of length-7 lists of integers. Here, Vec :: Nat -> * -> *: a type whose first argument must be a value of type Nat. But we can't write this sort of thing in Haskell.4 Languages which support this are called dependently-typed (and will let us write id as we did above); examples include Coq and Agda. (Such languages often double as proof assistants, and are generally used for research work as opposed to writing actual code. Dependent types are hard, and making them useful for everyday programming is an active area of research.)
Thus, in Haskell, we can check everything about our types first, throw away all that information, and then compile something that refers only to values. In fact, this is exactly what GHC does; since we can never check types at run-time in Haskell, GHC erases all the types at compile-time without changing the program's run-time behavior. This is why unsafeCoerce is easy to implement (operationally) and completely unsafe: at run-time, it's a no-op, but it lies to the type system. Consequently, something like toType is completely impossible to implement in the Haskell type system.
In fact, as you noticed, you can't even write down the desired type and use unsafeCoerce. For some problems, you can get away with this; we can write down the type for the function, but only implement it with by cheating. That's exactly how fromDynamic works. But as we saw above, there's not even a good type to give to this problem from within Haskell. The imaginary toType function allows you to give the program a type, but you can't even write down toType's type!
What now?
So, you can't do this. What should you do? My guess is that your overall architecture isn't ideal for Haskell, although I haven't seen it; Typeable and Dynamic don't actually show up that much in Haskell programs. (Perhaps you're "speaking Haskell with a Python accent", as they say.) If you only have a finite set of data types to deal with, you might be able to bundle things into a plain old algebraic data type instead:
data MyType = MTInt Int | MTBool Bool | MTString String
Then you can write isMTInt, and just use filter isMTInt, or filter (isSameMTAs randomMT).
Although I don't know what it is, there's probably a way you could unsafeCoerce your way through this problem. But frankly, that's not a good idea unless you really, really, really, really, really, really know what you're doing. And even then, it's probably not. If you need unsafeCoerce, you'll know, it won't just be a convenience thing.
I really agree with Daniel Wagner's comment: you're probably going to want to rethink your approach from scratch. Again, though, since I haven't seen your architecture, I can't say what that will mean. Maybe there's another Stack Overflow question in there, if you can distill out a concrete difficulty.
1 That looks like the following:
{-# LANGUAGE ExistentialQuantification #-}
data TypeableList = forall a. Typeable a => TypeableList [a]
randList :: [Dynamic] -> IO TypeableList
However, since none of this code compiles anyway, I think writing it out with exists is clearer.
2 Technically, there are some other functions which look relevant, such as toDyn :: Typeable a => a -> Dynamic and fromDyn :: Typeable a => Dynamic -> a -> a. However, Dynamic is more or less an existential wrapper around Typeables, relying on typeOf and TypeReps to know when to unsafeCoerce (GHC uses some implementation-specific types and unsafeCoerce, but you could do it this way, with the possible exception of dynApply/dynApp), so toDyn doesn't do anything new. And fromDyn doesn't really expect its argument of type a; it's just a wrapper around cast. These functions, and the other similar ones, don't provide any extra power that isn't available with just typeOf and cast. (For instance, going back to a Dynamic isn't very useful for your problem!)
3 To see the error in action, you can try to compile the following complete Haskell program:
{-# LANGUAGE ExistentialQuantification #-}
import Data.Dynamic
import Data.Typeable
import Data.Maybe
randItem :: [a] -> IO a
randItem = return . head -- Good enough for a short and non-compiling example
dynListToList :: Typeable a => [Dynamic] -> [a]
dynListToList = mapMaybe fromDynamic
data TypeableList = forall a. Typeable a => TypeableList [a]
randList :: [Dynamic] -> IO TypeableList
randList dl = do
tr <- randItem $ map dynTypeRep dl
return . TypeableList $ dynListToList dl -- Error! Ambiguous type variable.
Sure enough, if you try to compile this, you get the error:
SO12273982.hs:17:27:
Ambiguous type variable `a0' in the constraint:
(Typeable a0) arising from a use of `dynListToList'
Probable fix: add a type signature that fixes these type variable(s)
In the second argument of `($)', namely `dynListToList dl'
In a stmt of a 'do' block: return . TypeableList $ dynListToList dl
In the expression:
do { tr <- randItem $ map dynTypeRep dl;
return . TypeableList $ dynListToList dl }
But as is the entire point of the question, you can't "add a type signature that fixes these type variable(s)", because you don't know what type you want.
4 Mostly. GHC 7.4 has support for lifting types to kinds and for kind polymorphism; see section 7.8, "Kind polymorphism and promotion", in the GHC 7.4 user manual. This doesn't make Haskell dependently typed—something like TypeRep -> * example is still out5—but you will be able to write Vec by using very expressive types that look like values.
5 Technically, you could now write down something which looks like it has the desired type: type family ToType :: TypeRep -> *. However, this takes a type of the promoted kind TypeRep, and not a value of the type TypeRep; and besides, you still wouldn't be able to implement it. (At least I don't think so, and I can't see how you would—but I am not an expert in this.) But at this point, we're pretty far afield.
What you're observing is that the type TypeRep doesn't actually carry any type-level information along with it; only term-level information. This is a shame, but we can do better when we know all the type constructors we care about. For example, suppose we only care about Ints, lists, and function types.
{-# LANGUAGE GADTs, TypeOperators #-}
import Control.Monad
data a :=: b where Refl :: a :=: a
data Dynamic where Dynamic :: TypeRep a -> a -> Dynamic
data TypeRep a where
Int :: TypeRep Int
List :: TypeRep a -> TypeRep [a]
Arrow :: TypeRep a -> TypeRep b -> TypeRep (a -> b)
class Typeable a where typeOf :: TypeRep a
instance Typeable Int where typeOf = Int
instance Typeable a => Typeable [a] where typeOf = List typeOf
instance (Typeable a, Typeable b) => Typeable (a -> b) where
typeOf = Arrow typeOf typeOf
congArrow :: from :=: from' -> to :=: to' -> (from -> to) :=: (from' -> to')
congArrow Refl Refl = Refl
congList :: a :=: b -> [a] :=: [b]
congList Refl = Refl
eq :: TypeRep a -> TypeRep b -> Maybe (a :=: b)
eq Int Int = Just Refl
eq (Arrow from to) (Arrow from' to') = liftM2 congArrow (eq from from') (eq to to')
eq (List t) (List t') = liftM congList (eq t t')
eq _ _ = Nothing
eqTypeable :: (Typeable a, Typeable b) => Maybe (a :=: b)
eqTypeable = eq typeOf typeOf
toDynamic :: Typeable a => a -> Dynamic
toDynamic a = Dynamic typeOf a
-- look ma, no unsafeCoerce!
fromDynamic_ :: TypeRep a -> Dynamic -> Maybe a
fromDynamic_ rep (Dynamic rep' a) = case eq rep rep' of
Just Refl -> Just a
Nothing -> Nothing
fromDynamic :: Typeable a => Dynamic -> Maybe a
fromDynamic = fromDynamic_ typeOf
All of the above is pretty standard. For more on the design strategy, you'll want to read about GADTs and singleton types. Now, the function you want to write follows; the type is going to look a bit daft, but bear with me.
-- extract only the elements of the list whose type match the head
firstOnly :: [Dynamic] -> Dynamic
firstOnly [] = Dynamic (List Int) []
firstOnly (Dynamic rep v:xs) = Dynamic (List rep) (v:go xs) where
go [] = []
go (Dynamic rep' v:xs) = case eq rep rep' of
Just Refl -> v : go xs
Nothing -> go xs
Here we've picked a random element (I rolled a die, and it came up 1) and extracted only the elements that have a matching type from the list of dynamic values. Now, we could have done the same thing with regular boring old Dynamic from the standard libraries; however, what we couldn't have done is used the TypeRep in a meaningful way. I now demonstrate that we can do so: we'll pattern match on the TypeRep, and then use the enclosed value at the specific type the TypeRep tells us it is.
use :: Dynamic -> [Int]
use (Dynamic (List (Arrow Int Int)) fs) = zipWith ($) fs [1..]
use (Dynamic (List Int) vs) = vs
use (Dynamic Int v) = [v]
use (Dynamic (Arrow (List Int) (List (List Int))) f) = concat (f [0..5])
use _ = []
Note that on the right-hand sides of these equations, we are using the wrapped value at different, concrete types; the pattern match on the TypeRep is actually introducing type-level information.
You want a function that chooses a different type of values to return based on runtime data. Okay, great. But the whole purpose of a type is to tell you what operations can be performed on a value. When you don't know what type will be returned from a function, what do you do with the values it returns? What operations can you perform on them? There are two options:
You want to read the type, and perform some behaviour based on which type it is. In this case you can only cater for a finite list of types known in advance, essentially by testing "is it this type? then we do this operation...". This is easily possible in the current Dynamic framework: just return the Dynamic objects, using dynTypeRep to filter them, and leave the application of fromDynamic to whoever wants to consume your result. Moreover, it could well be possible without Dynamic, if you don't mind setting the finite list of types in your producer code, rather than your consumer code: just use an ADT with a constructor for each type, data Thing = Thing1 Int | Thing2 String | Thing3 (Thing,Thing). This latter option is by far the best if it is possible.
You want to perform some operation that works across a family of types, potentially some of which you don't know about yet, e.g. by using type class operations. This is trickier, and it's tricky conceptually too, because your program is not allowed to change behaviour based on whether or not some type class instance exists – it's an important property of the type class system that the introduction of a new instance can either make a program type check or stop it from type checking, but it can't change the behaviour of a program. Hence you can't throw an error if your input list contains inappropriate types, so I'm really not sure that there's anything you can do that doesn't essentially involve falling back to the first solution at some point.
Is it possible to do the following:
foo = bar
where
type A = (Some, Huge, Type, Sig)
meh :: A -> (A, A) -> A
I only need to use this custom type inside the where clause, so it does not make sense to define it globally.
This isn't possible. Why not just define it above the function? You don't have to export it from the module (just use an explicit export list).
By the way, if you really do have a type that big, it's probably a sign that you should factor it into smaller parts, especially if you have a lot of tuples as your example suggests; data-types would be more appropriate.
Actually, there's one, slightly ridiculous, way to approximate this:
{-# LANGUAGE TypeFamilies #-}
{-# LANGUAGE ScopedTypeVariables #-}
foo :: forall abbrv. (abbrv ~ (Some, Huge, Type, Sig))
=> abbrv -> abbrv
foo x = meh x (x, x)
where meh :: abbrv -> (abbrv, abbrv) -> abbrv
meh x y = {- ... -}
I can't really recommend enabling two language extensions just for the sake of abbreviating types in signatures, though if you're already using them (or GADTs instead of type families) I suppose it doesn't really hurt anything.
Silliness aside, you should consider refactoring your types in cases like this, as ehird suggests.